selammertcimiyidir
Femtopat
- Katılım
- 15 Ocak 2021
- Mesajlar
- 6
Daha fazla
- Cinsiyet
- Erkek
Windows tuşu + R yapıp DxDiag yazabilirsiniz.Bilgisayar özellikleri içinWindows tuşu + RyapıpDxDiagyazabilirsiniz.
PSU'yu öğrenmek için kasayı açıp bakabilirsiniz.
CPU-Z indirin ve bütün sekmelerdeki detayları SS atın.
CPU-Z readme file.
------------------
Version 1.94.8.
November 2020.
Contact: cpuz@cpuid.com
Web page: CPU-Z | Softwares | CPUID
Validation page: CPU-Z VALIDATOR
Hall of fame: CPU-Z Validator - World Records
CPUID SDK: CPUID DEVELOPERS CORNER
Configuration file (cpuz. İni)
------------------------------
The Configuration file must be named CPU-Z. İni and be present at the same directory Level.
As cpuz.exe. It contains the following:
[CPU-Z]
Versıon=x. X. X. X.
Textfontname=
Textfontsize=14.
Textfontcolor=000080.
Labelfontname=
Labelfontsize=14.
Acpı=1.
Pcı=1.
Maxpcıbus=256.
Dmı=1.
Sensor=1.
Smbus=1.
Display=1.
Usedisplayapı=1.
Busclock=1.
Chipset=1.
Spd=1.
Xoc=0.
Checkupdates=1.
- Textfontname: Font used for the information boxes.
- Textfontsize: Size of the font used for the information boxes.
- Textfontcolor: Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code: Rrggbb.
- Labelfontname: Font used for the label boxes.
- Labelfontsize: Size of the font used for the label boxes.
- Sensor: Set to off (or 0) disables sensor chip detection and voltages measurement. 1 to enable.
- PCI: Set to off (or 0) disables the PCI information. This disables chipset, spd and, depending on the hardware, sensoring information. 1 to enable.
- Maxpcıbus: Sets the maximum PCI bus to scan. Default Value is 256.
- Dmı: Set to off (or 0) disables the dmı (desktop management ınterface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable.
- Smbus: Set to off (or 0) disables smbus information: Spd, and, depending on the hardware, sensoring information. 1 to enable.
- Display: Set to off (or 0) disables the video Card information reported in the validator. 1 to enable.
- Usedisplayapı: Set to 1, uses the display driver to read the display adapters information.
- Busclock: Set to 1, uses the bus clock as primary clock Source. Set to 0 to use an alternate method.
- Chipset: Set to off (or 0) disables the Memory Controller and southbridge information. 1 to enable.
- Spd: Set to 0 to disable spd reading. 1 to enable.
- Xoc: Extreme overclock mode: Runs CPU-Z with as little System load as possible. Your System won't be fully validated before it is manually checked. Requires to restart CPU-Z.
- Checkupdates: Set to 0 to disable the New version checker at startup. 1 to enable.
Parameters.
----------
-Txt=filename: Launch CPU-Z'in Ghost mode (no interface appears) and generates the register dump file (.txt)
İn the same directory as the exe file.
-Html=filename: Same as "-txt" except it generates the HTML report.
-Core=ıd: Displays clock Speed of Core #ıd (ıd can be set from 0 to number of cores minus one).
-Bench: Runs CPU-Z without interface, runs the benchmark, and saves the result in a txt file named like the machine.
Keys.
----
F5: Save the current Tab'in a bmp file.
F6: Save the current Tab'in the clipboard.
F7: Save cvf file in the current directory.
Cache latency tool.
------------------
The cache latency tool can be downloaded at that address: http://download.cpuid.com/misc/latency.zip
History.
-------
--------------------------------------------------------------------------------------------------
1.94.8 - november 2020.
- Intel tiger lake-u and tiger lake-h (1.94.8).
- Intel Z590 (1.94.8).
- NVIDIA RTX 3070 GPU (1.94.8).
- AMD Ryzen 5000 vermeer preliminary Support.
- Intel rocket Lake preliminary Support.
- GPU TDP.
--------------------------------------------------------------------------------------------------
1.93 - august 2020.
- AMD Ryzen 7 Pro 4750G, Ryzen 5 Pro 4650G, Ryzen 3 Pro 4350G.
- Intel tiger Lake platform.
--------------------------------------------------------------------------------------------------
1.92.2 - june 2020.
- AMD Ryzen 9 3900XT, Ryzen 7 3800XT and Ryzen 5 3600XT (1.92.2).
- AMD B550 chipset (1.92.2).
- Hygon processors preliminary Support (1.92.2).
- Intel Z490/W480/B460 comet Lake platform Support.
- AMD "renoir" Ryzen APU.
- AMD Ryzen 3 3100 & 3300X.
- Windows 10 on ARM Processor preliminary Support.
--------------------------------------------------------------------------------------------------
1.91 - december 2019.
- AMD Ryzen Threadripper 3960X, 3970X and 3990X.
- Intel Core 10xxx comet Lake processors.
- Centaur haul cha w/ AI hardware preliminary Support.
--------------------------------------------------------------------------------------------------
1.90 - august 2019.
- AMD Ryzen 3000 Pro (1.90. 1).
- Intel comet Lake preliminary Support (1.90. 1).
- AMD Ryzen Threadripper 3000 preliminary Support.
- Intel ıce-lake preliminary Support.
- NVIDIA RTX 2070 and 2080 Super.
--------------------------------------------------------------------------------------------------
1.89 - june 2019.
- Preliminary Support of AMD Ryzen 3000 (1.89. 1)
- Intel cascade Lake processors (1.89. 1)
- Zhaoxin ZX-5000 and ZX-6000 processors families Support.
- AMD APU Ryzen picasso detection fix.
--------------------------------------------------------------------------------------------------
1.88 - march 2019.
- Intel 9400F, 9600KF, 9700KF and 9900KF and 9th gen R0 stepping.
- AMD APU Ryzen picasso preliminary Support.
- DDR4 SDRAM chips manufacturer.
- AMD Radeon VII (vega 20).
- NVIDIA GTX 1660 and 1660 Ti.
--------------------------------------------------------------------------------------------------
1.87 - november 2018.
- Intel basin falls skylake-x Refresh.
- NVIDIA GeForce RTX serie 20.
- New avx2 and avX512 benchmarks (beta versions).
--------------------------------------------------------------------------------------------------
1.86 - august 2018.
- Intel 9th generation Core family (coffee Lake 9900K, 9700K, 9600K, 9600, 9500 and 9400).
- Intel coffee lake-u processors.
--------------------------------------------------------------------------------------------------
1.85 - may 2018.
- AMD agesa version report in BIOS information.
- Increased clocks Refresh Rate.
- Fix initialization error on Windows XP and 7.
--------------------------------------------------------------------------------------------------
1.84 - march 2018.
- Intel New Coffee Lake desktop and Mobile processors.
- New timers tool.
- New "-bench" parameter.
--------------------------------------------------------------------------------------------------
1.83 - january 2018.
- AMD desktop Raven Ridge APU (AM4).
- Windows 10 Build 16299.
--------------------------------------------------------------------------------------------------
1.82 - december 2017.
- AMD Raven Ridge processors Support (1.82.1)
- Intel Xeon phi Knight landing preliminary Support.
- Fix BCLK fluctuations on skl-x.
- The benchmark does Now Support systems with more than 64 cpus.
--------------------------------------------------------------------------------------------------
1.81.1 - octövber 2017.
- Intel Coffee Lake processors and Z370 platform.
- Intel skylake-x hcc processors.
- Intel Xeon skylake-sp and Xeon W Skylake processors.
--------------------------------------------------------------------------------------------------
1.80. 2 - september 2017.
- Intel Core X processors (kbl-x and skl-x).
- Preferred Core(s) display in clocks diyalog.
- Fix 32-bit version issue with Windows 10 builds 16273 and 16275 (1.80. 2)
--------------------------------------------------------------------------------------------------
1.79. 1 - may 2017.
- Intel X299 (1.79. 1).
- AMD Threadripper (1.79. 1).
- AMD Ryzen 5 and Ryzen 3.
- Fix lockup at loading on Ryzen systems with RAID.
- New benchmark version (17.01).
--------------------------------------------------------------------------------------------------
1.78.3 - february 2017.
- AMD Ryzen (1.78.3)
- Intel kaby Lake processors.
- AMD embedded g and r-series processors.
- DMP VorteX86 DX3.
- Tons of bug fixes.
--------------------------------------------------------------------------------------------------
1.77 - august 2016.
- New benchmark "submit and compare" feature.
- New clocks diyalog reporting all system's clock speeds in real-time.
- Preliminary Support for Intel kaby Lake.
- AMD Bristol Ridge processors.
--------------------------------------------------------------------------------------------------
1.76 - april 2016.
- Intel Broadwell-E/EP processors.
- AvX512 instruction set report.
- Fixed several bugs (missing spd on some systems).
--------------------------------------------------------------------------------------------------
1.75 - january 2016.
- Intel Skylake Pentium and Celeron Support.
- Intel broadwell-e preliminary Support.
- AMD A10-7890K APU.
--------------------------------------------------------------------------------------------------
1.74 - octövber 2015.
- Improved CPU benchmark.
- AMD carrizo apus.
- Edram detection on slylake cpus.
--------------------------------------------------------------------------------------------------
1.73 - august 2015.
- New validation.
- Extreme overclock mode with light CPU load.
- New Tab: CPU benchmark.
- Added L4 cache Frequency (cache tab).
- Added Windows 10 editions.
--------------------------------------------------------------------------------------------------
1.72.1 - may 2015.
- Intel Skylake and broadwell Support (1.72.1)
- Preliminary Support for Intel Skylake.
- Fixed Support for Windows 10 Build 9926.
--------------------------------------------------------------------------------------------------
1.71.1 - november 2014.
- Intel Core m processors (1.71.1)
- New CPU-Z logo (1.71.1)
- AMD Athlon X2 450, Athlon X4 840 and Athlon X4 860k (kaveri).
- AMD FX-8370, FX-8370E, FX-8320E (vishera).
- Improved Support for Intel X99 chipset.
- Support for Microsoft Windows 10.
--------------------------------------------------------------------------------------------------
1.70 - july 2014.
- Intel i7-5960X, i7-5930K, i7-5820K, i7-4790K, i5-4690K, Pentium g3258.
- Tsx instructions set Support (including rtm and hle subparts).
--------------------------------------------------------------------------------------------------
1.69. 2 - april 2014.
- Intel haswell-e processors (1.69. 2)
- Preliminary Support for DDR4 Memory (1.69. 2)
- AMD fch detection improved (1.69. 2)
- AMD A6-6420K, A4-6320, A4-4020.
- AMD Athlon 5350 & 5150, Sempron 3850 & 2650 kabini.
- Intel Core i7-4770R and Core i5-4570R Crystal well.
- Added graphic Card vendor.
--------------------------------------------------------------------------------------------------
1.68 - january 2014.
- AMD kaveri apus (A10-7850K, A10-7800, A10-7700K, A8-7600, A6-7400K, A4-7300).
- Intel i7-4790, i5-4690, i5-4590, i5-4460 (haswell refresh).
- Intel Celeron Haswell (G1830, G1820).
- Intel serie 9 chipset (Z97).
- Nuvoton NCT6106 and smsc SCH5636 sıos (fujitsu mainboards).
--------------------------------------------------------------------------------------------------
1.67.1 - november 2013.
- Fix several validations issues (1.67.1).
- Improved Support of Intel silvermont (bay trail).
- New validation.
--------------------------------------------------------------------------------------------------
1.66 - august 2013.
- Intel Core i7-4xxx MQ/MX processors (1.66. 1)
- Fixed BCLK jump bug and validation issue (1.66. 1)
- Intel Xeon E5-2600 v2, Core i3-4xxx, Core i7-3910K processors.
- Intel atom bay trail-t preliminary Support.
- Intel ıvy Bridge-E/EP/EX Support improved.
- AMD Opteron 3200 and 3300 series.
- Ite IT8603 and IT8623 sıos (asus FM2+ mainboards).
- Microsoft Windows 8.1 (windows blue).
- New version checker.
--------------------------------------------------------------------------------------------------
1.65 - june 2013.
- AMD Opteron X1150 and X2150.
- AMD FX-9590 and fx-9370.
- Intel 4xxxhq "Crystalwell" cpus.
- Intel Pentium "haswell" G3430, G3420, G3220.
--------------------------------------------------------------------------------------------------
1.64 - april 2013.
- Intel atom cloverview.
- Intel ıvy Bridge-E/EP/EX.
- AMD richland apus.
--------------------------------------------------------------------------------------------------
1.63 - february 2013.
- Intel Pentium & Celeron "ıvy bridge" cpus.
- AMD Athlon X4 750k.
- Fma3 & 4 instructions sets.
- Support for systems with more than 64 cpus.
- Report TDP'in validation pages.
--------------------------------------------------------------------------------------------------
1.62 - octövber 2012.
- AMD "vishera" processors.
- Intel Haswell & ıvy bridge e/ep preliminary Support.
- Reduce CPU utilization.
- Improved validation process.
--------------------------------------------------------------------------------------------------
1.61 - july 2012.
- Fix wrong clock Speed report (1.61.3).
- Intel cedartrail platform.
- VIA VX11 chipset.
- Intel Xeon E5 processors.
- Fix wrong CPU clock Speed under Win8.
--------------------------------------------------------------------------------------------------
1.60 - march 2012.
- Intel Core i5 2550K, 2450P and 2380P with no GPU.
- Intel Core i3/i5/i7 "ıvy bridge" (37xx, 35xx, 34xx, 33xx, 32xx).
- Intel Xeon E3 (sandybridge-ws).
- Intel Z77 platform.
- AMD FX-8140, fx-4150.
- AMD "trinity" APU preliminary Support.
- Windows 32/64-bit information.
--------------------------------------------------------------------------------------------------
1.59 - november 2011.
- AMD Opteron ınterlagos and valencia (bulldozer).
- AMD SR56x0 ı/o bridge and SP5100 southbridge (maranello).
- Intel Core i7-3960X, 3930K and 3820 (sandybridge-e).
- Intel X79 chipset (jaketown).
- VIA nano 1000/2000/3000, eden X2, nano X2/X3, quadcore.
- Support for Windows 8.
--------------------------------------------------------------------------------------------------
1.58 - june 2011.
- AMD FX "bulldozer" processors family (K15).
- AMD llano processors family (K12).
- Intel sandy bridge-ep processors preliminary Support.
--------------------------------------------------------------------------------------------------
1.57 - february 2011.
- Intel Xeon "westmere-ex" Support.
- GPU Frequency report on Intel sandy bridge Processor.
- AMD Zacate/Ontario processors Support.
- Report TDP on main page when available.
- Cores clocks on floating menu.
- P67/H67 stepping report.
--------------------------------------------------------------------------------------------------
1.56 - octövber 2010.
- Intel Core i3/i5/i7 "2000" serie processors (sandy bridge) with New logos.
- Intel Core i7 970 "gulftown".
- Intel P67 chipset.
- AMD Phenom II, Athlon II and Sempron II "caspian" processors.
--------------------------------------------------------------------------------------------------
1.55 - july 2010.
- VIA VX900/VX900M and VN1000/VN1000M chipsets.
- Intel Core i5-760, Core i7-875K and Core i5-655K processors.
- Intel Core i7-940Xm, 840qm, 740qm Mobile processors.
- Intel Core i5-450M, 540'um, 430'um, Core i3-370M Mobile processors.
- Intel Pentium P6000 PROcessor.
- New parameter in CPU-Z. İni: Usedisplayapı.
--------------------------------------------------------------------------------------------------
1.54 - march 2010.
- Intel Core i7-880, Core i5-680, Core i3-550 processors.
- Intel Xeon 5600 line (32nm) processors.
- AMD Phenom II X6, Sempron II, turion II, turion II Ultra and Athlon II Mobile "caspian" processors.
- NVIDIA GeForce 320M chipset.
- AMD 870/880G/890GX + SB800/SB850 chipset.
- Introduction of validation rooms.
--------------------------------------------------------------------------------------------------
1.53 - december 2009.
- Fix validation issue with AMD Phenom processors (1.53.1).
- Preliminary Support for Intel pinetrail platform (1.53.1).
- Intel Core i7 930 & 950, Core i7 980X "gulftown", Xeon W3565.
- Intel Mobile Core i7/i5/i3 "arrendale" (lv and ulv).
- Intel "clarkdale" platform improved Support.
- AMD Phenom FX-5000, Athlon II X2/X3/X4, Athlon l110.
- AMD AM3 socket detection improved.
- VIA VX800 and VX855 chipsets Support.
- ATI Radeon 2100 and Radeon X1250 Support.
- DirectX 11 detection fix.
- Hardware virtualization Support Now reported as instructions set.
- New HTML report with less information.
--------------------------------------------------------------------------------------------------
1.52 - july 2009.
- Fix Core i7 clock bug (1.52.2)
- New design with "graphics" Tab.
- NVIDIA nforce 980a chipset Support.
- Intel Core i5 and Core i3 processors.
- Intel atom Z530, Pentium DC E6300 (2.8ghz) and Core 2 solo processors.
- Intel P55 and US15W chipsets preliminary Support.
- AMD Phenom twkr Support.
- AMD Phenom X2 "callisto" and Athlon X2 "regor" processors.
- AMD Opteron 6-core "ıstanbul" Processor.
- Improved Support for Windows 7.
- New Intel logos.
MD5 checksum: Please refer to CPU-Z | Softwares | CPUID
--------------------------------------------------------------------------------------------------
1.51 - april 2009.
- New version with installer.
- NVIDIA ıon platform.
- Intel "clarkdale" Processor preliminary Support.
MD5 checksum: Please refer to CPU-Z | Softwares | CPUID
--------------------------------------------------------------------------------------------------
1.50 - february 2009.
- Improved Support for AMD Phenom II Processor.
- Support for NVIDIA 740i chipset.
- Several bug fixes.
MD5 cpuz.exe (1.50): E1C827C54F527404EDDA6D65DA0280D8.
--------------------------------------------------------------------------------------------------
1.49 - december 2008.
- AMD Phenom II Processor.
- New Intel Core 2 models.
- Improved loading Ti'me.
- New Online validation process.
MD5 cpuz.exe (1.49): B836E86B40D7AFAF99D9C512E8CC9FEF.
--------------------------------------------------------------------------------------------------
1.48 - octövber 2008.
- Improved Support for Intel Core i7 (bloomfield & gainestown).
- Intel atom dual-core version Support.
- AMD Athlon "kuma" Processor Support.
- Alternate clock computation method based on "duty cycles" for Intel Core 2 processors (see showdutycycles in CPU-Z. İni)
MD5 cpuz.exe (1.48): DB78FBF1F99B7709240B495E59758CCE.
--------------------------------------------------------------------------------------------------
1.47 - august 2008.
- Intel Core i7 Processor.
- Intel Core 2 Duo s Mobile processors.
- NVIDIA MCP79/7A chipset.
- AMD 790gx / SB750 chipset.
MD5 cpuz.exe (1.47): A7484EFA3C32BC968C248CB1237FF493.
--------------------------------------------------------------------------------------------------
1.46 - june 2008.
- AMD puma platform (turion & turion Ultra "griffin");
- AMD Black Edition processors.
- Intel Xeon ex "dunnington".
MD5 cpuz.exe (1.46): C47432C41EC26156128F7B8E09E884CF.
--------------------------------------------------------------------------------------------------
1.45 - may 2008.
- Intel atom Z500/Z510/Z520/Z530/Z540 processors.
- Intel Core 2 Duo E7x00 PROcessor.
- AMD 45 nm Phenom (dened & shanghai) processors.
- Intel P45 chipset.
MD5 cpuz.exe (1.45): DD4E540C04297CF93DC721166C13446E.
--------------------------------------------------------------------------------------------------
1.44. 2 - mars 2008.
- NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44. 2)
- Intel G35 chipset (1.44. 2)
- Updated Support for VIA chipsets (1.44. 2)
- Support for the New validator (1.44. 1)
- Preliminary Support for VIA ısaiah Processor.
- Support for all VIA model D processors: VIA C7-M, VIA C7-d, VIA eden, VIA eden.
- Memory timings on Intel 5400A/B mch (skulltrail).
- Fix AMD Phenom detection issue on Windows Vista 64.
MD5 (1.44. 2): 81FB48A6EC7355E8D0DD71ADC2157CF6.
--------------------------------------------------------------------------------------------------
1.43 - january 2008.
- Intel skulltrail platform Support (core 2 Extreme QX9775 + 5400B mch).
- Intel X48 chipset detection.
- AMD Athlon 64-le 1600 and 1620 Support.
- Fix detection issues on unlocked Phenom (ES/BE).
--------------------------------------------------------------------------------------------------
1.42 - november 2007.
- Intel Wolfdale/Yorkfield/Penryn cpus Support.
- AMD Phenom and Opteron Barcelona Support improved.
- Current Core selection menu (right Click on the CPU page).
- Loading progress.
--------------------------------------------------------------------------------------------------
1.41 - september 2007.
- New CPU voltage monitöring.
- Intel Xeon tigerton Support.
- Intel IA64 cpus Support (ıtanium / ıtanium2)(special thanks to RAM'i radi and ray hinchliffe).
- AMD K10 Phenom preliminary Support.
- NVIDIA mcP73 Support.
- Intel XMP profiles Support.
- Memory modules nominal voltage.
--------------------------------------------------------------------------------------------------
1.40. 5 - july 2007.
- NVIDIA nforce 560 chipset Support.
- Intel dynamic FSB Technology Support.
- Athlon 64 X2 be & Sempron'le (tdp 45w).
- SiS671/FX/DX/MX northbridge Support.
- Sis968 southbridge Support.
--------------------------------------------------------------------------------------------------
1.40 - may 2007.
- VIA P4M800CE chipset Support.
- Preliminary Support for Intel penryn cpus family (45 nm).
- Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition.
- Intel P35, G33, G31, Q35, Q33, X38 chipsets Support.
- Intel GL960/GM965/PM965 chipsets Support.
- AMD Athlon 64 "lima" Processor Support.
- AMD geode lx Processor Support.
- NVIDIA nforce 520 chipset Support.
- New parameter "-console" to generate output in a command prompt (windows XP only).
- New icon.
--------------------------------------------------------------------------------------------------
1.39 - february 2007.
- Windows Vista 64 Support.
- VIA CX700/VX700 chipset.
- Added merom xe (X7900/X7800)
- Added "pcı" and "maxpcıbus" in the ini file to configure PCI scanning.
- Added "-core" parameter to display the clock Speed of the specified Core.
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.38 - november 2006.
- VIA P4M890 and P4M900 chipsets.
- NVIDIA 650i and 680i chipset.
- AMD Athlon 64 fx-7X Processor.
- Core 2 Duo E6850, E6750, E6650 processors.
- Socket 775 Xeon Processor.
- New parameters "-txt" and "-html" (see above).
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.37 - octövber 2006.
- Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 Support.
- Changed sse4 to ssse3 (supplemental sse3).
- Added VIA VT8237A southbridge.
- New HTML report.
- Several bug fixes.
--------------------------------------------------------------------------------------------------
1.36 - august 2006.
- New Processor information display.
- Intel 5000X/P/Z/V spd Support.
- Intel Pentium D 925 & 945.
--------------------------------------------------------------------------------------------------
1.35 - june 2006.
- ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets Support.
- ATI SB600 southbridge Support.
- Intel P965 chipset Support.
- Engineering samples Core based cpus report.
- Windows Vista product line report.
--------------------------------------------------------------------------------------------------
1.34. 1 - may 2006.
- AMD socket AM2/S1/F (rev F.) Cpus Support.
- Enhanced performance profile (epp) Memory information report.
- Added trc (bank cycle time) in DDR2 spd report.
- Added trc (bank cycle time) on i925, i945, i955, i975 chipsets.
- Fb-dımm DDR2 spd information report.
- Core 2 Duo names and logos added.
- Turion 64 X2 logo added.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.33.1 - april 2006.
- Intel i965 chipset Support added.
- Fix spd detection problem on sis 964/965/966 southbridges.
- Odc (odd divisor correct) for Athlon64 rev e.
--------------------------------------------------------------------------------------------------
1.33 - april 2006.
- Memory command Rate timing added.
- Improved Support for Intel Conroe/Merom cpus.
- Celeron m 420/430 yonah.
- Xeon Dual Core dempsey.
- VIA C7-M CPU detection added.
- VIA PT880, PT880 Pro, K8T900 chipsets Support.
- NVIDIA nforce 550/560/570 (mcp55) chipset Support.
- VIA VT8251 southbridge Support.
- Fixed hypertransport information misreports (in dump file).
- Added k6-2 and k6-ııı logos.
--------------------------------------------------------------------------------------------------
1.32.1 - march 2006.
- New Intel logos.
- Added Pentium D 925, Pentium E'e 965.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.32 - february 2006.
- Athlon FX-60 detection added.
- Athlon64 New Memory dividers.
- Celeron 35X cedar mill, Pentium D 805.
- Core solo & Core Duo detection improved.
- VIA C7 CPU detection added.
- Intel I975X, I945GT chipsets Support.
- ATI RD580 chipset Support.
- Uli smbus Support improved.
- Fix smbus conflict with clockgen.
--------------------------------------------------------------------------------------------------
1.31 - november 2005.
- Improved Support for ATI RS480/482 chipsets.
- GeForce 6100/6150 (nforce 410/430) chipsets Support.
- Intel E7520 chipset Support.
- New cpus Support: AMD Opteron socket 939, Intel Pentium 4 cedar mill and presler,
Intel Xeon paxville, Intel Pentium m yonah sc & DC.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.30 - august 2005.
- Latest Sempron and turion Support improved.
- Intel Xeon potomac, Pentium m 780 Support.
- Improved Windows version report.
- Support for smbus on latest sis bridges (964, 965, 966) and uli bridges.
- Increased clocks Refresh Rate.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.29 - june 2005.
- New PCI devices report.
- Switch for Vcore report in. İni file.
- Vcore report on some uguru mainboards.
- Improved clocks computation.
- Improved Support for latest AMD cpus, Celeron D 3x1 (EM64t).
- Improved Support for sis 649, 650 and 656 chipsets, Intel 915pm chipset.
- Improved stability when several instances of CPU-Z are running in the same Ti'me.
- Restored HTML report in Ghost mode (see "parameters" chapter above).
--------------------------------------------------------------------------------------------------
1.28.6 - march 2005.
- Support for Athlon 64 X2 cpus.
- Support for I955X chipset.
- Bunch of bugs.
--------------------------------------------------------------------------------------------------
1.28 - march 2005.
- Support for sis chipsets improved: 648FX, 649, 655FX, 655tx, 656.
- Support for NVIDIA nforce4 SLI Intel Edition.
- Support for Intel Pentium D, Pentium xe, AMD turion, Opteron 252.
- New F7 Key to simplifiy the creation of the validation file.
--------------------------------------------------------------------------------------------------
1.27 - february 2005.
- Support for Intel Pentium 4 6xx cpus.
- New validation System.
- Hundred of bug fixes.
--------------------------------------------------------------------------------------------------
1.26 - december 2004.
- Vcore display on Pentium m cpus.
- New CPU clock computation.
- Improved Support of transmeta cpus.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.25 - november 2004.
- NVIDIA nforce4 chipset Support.
- Intel Pentium 4J Support.
- New button to Refresh Memory timings.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.24 - september 2004.
- AMD Sempron Support.
- New Memory spd page.
- Pcı-express graphic interface Support.
- Configuration file.
- External cache latency tool.
- Restored HTML report.
- Fix several bugs.
--------------------------------------------------------------------------------------------------
1.23 - june 2004.
- Intel i915P/G, I925X chipsets Support.
- Intel LGA775 cpus Support.
- Intel's CPU number display.
- New AMD Athlon 64 steppings.
- New report in One file.
--------------------------------------------------------------------------------------------------
1.22 - april 2004.
- New cpus: Xeon nocona, Celeron prescott.
- DDR2 Memory Support.
- Clock mode when iconized.
--------------------------------------------------------------------------------------------------
1.21 - january 2004.
- One file package.
- Windows 64 Support.
- New chipsets Support.
- New CPU Support: Celeron M, Pentium 4 "prescott"
--------------------------------------------------------------------------------------------------
1.20a - octövber 2003.
- Memory Frequency and ratio on nforce2.
- KT600 Support.
- W83627THF VRM mode.
- Spd read improvement.
- Fix some Memory leaks (dmı)
- Fix Memory size report.
- Fix agp side band status.
--------------------------------------------------------------------------------------------------
CPU-Z Readme file
------------------
Version 1.94.8
November 2020
Contact : cpuz@cpuid.com
Web page: CPU-Z | Softwares | CPUID
Validation page : CPU-Z VALIDATOR
Hall of Fame : CPU-Z Validator - World Records
CPUID SDK : CPUID DEVELOPERS CORNER
Configuration file (cpuz.ini)
------------------------------
The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :
[CPU-Z]
VERSION=x.x.x.x
TextFontName=
TextFontSize=14
TextFontColor=000080
LabelFontName=
LabelFontSize=14
ACPI=1
PCI=1
MaxPCIBus=256
DMI=1
Sensor=1
SMBus=1
Display=1
UseDisplayAPI=1
BusClock=1
Chipset=1
SPD=1
XOC=0
CheckUpdates=1
- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable.
- PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable.
- SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable.
- Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable.
- UseDisplayAPI : Set to 1, uses the display driver to read the display adapters information.
- BusClock : Set to 1, uses the bus clock as primary clock source. Set to 0 to use an alternate method.
- Chipset : set to OFF (or 0) disables the memory controller and southbridge information. 1 to enable.
- SPD : set to 0 to disable SPD reading. 1 to enable.
- XOC : eXtreme Overclock Mode : runs CPU-Z with as little system load as possible. Your system won't be fully validated before it is manually checked. Requires to restart CPU-Z.
- CheckUpdates : set to 0 to disable the new version checker at startup. 1 to enable.
Parameters
----------
-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.
-html=filename : Same as "-txt" except it generates the html report.
-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).
-bench : runs CPU-Z without interface, runs the benchmark, and saves the result in a TXT file named like the machine.
Keys
----
F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory
Cache Latency Tool
------------------
The cache latency tool can be downloaded at that address : http://download.cpuid.com/misc/latency.zip
History
-------
--------------------------------------------------------------------------------------------------
1.94.8 - November 2020
- Intel Tiger Lake-U and Tiger Lake-H (1.94.8).
- Intel Z590 (1.94.8).
- NVIDIA RTX 3070 GPU (1.94.8).
- AMD Ryzen 5000 Vermeer preliminary support.
- Intel Rocket Lake preliminary support.
- GPU TDP.
--------------------------------------------------------------------------------------------------
1.93 - August 2020
- AMD Ryzen 7 PRO 4750G, Ryzen 5 PRO 4650G, Ryzen 3 PRO 4350G.
- Intel Tiger Lake platform.
--------------------------------------------------------------------------------------------------
1.92.2 - June 2020
- AMD Ryzen 9 3900XT, Ryzen 7 3800XT and Ryzen 5 3600XT (1.92.2).
- AMD B550 chipset (1.92.2).
- Hygon processors preliminary support (1.92.2).
- Intel Z490/W480/B460 Comet Lake platform support.
- AMD "Renoir" Ryzen APU.
- AMD Ryzen 3 3100 & 3300X.
- Windows 10 on ARM processor preliminary support.
--------------------------------------------------------------------------------------------------
1.91 - December 2019
- AMD Ryzen Threadripper 3960X, 3970X and 3990X.
- Intel Core 10xxx Comet Lake processors.
- Centaur Haul CHA w/ AI hardware preliminary support.
--------------------------------------------------------------------------------------------------
1.90 - August 2019
- AMD Ryzen 3000 PRO (1.90.1).
- Intel Comet Lake preliminary support (1.90.1).
- AMD Ryzen Threadripper 3000 preliminary support.
- Intel Ice-Lake preliminary support.
- NVIDIA RTX 2070 and 2080 Super.
--------------------------------------------------------------------------------------------------
1.89 - June 2019
- Preliminary support of AMD Ryzen 3000 (1.89.1)
- Intel Cascade Lake processors (1.89.1)
- Zhaoxin ZX-5000 and ZX-6000 processors families support.
- AMD APU Ryzen Picasso detection fix.
--------------------------------------------------------------------------------------------------
1.88 - March 2019
- Intel 9400F, 9600KF, 9700KF and 9900KF and 9th gen R0 stepping.
- AMD APU Ryzen Picasso preliminary support.
- DDR4 SDRAM chips manufacturer.
- AMD Radeon VII (Vega 20).
- NVIDIA GTX 1660 and 1660 Ti.
--------------------------------------------------------------------------------------------------
1.87 - November 2018
- Intel Basin Falls Skylake-X refresh.
- NVIDIA GeForce RTX serie 20.
- New AVX2 and AVX512 benchmarks (beta versions).
--------------------------------------------------------------------------------------------------
1.86 - August 2018
- Intel 9th generation Core family (Coffee Lake 9900K, 9700K, 9600K, 9600, 9500 and 9400).
- Intel Coffee Lake-U processors.
--------------------------------------------------------------------------------------------------
1.85 - May 2018
- AMD AGESA version report in BIOS information.
- Increased clocks refresh rate.
- Fix initialization error on Windows XP and 7.
--------------------------------------------------------------------------------------------------
1.84 - March 2018
- Intel new Coffee Lake desktop and mobile processors.
- New timers tool.
- New "-bench" parameter.
--------------------------------------------------------------------------------------------------
1.83 - January 2018
- AMD desktop Raven Ridge APU (AM4).
- Windows 10 Build 16299.
--------------------------------------------------------------------------------------------------
1.82 - December 2017
- AMD Raven Ridge processors support (1.82.1)
- Intel Xeon Phi Knight Landing preliminary support.
- Fix BCLK fluctuations on SKL-X.
- The benchmark does now support systems with more than 64 CPUs.
--------------------------------------------------------------------------------------------------
1.81.1 - October 2017
- Intel Coffee Lake processors and Z370 platform.
- Intel Skylake-X HCC processors.
- Intel Xeon Skylake-SP and Xeon W Skylake processors.
--------------------------------------------------------------------------------------------------
1.80.2 - September 2017
- Intel Core X processors (KBL-X and SKL-X).
- Preferred core(s) display in clocks dialog.
- Fix 32-bit version issue with Windows 10 builds 16273 and 16275 (1.80.2)
--------------------------------------------------------------------------------------------------
1.79.1 - May 2017
- Intel X299 (1.79.1).
- AMD ThreadRipper (1.79.1).
- AMD Ryzen 5 and Ryzen 3.
- Fix lockup at loading on Ryzen systems with RAID.
- New benchmark version (17.01).
--------------------------------------------------------------------------------------------------
1.78.3 - February 2017
- AMD Ryzen (1.78.3)
- Intel Kaby Lake processors.
- AMD Embedded G and R-series processors.
- DMP Vortex86 DX3.
- Tons of bug fixes.
--------------------------------------------------------------------------------------------------
1.77 - August 2016
- New benchmark "submit and compare" feature.
- New clocks dialog reporting all system's clock speeds in real-time.
- Preliminary support for Intel Kaby Lake.
- AMD Bristol Ridge processors.
--------------------------------------------------------------------------------------------------
1.76 - April 2016
- Intel Broadwell-E/EP processors.
- AVX512 instruction set report.
- Fixed several bugs (missing SPD on some systems).
--------------------------------------------------------------------------------------------------
1.75 - January 2016
- Intel Skylake Pentium and Celeron support.
- Intel Broadwell-E preliminary support.
- AMD A10-7890K APU.
--------------------------------------------------------------------------------------------------
1.74 - October 2015
- Improved CPU benchmark.
- AMD Carrizo APUs.
- eDRAM detection on Slylake CPUs.
--------------------------------------------------------------------------------------------------
1.73 - August 2015
- New validation.
- eXtreme Overclock Mode with light CPU load.
- New tab : CPU Benchmark.
- Added L4 cache frequency (cache tab).
- Added Windows 10 editions.
--------------------------------------------------------------------------------------------------
1.72.1 - May 2015
- Intel Skylake and Broadwell support (1.72.1)
- Preliminary support for Intel Skylake.
- Fixed support for Windows 10 build 9926.
--------------------------------------------------------------------------------------------------
1.71.1 - November 2014
- Intel Core M processors (1.71.1)
- New CPU-Z logo (1.71.1)
- AMD Athlon X2 450, Athlon X4 840 and Athlon X4 860K (Kaveri).
- AMD FX-8370, FX-8370E, FX-8320E (Vishera).
- Improved support for Intel X99 chipset.
- Support for Microsoft Windows 10.
--------------------------------------------------------------------------------------------------
1.70 - July 2014
- Intel i7-5960X, i7-5930K, i7-5820K, i7-4790K, i5-4690K, Pentium G3258.
- TSX instructions set support (including RTM and HLE subparts).
--------------------------------------------------------------------------------------------------
1.69.2 - April 2014
- Intel Haswell-E processors (1.69.2)
- Preliminary support for DDR4 memory (1.69.2)
- AMD FCH detection improved (1.69.2)
- AMD A6-6420K, A4-6320, A4-4020.
- AMD Athlon 5350 & 5150, Sempron 3850 & 2650 Kabini.
- Intel Core i7-4770R and Core i5-4570R Crystal Well.
- Added graphic card vendor.
--------------------------------------------------------------------------------------------------
1.68 - January 2014
- AMD Kaveri APUs (A10-7850K, A10-7800, A10-7700K, A8-7600, A6-7400K, A4-7300).
- Intel i7-4790, i5-4690, i5-4590, i5-4460 (Haswell refresh).
- Intel Celeron Haswell (G1830, G1820).
- Intel serie 9 chipset (Z97).
- Nuvoton NCT6106 and SMSC SCH5636 SIOs (Fujitsu mainboards).
--------------------------------------------------------------------------------------------------
1.67.1 - November 2013
- Fix several validations issues (1.67.1).
- Improved support of Intel Silvermont (Bay Trail).
- New validation.
--------------------------------------------------------------------------------------------------
1.66 - August 2013
- Intel Core i7-4xxx MQ/MX processors (1.66.1)
- Fixed BCLK jump bug and validation issue (1.66.1)
- Intel Xeon E5-2600 V2, Core i3-4xxx, Core i7-3910K processors.
- Intel Atom Bay Trail-T preliminary support.
- Intel Ivy Bridge-E/EP/EX support improved.
- AMD Opteron 3200 and 3300 series.
- ITE IT8603 and IT8623 SIOs (Asus FM2+ mainboards).
- Microsoft Windows 8.1 (Windows Blue).
- New version checker.
--------------------------------------------------------------------------------------------------
1.65 - June 2013
- AMD Opteron X1150 and X2150.
- AMD FX-9590 and FX-9370.
- Intel 4xxxHQ "Crystalwell" CPUs.
- Intel Pentium "Haswell" G3430, G3420, G3220.
--------------------------------------------------------------------------------------------------
1.64 - April 2013
- Intel Atom Cloverview.
- Intel Ivy Bridge-E/EP/EX.
- AMD Richland APUs.
--------------------------------------------------------------------------------------------------
1.63 - February 2013
- Intel Pentium & Celeron "Ivy Bridge" CPUs.
- AMD Athlon X4 750K.
- FMA3 & 4 instructions sets.
- Support for systems with more than 64 CPUs.
- Report TDP in validation pages.
--------------------------------------------------------------------------------------------------
1.62 - October 2012
- AMD "Vishera" processors.
- Intel Haswell & Ivy Bridge E/EP preliminary support.
- Reduce CPU utilization.
- Improved validation process.
--------------------------------------------------------------------------------------------------
1.61 - July 2012
- Fix wrong clock speed report (1.61.3).
- Intel CedarTrail platform.
- VIA VX11 chipset.
- Intel Xeon E5 processors.
- Fix wrong CPU clock speed under Win8.
--------------------------------------------------------------------------------------------------
1.60 - March 2012
- Intel Core i5 2550K, 2450P and 2380P with no GPU.
- Intel Core i3/i5/i7 "Ivy Bridge" (37xx, 35xx, 34xx, 33xx, 32xx).
- Intel Xeon E3 (SandyBridge-WS).
- Intel Z77 platform.
- AMD FX-8140, FX-4150.
- AMD "Trinity" APU Preliminary support.
- Windows 32/64-bit information.
--------------------------------------------------------------------------------------------------
1.59 - November 2011
- AMD Opteron Interlagos and Valencia (Bulldozer).
- AMD SR56x0 I/O bridge and SP5100 southbridge (Maranello).
- Intel Core i7-3960X, 3930K and 3820 (SandyBridge-E).
- Intel X79 chipset (Jaketown).
- VIA Nano 1000/2000/3000, Eden X2, Nano X2/X3, QuadCore.
- Support for Windows 8.
--------------------------------------------------------------------------------------------------
1.58 - June 2011
- AMD FX "Bulldozer" processors family (K15).
- AMD Llano processors family (K12).
- Intel Sandy Bridge-EP processors preliminary support.
--------------------------------------------------------------------------------------------------
1.57 - February 2011
- Intel Xeon "Westmere-EX" support.
- GPU frequency report on Intel Sandy Bridge processor.
- AMD Zacate/Ontario processors support.
- Report TDP on main page when available.
- Cores clocks on floating menu.
- P67/H67 stepping report.
--------------------------------------------------------------------------------------------------
1.56 - October 2010
- Intel Core i3/i5/i7 "2000" serie processors (Sandy Bridge) with new logos.
- Intel Core i7 970 "Gulftown".
- Intel P67 chipset.
- AMD Phenom II, Athlon II and Sempron II "Caspian" processors.
--------------------------------------------------------------------------------------------------
1.55 - July 2010
- VIA VX900/VX900M and VN1000/VN1000M chipsets.
- Intel Core i5-760, Core i7-875K and Core i5-655K processors.
- Intel Core i7-940XM, 840QM, 740QM mobile processors.
- Intel Core i5-450M, 540UM, 430UM, Core i3-370M mobile processors.
- Intel Pentium P6000 processor.
- New parameter in cpuz.ini : UseDisplayAPI
--------------------------------------------------------------------------------------------------
1.54 - March 2010
- Intel Core i7-880, Core i5-680, Core i3-550 processors.
- Intel Xeon 5600 line (32nm) processors.
- AMD Phenom II X6, Sempron II, Turion II, Turion II Ultra and Athlon II Mobile "Caspian" processors.
- NVIDIA GeForce 320M chipset.
- AMD 870/880G/890GX + SB800/SB850 chipset.
- Introduction of validation rooms.
--------------------------------------------------------------------------------------------------
1.53 - December 2009
- Fix validation issue with AMD Phenom processors (1.53.1).
- Preliminary support for Intel Pinetrail platform (1.53.1).
- Intel Core i7 930 & 950, Core i7 980X "Gulftown", Xeon W3565.
- Intel Mobile Core i7/i5/i3 "Arrendale" (LV and ULV).
- Intel "Clarkdale" platform improved support.
- AMD Phenom FX-5000, Athlon II X2/X3/X4, Athlon L110.
- AMD AM3 socket detection improved.
- VIA VX800 and VX855 chipsets support.
- ATI Radeon 2100 and Radeon X1250 support.
- DirectX 11 detection fix.
- Hardware virtualization support now reported as instructions set.
- New HTML report with less information.
--------------------------------------------------------------------------------------------------
1.52 - July 2009
- Fix Core i7 clock bug (1.52.2)
- New design with "Graphics" tab.
- NVIDIA nForce 980a chipset support.
- Intel Core i5 and Core i3 processors.
- Intel Atom Z530, Pentium DC E6300 (2.8GHz) and Core 2 Solo processors.
- Intel P55 and US15W chipsets preliminary support.
- AMD Phenom TWKR support.
- AMD Phenom X2 "Callisto" and Athlon X2 "Regor" processors.
- AMD Opteron 6-core "Istanbul" processor.
- Improved support for Windows 7.
- New Intel logos.
MD5 checksum : please refer to CPU-Z | Softwares | CPUID
--------------------------------------------------------------------------------------------------
1.51 - April 2009
- New version with installer.
- NVIDIA ION platform.
- Intel "Clarkdale" processor preliminary support.
MD5 checksum : please refer to CPU-Z | Softwares | CPUID
--------------------------------------------------------------------------------------------------
1.50 - February 2009
- Improved support for AMD Phenom II processor.
- Support for NVIDIA 740i chipset.
- Several bug fixes.
MD5 cpuz.exe (1.50) : E1C827C54F527404EDDA6D65DA0280D8
--------------------------------------------------------------------------------------------------
1.49 - December 2008
- AMD Phenom II processor.
- New Intel Core 2 models.
- Improved loading time.
- New online validation process.
MD5 cpuz.exe (1.49) : B836E86B40D7AFAF99D9C512E8CC9FEF
--------------------------------------------------------------------------------------------------
1.48 - October 2008
- Improved support for Intel Core i7 (Bloomfield & Gainestown).
- Intel Atom dual-core version support.
- AMD Athlon "Kuma" processor support.
- Alternate clock computation method based on "duty cycles" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini)
MD5 cpuz.exe (1.48) : DB78FBF1F99B7709240B495E59758CCE
--------------------------------------------------------------------------------------------------
1.47 - August 2008
- Intel Core i7 processor.
- Intel Core 2 Duo S Mobile processors.
- NVIDIA MCP79/7A chipset.
- AMD 790GX / SB750 chipset.
MD5 cpuz.exe (1.47) : A7484EFA3C32BC968C248CB1237FF493
--------------------------------------------------------------------------------------------------
1.46 - June 2008
- AMD Puma platform (Turion & Turion Ultra "Griffin");
- AMD Black Edition processors.
- Intel Xeon EX "Dunnington".
MD5 cpuz.exe (1.46) : C47432C41EC26156128F7B8E09E884CF
--------------------------------------------------------------------------------------------------
1.45 - May 2008
- Intel Atom Z500/Z510/Z520/Z530/Z540 processors.
- Intel Core 2 Duo E7x00 processor.
- AMD 45 nm Phenom (Dened & Shanghai) processors.
- Intel P45 chipset.
MD5 cpuz.exe (1.45) : DD4E540C04297CF93DC721166C13446E
--------------------------------------------------------------------------------------------------
1.44.2 - Mars 2008
- NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2)
- Intel G35 chipset (1.44.2)
- Updated support for VIA chipsets (1.44.2)
- Support for the new validator (1.44.1)
- Preliminary support for VIA Isaiah processor.
- Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden.
- Memory timings on Intel 5400A/B MCH (Skulltrail).
- Fix AMD Phenom detection issue on Windows Vista 64.
MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6
--------------------------------------------------------------------------------------------------
1.43 - January 2008
- Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH).
- Intel X48 chipset detection.
- AMD Athlon 64-LE 1600 and 1620 support.
- Fix detection issues on unlocked Phenom (ES/BE).
--------------------------------------------------------------------------------------------------
1.42 - November 2007
- Intel Wolfdale/Yorkfield/Penryn CPUs support.
- AMD Phenom and Opteron Barcelona support improved.
- Current core selection menu (right click on the CPU page).
- Loading progress.
--------------------------------------------------------------------------------------------------
1.41 - September 2007
- New CPU voltage monitoring.
- Intel Xeon Tigerton support.
- Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe).
- AMD K10 Phenom preliminary support.
- NVIDIA MCP73 support.
- Intel XMP profiles support.
- Memory modules nominal voltage.
--------------------------------------------------------------------------------------------------
1.40.5 - July 2007
- NVIDIA nForce 560 chipset support.
- Intel Dynamic FSB technology support.
- Athlon 64 X2 BE & Sempron LE (TDP 45W).
- SiS671/FX/DX/MX northbridge support.
- SiS968 southbridge support.
--------------------------------------------------------------------------------------------------
1.40 - May 2007
- VIA P4M800CE chipset support.
- Preliminary support for Intel Penryn CPUs family (45 nm).
- Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition.
- Intel P35, G33, G31, Q35, Q33, X38 chipsets support.
- Intel GL960/GM965/PM965 chipsets support.
- AMD Athlon 64 "Lima" processor support.
- AMD Geode LX processor support.
- NVIDIA nForce 520 chipset support.
- New parameter "-console" to generate output in a command prompt (Windows XP only).
- New icon.
--------------------------------------------------------------------------------------------------
1.39 - February 2007
- Windows Vista 64 support.
- VIA CX700/VX700 chipset.
- Added Merom XE (X7900/X7800)
- Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning.
- Added "-core" parameter to display the clock speed of the specified core.
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.38 - November 2006
- VIA P4M890 and P4M900 chipsets.
- NVIDIA 650i and 680i chipset.
- AMD Athlon 64 FX-7x processor.
- Core 2 Duo E6850, E6750, E6650 processors.
- socket 775 Xeon processor.
- New parameters "-txt" and "-html" (see above).
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.37 - October 2006
- Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support.
- Changed SSE4 to SSSE3 (Supplemental SSE3).
- Added VIA VT8237A southbridge.
- New HTML report.
- Several bug fixes.
--------------------------------------------------------------------------------------------------
1.36 - August 2006
- New processor information display.
- Intel 5000X/P/Z/V SPD support.
- Intel Pentium D 925 & 945.
--------------------------------------------------------------------------------------------------
1.35 - June 2006
- ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support.
- ATI SB600 southbridge support.
- Intel P965 chipset support.
- Engineering samples Core based CPUs report.
- Windows Vista product line report.
--------------------------------------------------------------------------------------------------
1.34.1 - May 2006
- AMD socket AM2/S1/F (rev F.) CPUs support.
- Enhanced Performance Profile (EPP) memory information report.
- Added Trc (bank cycle time) in DDR2 SPD report.
- Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets.
- FB-DIMM DDR2 SPD information report.
- Core 2 Duo names and logos added.
- Turion 64 X2 logo added.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.33.1 - April 2006
- Intel i965 chipset support added.
- Fix SPD detection problem on SiS 964/965/966 southbridges.
- ODC (Odd Divisor Correct) for Athlon64 rev E.
--------------------------------------------------------------------------------------------------
1.33 - April 2006
- Memory Command Rate timing added.
- Improved support for Intel Conroe/Merom CPUs.
- Celeron M 420/430 Yonah.
- Xeon Dual core Dempsey.
- VIA C7-M CPU detection added.
- VIA PT880, PT880 Pro, K8T900 chipsets support.
- nVidia nForce 550/560/570 (MCP55) chipset support.
- VIA VT8251 southbridge support.
- Fixed HyperTransport information misreports (in dump file).
- Added K6-2 and K6-III logos.
--------------------------------------------------------------------------------------------------
1.32.1 - March 2006
- New Intel logos.
- Added Pentium D 925, Pentium EE 965.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.32 - February 2006
- Athlon FX-60 detection added.
- Athlon64 new memory dividers.
- Celeron 35x Cedar Mill, Pentium D 805.
- Core Solo & Core Duo detection improved.
- VIA C7 CPU detection added.
- Intel i975X, i945GT chipsets support.
- ATI RD580 chipset support.
- ULi smbus support improved.
- Fix smbus conflict with ClockGen.
--------------------------------------------------------------------------------------------------
1.31 - November 2005
- Improved support for ATI RS480/482 chipsets.
- GeForce 6100/6150 (nForce 410/430) chipsets support.
- Intel E7520 chipset support.
- New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler,
Intel Xeon Paxville, Intel Pentium M Yonah SC & DC.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.30 - August 2005
- Latest Sempron and Turion support improved.
- Intel Xeon Potomac, Pentium M 780 support.
- Improved Windows version report.
- Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges.
- Increased clocks refresh rate.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.29 - June 2005
- New PCI devices report.
- Switch for VCore report in .ini file.
- VCore report on some uGuru mainboards.
- Improved clocks computation.
- Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T).
- Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset.
- Improved stability when several instances of CPU-Z are running in the same time.
- Restored html report in ghost mode (see "Parameters" chapter above).
--------------------------------------------------------------------------------------------------
1.28.6 - March 2005
- Support for Athlon 64 X2 CPUs
- Support for i955X chipset
- Bunch of bugs
--------------------------------------------------------------------------------------------------
1.28 - March 2005
- Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656
- Support for nVidia nForce4 SLI Intel Edition
- Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252
- New F7 key to simplifiy the creation of the validation file
--------------------------------------------------------------------------------------------------
1.27 - February 2005
- Support for Intel Pentium 4 6xx CPUs.
- New validation system.
- Hundred of bug fixes.
--------------------------------------------------------------------------------------------------
1.26 - December 2004
- VCore display on Pentium M CPUs.
- New CPU clock computation.
- Improved support of Transmeta CPUs.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.25 - November 2004
- nVidia nForce4 chipset support
- Intel Pentium 4J support
- New button to refresh memory timings
- Several bugs fixed
--------------------------------------------------------------------------------------------------
1.24 - September 2004
- AMD Sempron support
- New memory SPD page
- PCI-Express graphic interface support
- Configuration file
- External cache latency tool
- Restored html report
- Fix several bugs
--------------------------------------------------------------------------------------------------
1.23 - June 2004
- Intel i915P/G, i925X chipsets support
- Intel LGA775 CPUs support
- Intel's CPU number display
- New AMD Athlon 64 steppings
- New report in one file
--------------------------------------------------------------------------------------------------
1.22 - April 2004
- New CPUs : Xeon Nocona, Celeron Prescott
- DDR2 memory support
- Clock mode when iconized
--------------------------------------------------------------------------------------------------
1.21 - January 2004
- one file package
- Windows 64 support
- new chipsets support
- new CPU support : Celeron M, Pentium 4 "Prescott"
--------------------------------------------------------------------------------------------------
1.20a - October 2003
- memory frequency and ratio on nForce2
- KT600 support
- W83627THF VRM mode
- SPD read improvement
- Fix some memory leaks (DMI)
- Fix memory size report
- Fix AGP side band status
--------------------------------------------------------------------------------------------------