AirTies - Air 2315 Wifi adaptör için kext var mı?
- Konuyu başlatan titan80
- Başlangıç Tarihi
- Mesaj 7
- Görüntüleme 3.257
- Katılım
- 24 Mayıs 2014
- Mesajlar
- 7.877
- Makaleler
- 60
- Çözümler
- 3
Daha fazla
- Cinsiyet
- Erkek
Bunun kullandığı sürücü modeli nedir? Atheros, Realtek? Bunları bilmek lazım.
- Katılım
- 24 Mayıs 2014
- Mesajlar
- 7.877
- Makaleler
- 60
- Çözümler
- 3
Daha fazla
- Cinsiyet
- Erkek
Atheros 9271 için bir çözüm yok maalesef.
Daha fazla
- Cinsiyet
- Erkek
- Meslek
- grafiker
Bir yolu var... Makinene Parallels kuracaksın onun üzerine xp yada windows 7 yükleyeceksin interneti paylaşacaksın... Bu dolaylı yol.. Yada usb wifi aygıtı alacaksın uyumlu.. Bu da yapılış yolu ingilizce.. Proper ingilizce bilmene gerek yok adımları takip et çözersin.
Requirements:
1) Working Wireless USB
2) Parallels
3) Windows XP (of course other OS could work, but I'll cover XP for this tutorial)
Lets get to work
1) Download and install Parallels
2) Install Windows XP in Parallels.
3) Before or After installation, change Parallels networking type to Host-Only
4) Go to Parallels Desktop > Preferences > Network and uncheck 'Enable DHCP scope for host-only networking'
5) Go to OSX System preferences > Network. Show 'Built-in Ethernet'.
6) Change Configure IPv4 to Manually
7) Set IP Address to 192.168.0.5 (or anything within 192.168.0.2 to 192.168.0.254)
8) Set Subnet Mask to 255.255.255.0
9) Set Router to 192.168.0.1
10) Start Windows XP in Parallels. Then connect you Wireless USB. Click on the USB icon on bottom right of Parallels window. Enable USB.
11) Windows will detect new hardware. Follow normal driver installation as usual. Connect to your Access Point as usual.
12) Go to Control Panel > Network Connections, view properties of your Wireless Network Connection. Click on Advanced and check 'Allow other network users to connect through this computer's Internet Connection'. Click OK on whatever popup.
13) At this point just fire up Safari and start browsing.
The same concept applies to other OS. I'd suggest any Live CD Linux or run Windows with a lot of useless services disable to speedup performance.
Cheers!
Requirements:
1) Working Wireless USB
2) Parallels
3) Windows XP (of course other OS could work, but I'll cover XP for this tutorial)
Lets get to work
1) Download and install Parallels
2) Install Windows XP in Parallels.
3) Before or After installation, change Parallels networking type to Host-Only
4) Go to Parallels Desktop > Preferences > Network and uncheck 'Enable DHCP scope for host-only networking'
5) Go to OSX System preferences > Network. Show 'Built-in Ethernet'.
6) Change Configure IPv4 to Manually
7) Set IP Address to 192.168.0.5 (or anything within 192.168.0.2 to 192.168.0.254)
8) Set Subnet Mask to 255.255.255.0
9) Set Router to 192.168.0.1
10) Start Windows XP in Parallels. Then connect you Wireless USB. Click on the USB icon on bottom right of Parallels window. Enable USB.
11) Windows will detect new hardware. Follow normal driver installation as usual. Connect to your Access Point as usual.
12) Go to Control Panel > Network Connections, view properties of your Wireless Network Connection. Click on Advanced and check 'Allow other network users to connect through this computer's Internet Connection'. Click OK on whatever popup.
13) At this point just fire up Safari and start browsing.
The same concept applies to other OS. I'd suggest any Live CD Linux or run Windows with a lot of useless services disable to speedup performance.
Cheers!
- Katılım
- 24 Mayıs 2014
- Mesajlar
- 7.877
- Makaleler
- 60
- Çözümler
- 3
Daha fazla
- Cinsiyet
- Erkek
