Çözüldü STOP 0x00000050 Mavi Ekran hatası

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
Durum
Mesaj gönderimine kapalı.

Abdullah Çelik

Hectopat
Katılım
25 Kasım 2012
Mesajlar
74
Çözümler
1
Daha fazla  
Meslek
Öğrenci
2 ay önce başladı yaklaşık 6 kere format attım, bütün işletim sistemlerinde aynı hata. Linux dahil. 2+2 4 GB RAM var. Oyun oynarken ya da film izlerken oluyor. Zaten hata dxgm.msi dosyasından kaynaklanıyor.




Bu arada şuan Windows 8'deyim ve hala devam ediyor :S
 
Çözüm
Dediğim gibi sorun RAM'lerde olabilir. Siz diyorsunuz "sistemsel diyorlar". RAM'ler de bu sistemin bir parçası.

DDR2 RAM ile DDR3 RAM'i aynı anda takmışsınız. Hayatınızda hiç böyle bir sistem düzeni gördünüz mü? 2+2+1+1.. Sayısal loto gibi olmuş :) Size bu "sistemsel" öğütünü verenler belleklerin Kit olması gerektiğinden bahsetmedi mi? PC tamircisi söylemedi mi size böyle bir konfigürasyonun yanlış olacağını?

Size şunu diyeyim, bu donanımsal bir hatadır. TomsHardware forumda aynı sorunu yaşayan bir kullanıcı anakartının RAM slotlarının bozuk olduğunu öğrenmiş. Sizin da ya RAM'leriniz ya da RAM slotunuz bozuk. Ya da bilgisayarınızdaki başka bir parça bozuk. Anakartınızı garantiye gönderin. Çözüm budur.
Format atmak mavi ekran hatasını çözmez. Mavi ekran, donanımsal bir hatadır. Linux kurunca zaten olayı anlamışsınızdır diye umuyorum. Yani mavi ekran bir Windows sorunu değildir. Bunu öğrenmişsiniz en azından :)

C:\Windows\Minidump klasörünün içeriğini RAR'layıp, MediaFire'a upload edip bizimle paylaşır mısınız.
 
Hataları inceledim. Hepsinde farklı bir hata kodu var. Kesin şundandır diyemeyiz. RAM'ler yerine oturmamış veya RAM'leriniz bozuk olabilir diye tahmin ediyorum. Buradaki programı belleğe atıp bellekleri tarayın:

Memtest86+ USB'den Çalışan RAM Bellek Test Programı

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: fileinfo.sys


NTFS_FILE_SYSTEM


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x00000024 (0x000000b50019060b, 0xfffff8800755d298, 0xfffff8800755cad0, 
0xfffff880016de7f5)


*** fileinfo.sys - Address 0xfffff880016de7f5 base at 0xfffff880014e5000 DateStamp 
0x5010ab32

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


PAGE_FAULT_IN_NONPAGED_AREA


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x00000050 (0xfffff87fc9cbf960, 0x0000000000000000, 0xfffff880037a4c03, 
0x0000000000000002)


*** ntoskrnl.exe - Address 0xfffff8006748e040 base at 0xfffff80067413000 DateStamp 
0x5010ac4b

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


KMODE_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff803ec937012, 0x0000000000000000, 
0xffffffffffffffff)


*** ntoskrnl.exe - Address 0xfffff803ec8f0040 base at 0xfffff803ec875000 DateStamp 
0x5010ac4b


Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: raspptp.sys


KMODE_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8800140ba98, 0xfffff88008012b98, 
0xfffff880080123d0)


*** raspptp.sys - Address 0xfffff880080123d0 base at 0xfffff88003c1e000 DateStamp 
0x5010aa11
 
Hocam dediğinizi daha önce de denedim. Dediğim gibi 2 aydır var bu sorun. PC tamircisi yapamadı :( Yukarda da gördüğünüz gibi NTFS.sys gibi hatalar var. Sistemsel olma ihtimali hiç mi yok? Çünkü bende normalde 2+2+1+1 toplam 6 GB RAM vardı. 2 GB'lar DDR3, 1'likler DDR2 idi. DDR2'leri şuan kaldırdım. Başka bi öneriniz var mıydı?

Sözlerimi yanlış anlamayın lütfen hataların çoğunluğunu internetten araştırdım ve çoğunluğu sistemsel diye yazıyor yabancı forumlar dahil sistemsel diye yazmışlar ama işte onları dinlediğim halde elimde birşey yok. Sizin koyduğunuz teze bakarsak hatalar başladığı zaman memtest denedim, bir hata bulmadı :/
 
Son düzenleyen: Moderatör:
Dediğim gibi sorun RAM'lerde olabilir. Siz diyorsunuz "sistemsel diyorlar". RAM'ler de bu sistemin bir parçası.

DDR2 RAM ile DDR3 RAM'i aynı anda takmışsınız. Hayatınızda hiç böyle bir sistem düzeni gördünüz mü? 2+2+1+1.. Sayısal loto gibi olmuş :) Size bu "sistemsel" öğütünü verenler belleklerin Kit olması gerektiğinden bahsetmedi mi? PC tamircisi söylemedi mi size böyle bir konfigürasyonun yanlış olacağını?

Size şunu diyeyim, bu donanımsal bir hatadır. TomsHardware forumda aynı sorunu yaşayan bir kullanıcı anakartının RAM slotlarının bozuk olduğunu öğrenmiş. Sizin da ya RAM'leriniz ya da RAM slotunuz bozuk. Ya da bilgisayarınızdaki başka bir parça bozuk. Anakartınızı garantiye gönderin. Çözüm budur.
 
Çözüm
Sorun çözüldü. DDR2'leri çıkardım, bellek performansı hem arttı, ayrıyetten RAM'lerin voltajı yavaş yavaşş düşürdüm, son 2 saattir film izliyorum ve blue screen gelmedi. Teşekkürler.
 
Abdullah Bey Technopat'a hoşgeldiniz. Burası başka sitelere benzemez. O dolaştığınız sitelere hiç benzemez. Gördüğünüz gibi daha ilk mesajda analizimizi yaptık ve sorunun kaynağını bulduk. DDR2 ile DDR3 aynı anda olmaz... Sorun tekrar cereyan ederse BIOS'u güncelleyin. Ayrıca farklı bellek modüllerini bir arada kullanmayın!
 
Durum
Mesaj gönderimine kapalı.

Yeni konular

Yeni mesajlar

Geri
Yukarı