Çözüldü Mavi ekran, kapanıp açılma ve oyunda bozuk görüntü

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
Durum
Mesaj gönderimine kapalı.

Hamdi İNAN

Centipat
Katılım
18 Ağustos 2019
Mesajlar
31
Çözümler
1
Daha fazla  
Cinsiyet
Erkek
Selamlar. Yakın zamanda topladığım sistemimde bazı sorunlar yaşıyorum. Örnek vermek gerekirse, mavi ekran, oyun oynarken kendi kendine resetlenmesi, oyuna girdiğimde ekranın mozaiklenmesi gibi sorunlar var.

  • ASUS Prime B450 PLUS anakart
  • R5 1600 AF CPU
  • 2x8 GB g-skill 3000 MHz RAM
  • Samsung 860 Evo M.2 500GB SSD
  • Xigmatek NRP-VC603 PSU

Sistem bileşenleri bu şekilde. İşlemcinin kendi fanını kullanıyorum zaten halihazırda soğuk bir ortamda kullandığım için sıcaklaık 60 dereceyi görmüyor bile. Sistem boştayken sıcaklık değerleri resimlerdeki gibi. Benchmark test sonuçları da şu şekilde.

UserBenchmarks: Game 53%, Desk 74%, Work 61%
CPU: AMD Ryzen 5 1600 Six-Core - 76.3%
GPU: AMD RX 570 - 52%
SSD: Samsung 860 EVO M.2 500GB - 114.1%
RAM: G.SKILL F4 DDR4 3000 C16 2x8GB - 98.6%
Mbd: Asus PRIME B450-PLUS

GPU değeri bir önceki testte %49 civarı çıkmıştı. Ekran kartını servise gönderme niyetindeyim iade değişim hakkım doğarsa başka bir kart almayı düşünüyorum. Bir de şu dosyayı inceleme imkanımız var mı neden mavi ekran verdiğini öğrenmek adına?

Yardımlarınız için şimdiden teşekkürler.



 
Son düzenleyen: Moderatör:
Çözüm
Niyetim konuyu hortlatmak değil hata yaptıysam affola.

Sadece aynı sıkıntıyı yaşayıp yolu buraya düşen olursa yardımı olsun diye yazmak istedim. Bu başlığı açtığım zamandan bu yana geçen süreçte tavsiyelere uyup Windows 10'a geçiş yaptım hatta Adrenalin uygulamasından şüphelenip onu bile kaldırıp denedim ama sorun çözülmedi, daha sonra elimdeki 600W değerindeki PSU'yu SilverStone marka 600W 80+ bir PSU ile değiştirdiğimde sorun ortadan kalktı. En son oyundayken ekran kararıp tekrar açılma sorunu kaldı ki bunuda 40 liralık bir DP kablosu ile çözebildim.
Sistem o kadar eski değil Windows 10'a geç.
Kod:
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for atikmdag.sys
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
GetUlongPtrFromAddress: unable to read from fffff800032a7300

KEY_VALUES_STRING: 1


PROCESSES_ANALYSIS: 1

SERVICE_ANALYSIS: 1

STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1


DUMP_CLASS: 1

DUMP_QUALIFIER: 400

BUILD_VERSION_STRING:  7601.24545.amd64fre.win7sp1_ldr_escrow.200102-1707

SYSTEM_MANUFACTURER:  System manufacturer

SYSTEM_PRODUCT_NAME:  System Product Name

SYSTEM_SKU:  SKU

SYSTEM_VERSION:  System Version

BIOS_VENDOR:  American Megatrends Inc.

BIOS_VERSION:  2008

BIOS_DATE:  12/06/2019

BASEBOARD_MANUFACTURER:  ASUSTeK COMPUTER INC.

BASEBOARD_PRODUCT:  PRIME B450-PLUS

BASEBOARD_VERSION:  Rev X.0x

DUMP_TYPE:  2

BUGCHECK_P1: 0

BUGCHECK_P2: 0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

CPU_COUNT: c

CPU_MHZ: c80

CPU_VENDOR:  AuthenticAMD

CPU_FAMILY: 17

CPU_MODEL: 8

CPU_STEPPING: 2

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x1E

PROCESS_NAME:  System

CURRENT_IRQL:  2

ANALYSIS_SESSION_HOST:  DESKTOP-18V31A3

ANALYSIS_SESSION_TIME:  02-29-2020 13:56:31.0944

ANALYSIS_VERSION: 10.0.18362.1 x86fre

EXCEPTION_RECORD:  fffff880033e2338 -- (.exr 0xfffff880033e2338)
ExceptionAddress: fffff88005008f7d (dxgmms1!VidSchiProcessDpcVSyncCookie+0x00000000000000e9)
   ExceptionCode: c0000094 (Integer divide-by-zero)
  ExceptionFlags: 00000000
NumberParameters: 0

TRAP_FRAME:  fffff880033e23e0 -- (.trap 0xfffff880033e23e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88005008f7d rsp=fffff880033e2570 rbp=fffffa801125c940
 r8=0000000000000000  r9=0000000000000000 r10=fffffa801125b1f0
r11=fffff880033e2628 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
dxgmms1!VidSchiProcessDpcVSyncCookie+0xe9:
fffff880`05008f7d 48f7f1          div     rax,rcx
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff800030a10ee to fffff8000309de70

STACK_TEXT: 
fffff880`033e1428 fffff800`030a10ee : fffff880`033e1a10 fffff880`102dea2e fffff880`033e1ba0 fffff800`03065de0 : nt!KeBugCheck
fffff880`033e1430 fffff800`030a51fd : fffff800`03280388 fffff800`031d3634 fffff800`0300a000 fffff880`033e2338 : nt!KiKernelCalloutExceptionHandler+0xe
fffff880`033e1460 fffff800`03065125 : fffff800`031b3b94 fffff880`033e14d8 fffff880`033e2338 fffff800`0300a000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`033e1490 fffff800`03184eee : fffff880`033e2338 fffff880`033e1ba0 fffff880`00000000 fffffa80`00000004 : nt!RtlDispatchException+0x415
fffff880`033e1b70 fffff800`030ac3c2 : fffff880`033e2338 fffffa80`11257010 fffff880`033e23e0 00000000`00000000 : nt!KiDispatchException+0x17e
fffff880`033e2200 fffff800`030a71e2 : 00000000`00000002 00000000`00000000 fffffa80`1125b000 fffff880`0500e769 : nt!KiExceptionDispatch+0xc2
fffff880`033e23e0 fffff880`05008f7d : fffffa80`11257010 00000000`00000000 fffffa80`1125b000 fffffa80`0cc2c430 : nt!KiDivideErrorFault+0x2e2
fffff880`033e2570 fffff880`05008d24 : fffff880`00000000 fffffa80`00000004 fffffa80`00000000 00000000`00000000 : dxgmms1!VidSchiProcessDpcVSyncCookie+0xe9
fffff880`033e2630 fffff880`05008c88 : 000000f4`10000000 fffffa80`11257010 fffffa80`12b70b40 fffffa80`12b70e28 : dxgmms1!VidSchDdiNotifyDpcWorker+0x80
fffff880`033e2680 fffff880`050ff1cf : fffffa80`0e66a480 00000000`00000000 00000000`00000001 fffffa80`12b70e28 : dxgmms1!VidSchDdiNotifyDpc+0x94
fffff880`033e26d0 fffff880`100fed87 : fffffa80`12b70b40 fffffa80`12b70b40 000000f4`10000000 fffffa80`12b70b40 : dxgkrnl!DxgNotifyDpcCB+0x77
fffff880`033e2700 fffffa80`12b70b40 : fffffa80`12b70b40 000000f4`10000000 fffffa80`12b70b40 00000000`00000000 : atikmdag+0xcad87
fffff880`033e2708 fffffa80`12b70b40 : 000000f4`10000000 fffffa80`12b70b40 00000000`00000000 fffff880`033e2760 : 0xfffffa80`12b70b40
fffff880`033e2710 000000f4`10000000 : fffffa80`12b70b40 00000000`00000000 fffff880`033e2760 00000000`00000000 : 0xfffffa80`12b70b40
fffff880`033e2718 fffffa80`12b70b40 : 00000000`00000000 fffff880`033e2760 00000000`00000000 00000000`00000000 : 0x000000f4`10000000
fffff880`033e2720 00000000`00000000 : fffff880`033e2760 00000000`00000000 00000000`00000000 00000000`00000001 : 0xfffffa80`12b70b40


THREAD_SHA1_HASH_MOD_FUNC:  2df6cf70641b455bff5b51f38841351a51a58ca2

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  83d9e26f91db6b761d2324d7f0e37ae930eb7437

THREAD_SHA1_HASH_MOD:  8e360ce24f604d9f5968fee6e125f1d35ee72d1c

FOLLOWUP_IP:
dxgmms1!VidSchiProcessDpcVSyncCookie+e9
fffff880`05008f7d 48f7f1          div     rax,rcx

FAULT_INSTR_CODE:  48f1f748

SYMBOL_STACK_INDEX:  7

SYMBOL_NAME:  dxgmms1!VidSchiProcessDpcVSyncCookie+e9

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME:  dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  5d5222c1

IMAGE_VERSION:  6.1.7601.24513

STACK_COMMAND:  .thread ; .cxr ; kb

FAILURE_BUCKET_ID:  X64_0x1E_dxgmms1!VidSchiProcessDpcVSyncCookie+e9

BUCKET_ID:  X64_0x1E_dxgmms1!VidSchiProcessDpcVSyncCookie+e9

PRIMARY_PROBLEM_CLASS:  X64_0x1E_dxgmms1!VidSchiProcessDpcVSyncCookie+e9

TARGET_TIME:  2020-02-24T03:14:14.000Z

OSBUILD:  7601

OSSERVICEPACK:  1000

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

SUITE_MASK:  272

PRODUCT_TYPE:  1

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 7

OSEDITION:  Windows 7 WinNt (Service Pack 1) TerminalServer SingleUserTS

OS_LOCALE: 

USER_LCID:  0

OSBUILD_TIMESTAMP:  2020-01-03 05:56:30

BUILDDATESTAMP_STR:  200102-1707

BUILDLAB_STR:  win7sp1_ldr_escrow

BUILDOSVER_STR:  6.1.7601.24545.amd64fre.win7sp1_ldr_escrow.200102-1707

ANALYSIS_SESSION_ELAPSED_TIME:  1190

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0x1e_dxgmms1!vidschiprocessdpcvsynccookie+e9

FAILURE_ID_HASH:  {563df3f2-b5ac-cd6b-d157-580c3b7f02da}

Followup:     MachineOwner
---------
 
Denemekten bir şey kaybetmem Win10 bulup deneyeyim bir de o şekilde.
 
 
Niyetim konuyu hortlatmak değil hata yaptıysam affola.

Sadece aynı sıkıntıyı yaşayıp yolu buraya düşen olursa yardımı olsun diye yazmak istedim. Bu başlığı açtığım zamandan bu yana geçen süreçte tavsiyelere uyup Windows 10'a geçiş yaptım hatta Adrenalin uygulamasından şüphelenip onu bile kaldırıp denedim ama sorun çözülmedi, daha sonra elimdeki 600W değerindeki PSU'yu SilverStone marka 600W 80+ bir PSU ile değiştirdiğimde sorun ortadan kalktı. En son oyundayken ekran kararıp tekrar açılma sorunu kaldı ki bunuda 40 liralık bir DP kablosu ile çözebildim.
 
Çözüm
Durum
Mesaj gönderimine kapalı.
Bu siteyi kullanmak için çerezler gereklidir. Siteyi kullanmaya devam etmek için çerezleri kabul etmelisiniz. Daha Fazlasını Öğren.…