Razer Synapse ses ayarları çalışmıyor

proflie dedi:

Razer Kraken V3 aldım. Yazılımda ses özellikleri hiçbiri çalışmıyor. Globalde bile herkes çok şikayetçi. Gerçekten berbat bir yazılım.

Genişletmek için tıkla...

K3R1M dedi:

Synapse 4 mü 3 mü? Yeni sürüm cihazı desteklemiyordur belki.

Genişletmek için tıkla...

proflie dedi:

İkisini de defalarca denedim. Razer web sitesinde ikisinin de desteklediğini belirtmiş. Yazılımsal değil sanırım.

Genişletmek için tıkla...

narter485 dedi:

Yazılımsal bir sorun. Bende de çalışmıyor. Forumlarda baktığımda bu sorunu yaşayan birçok kişi var. Ve Dolby ile ses modu değişikliklerini kulaklık algılıyor.

Genişletmek için tıkla...

proflie dedi:

Çözümü yok mu? Yazılımsal evet ama benim cihazda donanımsal arızada var mesela THX Spatial Audio yazılımı açınca sadece tık tık ses veriyor. Cihaz boştayken sinyal sesleri geliyor tüm bozuk cihazlar bana mı denk geliyor anlamadım

Genişletmek için tıkla...

• Right-click on the speaker icon on your system tray and select Open Sound Settings.
• Click Sound Control Panel under Related Settings.
• Right-click on your Razer headset and select Set as Default Device. It is the default device if it has a green check mark on it.

• Right-click on the Speaker icon on the System tray and select Open Sound Settings.
• Click Sound Control Panel under Related settings on the right side of the window.
• Go to Playback tab then right-click on Realtek High Definition Audio and select Properties.
• Go to Levels tab and click Balance
• Adjust the levels so the left and right have the same volume levels.
• The settings we went through should fix your issue. Please test by playing any audio from your computer and let me know how it goes.

• Open Synapse 3 and go to the Audio tab > Mixer.
• Disable THX Spatial Audio by clicking the Slider. Slider is Green is ON, Grey is OFF.

• Open Synapse 3, go to Audio tab > Enhancements.
• Disable ALL enhancements or adjust the levels according to your preference.

• Press Windows key + S on your keyboard to open the Search bar.
• Type in “Device Manager” and hit Enter.
• Expand Audio Inputs and Outputs.
• Right-click on Speakers (Realtek High Definition Audio) and select Uninstall Device.
• Restart Computer, this should re-install back the driver.

narter485 dedi:

Ben bayağı bir mailleştim bir şeyler söylediler yaptım hepsini ama sorun çözülmedi. En son garantiye gönderin dediler. Söyledikleri adımları yazayım denersin kanka. Adımlarda Synapse 3 diyor ama sen 4'e göre yap. Ben 3'ü kurdum 4 çalışmayınca gene olmadıydı o yüzden 3'e göre anlattılar.

1. Make sure that your device is fully charged.

2. Make sure that It is plugged directly to your PC/Laptop/Audio Source's USB port and not on a USB HUB.

3. Make sure that you are using the device within the maximum range.

4. Make sure that no interference/other Wireless dongles/routers near the device or besides its dongle.

5. Clean the affected area by blowing compressed Air'in between the gaps or components to remove dust or Dirt that may have been stuck and may caused the interference.

6. Check volume wheel/In line volume Control if the volume level is set to Max.

7. Set as Default Audio device. Let's make sure that your headset is set as a default playback device. To do this, please do the following:

• Right-Click on the speaker icon on your System tray and select Open Sound Settings.
• Click Sound Control Panel under Related Settings.
• Right-Click on your Razer headset and select Set as Default Device. It is the default device if it has a Green check mark on it.

8. Adjust Audio balance. To do this:
You can adjust the Audio balance levels in Windows by doing the following:

• Right-Click on the Speaker icon on the System tray and select Open Sound Settings.
• Click Sound Control Panel under Related settings on the right side of the window.
• GO to Playback Tab then right-Click on Realtek High Definition Audio and select Properties.
• GO to Levels Tab and Click Balance
• Adjust the levels so the left and right have the same volume levels.
• The settings we went through should fix your issue. Please test by playing any Audio from your Computer and let me know how it goes.

9. Disable THX'in Synapse 3. To disable THX'in Synapse 3, please do the following:

• Open Synapse 3 and GO to the Audio Tab > Mixer.
• Disable THX Spatial Audio by clicking the Slider. Slider is Green is ON, Grey is OFF.

10. Disable Audio Enhancements. The enhancements made by the software may also be the cause of the issue. To Disable Audio Enhancements, please do the following:

• Open Synapse 3, GO to Audio Tab > Enhancements.
• Disable ALL enhancements or adjust the levels according to your preference.

11. Disable Razer Synapse and check if the issue still happens.

12. If the issue is fixed when Synapse is disabled, clean reinstall Synapse.

13. If the issue still persists even after disabling Synapse, Reinstall Audio Driver. You can reinstall the Audio drivers by:

• Press Windows key + S on your keyboard to open the Search bar.
• Type in “Device Manager” and hit Enter.
• Expand Audio Inputs and Outputs.
• Right-Click on Speakers (Realtek High Definition Audio) and select Uninstall Device.
• Restart Computer, this should re-install back the driver.

14. Test the device with a different PC and check if the issue also happens.

Genişletmek için tıkla...