*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff803686d339b, memory referenced
Arg2: 00000000000000ff, IRQL
Arg3: 0000000000000006, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8036703c650, address which referenced memory
Debugging Details:
------------------
KEY_VALUES_STRING: 1
Key : Analysis.CPU.mSec
Value: 1608
Key : Analysis.Elapsed.mSec
Value: 1761
Key : Analysis.IO.Other.Mb
Value: 0
Key : Analysis.IO.Read.Mb
Value: 0
Key : Analysis.IO.Write.Mb
Value: 0
Key : Analysis.Init.CPU.mSec
Value: 187
Key : Analysis.Init.Elapsed.mSec
Value: 4138
Key : Analysis.Memory.CommitPeak.Mb
Value: 150
Key : Bugcheck.Code.LegacyAPI
Value: 0xa
Key : Failure.Bucket
Value: AV_CODE_AV_nt!KiGeneralProtectionFault
Key : Failure.Hash
Value: {5343d66d-454d-4c18-a7da-e1f9e3148e7c}
Key : WER.OS.Branch
Value: ni_release
Key : WER.OS.Version
Value: 10.0.22621.1
BUGCHECK_CODE: a
BUGCHECK_P1: fffff803686d339b
BUGCHECK_P2: ff
BUGCHECK_P3: 6
BUGCHECK_P4: fffff8036703c650
FILE_IN_CAB: 060723-9015-01.dmp
READ_ADDRESS: fffff8036791c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
fffff803686d339b
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXPNP: 1 (!blackboxpnp)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
TRAP_FRAME: fffff803646d31e0 -- (.trap 0xfffff803646d31e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fbfff8038c06c060 rbx=0000000000000000 rcx=ffff830face173d0
rdx=0000000000000508 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8036703c650 rsp=fffff803646d3370 rbp=fffff803686d33f0
r8=00000000ffffffff r9=fffff803646d3590 r10=0000000000000000
r11=fffff803646d33b0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di ng nz na pe nc
nt!KiGeneralProtectionFault+0x10:
fffff803`6703c650 c645ab01 mov byte ptr [rbp-55h],1 ss:0018:fffff803`686d339b=??
Resetting default scope
STACK_TEXT:
fffff803`646d3098 fffff803`670417a9 : 00000000`0000000a fffff803`686d339b 00000000`000000ff 00000000`00000006 : nt!KeBugCheckEx
fffff803`646d30a0 fffff803`6703ce34 : 00000000`00000000 00000000`00409800 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff803`646d31e0 fffff803`6703c650 : ffff830f`00000000 fffff803`646d3470 00000000`00000004 00000000`00504fac : nt!KiPageFault+0x474
fffff803`646d3370 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiGeneralProtectionFault+0x10
SYMBOL_NAME: nt!KiGeneralProtectionFault+10
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
IMAGE_VERSION: 10.0.22621.1778
STACK_COMMAND: .cxr; .ecxr ; kb
BUCKET_ID_FUNC_OFFSET: 10
FAILURE_BUCKET_ID: AV_CODE_AV_nt!KiGeneralProtectionFault
OS_VERSION: 10.0.22621.1
BUILDLAB_STR: ni_release
OSPLATFORM_TYPE: x64
OSNAME: Windows 10
FAILURE_ID_HASH: {5343d66d-454d-4c18-a7da-e1f9e3148e7c}
Followup: MachineOwner
---------