Point Blank Mavi Ekran - PAGE_FAULT_IN_NONPAGED_AREA

RAM'ler bozuk. Bu program ile RAM'leri tarar mısın:

https://www.technopat.net/forum/mas...usb-den-calisan-ram-bellek-test-programi.html

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


PAGE_FAULT_IN_NONPAGED_AREA


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x00000050 (0xfffffa8018d37120, 0x0000000000000000, 0xfffff8801eca6799, 
0x0000000000000000)


*** ntoskrnl.exe - Address 0xfffff803c46ca440 base at 0xfffff803c4670000 DateStamp 
0x51a966cd

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: cng.sys


PAGE_FAULT_IN_NONPAGED_AREA


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x00000050 (0xfffffa80165fd120, 0x0000000000000000, 0xfffff8801eb4d799, 
0x0000000000000000)


*** cng.sys - Address 0xfffff8a00bd760d0 base at 0xfffff88000f40000 DateStamp 
0x5076566e

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


PAGE_FAULT_IN_NONPAGED_AREA


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x00000050 (0xfffffa80189d3120, 0x0000000000000000, 0xfffff8801eca6799, 
0x0000000000000000)


*** ntoskrnl.exe - Address 0xfffff80088c79440 base at 0xfffff80088c1f000 DateStamp 
0x51a966cd
 
Recep abi RAM taraması 2 kere yaptırdım hiç bir sıkıntı bulmadı. Dün bilgisayarcı bir arkadaşıma götürdüm orada da baya uğraştık ama sonuç yine hüsran. Aynı hatayı veriyor.
 
Son düzenleyen: Moderatör:
Uyarı! Bu konu 12 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Technopat Haberler

Geri
Yukarı