Çözüldü i9 11900K sistemde CLOCK_WATCHDOG_TIMEOUT hatası

  • Konuyu başlatan KroX
  • Başlangıç Tarihi
  • Mesaj 4
  • Görüntüleme 455
Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
İşletim sistemi
Windows 11
Çözüm
Öncelikle Technopat Sosyal'e hoş geldiniz. İyi zaman geçirmenizi dileriz. :)

Sorununuza gelecek olursak adım adım ilerleyelim.

1) BIOS sürümünüzü güncelleyin. Şu anki sürümünüz 0232 olarak görünüyor ve aşağıdaki linke de bakacak olursanız bu ilk BIOS sürümü. Sizden ricam bunu en güncel sürüme yükseltmeniz.


2) BIOS'unuzu güncelledikten sonra da ses sürücünüzü güncellemelisiniz. Bunun için direkt olarak aşağıdaki linkte bulunan sürücüyü indirip kurulumu gerçekleştirebilirsiniz. Kurulum gerçekleşmezse DDU ile ses sürücünüzü kaldırıp bu indirmiş olduğunuz sürücüyü kurabileceğinizi unutmayın.


Şimdilik benden bu kadar, sizden ricam bu dediklerimi uygulayıp 3 gün içinde olumlu ya da olumsuz geri dönütte bulunmanız. Şimdiden kolay gelsin. :)

Not: Dumplara göre sistemdeki RAM'leriniz 2133MHz olarak çalışmakta. Sistemden daha iyi verim almak adına BIOS üzerinden XMP'yi ya da DOCP'yi aktifleştirebilirsiniz.

[CODE title="Dökümler"]*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffff92857e623028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000be000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000800400, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 7530

Key : Analysis.DebugAnalysisManager
Value: Create

Key : Analysis.Elapsed.mSec
Value: 39128

Key : Analysis.Init.CPU.mSec
Value: 2155

Key : Analysis.Init.Elapsed.mSec
Value: 72730

Key : Analysis.Memory.CommitPeak.Mb
Value: 86

Key : WER.OS.Branch
Value: co_release

Key : WER.OS.Timestamp
Value: 2021-06-04T16:28:00Z

Key : WER.OS.Version
Value: 10.0.22000.1


FILE_IN_CAB: 011522-10453-01.dmp

BUGCHECK_CODE: 124

BUGCHECK_P1: 0

BUGCHECK_P2: ffff92857e623028

BUGCHECK_P3: be000000

BUGCHECK_P4: 800400

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: System

STACK_TEXT:
ffffda01`cdfba918 fffff802`1a30147b : 00000000`00000124 00000000`00000000 ffff9285`7e623028 00000000`be000000 : nt!KeBugCheckEx
ffffda01`cdfba920 fffff802`167210c0 : 00000000`00000000 ffffda01`cdfba9f9 ffff9285`7e623028 ffff9285`7e623028 : nt!HalBugCheckSystem+0xeb
ffffda01`cdfba960 fffff802`1a43f573 : 00000000`00000000 ffffda01`cdfba9f9 ffff9285`7e623028 ffff9285`7d0b1300 : PSHED!PshedBugCheckSystem+0x10
ffffda01`cdfba990 fffff802`1a302e6d : ffff9285`83130ad0 ffff9285`83130ad0 ffff9285`7d0b1350 bfebfbff`7ffafbff : nt!WheaReportHwError+0x393
ffffda01`cdfbaa60 fffff802`1a3032b8 : 00000000`00000001 ffff9285`00000003 fffff907`b0429000 00000000`00000001 : nt!HalpMcaReportError+0xb1
ffffda01`cdfbabc0 fffff802`1a30314c : ffff9285`7c93ff30 00000000`00000001 00000000`00000000 00000000`0000000c : nt!HalpMceHandlerCore+0x138
ffffda01`cdfbac20 fffff802`1a3033f1 : 00000000`00000010 00000000`00000001 00000000`00000000 00000000`00000000 : nt!HalpMceHandler+0xe0
ffffda01`cdfbac60 fffff802`1a3025b6 : 00000000`00000000 00000000`00000000 ffffda01`cdfbaef0 00000000`00000000 : nt!HalpMceHandlerWithRendezvous+0xc9
ffffda01`cdfbac90 fffff802`1a304f6b : ffff9285`7c93ff30 00000000`00000000 00000000`00000000 00000000`00000000 : nt!HalpHandleMachineCheck+0x62
ffffda01`cdfbacc0 fffff802`1a365409 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!HalHandleMcheck+0x3b
ffffda01`cdfbacf0 fffff802`1a2256fe : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiHandleMcheck+0x9
ffffda01`cdfbad20 fffff802`1a225328 : 00000000`00000010 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7e
ffffda01`cdfbae60 fffff802`31fa153f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x2a8
fffff907`b042ee58 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : intelppm!MWaitIdle+0x1f


MODULE_NAME: GenuineIntel

IMAGE_NAME: GenuineIntel.sys

STACK_COMMAND: .cxr; .ecxr ; kb

FAILURE_BUCKET_ID: 0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OS_VERSION: 10.0.22000.1

BUILDLAB_STR: co_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup: MachineOwner
---------

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 000000000000000c, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: ffffa2815d388180, The PRCB address of the hung processor.
Arg4: 000000000000000b, The index of the hung processor.

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for win32k.sys

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 5936

Key : Analysis.DebugAnalysisManager
Value: Create

Key : Analysis.Elapsed.mSec
Value: 38758

Key : Analysis.Init.CPU.mSec
Value: 2296

Key : Analysis.Init.Elapsed.mSec
Value: 68505

Key : Analysis.Memory.CommitPeak.Mb
Value: 78

Key : WER.OS.Branch
Value: co_release

Key : WER.OS.Timestamp
Value: 2021-06-04T16:28:00Z

Key : WER.OS.Version
Value: 10.0.22000.1


FILE_IN_CAB: 011522-10187-01.dmp

BUGCHECK_CODE: 101

BUGCHECK_P1: c

BUGCHECK_P2: 0

BUGCHECK_P3: ffffa2815d388180

BUGCHECK_P4: b

FAULTING_PROCESSOR: b

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: NVIDIA GeForce Experience.exe

STACK_TEXT:
ffffa281`5cbf59e8 fffff801`3d2abc9a : 00000000`00000101 00000000`0000000c 00000000`00000000 ffffa281`5d388180 : nt!KeBugCheckEx
ffffa281`5cbf59f0 fffff801`3d0db121 : 00000000`00000000 ffffa281`5cbda180 ffff8420`75935180 fffff801`3d03d1f0 : nt!KeAccumulateTicks+0x1d099a
ffffa281`5cbf5a60 fffff801`3d0d8156 : 00000000`00090f38 00000000`0005665c 00000015`9972ee70 00000000`00000000 : nt!KiUpdateRunTime+0x61
ffffa281`5cbf5ac0 fffff801`3d0d9462 : ffffb401`59911820 00000000`00000000 fffff801`3da2b5b8 00000000`00000000 : nt!KiUpdateTime+0x686
ffffa281`5cbf5eb0 fffff801`3d0d6d92 : ffffb401`59911820 ffffe70d`42b242b0 ffffe70d`00000000 00000000`0000000c : nt!KeClockInterruptNotify+0x272
ffffa281`5cbf5f40 fffff801`3d08d6a0 : 00000015`99904a5b ffffe70d`42b24200 00000000`00000001 00000000`00000000 : nt!HalpTimerClockInterrupt+0xe2
ffffa281`5cbf5f70 fffff801`3d21770a : ffffb401`599118a0 ffffe70d`42b24200 00000000`00000000 00000000`00000003 : nt!KiCallInterruptServiceRoutine+0xa0
ffffa281`5cbf5fb0 fffff801`3d217cd7 : ffffb401`59911a10 00000000`00000000 00000000`00118e0d fffff801`3d217d5f : nt!KiInterruptSubDispatchNoLockNoEtw+0xfa
ffffb401`59911820 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatchNoLockNoEtw+0x37


SYMBOL_NAME: nt!KeAccumulateTicks+1d099a

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

IMAGE_VERSION: 10.0.22000.434

STACK_COMMAND: .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET: 1d099a

FAILURE_BUCKET_ID: CLOCK_WATCHDOG_TIMEOUT_INVALID_CONTEXT_nt!KeAccumulateTicks

OS_VERSION: 10.0.22000.1

BUILDLAB_STR: co_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {95498f51-33a9-903b-59e5-d236937d8ecf}

Followup: MachineOwner
---------[/CODE]
Öncelikle Technopat Sosyal'e hoş geldiniz. İyi zaman geçirmenizi dileriz. :)

Sorununuza gelecek olursak adım adım ilerleyelim.

1) BIOS sürümünüzü güncelleyin. Şu anki sürümünüz 0232 olarak görünüyor ve aşağıdaki linke de bakacak olursanız bu ilk BIOS sürümü. Sizden ricam bunu en güncel sürüme yükseltmeniz.


2) BIOS'unuzu güncelledikten sonra da ses sürücünüzü güncellemelisiniz. Bunun için direkt olarak aşağıdaki linkte bulunan sürücüyü indirip kurulumu gerçekleştirebilirsiniz. Kurulum gerçekleşmezse DDU ile ses sürücünüzü kaldırıp bu indirmiş olduğunuz sürücüyü kurabileceğinizi unutmayın.


Şimdilik benden bu kadar, sizden ricam bu dediklerimi uygulayıp 3 gün içinde olumlu ya da olumsuz geri dönütte bulunmanız. Şimdiden kolay gelsin. :)

Not: Dumplara göre sistemdeki RAM'leriniz 2133MHz olarak çalışmakta. Sistemden daha iyi verim almak adına BIOS üzerinden XMP'yi ya da DOCP'yi aktifleştirebilirsiniz.

[CODE title="Dökümler"]*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffff92857e623028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000be000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000800400, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 7530

Key : Analysis.DebugAnalysisManager
Value: Create

Key : Analysis.Elapsed.mSec
Value: 39128

Key : Analysis.Init.CPU.mSec
Value: 2155

Key : Analysis.Init.Elapsed.mSec
Value: 72730

Key : Analysis.Memory.CommitPeak.Mb
Value: 86

Key : WER.OS.Branch
Value: co_release

Key : WER.OS.Timestamp
Value: 2021-06-04T16:28:00Z

Key : WER.OS.Version
Value: 10.0.22000.1


FILE_IN_CAB: 011522-10453-01.dmp

BUGCHECK_CODE: 124

BUGCHECK_P1: 0

BUGCHECK_P2: ffff92857e623028

BUGCHECK_P3: be000000

BUGCHECK_P4: 800400

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: System

STACK_TEXT:
ffffda01`cdfba918 fffff802`1a30147b : 00000000`00000124 00000000`00000000 ffff9285`7e623028 00000000`be000000 : nt!KeBugCheckEx
ffffda01`cdfba920 fffff802`167210c0 : 00000000`00000000 ffffda01`cdfba9f9 ffff9285`7e623028 ffff9285`7e623028 : nt!HalBugCheckSystem+0xeb
ffffda01`cdfba960 fffff802`1a43f573 : 00000000`00000000 ffffda01`cdfba9f9 ffff9285`7e623028 ffff9285`7d0b1300 : PSHED!PshedBugCheckSystem+0x10
ffffda01`cdfba990 fffff802`1a302e6d : ffff9285`83130ad0 ffff9285`83130ad0 ffff9285`7d0b1350 bfebfbff`7ffafbff : nt!WheaReportHwError+0x393
ffffda01`cdfbaa60 fffff802`1a3032b8 : 00000000`00000001 ffff9285`00000003 fffff907`b0429000 00000000`00000001 : nt!HalpMcaReportError+0xb1
ffffda01`cdfbabc0 fffff802`1a30314c : ffff9285`7c93ff30 00000000`00000001 00000000`00000000 00000000`0000000c : nt!HalpMceHandlerCore+0x138
ffffda01`cdfbac20 fffff802`1a3033f1 : 00000000`00000010 00000000`00000001 00000000`00000000 00000000`00000000 : nt!HalpMceHandler+0xe0
ffffda01`cdfbac60 fffff802`1a3025b6 : 00000000`00000000 00000000`00000000 ffffda01`cdfbaef0 00000000`00000000 : nt!HalpMceHandlerWithRendezvous+0xc9
ffffda01`cdfbac90 fffff802`1a304f6b : ffff9285`7c93ff30 00000000`00000000 00000000`00000000 00000000`00000000 : nt!HalpHandleMachineCheck+0x62
ffffda01`cdfbacc0 fffff802`1a365409 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!HalHandleMcheck+0x3b
ffffda01`cdfbacf0 fffff802`1a2256fe : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiHandleMcheck+0x9
ffffda01`cdfbad20 fffff802`1a225328 : 00000000`00000010 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7e
ffffda01`cdfbae60 fffff802`31fa153f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x2a8
fffff907`b042ee58 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : intelppm!MWaitIdle+0x1f


MODULE_NAME: GenuineIntel

IMAGE_NAME: GenuineIntel.sys

STACK_COMMAND: .cxr; .ecxr ; kb

FAILURE_BUCKET_ID: 0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OS_VERSION: 10.0.22000.1

BUILDLAB_STR: co_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup: MachineOwner
---------

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 000000000000000c, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: ffffa2815d388180, The PRCB address of the hung processor.
Arg4: 000000000000000b, The index of the hung processor.

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for win32k.sys

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 5936

Key : Analysis.DebugAnalysisManager
Value: Create

Key : Analysis.Elapsed.mSec
Value: 38758

Key : Analysis.Init.CPU.mSec
Value: 2296

Key : Analysis.Init.Elapsed.mSec
Value: 68505

Key : Analysis.Memory.CommitPeak.Mb
Value: 78

Key : WER.OS.Branch
Value: co_release

Key : WER.OS.Timestamp
Value: 2021-06-04T16:28:00Z

Key : WER.OS.Version
Value: 10.0.22000.1


FILE_IN_CAB: 011522-10187-01.dmp

BUGCHECK_CODE: 101

BUGCHECK_P1: c

BUGCHECK_P2: 0

BUGCHECK_P3: ffffa2815d388180

BUGCHECK_P4: b

FAULTING_PROCESSOR: b

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: NVIDIA GeForce Experience.exe

STACK_TEXT:
ffffa281`5cbf59e8 fffff801`3d2abc9a : 00000000`00000101 00000000`0000000c 00000000`00000000 ffffa281`5d388180 : nt!KeBugCheckEx
ffffa281`5cbf59f0 fffff801`3d0db121 : 00000000`00000000 ffffa281`5cbda180 ffff8420`75935180 fffff801`3d03d1f0 : nt!KeAccumulateTicks+0x1d099a
ffffa281`5cbf5a60 fffff801`3d0d8156 : 00000000`00090f38 00000000`0005665c 00000015`9972ee70 00000000`00000000 : nt!KiUpdateRunTime+0x61
ffffa281`5cbf5ac0 fffff801`3d0d9462 : ffffb401`59911820 00000000`00000000 fffff801`3da2b5b8 00000000`00000000 : nt!KiUpdateTime+0x686
ffffa281`5cbf5eb0 fffff801`3d0d6d92 : ffffb401`59911820 ffffe70d`42b242b0 ffffe70d`00000000 00000000`0000000c : nt!KeClockInterruptNotify+0x272
ffffa281`5cbf5f40 fffff801`3d08d6a0 : 00000015`99904a5b ffffe70d`42b24200 00000000`00000001 00000000`00000000 : nt!HalpTimerClockInterrupt+0xe2
ffffa281`5cbf5f70 fffff801`3d21770a : ffffb401`599118a0 ffffe70d`42b24200 00000000`00000000 00000000`00000003 : nt!KiCallInterruptServiceRoutine+0xa0
ffffa281`5cbf5fb0 fffff801`3d217cd7 : ffffb401`59911a10 00000000`00000000 00000000`00118e0d fffff801`3d217d5f : nt!KiInterruptSubDispatchNoLockNoEtw+0xfa
ffffb401`59911820 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatchNoLockNoEtw+0x37


SYMBOL_NAME: nt!KeAccumulateTicks+1d099a

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

IMAGE_VERSION: 10.0.22000.434

STACK_COMMAND: .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET: 1d099a

FAILURE_BUCKET_ID: CLOCK_WATCHDOG_TIMEOUT_INVALID_CONTEXT_nt!KeAccumulateTicks

OS_VERSION: 10.0.22000.1

BUILDLAB_STR: co_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {95498f51-33a9-903b-59e5-d236937d8ecf}

Followup: MachineOwner
---------[/CODE]
 
Çözüm
Öncelikle Technopat Sosyal'e hoş geldiniz. İyi zaman geçirmenizi dileriz. :)

Sorununuza gelecek olursak adım adım ilerleyelim.

1) BIOS sürümünüzü güncelleyin. Şu anki sürümünüz 0232 olarak görünüyor ve aşağıdaki linke de bakacak olursanız bu ilk BIOS sürümü. Sizden ricam bunu en güncel sürüme yükseltmeniz.


2) BIOS'unuzu güncelledikten sonra da ses sürücünüzü güncellemelisiniz. Bunun için direkt olarak aşağıdaki linkte bulunan sürücüyü indirip kurulumu gerçekleştirebilirsiniz. Kurulum gerçekleşmezse DDU ile ses sürücünüzü kaldırıp bu indirmiş olduğunuz sürücüyü kurabileceğinizi unutmayın.


Şimdilik benden bu kadar, sizden ricam bu dediklerimi uygulayıp 3 gün içinde olumlu ya da olumsuz geri dönütte bulunmanız. Şimdiden kolay gelsin. :)

Not: Dumplara göre sistemdeki RAM'leriniz 2133MHz olarak çalışmakta. Sistemden daha iyi verim almak adına BIOS üzerinden XMP'yi ya da DOCP'yi aktifleştirebilirsiniz.

[CODE title="Dökümler"]*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error.
source that reported the error. Parameter 2 holds the address of the.
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception.
Arg2: ffff92857e623028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000be000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000800400, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 7530.

Key : Analysis.DebugAnalysisManager
Value: Create.

Key : Analysis.Elapsed.mSec
Value: 39128.

Key : Analysis.Init.CPU.mSec
Value: 2155.

Key : Analysis.Init.Elapsed.mSec
Value: 72730.

Key : Analysis.Memory.CommitPeak.Mb
Value: 86.

Key : WER.OS.Branch
Value: co_release.

Key : WER.OS.Timestamp
Value: 2021-06-04T16:28:00Z

Key : WER.OS.Version
Value: 10.0.22000.1

FILE_IN_CAB: 011522-10453-01.dmp

BUGCHECK_CODE: 124.

BUGCHECK_P1: 0

BUGCHECK_P2: ffff92857e623028.

BUGCHECK_P3: be000000.

BUGCHECK_P4: 800400.

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: System.

STACK_TEXT:
ffffda01`cdfba918 fffff802`1a30147b : 00000000`00000124 00000000`00000000 ffff9285`7e623028 00000000`be000000 : nt!KeBugCheckEx
ffffda01`cdfba920 fffff802`167210c0 : 00000000`00000000 ffffda01`cdfba9f9 ffff9285`7e623028 ffff9285`7e623028 : nt!HalBugCheckSystem+0xeb
ffffda01`cdfba960 fffff802`1a43f573 : 00000000`00000000 ffffda01`cdfba9f9 ffff9285`7e623028 ffff9285`7d0b1300 : PSHED!PshedBugCheckSystem+0x10
ffffda01`cdfba990 fffff802`1a302e6d : ffff9285`83130ad0 ffff9285`83130ad0 ffff9285`7d0b1350 bfebfbff`7ffafbff : nt!WheaReportHwError+0x393
ffffda01`cdfbaa60 fffff802`1a3032b8 : 00000000`00000001 ffff9285`00000003 fffff907`b0429000 00000000`00000001 : nt!HalpMcaReportError+0xb1
ffffda01`cdfbabc0 fffff802`1a30314c : ffff9285`7c93ff30 00000000`00000001 00000000`00000000 00000000`0000000c : nt!HalpMceHandlerCore+0x138
ffffda01`cdfbac20 fffff802`1a3033f1 : 00000000`00000010 00000000`00000001 00000000`00000000 00000000`00000000 : nt!HalpMceHandler+0xe0
ffffda01`cdfbac60 fffff802`1a3025b6 : 00000000`00000000 00000000`00000000 ffffda01`cdfbaef0 00000000`00000000 : nt!HalpMceHandlerWithRendezvous+0xc9
ffffda01`cdfbac90 fffff802`1a304f6b : ffff9285`7c93ff30 00000000`00000000 00000000`00000000 00000000`00000000 : nt!HalpHandleMachineCheck+0x62
ffffda01`cdfbacc0 fffff802`1a365409 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!HalHandleMcheck+0x3b
ffffda01`cdfbacf0 fffff802`1a2256fe : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiHandleMcheck+0x9
ffffda01`cdfbad20 fffff802`1a225328 : 00000000`00000010 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7e
ffffda01`cdfbae60 fffff802`31fa153f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x2a8
fffff907`b042ee58 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : intelppm!MWaitIdle+0x1f

MODULE_NAME: GenuineIntel.

IMAGE_NAME: GenuineIntel.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

FAILURE_BUCKET_ID: 0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OS_VERSION: 10.0.22000.1

BUILDLAB_STR: co_release.

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup: MachineOwner.
---------

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an.
MP system within the allocated interval. This indicates that the specified.
processor is hung and not processing interrupts.
Arguments:
Arg1: 000000000000000c, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: ffffa2815d388180, The PRCB address of the hung processor.
Arg4: 000000000000000b, The index of the hung processor.

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for win32k.sys

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec
Value: 5936.

Key : Analysis.DebugAnalysisManager
Value: Create.

Key : Analysis.Elapsed.mSec
Value: 38758.

Key : Analysis.Init.CPU.mSec
Value: 2296.

Key : Analysis.Init.Elapsed.mSec
Value: 68505.

Key : Analysis.Memory.CommitPeak.Mb
Value: 78.

Key : WER.OS.Branch
Value: co_release.

Key : WER.OS.Timestamp
Value: 2021-06-04T16:28:00Z

Key : WER.OS.Version
Value: 10.0.22000.1

FILE_IN_CAB: 011522-10187-01.dmp

BUGCHECK_CODE: 101.

BUGCHECK_P1: c

BUGCHECK_P2: 0

BUGCHECK_P3: ffffa2815d388180.

BUGCHECK_P4: b

FAULTING_PROCESSOR: b

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXPNP: 1 (!blackboxpnp)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: NVIDIA GeForce Experience.exe

STACK_TEXT:
ffffa281`5cbf59e8 fffff801`3d2abc9a : 00000000`00000101 00000000`0000000c 00000000`00000000 ffffa281`5d388180 : nt!KeBugCheckEx
ffffa281`5cbf59f0 fffff801`3d0db121 : 00000000`00000000 ffffa281`5cbda180 ffff8420`75935180 fffff801`3d03d1f0 : nt!KeAccumulateTicks+0x1d099a
ffffa281`5cbf5a60 fffff801`3d0d8156 : 00000000`00090f38 00000000`0005665c 00000015`9972ee70 00000000`00000000 : nt!KiUpdateRunTime+0x61
ffffa281`5cbf5ac0 fffff801`3d0d9462 : ffffb401`59911820 00000000`00000000 fffff801`3da2b5b8 00000000`00000000 : nt!KiUpdateTime+0x686
ffffa281`5cbf5eb0 fffff801`3d0d6d92 : ffffb401`59911820 ffffe70d`42b242b0 ffffe70d`00000000 00000000`0000000c : nt!KeClockInterruptNotify+0x272
ffffa281`5cbf5f40 fffff801`3d08d6a0 : 00000015`99904a5b ffffe70d`42b24200 00000000`00000001 00000000`00000000 : nt!HalpTimerClockInterrupt+0xe2
ffffa281`5cbf5f70 fffff801`3d21770a : ffffb401`599118a0 ffffe70d`42b24200 00000000`00000000 00000000`00000003 : nt!KiCallInterruptServiceRoutine+0xa0
ffffa281`5cbf5fb0 fffff801`3d217cd7 : ffffb401`59911a10 00000000`00000000 00000000`00118e0d fffff801`3d217d5f : nt!KiInterruptSubDispatchNoLockNoEtw+0xfa
ffffb401`59911820 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatchNoLockNoEtw+0x37

SYMBOL_NAME: nt!KeAccumulateTicks+1d099a

MODULE_NAME: nt.

IMAGE_NAME: ntkrnlmp.exe

IMAGE_VERSION: 10.0.22000.434

STACK_COMMAND: .cxr; .ecxr ; kb.

BUCKET_ID_FUNC_OFFSET: 1d099a.

FAILURE_BUCKET_ID: CLOCK_WATCHDOG_TIMEOUT_INVALID_CONTEXT_nt!KeAccumulateTicks

OS_VERSION: 10.0.22000.1

BUILDLAB_STR: co_release.

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {95498f51-33a9-903b-59e5-d236937d8ecf}

Followup: MachineOwner.
---------[/CODE]

Teşekkürler yardımcı olduğunuz için. Benim RAM'lerim 3600 MHz de çalışıyor görev yöneticisinde de öyle yazıyor. DMP'de öyle yazması farklı bir sıkıntı olduğunu mu gösterir?
 
Teşekkürler yardımcı olduğunuz için. Benim RAM'lerim 3600 MHz de çalışıyor görev yöneticisinde de öyle yazıyor. DMP'de öyle yazması farklı bir sıkıntı olduğunu mu gösterir?

Dump dosyaları düne ait, şu anda öyle bir sorununuzun olmaması normaldir. Dediğim iki maddeyi uygulayıp sonucu bildirirseniz sevinirim.
 

Geri
Yukarı