NEC/Renesas USB 3.0 Host Controller Driver v.2.1.19.0

Katılım
12 Haziran 2011
Mesajlar
14.298
Makaleler
3
Çözümler
6
Yer
Nebuchadnezzar
Daha fazla  
Meslek
Judge Dredd
NEC / Renesas USB 3.0 Host Controller Driver v.2.1.19.0



Sürüm: 2.1.19.0Boyut: 7.88 MBEklenme: 2011/07/11Lisans: -
İşletim sistemi: Windows XP / XP 64-bit/Vista/Vista 64-bit/7/7 64-bit



Açıklama:
NEC / Renesas USB 3.0 Host Controller Sürücü v.2.1.19.0.

Ana sayfa: NEC Global

Download: RENESAS-USB3-Host-Driver

Kod:
---------------------------------------------------------------------------
4. History
---------------------------------------------------------------------------
 Version 2.1.19.0 : June 30, 2011
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1458561
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Signature Only - Microsoft Windows XP family, x86
                        Signature Only - Microsoft Windows XP family, x64
                        Logo - Microsoft Windows Vista family, x86 Basic
                        Logo - Microsoft Windows Vista family, x64 Basic
                        Windows 7
                        Windows 7 x64 
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64 


-  The following issues depending on the specific devices were fixed.
 1. Remote Wakeup funtion from Logitec G15 Gaming Keyboard doesn't work.
 
 2. There are specific models of Creative ZEN which aren't detected.




-  The following issues were fixed.
-- Driver
 1. USB3.0 devices aren't detected when users operate the below steps.
    a) Turn on a PC.
    b) Enter sleep(S3 state) without connecting USB3.0 devices.
    c) Connect USB3.0 devices to a USB3.0 port during S3 state.
    d) USB 3.0 HDD isn't detected.
   The USB3.0 devices aren't detected after th PC resumed from S3 state.
   This issue only occurs with Ver.2.1.16.0.


 2. There is a possibility of the bluescreen caused by Hot-Plug operation of
   a USB3.0 Hub connecting USB3.0 devices. This issue only occurs with Ver2.1.16.0.
 
 3. There is a possibility that USB devices can't be detected after remote 
   wakeup. This issue only occurs with Ver.2.1.16.0. We will add information
   about remote wakeup in the USB3.0 Host Controller Drier Application Note
   near future.
   
--CoInstaller
 1. When open "Advanced" tab of Renesas USB 3.0 Host Controller in device
   manager and change the aero theme of "the visuals and sounds on your computer",
   the firmware version and check box of "Disable USB 3.0 power management
   functions" disappear.
 
Uyarı! Bu konu 13 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Yeni konular

Geri
Yukarı