Installing Optware and SABnzbd+ on the iomega ix2-200 Cloud Edition

Recep Baltaş

Technopat
Yönetici
Katılım
14 Ağustos 2010
Mesajlar
68.689
Çözümler
823
Beğeniler
94.059
Yer
İstanbul
First of all, enable SSH an SFTP: Enable SSH and SFTP on StorCenter ix2-200 Cloud Edition

Now download PuTTY, run it and enter the IP address of the ix2-200 Cloud Edition.

Username: root
Password: soho (+ your admin password if you have one. e.g.: soho1234)



Now you have root, we are going to install ipkg. We will use those codes:

Kod:
export feed=http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable
export ipk_name=`wget -qO- $feed/Packages | awk '/^Filename: ipkg-opt/ {print $2}'`
wget $feed/$ipk_name
tar -xOvzf $ipk_name ./data.tar.gz | tar -C / -xzvf -
mkdir -p /opt/etc/ipkg
echo "src cross $feed" > /opt/etc/ipkg/feeds.conf

You should now already have Optware installed and configured as per the section above. Now we are going to update and install nano:


Kod:
export PATH=/opt/bin:$PATH
 ipkg update
 ipkg install nano

You need to set /opt/bin to permanently be in your PATH environment variable. On this device for the root user you should add the following to the bottom of /root/.profile

Kod:
export PATH=/opt/bin:$PATH

Install Optware:

Kod:
cat > /etc/ipkg.conf
src cross http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstablesrc native http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/native/unstable[press Ctrl + D to save and exit]

Update ipkg:
Kod:
ipkg update

Check which packages are available:
Kod:
ipkg list

Install SABnzbd+
Kod:
ipkg install sabnzbdplus
 

sidtheduck

Kilopat
Katılım
16 Mart 2012
Mesajlar
2
Beğeniler
1
Thanks for this!

Although, I think you have a typo for future viewers.
You said:
Kod:
cat < /etc/ipkg.conf
src cross http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable
src native http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/native/unstable
EOF

and I think it should be:
Kod:
cat > /etc/ipkg.conf
src cross http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable
src native http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/native/unstable
[press Ctrl + D to save and exit]

At least that's what I had to do (cat > to create the conf file).

Also, with the old ix2-200 non-cloud version, there was a way to set up optware auto-start script located in /opt/etc/init.d by modifying the thumbnails portion of /mnt/apps/usr/local/cfg/sohoProcs.xml. I don't see the thumbnails part of the xml included in this cloud version. Is this still needed to auto-start optware scripts?
 



Yeni konular

Yukarı