IRQL_NOT_LESS_OR_EQUAL Mavi Ekran hataları neden olur?

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000000a (0xfffff8041d2940b0, 0x0000000000000002, 0x0000000000000000, 
0xfffff803fd0b3c7c)


*** ntoskrnl.exe - Address 0xfffff803fd086040 base at 0xfffff803fd00b000 DateStamp 
0x5010ac4b

*** STOP: 0x0000000a (0xfffffffffffffff8, 0x0000000000000002, 0x0000000000000000, 
0xfffff801532e08d8)


*** ntoskrnl.exe - Address 0xfffff801532ea040 base at 0xfffff8015326f000 DateStamp 
0x5010ac4b

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: USBXHCI.SYS


DRIVER_IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x000000d1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000008, 
0x0000000000000000)


*** USBXHCI.SYS - Address 0xfffff8800574f02f base at 0xfffff88005736000 DateStamp 
0x5010aaaa

*** STOP: 0x000000d1 (0x0000000006f8d700, 0x0000000000000002, 0x0000000000000000, 
0xfffff88001cebe45)


*** tcpip.sys - Address 0xfffff88001cebe45 base at 0xfffff88001c4f000 DateStamp 
0x5010aad0

*** STOP: 0x000000d1 (0x0000000000000030, 0x0000000000000002, 0x0000000000000000, 
0xfffff8800555fe8f)


*** USBXHCI.SYS - Address 0xfffff8800555fe8f base at 0xfffff88005541000 DateStamp 
0x5010aaaa