Çözüldü Redmi 9 hard brick oldu

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
Kurdum hocam.
Haklısınız hocam işe yaradı.😅
En kritik yerlerden, dikkatlice yapın.

"Enter the libusb folder, run the libusb-win32-devel-filter-1.2.6.0.exe file, click next,next...install, when it's done it would prompt you to launch "filter installer wizard" click finish, when the wizard shows up, select "Install a device filter" it would show you your connected USB devices,
Get your phone and a USB cable, connect the USB cable to your computer,while holding the volume up button on your phone connect your phone to the computer (Based on community feedback you might need to hold both up and down volume buttons AND power button!) once your phone turns on you would see your phone listed as "MediaTek USB Port" at the libusb filter installer before your phone reboots click at the "MediaTek USB Port" and then click install if you don't do it on time, your phone will get disconnected because of rebooting, try again re-plugging your phone. once you click install, You should get a pop-up message saying "...device filter successfully installed for MediaTek USB port..." click ok and exit, then remove your phone from the computer."

Libusb klasörüne girin ve içindeki kurulum sihirbazını çalıştırın. Tamamlandığında "filter installer wizard"ı açacağına dair bilgilendirme vermeli, eğer tik varsa işaretleyin mutlaka.

Açtığınızda "Install a device filter"ı seçin, PC'nize bağlı USB cihazlarını göstermeli.

Telefonunuzun ekranı kapalıyken güç, ses kısma ve ses arttırma tuşlarının üçüne basılı tutarak PC'nize bağlayın, programda "MediaTek USB Port" olarak gözükmeli. Hızlıca seçip kurmalısınız, cihaz açılırsa gidecektir. Eğer hızlıca yapabilirseniz "device filter successfully installed for MediaTek USB Port" yazacaktır. Telefonunuzun PC ile olan bağlantısını kesip programı kapatabilirsiniz.

Son durum nedir?
Daha sürücülerle uğraşıyoruz.
 
En kritik yerlerden, dikkatlice yapın.

"Enter the libusb folder, run the libusb-win32-devel-filter-1.2.6.0.exe file, click next,next...install, when it's done it would prompt you to launch "filter installer wizard" click finish, when the wizard shows up, select "Install a device filter" it would show you your connected USB devices,
Get your phone and a USB cable, connect the USB cable to your computer,while holding the volume up button on your phone connect your phone to the computer (Based on community feedback you might need to hold both up and down volume buttons AND power button!) once your phone turns on you would see your phone listed as "MediaTek USB Port" at the libusb filter installer before your phone reboots click at the "MediaTek USB Port" and then click install if you don't do it on time, your phone will get disconnected because of rebooting, try again re-plugging your phone. once you click install, You should get a pop-up message saying "...device filter successfully installed for MediaTek USB port..." click ok and exit, then remove your phone from the computer."

Libusb klasörüne girin ve içindeki kurulum sihirbazını çalıştırın. Tamamlandığında "filter installer wizard"ı açacağına dair bilgilendirme vermeli, eğer tik varsa işaretleyin mutlaka.

Açtığınızda "Install a device filter"ı seçin, PC'nize bağlı USB cihazlarını göstermeli.

Telefonunuzun ekranı kapalıyken güç, ses kısma ve ses arttırma tuşlarının üçüne basılı tutarak PC'nize bağlayın, programda "MediaTek USB Port" olarak gözükmeli. Hızlıca seçip kurmalısınız, cihaz açılırsa gidecektir. Eğer hızlıca yapabilirseniz "device filter successfully installed for MediaTek USB Port" yazacaktır. Telefonunuzun PC ile olan bağlantısını kesip programı kapatabilirsiniz.


Daha sürücülerle uğraşıyoruz.
Hocam successfully installed yazısını gördüm. Bağlantıyı kestim ve uygulamayı kapattım.
 
Bu Tool'a bakın o zaman, yonganızı destekliyor olmalı.

VirusTotal'de tarayın lütfen.

1687131869287.png
 

Technopat Haberler

Geri
Yukarı