CRITICAL_PROCESS_DIED mavi ekran

Vaestrider

Hectopat
Katılım
31 Ocak 2019
Mesajlar
23
Merhaba Technopat Sosyal yazarları; sizden gelen önerilerden yararlanarak bir bilgisayar toplamıştım 6 ay önce. Bilgisayarı topladığımdan beri sürekli Windows tabanlı mavi ekran hataları aldım, gariptir, bununla ilgili herhangi bir karşı hamle yapmadım. Sebebi de, bu hataların arkada bir oyun açıkken yaşanmıyor olmasıydı. Ancak, bugün itibariyle bilgisayarım açılmamaya başladı ve hep aldığım mavi ekran kodları(System service exception, kernel Security check failure) yerine "critical process died" uyarısını almaya başladım. Az önce format attım ve bu hatalar yeniden başladı diyebilirim. Sizden ricam bu hatalar yeniden bilgisayarımın açılmasını engellemeden bunu çözmemde yardımcı olmanız. (Eğer mümkünse) Bilgisayardan fazla anlayan birisi olmadığım için size şu anda yaşadığım sorunla ilgili fazla bir bilgi sunamıyorum bu yüzden sizden gelen cevaplar doğrultusunda, söylediğiniz işlemleri yapmaya çalışacağım.
 
Son düzenleyen: Moderatör:
Dosya varsa gönder.

Sistemi tüm detaylarına kadar belirt.
 
Dosya varsa gönder.

Sistemi tüm detaylarına kadar belirt.
Sistem:
  • Ekran kartı - ASUS RTX 2060 STRIX
  • İşlemci - Ryzen 5 2600
  • Motherboard - MSI B450M M2v2
  • RAM - G.Skill 8 GB DDR4 3000MHz
  • SSD - Samsung 860 Evo SATA 3.0 250GB
  • HDD - WD 3.5 1TB 64 MB SATA III 7200 RPM
  • Kasa - Cooler Master Masterbox MB511

Minidump:
 
Son düzenleyen: Moderatör:
BIOS güncelle.

Bunu yükle.

Ekran kartı sürücüsünü güvenli mod da DDU ile eski sürücüyü silip yeni ve en güncel olanını yükleyin, dikkat edin internetiniz kapalı olsun siz yeni sürücüyü kurar iken Windows arka da eski tarihten kalma bir sürücüyü yükler ve sizde sürücüyü yükleyince üst üste sürücü kurmuş olursunuz.

HDD için HDtune programı ile Error Scan, Health sonuçları paylaş.
Kod:
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000008, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1


PROCESSES_ANALYSIS: 1

SERVICE_ANALYSIS: 1

STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1


DUMP_CLASS: 1

DUMP_QUALIFIER: 400

BUILD_VERSION_STRING:  18362.1.amd64fre.19h1_release.190318-1202

SYSTEM_MANUFACTURER:  Micro-Star International Co., Ltd.

SYSTEM_PRODUCT_NAME:  MS-7B84

SYSTEM_SKU:  To be filled by O.E.M.

SYSTEM_VERSION:  2.0

BIOS_VENDOR:  American Megatrends Inc.

BIOS_VERSION:  4.00

BIOS_DATE:  12/20/2018

BASEBOARD_MANUFACTURER:  Micro-Star International Co., Ltd.

BASEBOARD_PRODUCT:  B450M PRO-M2 V2 (MS-7B84)

BASEBOARD_VERSION:  2.0

DUMP_TYPE:  2

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: 0

BUGCHECK_P3: 8

BUGCHECK_P4: 0

CPU_COUNT: c

CPU_MHZ: d48

CPU_VENDOR:  AuthenticAMD

CPU_FAMILY: 17

CPU_MODEL: 8

CPU_STEPPING: 2

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT

BUGCHECK_STR:  0x1E

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  0

ANALYSIS_SESSION_HOST:  DESKTOP-18V31A3

ANALYSIS_SESSION_TIME:  02-01-2020 16:12:25.0154

ANALYSIS_VERSION: 10.0.18362.1 x86fre

EXCEPTION_RECORD:  ffffa9d4ea753000 -- (.exr 0xffffa9d4ea753000)
ExceptionAddress: 0000000000000000
   ExceptionCode: c3cec867
  ExceptionFlags: 0a000003
NumberParameters: 0

TRAP_FRAME:  ffff800000000000 -- (.trap 0xffff800000000000)
Unable to read trap frame at ffff8000`00000000

LAST_CONTROL_TRANSFER:  from fffff8012782fda7 to fffff801277c14e0

STACK_TEXT:
ffffb184`4e406508 fffff801`2782fda7 : 00000000`0000001e ffffffff`c0000005 00000000`00000000 00000000`00000008 : nt!KeBugCheckEx
ffffb184`4e406510 fffff801`277d341d : ffffa9d4`ea753000 ffffb184`4e406da0 ffff8000`00000000 00000000`00000000 : nt!KiDispatchException+0x1689d7
ffffb184`4e406bc0 fffff801`277cf605 : ffffe488`0eb23cb3 ffffe488`0de0e010 00000000`00000000 fffff801`2d395120 : nt!KiExceptionDispatch+0x11d
ffffb184`4e406da0 00000000`00000000 : 00000000`00000000 ffffb184`4e577ca0 fffff801`2c92327c 00000000`00000000 : nt!KiPageFault+0x445


THREAD_SHA1_HASH_MOD_FUNC:  2e9ab7e93b3f60731b8608f9c5cc37cdb42d594f

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  ad4e40938d7ce4649a69b0de8cb803599f411381

THREAD_SHA1_HASH_MOD:  d084f7dfa548ce4e51810e4fd5914176ebc66791

FOLLOWUP_IP:
nt!KiDispatchException+1689d7
fffff801`2782fda7 cc              int     3

FAULT_INSTR_CODE:  86f741cc

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!KiDispatchException+1689d7

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4f6eba0

IMAGE_VERSION:  10.0.18362.592

STACK_COMMAND:  .thread ; .cxr ; kb

BUCKET_ID_FUNC_OFFSET:  1689d7

FAILURE_BUCKET_ID:  0x1E_nt!KiDispatchException

BUCKET_ID:  0x1E_nt!KiDispatchException

PRIMARY_PROBLEM_CLASS:  0x1E_nt!KiDispatchException

TARGET_TIME:  2020-02-01T09:48:01.000Z

OSBUILD:  18362

OSSERVICEPACK:  592

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

SUITE_MASK:  272

PRODUCT_TYPE:  1

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

OSEDITION:  Windows 10 WinNt TerminalServer SingleUserTS

OS_LOCALE:

USER_LCID:  0

OSBUILD_TIMESTAMP:  1972-08-22 03:24:00

BUILDDATESTAMP_STR:  190318-1202

BUILDLAB_STR:  19h1_release

BUILDOSVER_STR:  10.0.18362.1.amd64fre.19h1_release.190318-1202

ANALYSIS_SESSION_ELAPSED_TIME:  7d01

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:0x1e_nt!kidispatchexception

FAILURE_ID_HASH:  {4c003660-11e1-3fb7-2474-3522eb7ee67b}

Followup:     MachineOwner
---------
 
BIOS güncelle.

Bunu yükle.

Ekran kartı sürücüsünü güvenli mod da DDU ile eski sürücüyü silip yeni ve en güncel olanını yükleyin, dikkat edin internetiniz kapalı olsun siz yeni sürücüyü kurar iken Windows arka da eski tarihten kalma bir sürücüyü yükler ve sizde sürücüyü yükleyince üst üste sürücü kurmuş olursunuz.

HDD için HDtune programı ile Error Scan, Health sonuçları paylaş.
Kod:
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000008, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1


PROCESSES_ANALYSIS: 1

SERVICE_ANALYSIS: 1

STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1


DUMP_CLASS: 1

DUMP_QUALIFIER: 400

BUILD_VERSION_STRING:  18362.1.amd64fre.19h1_release.190318-1202

SYSTEM_MANUFACTURER:  Micro-Star International Co., Ltd.

SYSTEM_PRODUCT_NAME:  MS-7B84

SYSTEM_SKU:  To be filled by O.E.M.

SYSTEM_VERSION:  2.0

BIOS_VENDOR:  American Megatrends Inc.

BIOS_VERSION:  4.00

BIOS_DATE:  12/20/2018

BASEBOARD_MANUFACTURER:  Micro-Star International Co., Ltd.

BASEBOARD_PRODUCT:  B450M PRO-M2 V2 (MS-7B84)

BASEBOARD_VERSION:  2.0

DUMP_TYPE:  2

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: 0

BUGCHECK_P3: 8

BUGCHECK_P4: 0

CPU_COUNT: c

CPU_MHZ: d48

CPU_VENDOR:  AuthenticAMD

CPU_FAMILY: 17

CPU_MODEL: 8

CPU_STEPPING: 2

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT

BUGCHECK_STR:  0x1E

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  0

ANALYSIS_SESSION_HOST:  DESKTOP-18V31A3

ANALYSIS_SESSION_TIME:  02-01-2020 16:12:25.0154

ANALYSIS_VERSION: 10.0.18362.1 x86fre

EXCEPTION_RECORD:  ffffa9d4ea753000 -- (.exr 0xffffa9d4ea753000)
ExceptionAddress: 0000000000000000
   ExceptionCode: c3cec867
  ExceptionFlags: 0a000003
NumberParameters: 0

TRAP_FRAME:  ffff800000000000 -- (.trap 0xffff800000000000)
Unable to read trap frame at ffff8000`00000000

LAST_CONTROL_TRANSFER:  from fffff8012782fda7 to fffff801277c14e0

STACK_TEXT:
ffffb184`4e406508 fffff801`2782fda7 : 00000000`0000001e ffffffff`c0000005 00000000`00000000 00000000`00000008 : nt!KeBugCheckEx
ffffb184`4e406510 fffff801`277d341d : ffffa9d4`ea753000 ffffb184`4e406da0 ffff8000`00000000 00000000`00000000 : nt!KiDispatchException+0x1689d7
ffffb184`4e406bc0 fffff801`277cf605 : ffffe488`0eb23cb3 ffffe488`0de0e010 00000000`00000000 fffff801`2d395120 : nt!KiExceptionDispatch+0x11d
ffffb184`4e406da0 00000000`00000000 : 00000000`00000000 ffffb184`4e577ca0 fffff801`2c92327c 00000000`00000000 : nt!KiPageFault+0x445


THREAD_SHA1_HASH_MOD_FUNC:  2e9ab7e93b3f60731b8608f9c5cc37cdb42d594f

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  ad4e40938d7ce4649a69b0de8cb803599f411381

THREAD_SHA1_HASH_MOD:  d084f7dfa548ce4e51810e4fd5914176ebc66791

FOLLOWUP_IP:
nt!KiDispatchException+1689d7
fffff801`2782fda7 cc              int     3

FAULT_INSTR_CODE:  86f741cc

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!KiDispatchException+1689d7

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4f6eba0

IMAGE_VERSION:  10.0.18362.592

STACK_COMMAND:  .thread ; .cxr ; kb

BUCKET_ID_FUNC_OFFSET:  1689d7

FAILURE_BUCKET_ID:  0x1E_nt!KiDispatchException

BUCKET_ID:  0x1E_nt!KiDispatchException

PRIMARY_PROBLEM_CLASS:  0x1E_nt!KiDispatchException

TARGET_TIME:  2020-02-01T09:48:01.000Z

OSBUILD:  18362

OSSERVICEPACK:  592

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

SUITE_MASK:  272

PRODUCT_TYPE:  1

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

OSEDITION:  Windows 10 WinNt TerminalServer SingleUserTS

OS_LOCALE:

USER_LCID:  0

OSBUILD_TIMESTAMP:  1972-08-22 03:24:00

BUILDDATESTAMP_STR:  190318-1202

BUILDLAB_STR:  19h1_release

BUILDOSVER_STR:  10.0.18362.1.amd64fre.19h1_release.190318-1202

ANALYSIS_SESSION_ELAPSED_TIME:  7d01

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:0x1e_nt!kidispatchexception

FAILURE_ID_HASH:  {4c003660-11e1-3fb7-2474-3522eb7ee67b}

Followup:     MachineOwner
---------
Dediklerinizin HD Tune kısmı hariç hepsini yaptım. Yaklaşık 40 dakikadır HDD'yi tarıyor daha yarısına gelebildi.
 
HDD sağlıklı, sen diğer dediklerimi yaptıysan büyük şu anlık bilgisayarı test et tekrar hata alırsan dosyası ile paylaş.
Tamamdır. Yardım için çok teşekkürler 😊
HDD sağlıklı, sen diğer dediklerimi yaptıysan büyük şu anlık bilgisayarı test et tekrar hata alırsan dosyası ile paylaş.
O tarihten beri hiç mavi ekran almamıştım, bir iki gündür almaya başladım. Minidump dosyası ekte yardım ederseniz çok mutlu olurum.
 
Son düzenleme:
Uyarı! Bu konu 5 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Geri
Yukarı