Çözüldü THREAD_STUCK_IN_DEVICE_DRIVER_M mavi ekran hatası

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
Durum
Mesaj gönderimine kapalı.

mesut3567

Centipat
Katılım
24 Ocak 2020
Mesajlar
3
ASUS TUF FX505DD BQ114 laptop aldım, daha elime salı günü ulaştı. Kurulumları, güncellemeleri tam olarak yapmaya çalıştım, iki kere bu thread stuck in device driver hatasını verdi. İkinci hatadan sonra PC açılırken BIOS'a girdi ve "BIOS upgrade is processing" yazdı, BIOS güncelledi galiba. Bilgisayar güzel, geri göndermekte istemiyorum ama donanımsal bir şey mi yazılımsal mı? Yardımcı olabilecek varsa sevinirim. Minidupları ekledim. Bir de GPU'nun olduğu taraftaki fan çalışırken biraz cızırtı yapıyor. Ekran kartıyla ilgili bir problem olma ihtimali canımı sıkıyor açıkçası.
 
Son düzenleyen: Moderatör:
Çözüm
Yüklediğin saçma programlar dahili ekran kartı sürücüsünü sıkıştırıyor.

Kaldır;
HWMonitor, AMDRyzenMasterDriver, MSI Afterburner, Asus yazılımları.

Dahili ekran kartı sürücüsünü DDU ile temizleyip tekrar yükle.
Kod:
THREAD_STUCK_IN_DEVICE_DRIVER_M (100000ea)
The device driver is spinning in an infinite loop, most likely waiting for
hardware to become idle. This usually indicates problem with the hardware
itself or with the device driver programming the hardware incorrectly.
If the kernel debugger is connected and running when watchdog detects a
timeout condition then DbgBreakPoint() will be called instead of KeBugCheckEx()
and detailed message including bugcheck arguments will be printed to the
debugger. This way we can identify an offending thread, set breakpoints in it,
and hit go to return to the spinning code to debug it further. Because
KeBugCheckEx() is not called the .bugcheck directive will not return bugcheck
information in this case. The arguments are already printed out to the kernel
debugger. You can also retrieve them from a global variable via
"dd watchdog!g_WdBugCheckData l5" (use dq on NT64).
On MP machines it is possible to hit a timeout when the spinning thread is
interrupted by hardware interrupt and ISR or DPC routine is running at the time
of the bugcheck (this is because the timeout's work item can be delivered and
handled on the second CPU and the same time). If this is the case you will have
to look deeper at the offending thread's stack (e.g. using dds) to determine
spinning code which caused the timeout to occur.
Arguments:
Arg1: ffffd004f0fc2080, Pointer to a stuck thread object.  Do .thread then kb on it to find
    the hung location.
Arg2: 0000000000000000, Pointer to a DEFERRED_WATCHDOG object.
Arg3: 0000000000000000, Pointer to offending driver name.
Arg4: 0000000000000000, Number of times "intercepted" bugcheck 0xEA was hit (see notes).

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for atikmdag.sys

KEY_VALUES_STRING: 1


PROCESSES_ANALYSIS: 1

SERVICE_ANALYSIS: 1

STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1


DUMP_CLASS: 1

DUMP_QUALIFIER: 400

BUILD_VERSION_STRING:  18362.1.amd64fre.19h1_release.190318-1202

SYSTEM_MANUFACTURER:  ASUSTeK COMPUTER INC.

SYSTEM_PRODUCT_NAME:  TUF Gaming FX505DD_FX505DD

SYSTEM_VERSION:  1.0

BIOS_VENDOR:  American Megatrends Inc.

BIOS_VERSION:  FX505DD.306

BIOS_DATE:  07/12/2019

BASEBOARD_MANUFACTURER:  ASUSTeK COMPUTER INC.

BASEBOARD_PRODUCT:  FX505DD

BASEBOARD_VERSION:  1.0

DUMP_TYPE:  2

BUGCHECK_P1: ffffd004f0fc2080

BUGCHECK_P2: 0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

FAULTING_THREAD:  ffffd004f0fc2080

DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_FAULT

CPU_COUNT: 8

CPU_MHZ: 830

CPU_VENDOR:  AuthenticAMD

CPU_FAMILY: 17

CPU_MODEL: 18

CPU_STEPPING: 1

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

BUGCHECK_STR:  0xEA

PROCESS_NAME:  MSIAfterburner.exe

CURRENT_IRQL:  0

ANALYSIS_SESSION_HOST:  DESKTOP-18V31A3

ANALYSIS_SESSION_TIME:  01-24-2020 23:06:56.0984

ANALYSIS_VERSION: 10.0.18362.1 x86fre

LAST_CONTROL_TRANSFER:  from fffff8075f880db5 to fffff807515c14e0

STACK_TEXT:
ffffe68c`9a20ba88 fffff807`5f880db5 : 00000000`000000ea ffffd004`f0fc2080 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
ffffe68c`9a20ba90 fffff807`5f880e8e : ffffe68c`9a20bb70 fffff807`5f85beab ffffe68c`9a20bb70 fffff807`67433954 : dxgkrnl!TdrTimedOperationBugcheckOnTimeout+0x45
ffffe68c`9a20bb00 fffff807`6739db00 : 000000a1`e8b8b091 fffff807`67433954 00000000`00000000 ffffd004`de9ac000 : dxgkrnl!TdrTimedOperationDelay+0xce
ffffe68c`9a20bb40 000000a1`e8b8b091 : fffff807`67433954 00000000`00000000 ffffd004`de9ac000 00000000`00989680 : atikmdag+0x6db00
ffffe68c`9a20bb48 fffff807`67433954 : 00000000`00000000 ffffd004`de9ac000 00000000`00989680 00000000`00000001 : 0x000000a1`e8b8b091
ffffe68c`9a20bb50 00000000`00000000 : ffffd004`de9ac000 00000000`00989680 00000000`00000001 00000000`00000028 : atikmdag+0x103954


STACK_COMMAND:  .thread 0xffffd004f0fc2080 ; kb

THREAD_SHA1_HASH_MOD_FUNC:  72fdf9c2701b15ee3875c8d84432bb6f4f878992

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  8733c7833060fb02ce8c6a0258e1674615927de1

THREAD_SHA1_HASH_MOD:  7711aec31f9092c0b1e7c4bf053e92961bf05370

FOLLOWUP_IP:
dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45
fffff807`5f880db5 cc              int     3

FAULT_INSTR_CODE:  cccccccc

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgkrnl

IMAGE_NAME:  dxgkrnl.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  0

IMAGE_VERSION:  10.0.18362.449

FAILURE_BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

PRIMARY_PROBLEM_CLASS:  0xEA_IMAGE_dxgkrnl.sys

TARGET_TIME:  2020-01-24T18:55:29.000Z

OSBUILD:  18362

OSSERVICEPACK:  592

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

SUITE_MASK:  272

PRODUCT_TYPE:  1

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

OSEDITION:  Windows 10 WinNt TerminalServer SingleUserTS

OS_LOCALE:

USER_LCID:  0

OSBUILD_TIMESTAMP:  1972-08-22 03:24:00

BUILDDATESTAMP_STR:  190318-1202

BUILDLAB_STR:  19h1_release

BUILDOSVER_STR:  10.0.18362.1.amd64fre.19h1_release.190318-1202

ANALYSIS_SESSION_ELAPSED_TIME:  1383c

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:0xea_image_dxgkrnl.sys

FAILURE_ID_HASH:  {ea458ad2-d5ab-aa6c-7a11-54653c70dfb8}

Followup:     MachineOwner
---------

THREAD_STUCK_IN_DEVICE_DRIVER_M (100000ea)
The device driver is spinning in an infinite loop, most likely waiting for
hardware to become idle. This usually indicates problem with the hardware
itself or with the device driver programming the hardware incorrectly.
If the kernel debugger is connected and running when watchdog detects a
timeout condition then DbgBreakPoint() will be called instead of KeBugCheckEx()
and detailed message including bugcheck arguments will be printed to the
debugger. This way we can identify an offending thread, set breakpoints in it,
and hit go to return to the spinning code to debug it further. Because
KeBugCheckEx() is not called the .bugcheck directive will not return bugcheck
information in this case. The arguments are already printed out to the kernel
debugger. You can also retrieve them from a global variable via
"dd watchdog!g_WdBugCheckData l5" (use dq on NT64).
On MP machines it is possible to hit a timeout when the spinning thread is
interrupted by hardware interrupt and ISR or DPC routine is running at the time
of the bugcheck (this is because the timeout's work item can be delivered and
handled on the second CPU and the same time). If this is the case you will have
to look deeper at the offending thread's stack (e.g. using dds) to determine
spinning code which caused the timeout to occur.
Arguments:
Arg1: ffff8a8a204d30c0, Pointer to a stuck thread object.  Do .thread then kb on it to find
    the hung location.
Arg2: 0000000000000000, Pointer to a DEFERRED_WATCHDOG object.
Arg3: 0000000000000000, Pointer to offending driver name.
Arg4: 0000000000000000, Number of times "intercepted" bugcheck 0xEA was hit (see notes).

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for atikmdag.sys

KEY_VALUES_STRING: 1


PROCESSES_ANALYSIS: 1

SERVICE_ANALYSIS: 1

STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1


DUMP_CLASS: 1

DUMP_QUALIFIER: 400

BUILD_VERSION_STRING:  18362.1.amd64fre.19h1_release.190318-1202

DUMP_TYPE:  2

BUGCHECK_P1: ffff8a8a204d30c0

BUGCHECK_P2: 0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

FAULTING_THREAD:  ffff8a8a204d30c0

DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_FAULT

CPU_COUNT: 8

CPU_MHZ: 830

CPU_VENDOR:  AuthenticAMD

CPU_FAMILY: 17

CPU_MODEL: 18

CPU_STEPPING: 1

CUSTOMER_CRASH_COUNT:  1

BUGCHECK_STR:  0xEA

PROCESS_NAME:  HWMonitor.exe

CURRENT_IRQL:  0

ANALYSIS_SESSION_HOST:  DESKTOP-18V31A3

ANALYSIS_SESSION_TIME:  01-24-2020 23:06:58.0756

ANALYSIS_VERSION: 10.0.18362.1 x86fre

LAST_CONTROL_TRANSFER:  from fffff80411460db5 to fffff80403dc14e0

STACK_TEXT:
fffff001`38821ab8 fffff804`11460db5 : 00000000`000000ea ffff8a8a`204d30c0 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff001`38821ac0 fffff804`11460e8e : fffff001`38821ba0 fffff804`1143beab fffff001`38821ba0 fffff804`19d03954 : dxgkrnl!TdrTimedOperationBugcheckOnTimeout+0x45
fffff001`38821b30 fffff804`19c6db00 : 00000079`6b73630d fffff804`19d03954 00000000`00000000 ffff8a8a`15a6e000 : dxgkrnl!TdrTimedOperationDelay+0xce
fffff001`38821b70 00000079`6b73630d : fffff804`19d03954 00000000`00000000 ffff8a8a`15a6e000 00000000`00989680 : atikmdag+0x6db00
fffff001`38821b78 fffff804`19d03954 : 00000000`00000000 ffff8a8a`15a6e000 00000000`00989680 00000000`00000001 : 0x00000079`6b73630d
fffff001`38821b80 00000000`00000000 : ffff8a8a`15a6e000 00000000`00989680 00000000`00000001 00000000`00000028 : atikmdag+0x103954


STACK_COMMAND:  .thread 0xffff8a8a204d30c0 ; kb

THREAD_SHA1_HASH_MOD_FUNC:  72fdf9c2701b15ee3875c8d84432bb6f4f878992

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  8733c7833060fb02ce8c6a0258e1674615927de1

THREAD_SHA1_HASH_MOD:  7711aec31f9092c0b1e7c4bf053e92961bf05370

FOLLOWUP_IP:
dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45
fffff804`11460db5 cc              int     3

FAULT_INSTR_CODE:  cccccccc

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgkrnl

IMAGE_NAME:  dxgkrnl.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  0

IMAGE_VERSION:  10.0.18362.449

FAILURE_BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

PRIMARY_PROBLEM_CLASS:  0xEA_IMAGE_dxgkrnl.sys

TARGET_TIME:  2020-01-22T10:00:31.000Z

OSBUILD:  18362

OSSERVICEPACK:  592

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

SUITE_MASK:  272

PRODUCT_TYPE:  1

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

OSEDITION:  Windows 10 WinNt TerminalServer SingleUserTS

OS_LOCALE:

USER_LCID:  0

OSBUILD_TIMESTAMP:  1972-08-22 03:24:00

BUILDDATESTAMP_STR:  190318-1202

BUILDLAB_STR:  19h1_release

BUILDOSVER_STR:  10.0.18362.1.amd64fre.19h1_release.190318-1202

ANALYSIS_SESSION_ELAPSED_TIME:  14de6

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:0xea_image_dxgkrnl.sys

FAILURE_ID_HASH:  {ea458ad2-d5ab-aa6c-7a11-54653c70dfb8}

Followup:     MachineOwner
---------
Yüklediğin saçma programlar dahili ekran kartı sürücüsünü sıkıştırıyor.

Kaldır;
HWMonitor, AMDRyzenMasterDriver, MSI Afterburner, Asus yazılımları.

Dahili ekran kartı sürücüsünü DDU ile temizleyip tekrar yükle.
Kod:
THREAD_STUCK_IN_DEVICE_DRIVER_M (100000ea)
The device driver is spinning in an infinite loop, most likely waiting for
hardware to become idle. This usually indicates problem with the hardware
itself or with the device driver programming the hardware incorrectly.
If the kernel debugger is connected and running when watchdog detects a
timeout condition then DbgBreakPoint() will be called instead of KeBugCheckEx()
and detailed message including bugcheck arguments will be printed to the
debugger. This way we can identify an offending thread, set breakpoints in it,
and hit go to return to the spinning code to debug it further. Because
KeBugCheckEx() is not called the .bugcheck directive will not return bugcheck
information in this case. The arguments are already printed out to the kernel
debugger. You can also retrieve them from a global variable via
"dd watchdog!g_WdBugCheckData l5" (use dq on NT64).
On MP machines it is possible to hit a timeout when the spinning thread is
interrupted by hardware interrupt and ISR or DPC routine is running at the time
of the bugcheck (this is because the timeout's work item can be delivered and
handled on the second CPU and the same time). If this is the case you will have
to look deeper at the offending thread's stack (e.g. using dds) to determine
spinning code which caused the timeout to occur.
Arguments:
Arg1: ffffd004f0fc2080, Pointer to a stuck thread object.  Do .thread then kb on it to find
    the hung location.
Arg2: 0000000000000000, Pointer to a DEFERRED_WATCHDOG object.
Arg3: 0000000000000000, Pointer to offending driver name.
Arg4: 0000000000000000, Number of times "intercepted" bugcheck 0xEA was hit (see notes).

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for atikmdag.sys

KEY_VALUES_STRING: 1


PROCESSES_ANALYSIS: 1

SERVICE_ANALYSIS: 1

STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1


DUMP_CLASS: 1

DUMP_QUALIFIER: 400

BUILD_VERSION_STRING:  18362.1.amd64fre.19h1_release.190318-1202

SYSTEM_MANUFACTURER:  ASUSTeK COMPUTER INC.

SYSTEM_PRODUCT_NAME:  TUF Gaming FX505DD_FX505DD

SYSTEM_VERSION:  1.0

BIOS_VENDOR:  American Megatrends Inc.

BIOS_VERSION:  FX505DD.306

BIOS_DATE:  07/12/2019

BASEBOARD_MANUFACTURER:  ASUSTeK COMPUTER INC.

BASEBOARD_PRODUCT:  FX505DD

BASEBOARD_VERSION:  1.0

DUMP_TYPE:  2

BUGCHECK_P1: ffffd004f0fc2080

BUGCHECK_P2: 0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

FAULTING_THREAD:  ffffd004f0fc2080

DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_FAULT

CPU_COUNT: 8

CPU_MHZ: 830

CPU_VENDOR:  AuthenticAMD

CPU_FAMILY: 17

CPU_MODEL: 18

CPU_STEPPING: 1

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

BUGCHECK_STR:  0xEA

PROCESS_NAME:  MSIAfterburner.exe

CURRENT_IRQL:  0

ANALYSIS_SESSION_HOST:  DESKTOP-18V31A3

ANALYSIS_SESSION_TIME:  01-24-2020 23:06:56.0984

ANALYSIS_VERSION: 10.0.18362.1 x86fre

LAST_CONTROL_TRANSFER:  from fffff8075f880db5 to fffff807515c14e0

STACK_TEXT:
ffffe68c`9a20ba88 fffff807`5f880db5 : 00000000`000000ea ffffd004`f0fc2080 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
ffffe68c`9a20ba90 fffff807`5f880e8e : ffffe68c`9a20bb70 fffff807`5f85beab ffffe68c`9a20bb70 fffff807`67433954 : dxgkrnl!TdrTimedOperationBugcheckOnTimeout+0x45
ffffe68c`9a20bb00 fffff807`6739db00 : 000000a1`e8b8b091 fffff807`67433954 00000000`00000000 ffffd004`de9ac000 : dxgkrnl!TdrTimedOperationDelay+0xce
ffffe68c`9a20bb40 000000a1`e8b8b091 : fffff807`67433954 00000000`00000000 ffffd004`de9ac000 00000000`00989680 : atikmdag+0x6db00
ffffe68c`9a20bb48 fffff807`67433954 : 00000000`00000000 ffffd004`de9ac000 00000000`00989680 00000000`00000001 : 0x000000a1`e8b8b091
ffffe68c`9a20bb50 00000000`00000000 : ffffd004`de9ac000 00000000`00989680 00000000`00000001 00000000`00000028 : atikmdag+0x103954


STACK_COMMAND:  .thread 0xffffd004f0fc2080 ; kb

THREAD_SHA1_HASH_MOD_FUNC:  72fdf9c2701b15ee3875c8d84432bb6f4f878992

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  8733c7833060fb02ce8c6a0258e1674615927de1

THREAD_SHA1_HASH_MOD:  7711aec31f9092c0b1e7c4bf053e92961bf05370

FOLLOWUP_IP:
dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45
fffff807`5f880db5 cc              int     3

FAULT_INSTR_CODE:  cccccccc

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgkrnl

IMAGE_NAME:  dxgkrnl.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  0

IMAGE_VERSION:  10.0.18362.449

FAILURE_BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

PRIMARY_PROBLEM_CLASS:  0xEA_IMAGE_dxgkrnl.sys

TARGET_TIME:  2020-01-24T18:55:29.000Z

OSBUILD:  18362

OSSERVICEPACK:  592

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

SUITE_MASK:  272

PRODUCT_TYPE:  1

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

OSEDITION:  Windows 10 WinNt TerminalServer SingleUserTS

OS_LOCALE:

USER_LCID:  0

OSBUILD_TIMESTAMP:  1972-08-22 03:24:00

BUILDDATESTAMP_STR:  190318-1202

BUILDLAB_STR:  19h1_release

BUILDOSVER_STR:  10.0.18362.1.amd64fre.19h1_release.190318-1202

ANALYSIS_SESSION_ELAPSED_TIME:  1383c

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:0xea_image_dxgkrnl.sys

FAILURE_ID_HASH:  {ea458ad2-d5ab-aa6c-7a11-54653c70dfb8}

Followup:     MachineOwner
---------

THREAD_STUCK_IN_DEVICE_DRIVER_M (100000ea)
The device driver is spinning in an infinite loop, most likely waiting for
hardware to become idle. This usually indicates problem with the hardware
itself or with the device driver programming the hardware incorrectly.
If the kernel debugger is connected and running when watchdog detects a
timeout condition then DbgBreakPoint() will be called instead of KeBugCheckEx()
and detailed message including bugcheck arguments will be printed to the
debugger. This way we can identify an offending thread, set breakpoints in it,
and hit go to return to the spinning code to debug it further. Because
KeBugCheckEx() is not called the .bugcheck directive will not return bugcheck
information in this case. The arguments are already printed out to the kernel
debugger. You can also retrieve them from a global variable via
"dd watchdog!g_WdBugCheckData l5" (use dq on NT64).
On MP machines it is possible to hit a timeout when the spinning thread is
interrupted by hardware interrupt and ISR or DPC routine is running at the time
of the bugcheck (this is because the timeout's work item can be delivered and
handled on the second CPU and the same time). If this is the case you will have
to look deeper at the offending thread's stack (e.g. using dds) to determine
spinning code which caused the timeout to occur.
Arguments:
Arg1: ffff8a8a204d30c0, Pointer to a stuck thread object.  Do .thread then kb on it to find
    the hung location.
Arg2: 0000000000000000, Pointer to a DEFERRED_WATCHDOG object.
Arg3: 0000000000000000, Pointer to offending driver name.
Arg4: 0000000000000000, Number of times "intercepted" bugcheck 0xEA was hit (see notes).

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for atikmdag.sys

KEY_VALUES_STRING: 1


PROCESSES_ANALYSIS: 1

SERVICE_ANALYSIS: 1

STACKHASH_ANALYSIS: 1

TIMELINE_ANALYSIS: 1


DUMP_CLASS: 1

DUMP_QUALIFIER: 400

BUILD_VERSION_STRING:  18362.1.amd64fre.19h1_release.190318-1202

DUMP_TYPE:  2

BUGCHECK_P1: ffff8a8a204d30c0

BUGCHECK_P2: 0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

FAULTING_THREAD:  ffff8a8a204d30c0

DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_FAULT

CPU_COUNT: 8

CPU_MHZ: 830

CPU_VENDOR:  AuthenticAMD

CPU_FAMILY: 17

CPU_MODEL: 18

CPU_STEPPING: 1

CUSTOMER_CRASH_COUNT:  1

BUGCHECK_STR:  0xEA

PROCESS_NAME:  HWMonitor.exe

CURRENT_IRQL:  0

ANALYSIS_SESSION_HOST:  DESKTOP-18V31A3

ANALYSIS_SESSION_TIME:  01-24-2020 23:06:58.0756

ANALYSIS_VERSION: 10.0.18362.1 x86fre

LAST_CONTROL_TRANSFER:  from fffff80411460db5 to fffff80403dc14e0

STACK_TEXT:
fffff001`38821ab8 fffff804`11460db5 : 00000000`000000ea ffff8a8a`204d30c0 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff001`38821ac0 fffff804`11460e8e : fffff001`38821ba0 fffff804`1143beab fffff001`38821ba0 fffff804`19d03954 : dxgkrnl!TdrTimedOperationBugcheckOnTimeout+0x45
fffff001`38821b30 fffff804`19c6db00 : 00000079`6b73630d fffff804`19d03954 00000000`00000000 ffff8a8a`15a6e000 : dxgkrnl!TdrTimedOperationDelay+0xce
fffff001`38821b70 00000079`6b73630d : fffff804`19d03954 00000000`00000000 ffff8a8a`15a6e000 00000000`00989680 : atikmdag+0x6db00
fffff001`38821b78 fffff804`19d03954 : 00000000`00000000 ffff8a8a`15a6e000 00000000`00989680 00000000`00000001 : 0x00000079`6b73630d
fffff001`38821b80 00000000`00000000 : ffff8a8a`15a6e000 00000000`00989680 00000000`00000001 00000000`00000028 : atikmdag+0x103954


STACK_COMMAND:  .thread 0xffff8a8a204d30c0 ; kb

THREAD_SHA1_HASH_MOD_FUNC:  72fdf9c2701b15ee3875c8d84432bb6f4f878992

THREAD_SHA1_HASH_MOD_FUNC_OFFSET:  8733c7833060fb02ce8c6a0258e1674615927de1

THREAD_SHA1_HASH_MOD:  7711aec31f9092c0b1e7c4bf053e92961bf05370

FOLLOWUP_IP:
dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45
fffff804`11460db5 cc              int     3

FAULT_INSTR_CODE:  cccccccc

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgkrnl

IMAGE_NAME:  dxgkrnl.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  0

IMAGE_VERSION:  10.0.18362.449

FAILURE_BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

PRIMARY_PROBLEM_CLASS:  0xEA_IMAGE_dxgkrnl.sys

TARGET_TIME:  2020-01-22T10:00:31.000Z

OSBUILD:  18362

OSSERVICEPACK:  592

SERVICEPACK_NUMBER: 0

OS_REVISION: 0

SUITE_MASK:  272

PRODUCT_TYPE:  1

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

OSEDITION:  Windows 10 WinNt TerminalServer SingleUserTS

OS_LOCALE:

USER_LCID:  0

OSBUILD_TIMESTAMP:  1972-08-22 03:24:00

BUILDDATESTAMP_STR:  190318-1202

BUILDLAB_STR:  19h1_release

BUILDOSVER_STR:  10.0.18362.1.amd64fre.19h1_release.190318-1202

ANALYSIS_SESSION_ELAPSED_TIME:  14de6

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:0xea_image_dxgkrnl.sys

FAILURE_ID_HASH:  {ea458ad2-d5ab-aa6c-7a11-54653c70dfb8}

Followup:     MachineOwner
---------
 
Çözüm
Öncelikle bu tarz sistemleri pek önermem. Gelelim hatalara.
BIOS güncelle ve sonrasında optimize defaults yapın.
GPU sürücülerini güncelleyin. AMD'nin GPU hariç diğer yazılımlarını silin. Fan kontrol tarzı bir araç varsa kaldır o tarz araçlar kullanma.
Fan kontrol ASUS'un kendi programı var. Oda mı sıkıntı kaldıralım mı? İlk gün oyun oynarken 85 - 90'ları gördü sıcaklık internet sorunum var güncellemeleri hemen yapamadım. Güncellemelerden sonra 75 civarlarında dolaşmaya başladı. Sıcaklığı takip etmek için indirdim diğerlerini de. Daha önce de kullandığım programlar yani hiç sorun yaşamamıştım.
AMDRyzenMasterDriver kurduğumu hatırlamıyorum. Driverleri kurarken kurdum herhalde onu nasıl kaldırırım? Bulamadım.
 
İsmini kopyalarken öyle yazmışım, o program sürücü değil Tweak yazılımı, kaldırın tam adı şöyle "AMD Ryzen Master Utility".

Dediğim programları ve adımları uyguladıktan sonra tekrar hata alırsan paylaş.
 
Son düzenleme:
Fan kontrol ASUS'un kendi programı var. Oda mı sıkıntı kaldıralım mı? İlk gün oyun oynarken 85 - 90'ları gördü sıcaklık internet sorunum var güncellemeleri hemen yapamadım. Güncellemelerden sonra 75 civarlarında dolaşmaya başladı. Sıcaklığı takip etmek için indirdim diğerlerini de. Daha önce de kullandığım programlar yani hiç sorun yaşamamıştım.
AMDRyzenMasterDriver kurduğumu hatırlamıyorum. Driverleri kurarken kurdum herhalde onu nasıl kaldırırım? Bulamadım.
Geçici olarak kaldıracaksınız zaten. 90 derece yüksek kabul edilebilir.
 
Durum
Mesaj gönderimine kapalı.

Bu konuyu görüntüleyen kullanıcılar

Technopat Haberler

Geri
Yukarı