Dual boot kullanıyorum, windows sağlam, BIOSdan giriliyor rahat rahat.
Grub ayarlarım:
Kod:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Dual boot kullanıyorum, windows sağlam, BIOSdan giriliyor rahat rahat.
Grub ayarlarım:
Kod:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Dual boot kullanıyorum, windows sağlam, BIOSdan giriliyor rahat rahat.
Grub ayarlarım:
Kod:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
bugra@bugra-Aspire-A315-58:~$ sudo grub-mkconfig -o /boot/grub/grub.cfg
[sudo] bugra için parola:
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.19.0-35-generic
Found initrd image: /boot/initrd.img-5.19.0-35-generic
Found linux image: /boot/vmlinuz-5.19.0-21-generic
Found initrd image: /boot/initrd.img-5.19.0-21-generic
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
bugra@bugra-Aspire-A315-58:~$ sudo update-grub
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.19.0-35-generic
Found initrd image: /boot/initrd.img-5.19.0-35-generic
Found linux image: /boot/vmlinuz-5.19.0-21-generic
Found initrd image: /boot/initrd.img-5.19.0-21-generic
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
Reboot atıp geliyorum.
Reboot attım olmadı, os proberın açık olup olmadığını bilmediğim için grub.cfg dosyama [GRUB_DISABLE_OS_PROBER=false
Satırını da ekledim, araştırmaya devam
Eğer yeterince çileden çıkarsam easybcd ile grub yerine Win Boot Managerdan boot edeceğim.
Not: O satırı ekleyince çalışmadı yazmayı unuttum.
Yeni deneme, sudo os-prober'ı disk içinde çalıştırmak:
Kod:
bugra@bugra-Aspire-A315-58:/media/bugra/C4F63EF9F63EEAF6$ sudo os-prober
[sudo] bugra için parola:
bugra@bugra-Aspire-A315-58:/media/bugra/C4F63EF9F63EEAF6$ sudo update-grub
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.19.0-35-generic
Found initrd image: /boot/initrd.img-5.19.0-35-generic
Found linux image: /boot/vmlinuz-5.19.0-21-generic
Found initrd image: /boot/initrd.img-5.19.0-21-generic
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
Adding boot menu entry for UEFI Firmware Settings ...
done
/etc/grub.d/40_custom içine custom entry girmeye çalışıyorum, Grubu uçurmazsam reboot sonrası görüşürüz.
@Shaw Dickerson hocam sorunu sonunda çözdüm.
OS-Prober görmeyi beceremedi. Açıp kapatmayı denedim.
EasyBCD ben EFI sevmiyorum dedi onla da yapamadık.
Yapmam gereken direkt gruba custom entry girmekmiş.
Windows 11 için bende bu çalıştı, Windows 10 için olan bir yazıdan kopyaladım gerçi ama.
bugra@bugra-Aspire-A315-58:~$ sudo grub-mkconfig -o /boot/grub/grub.cfg
[sudo] bugra için parola:
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.19.0-35-generic
Found initrd image: /boot/initrd.img-5.19.0-35-generic
Found linux image: /boot/vmlinuz-5.19.0-21-generic
Found initrd image: /boot/initrd.img-5.19.0-21-generic
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
bugra@bugra-Aspire-A315-58:~$ sudo update-grub
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.19.0-35-generic
Found initrd image: /boot/initrd.img-5.19.0-35-generic
Found linux image: /boot/vmlinuz-5.19.0-21-generic
Found initrd image: /boot/initrd.img-5.19.0-21-generic
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
Reboot atıp geliyorum.
Reboot attım olmadı, os proberın açık olup olmadığını bilmediğim için grub.cfg dosyama [GRUB_DISABLE_OS_PROBER=false
Satırını da ekledim, araştırmaya devam
Eğer yeterince çileden çıkarsam easybcd ile grub yerine Win Boot Managerdan boot edeceğim.
Not: O satırı ekleyince çalışmadı yazmayı unuttum.
Yeni deneme, sudo os-prober'ı disk içinde çalıştırmak:
Kod:
bugra@bugra-Aspire-A315-58:/media/bugra/C4F63EF9F63EEAF6$ sudo os-prober
[sudo] bugra için parola:
bugra@bugra-Aspire-A315-58:/media/bugra/C4F63EF9F63EEAF6$ sudo update-grub
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.19.0-35-generic
Found initrd image: /boot/initrd.img-5.19.0-35-generic
Found linux image: /boot/vmlinuz-5.19.0-21-generic
Found initrd image: /boot/initrd.img-5.19.0-21-generic
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
Adding boot menu entry for UEFI Firmware Settings ...
done
/etc/grub.d/40_custom içine custom entry girmeye çalışıyorum, Grubu uçurmazsam reboot sonrası görüşürüz.
@Shaw Dickerson hocam sorunu sonunda çözdüm.
OS-Prober görmeyi beceremedi. Açıp kapatmayı denedim.
EasyBCD ben EFI sevmiyorum dedi onla da yapamadık.
Yapmam gereken direkt gruba custom entry girmekmiş.
Windows 11 için bende bu çalıştı, Windows 10 için olan bir yazıdan kopyaladım gerçi ama.