Bilgisayarınız RAM'lerinde bozukluk varsa genelde PAGE_FAULT_IN_NONPAGED_AREA hatası alırsınız. Bunun sonucunda aşağıdaki gibi mavi ekran hataları ortaya çıkar.
RAM:'lerinizi kontrol etmek için:
Memtest86+ USB'den Çalışan RAM Bellek Test Programı | Technopat Sosyal
Eğer siz de bu hatadan alıyorsanız C:\Windows\Minidump klasöründeki dmp dosyalarını bizimle paylaşın, hatanın tam nedenini analiz edelim
RAM:'lerinizi kontrol etmek için:
Memtest86+ USB'den Çalışan RAM Bellek Test Programı | Technopat Sosyal
Eğer siz de bu hatadan alıyorsanız C:\Windows\Minidump klasöründeki dmp dosyalarını bizimle paylaşın, hatanın tam nedenini analiz edelim
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000050 (0xfffffa8015c00000, 0x0000000000000000, 0xfffff8800e3df61e,
0x0000000000000002)
*** ntoskrnl.exe - Address 0xfffff8028fc69440 base at 0xfffff8028fc0f000 DateStamp
0x51a966cd
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
PFN_LIST_CORRUPT
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000004e (0x0000000000000002, 0x00000000001cdafe, 0x000000000022efff,
0x0000000000000001)
*** ntoskrnl.exe - Address 0xfffff8010e26e440 base at 0xfffff8010e214000 DateStamp
0x51a966cd
Son düzenleme:
