Çözüldü VGK.sys mavi ekran hatası

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.

yujirox

Hectopat
Katılım
27 Kasım 2020
Mesajlar
157
Çözümler
1
Yer
İstanbul
Daha fazla  
Cinsiyet
Erkek
Bu konuda bilgili olan birisi yardımcı olabilir mi?

Dosyalar.


Kod:
Machine ID Information [From Smbios 2.7, DMIVersion 0, Size=2736]
BiosMajorRelease = 4
BiosMinorRelease = 6
BiosVendor = American Megatrends Inc.
BiosVersion = 4.6.5
BiosReleaseDate = 12/17/2012
SystemManufacturer = EXPER
SystemProductName = ACTION
SystemFamily = DESKTOP
SystemVersion = UE-16089
SystemSKU = dc1-h38
BaseBoardManufacturer = EXPER
BaseBoardProduct = H61H2-MV
BaseBoardVersion = 2.0
 
Son düzenleyen: Moderatör:
Çözüm
Birkaç tavsiyem olarak. Aşağıdaki adımları uyguladıktan sonra bir süre gözlemleyin. Eğer tekrar hata alırsanız güncel minidump dosyası paylaşın tekrar inceleyelim.
Tüm bu adımları tamamladıktan sonra umarım sorununuz çözülür.

Kod:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error.
source that reported the error. Parameter 2 holds the address of the.
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception.
Arg2: ffffbb85335e3028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000081000402, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 4296.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 9871.

 Key : Analysis.Init.CPU.mSec
 Value: 718.

 Key : Analysis.Init.Elapsed.mSec
 Value: 9800.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 76.

FILE_IN_CAB: 122721-108437-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: 124.

BUGCHECK_P1: 0

BUGCHECK_P2: ffffbb85335e3028.

BUGCHECK_P3: b2000000.

BUGCHECK_P4: 81000402.

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXPNP: 1 (!blackboxpnp)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: opera.exe

STACK_TEXT:
ffffd080`cff4d8e8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx

MODULE_NAME: GenuineIntel.

IMAGE_NAME: GenuineIntel.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

FAILURE_BUCKET_ID: 0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup: MachineOwner

Kod:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an.
interrupt request level (IRQL) that is too high. This is usually.
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff801832eee9c, memory referenced.
Arg2: 0000000000000002, IRQL.
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation.
Arg4: fffff801832eee9c, address which referenced memory.

Debugging Details:
------------------

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 3421.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 5592.

 Key : Analysis.Init.CPU.mSec
 Value: 780.

 Key : Analysis.Init.Elapsed.mSec
 Value: 23006.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 75.

FILE_IN_CAB: 102821-64734-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: d1.

BUGCHECK_P1: fffff801832eee9c.

BUGCHECK_P2: 2

BUGCHECK_P3: 8

BUGCHECK_P4: fffff801832eee9c.

READ_ADDRESS: fffff801760fa390: Unable to get MiVisibleState.
Unable to get NonPagedPoolStart.
Unable to get NonPagedPoolEnd.
Unable to get PagedPoolStart.
Unable to get PagedPoolEnd.
unable to get nt!MmSpecialPagesInUse
 fffff801832eee9c.

IP_MODULE_UNLOADED:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: System.

TRAP_FRAME: ffffa00174c28880 -- (.trap 0xffffa00174c28880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80189764be0 rbx=0000000000000000 rcx=ffff840b16c85970
rdx=ffff840b16c88c00 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801832eee9c rsp=ffffa00174c28a18 rbp=ffff840b16c88c18
 r8=ffff840b16c88c18 r9=ffffa00174c28b34 r10=ffff840b16c8dd30
r11=ffffbe7f38200000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc.
<Unloaded_vgk.sys>+0x4ee9c:
fffff801`832eee9c ?? ???
Resetting default scope.

FAILED_INSTRUCTION_ADDRESS:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

STACK_TEXT:
ffffa001`74c28738 fffff801`75809169 : 00000000`0000000a fffff801`832eee9c 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffffa001`74c28740 fffff801`75805469 : 00000000`00000021 00000000`00000000 ffff840b`16c55b00 fffff801`795abbbe : nt!KiBugCheckDispatch+0x69
ffffa001`74c28880 fffff801`832eee9c : fffff801`89742129 ffff840b`16b4a002 00000000`00000001 fffff801`89727008 : nt!KiPageFault+0x469
ffffa001`74c28a18 fffff801`89742129 : ffff840b`16b4a002 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c : <Unloaded_vgk.sys>+0x4ee9c
ffffa001`74c28a20 ffff840b`16b4a002 : 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 : rawaccel+0x2129
ffffa001`74c28a28 00000000`00000001 : fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 : 0xffff840b`16b4a002
ffffa001`74c28a30 fffff801`89727008 : ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 00000000`00000000 : 0x1.
ffffa001`74c28a38 ffff840b`16c88c0c : 00000000`00000000 fffff801`7568f855 00000000`00000000 00000000`00000000 : mouhid!WPP_RECORDER_INITIALIZED
ffffa001`74c28a40 00000000`00000000 : fffff801`7568f855 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff840b`16c88c0c

SYMBOL_NAME: vgk.sys+4ee9c

MODULE_NAME: vgk.

IMAGE_NAME: vgk.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

BUCKET_ID_FUNC_OFFSET: 4ee9c.

FAILURE_BUCKET_ID: AV_CODE_AV_UNLOADED_IP_vgk.sys!unknown_function

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {58ddf758-2c33-45f8-8744-8e36d684565c}

Followup: MachineOwner

Kod:
Unloaded modules:
fffff803`4a0e0000 fffff803`4a122000 klids.sys
fffff803`2c670000 fffff803`2c6b2000 klids.sys
fffff803`2d120000 fffff803`2d13b000 klmouflt.sys
fffff803`2d0e0000 fffff803`2d0f1000 mouhid.sys
fffff803`2c990000 fffff803`2c9cf000 AtihdWT6.sys
fffff803`2aea0000 fffff803`2aeaf000 dump_storpor.
fffff803`2b400000 fffff803`2b6b7000 dump_iaStorA.
fffff803`2b6e0000 fffff803`2b6fe000 dump_dumpfve.
fffff803`2d1c0000 fffff803`2d1dd000 EhStorClass.
fffff803`2d1a0000 fffff803`2d1bd000 EhStorClass.
fffff803`2d180000 fffff803`2d19d000 EhStorClass.
fffff803`237b0000 fffff803`237cd000 EhStorClass.
fffff803`2c710000 fffff803`2c72c000 dam.sys
fffff803`2b700000 fffff803`2bf0a000 vgk.sys
fffff803`23000000 fffff803`2300f000 klelam.sys
fffff803`24360000 fffff803`24371000 hwpolicy.sys

Vanguard kaldırdım sorun çözüldü.
Birkaç tavsiyem olarak. Aşağıdaki adımları uyguladıktan sonra bir süre gözlemleyin. Eğer tekrar hata alırsanız güncel minidump dosyası paylaşın tekrar inceleyelim.
Tüm bu adımları tamamladıktan sonra umarım sorununuz çözülür.

Kod:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error.
source that reported the error. Parameter 2 holds the address of the.
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception.
Arg2: ffffbb85335e3028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000081000402, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 4296.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 9871.

 Key : Analysis.Init.CPU.mSec
 Value: 718.

 Key : Analysis.Init.Elapsed.mSec
 Value: 9800.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 76.

FILE_IN_CAB: 122721-108437-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: 124.

BUGCHECK_P1: 0

BUGCHECK_P2: ffffbb85335e3028.

BUGCHECK_P3: b2000000.

BUGCHECK_P4: 81000402.

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXPNP: 1 (!blackboxpnp)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: opera.exe

STACK_TEXT:
ffffd080`cff4d8e8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx

MODULE_NAME: GenuineIntel.

IMAGE_NAME: GenuineIntel.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

FAILURE_BUCKET_ID: 0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup: MachineOwner

Kod:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an.
interrupt request level (IRQL) that is too high. This is usually.
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff801832eee9c, memory referenced.
Arg2: 0000000000000002, IRQL.
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation.
Arg4: fffff801832eee9c, address which referenced memory.

Debugging Details:
------------------

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 3421.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 5592.

 Key : Analysis.Init.CPU.mSec
 Value: 780.

 Key : Analysis.Init.Elapsed.mSec
 Value: 23006.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 75.

FILE_IN_CAB: 102821-64734-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: d1.

BUGCHECK_P1: fffff801832eee9c.

BUGCHECK_P2: 2

BUGCHECK_P3: 8

BUGCHECK_P4: fffff801832eee9c.

READ_ADDRESS: fffff801760fa390: Unable to get MiVisibleState.
Unable to get NonPagedPoolStart.
Unable to get NonPagedPoolEnd.
Unable to get PagedPoolStart.
Unable to get PagedPoolEnd.
unable to get nt!MmSpecialPagesInUse
 fffff801832eee9c.

IP_MODULE_UNLOADED:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: System.

TRAP_FRAME: ffffa00174c28880 -- (.trap 0xffffa00174c28880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80189764be0 rbx=0000000000000000 rcx=ffff840b16c85970
rdx=ffff840b16c88c00 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801832eee9c rsp=ffffa00174c28a18 rbp=ffff840b16c88c18
 r8=ffff840b16c88c18 r9=ffffa00174c28b34 r10=ffff840b16c8dd30
r11=ffffbe7f38200000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc.
<Unloaded_vgk.sys>+0x4ee9c:
fffff801`832eee9c ?? ???
Resetting default scope.

FAILED_INSTRUCTION_ADDRESS:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

STACK_TEXT:
ffffa001`74c28738 fffff801`75809169 : 00000000`0000000a fffff801`832eee9c 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffffa001`74c28740 fffff801`75805469 : 00000000`00000021 00000000`00000000 ffff840b`16c55b00 fffff801`795abbbe : nt!KiBugCheckDispatch+0x69
ffffa001`74c28880 fffff801`832eee9c : fffff801`89742129 ffff840b`16b4a002 00000000`00000001 fffff801`89727008 : nt!KiPageFault+0x469
ffffa001`74c28a18 fffff801`89742129 : ffff840b`16b4a002 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c : <Unloaded_vgk.sys>+0x4ee9c
ffffa001`74c28a20 ffff840b`16b4a002 : 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 : rawaccel+0x2129
ffffa001`74c28a28 00000000`00000001 : fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 : 0xffff840b`16b4a002
ffffa001`74c28a30 fffff801`89727008 : ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 00000000`00000000 : 0x1.
ffffa001`74c28a38 ffff840b`16c88c0c : 00000000`00000000 fffff801`7568f855 00000000`00000000 00000000`00000000 : mouhid!WPP_RECORDER_INITIALIZED
ffffa001`74c28a40 00000000`00000000 : fffff801`7568f855 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff840b`16c88c0c

SYMBOL_NAME: vgk.sys+4ee9c

MODULE_NAME: vgk.

IMAGE_NAME: vgk.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

BUCKET_ID_FUNC_OFFSET: 4ee9c.

FAILURE_BUCKET_ID: AV_CODE_AV_UNLOADED_IP_vgk.sys!unknown_function

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {58ddf758-2c33-45f8-8744-8e36d684565c}

Followup: MachineOwner

Kod:
Unloaded modules:
fffff803`4a0e0000 fffff803`4a122000 klids.sys
fffff803`2c670000 fffff803`2c6b2000 klids.sys
fffff803`2d120000 fffff803`2d13b000 klmouflt.sys
fffff803`2d0e0000 fffff803`2d0f1000 mouhid.sys
fffff803`2c990000 fffff803`2c9cf000 AtihdWT6.sys
fffff803`2aea0000 fffff803`2aeaf000 dump_storpor.
fffff803`2b400000 fffff803`2b6b7000 dump_iaStorA.
fffff803`2b6e0000 fffff803`2b6fe000 dump_dumpfve.
fffff803`2d1c0000 fffff803`2d1dd000 EhStorClass.
fffff803`2d1a0000 fffff803`2d1bd000 EhStorClass.
fffff803`2d180000 fffff803`2d19d000 EhStorClass.
fffff803`237b0000 fffff803`237cd000 EhStorClass.
fffff803`2c710000 fffff803`2c72c000 dam.sys
fffff803`2b700000 fffff803`2bf0a000 vgk.sys
fffff803`23000000 fffff803`2300f000 klelam.sys
fffff803`24360000 fffff803`24371000 hwpolicy.sys

Windows Update yapamıyorum. Çok değişik bir şekilde o sayfa bozuldu; ne yapabiliyorum ne de güncellemeleri duraklatabiliyorum, güncellemeyi yapmaya çalıştığımda hata kodu veriyor o sayfada.
Birkaç tavsiyem olarak. Aşağıdaki adımları uyguladıktan sonra bir süre gözlemleyin. Eğer tekrar hata alırsanız güncel minidump dosyası paylaşın tekrar inceleyelim.
Tüm bu adımları tamamladıktan sonra umarım sorununuz çözülür.

Kod:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffbb85335e3028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000081000402, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 4296

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 9871

    Key  : Analysis.Init.CPU.mSec
    Value: 718

    Key  : Analysis.Init.Elapsed.mSec
    Value: 9800

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 76


FILE_IN_CAB:  122721-108437-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8
  Kernel Generated Triage Dump

BUGCHECK_CODE:  124

BUGCHECK_P1: 0

BUGCHECK_P2: ffffbb85335e3028

BUGCHECK_P3: b2000000

BUGCHECK_P4: 81000402

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  opera.exe

STACK_TEXT:
ffffd080`cff4d8e8 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx


MODULE_NAME: GenuineIntel

IMAGE_NAME:  GenuineIntel.sys

STACK_COMMAND:  .cxr; .ecxr ; kb

FAILURE_BUCKET_ID:  0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup:     MachineOwner

Kod:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff801832eee9c, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: fffff801832eee9c, address which referenced memory

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 3421

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 5592

    Key  : Analysis.Init.CPU.mSec
    Value: 780

    Key  : Analysis.Init.Elapsed.mSec
    Value: 23006

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 75


FILE_IN_CAB:  102821-64734-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8
  Kernel Generated Triage Dump

BUGCHECK_CODE:  d1

BUGCHECK_P1: fffff801832eee9c

BUGCHECK_P2: 2

BUGCHECK_P3: 8

BUGCHECK_P4: fffff801832eee9c

READ_ADDRESS: fffff801760fa390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 fffff801832eee9c

IP_MODULE_UNLOADED:
vgk.sys+4ee9c
fffff801`832eee9c ??              ???

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

TRAP_FRAME:  ffffa00174c28880 -- (.trap 0xffffa00174c28880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80189764be0 rbx=0000000000000000 rcx=ffff840b16c85970
rdx=ffff840b16c88c00 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801832eee9c rsp=ffffa00174c28a18 rbp=ffff840b16c88c18
 r8=ffff840b16c88c18  r9=ffffa00174c28b34 r10=ffff840b16c8dd30
r11=ffffbe7f38200000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
<Unloaded_vgk.sys>+0x4ee9c:
fffff801`832eee9c ??              ???
Resetting default scope

FAILED_INSTRUCTION_ADDRESS:
vgk.sys+4ee9c
fffff801`832eee9c ??              ???

STACK_TEXT:
ffffa001`74c28738 fffff801`75809169     : 00000000`0000000a fffff801`832eee9c 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffffa001`74c28740 fffff801`75805469     : 00000000`00000021 00000000`00000000 ffff840b`16c55b00 fffff801`795abbbe : nt!KiBugCheckDispatch+0x69
ffffa001`74c28880 fffff801`832eee9c     : fffff801`89742129 ffff840b`16b4a002 00000000`00000001 fffff801`89727008 : nt!KiPageFault+0x469
ffffa001`74c28a18 fffff801`89742129     : ffff840b`16b4a002 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c : <Unloaded_vgk.sys>+0x4ee9c
ffffa001`74c28a20 ffff840b`16b4a002     : 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 : rawaccel+0x2129
ffffa001`74c28a28 00000000`00000001     : fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 : 0xffff840b`16b4a002
ffffa001`74c28a30 fffff801`89727008     : ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 00000000`00000000 : 0x1
ffffa001`74c28a38 ffff840b`16c88c0c     : 00000000`00000000 fffff801`7568f855 00000000`00000000 00000000`00000000 : mouhid!WPP_RECORDER_INITIALIZED
ffffa001`74c28a40 00000000`00000000     : fffff801`7568f855 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff840b`16c88c0c


SYMBOL_NAME:  vgk.sys+4ee9c

MODULE_NAME: vgk

IMAGE_NAME:  vgk.sys

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  4ee9c

FAILURE_BUCKET_ID:  AV_CODE_AV_UNLOADED_IP_vgk.sys!unknown_function

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {58ddf758-2c33-45f8-8744-8e36d684565c}

Followup:     MachineOwner

Kod:
Unloaded modules:
fffff803`4a0e0000 fffff803`4a122000   klids.sys
fffff803`2c670000 fffff803`2c6b2000   klids.sys
fffff803`2d120000 fffff803`2d13b000   klmouflt.sys
fffff803`2d0e0000 fffff803`2d0f1000   mouhid.sys
fffff803`2c990000 fffff803`2c9cf000   AtihdWT6.sys
fffff803`2aea0000 fffff803`2aeaf000   dump_storpor
fffff803`2b400000 fffff803`2b6b7000   dump_iaStorA
fffff803`2b6e0000 fffff803`2b6fe000   dump_dumpfve
fffff803`2d1c0000 fffff803`2d1dd000   EhStorClass.
fffff803`2d1a0000 fffff803`2d1bd000   EhStorClass.
fffff803`2d180000 fffff803`2d19d000   EhStorClass.
fffff803`237b0000 fffff803`237cd000   EhStorClass.
fffff803`2c710000 fffff803`2c72c000   dam.sys
fffff803`2b700000 fffff803`2bf0a000   vgk.sys
fffff803`23000000 fffff803`2300f000   klelam.sys
fffff803`24360000 fffff803`24371000   hwpolicy.sys
 
Birkaç tavsiyem olarak. Aşağıdaki adımları uyguladıktan sonra bir süre gözlemleyin. Eğer tekrar hata alırsanız güncel minidump dosyası paylaşın tekrar inceleyelim.
Tüm bu adımları tamamladıktan sonra umarım sorununuz çözülür.

Kod:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error.
source that reported the error. Parameter 2 holds the address of the.
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception.
Arg2: ffffbb85335e3028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000081000402, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 4296.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 9871.

 Key : Analysis.Init.CPU.mSec
 Value: 718.

 Key : Analysis.Init.Elapsed.mSec
 Value: 9800.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 76.

FILE_IN_CAB: 122721-108437-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: 124.

BUGCHECK_P1: 0

BUGCHECK_P2: ffffbb85335e3028.

BUGCHECK_P3: b2000000.

BUGCHECK_P4: 81000402.

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXPNP: 1 (!blackboxpnp)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: opera.exe

STACK_TEXT:
ffffd080`cff4d8e8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx

MODULE_NAME: GenuineIntel.

IMAGE_NAME: GenuineIntel.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

FAILURE_BUCKET_ID: 0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup: MachineOwner

Kod:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an.
interrupt request level (IRQL) that is too high. This is usually.
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff801832eee9c, memory referenced.
Arg2: 0000000000000002, IRQL.
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation.
Arg4: fffff801832eee9c, address which referenced memory.

Debugging Details:
------------------

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 3421.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 5592.

 Key : Analysis.Init.CPU.mSec
 Value: 780.

 Key : Analysis.Init.Elapsed.mSec
 Value: 23006.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 75.

FILE_IN_CAB: 102821-64734-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: d1.

BUGCHECK_P1: fffff801832eee9c.

BUGCHECK_P2: 2

BUGCHECK_P3: 8

BUGCHECK_P4: fffff801832eee9c.

READ_ADDRESS: fffff801760fa390: Unable to get MiVisibleState.
Unable to get NonPagedPoolStart.
Unable to get NonPagedPoolEnd.
Unable to get PagedPoolStart.
Unable to get PagedPoolEnd.
unable to get nt!MmSpecialPagesInUse
 fffff801832eee9c.

IP_MODULE_UNLOADED:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: System.

TRAP_FRAME: ffffa00174c28880 -- (.trap 0xffffa00174c28880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80189764be0 rbx=0000000000000000 rcx=ffff840b16c85970
rdx=ffff840b16c88c00 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801832eee9c rsp=ffffa00174c28a18 rbp=ffff840b16c88c18
 r8=ffff840b16c88c18 r9=ffffa00174c28b34 r10=ffff840b16c8dd30
r11=ffffbe7f38200000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc.
<Unloaded_vgk.sys>+0x4ee9c:
fffff801`832eee9c ?? ???
Resetting default scope.

FAILED_INSTRUCTION_ADDRESS:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

STACK_TEXT:
ffffa001`74c28738 fffff801`75809169 : 00000000`0000000a fffff801`832eee9c 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffffa001`74c28740 fffff801`75805469 : 00000000`00000021 00000000`00000000 ffff840b`16c55b00 fffff801`795abbbe : nt!KiBugCheckDispatch+0x69
ffffa001`74c28880 fffff801`832eee9c : fffff801`89742129 ffff840b`16b4a002 00000000`00000001 fffff801`89727008 : nt!KiPageFault+0x469
ffffa001`74c28a18 fffff801`89742129 : ffff840b`16b4a002 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c : <Unloaded_vgk.sys>+0x4ee9c
ffffa001`74c28a20 ffff840b`16b4a002 : 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 : rawaccel+0x2129
ffffa001`74c28a28 00000000`00000001 : fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 : 0xffff840b`16b4a002
ffffa001`74c28a30 fffff801`89727008 : ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 00000000`00000000 : 0x1.
ffffa001`74c28a38 ffff840b`16c88c0c : 00000000`00000000 fffff801`7568f855 00000000`00000000 00000000`00000000 : mouhid!WPP_RECORDER_INITIALIZED
ffffa001`74c28a40 00000000`00000000 : fffff801`7568f855 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff840b`16c88c0c

SYMBOL_NAME: vgk.sys+4ee9c

MODULE_NAME: vgk.

IMAGE_NAME: vgk.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

BUCKET_ID_FUNC_OFFSET: 4ee9c.

FAILURE_BUCKET_ID: AV_CODE_AV_UNLOADED_IP_vgk.sys!unknown_function

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {58ddf758-2c33-45f8-8744-8e36d684565c}

Followup: MachineOwner

Kod:
Unloaded modules:
fffff803`4a0e0000 fffff803`4a122000 klids.sys
fffff803`2c670000 fffff803`2c6b2000 klids.sys
fffff803`2d120000 fffff803`2d13b000 klmouflt.sys
fffff803`2d0e0000 fffff803`2d0f1000 mouhid.sys
fffff803`2c990000 fffff803`2c9cf000 AtihdWT6.sys
fffff803`2aea0000 fffff803`2aeaf000 dump_storpor.
fffff803`2b400000 fffff803`2b6b7000 dump_iaStorA.
fffff803`2b6e0000 fffff803`2b6fe000 dump_dumpfve.
fffff803`2d1c0000 fffff803`2d1dd000 EhStorClass.
fffff803`2d1a0000 fffff803`2d1bd000 EhStorClass.
fffff803`2d180000 fffff803`2d19d000 EhStorClass.
fffff803`237b0000 fffff803`237cd000 EhStorClass.
fffff803`2c710000 fffff803`2c72c000 dam.sys
fffff803`2b700000 fffff803`2bf0a000 vgk.sys
fffff803`23000000 fffff803`2300f000 klelam.sys
fffff803`24360000 fffff803`24371000 hwpolicy.sys

Vanguard kaldırdım sorun çözüldü.
Birkaç tavsiyem olarak. Aşağıdaki adımları uyguladıktan sonra bir süre gözlemleyin. Eğer tekrar hata alırsanız güncel minidump dosyası paylaşın tekrar inceleyelim.
Tüm bu adımları tamamladıktan sonra umarım sorununuz çözülür.

Kod:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error.
source that reported the error. Parameter 2 holds the address of the.
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000000, Machine Check Exception.
Arg2: ffffbb85335e3028, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000081000402, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION ***
*** ***
*************************************************************************

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 4296.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 9871.

 Key : Analysis.Init.CPU.mSec
 Value: 718.

 Key : Analysis.Init.Elapsed.mSec
 Value: 9800.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 76.

FILE_IN_CAB: 122721-108437-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: 124.

BUGCHECK_P1: 0

BUGCHECK_P2: ffffbb85335e3028.

BUGCHECK_P3: b2000000.

BUGCHECK_P4: 81000402.

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXPNP: 1 (!blackboxpnp)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: opera.exe

STACK_TEXT:
ffffd080`cff4d8e8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx

MODULE_NAME: GenuineIntel.

IMAGE_NAME: GenuineIntel.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

FAILURE_BUCKET_ID: 0x124_0_GenuineIntel_PROCESSOR__UNKNOWN_IMAGE_GenuineIntel.sys

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {5371cb52-c3d9-558e-47d4-d31c09567ca2}

Followup: MachineOwner

Kod:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an.
interrupt request level (IRQL) that is too high. This is usually.
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff801832eee9c, memory referenced.
Arg2: 0000000000000002, IRQL.
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation.
Arg4: fffff801832eee9c, address which referenced memory.

Debugging Details:
------------------

KEY_VALUES_STRING: 1

 Key : Analysis.CPU.mSec
 Value: 3421.

 Key : Analysis.DebugAnalysisManager
 Value: Create.

 Key : Analysis.Elapsed.mSec
 Value: 5592.

 Key : Analysis.Init.CPU.mSec
 Value: 780.

 Key : Analysis.Init.Elapsed.mSec
 Value: 23006.

 Key : Analysis.Memory.CommitPeak.Mb
 Value: 75.

FILE_IN_CAB: 102821-64734-01.dmp

DUMP_FILE_ATTRIBUTES: 0x8.
 Kernel Generated Triage Dump.

BUGCHECK_CODE: d1.

BUGCHECK_P1: fffff801832eee9c.

BUGCHECK_P2: 2

BUGCHECK_P3: 8

BUGCHECK_P4: fffff801832eee9c.

READ_ADDRESS: fffff801760fa390: Unable to get MiVisibleState.
Unable to get NonPagedPoolStart.
Unable to get NonPagedPoolEnd.
Unable to get PagedPoolStart.
Unable to get PagedPoolEnd.
unable to get nt!MmSpecialPagesInUse
 fffff801832eee9c.

IP_MODULE_UNLOADED:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: System.

TRAP_FRAME: ffffa00174c28880 -- (.trap 0xffffa00174c28880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80189764be0 rbx=0000000000000000 rcx=ffff840b16c85970
rdx=ffff840b16c88c00 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801832eee9c rsp=ffffa00174c28a18 rbp=ffff840b16c88c18
 r8=ffff840b16c88c18 r9=ffffa00174c28b34 r10=ffff840b16c8dd30
r11=ffffbe7f38200000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc.
<Unloaded_vgk.sys>+0x4ee9c:
fffff801`832eee9c ?? ???
Resetting default scope.

FAILED_INSTRUCTION_ADDRESS:
vgk.sys+4ee9c
fffff801`832eee9c ?? ???

STACK_TEXT:
ffffa001`74c28738 fffff801`75809169 : 00000000`0000000a fffff801`832eee9c 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffffa001`74c28740 fffff801`75805469 : 00000000`00000021 00000000`00000000 ffff840b`16c55b00 fffff801`795abbbe : nt!KiBugCheckDispatch+0x69
ffffa001`74c28880 fffff801`832eee9c : fffff801`89742129 ffff840b`16b4a002 00000000`00000001 fffff801`89727008 : nt!KiPageFault+0x469
ffffa001`74c28a18 fffff801`89742129 : ffff840b`16b4a002 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c : <Unloaded_vgk.sys>+0x4ee9c
ffffa001`74c28a20 ffff840b`16b4a002 : 00000000`00000001 fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 : rawaccel+0x2129
ffffa001`74c28a28 00000000`00000001 : fffff801`89727008 ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 : 0xffff840b`16b4a002
ffffa001`74c28a30 fffff801`89727008 : ffff840b`16c88c0c 00000000`00000000 fffff801`7568f855 00000000`00000000 : 0x1.
ffffa001`74c28a38 ffff840b`16c88c0c : 00000000`00000000 fffff801`7568f855 00000000`00000000 00000000`00000000 : mouhid!WPP_RECORDER_INITIALIZED
ffffa001`74c28a40 00000000`00000000 : fffff801`7568f855 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff840b`16c88c0c

SYMBOL_NAME: vgk.sys+4ee9c

MODULE_NAME: vgk.

IMAGE_NAME: vgk.sys

STACK_COMMAND: .cxr; .ecxr ; kb.

BUCKET_ID_FUNC_OFFSET: 4ee9c.

FAILURE_BUCKET_ID: AV_CODE_AV_UNLOADED_IP_vgk.sys!unknown_function

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {58ddf758-2c33-45f8-8744-8e36d684565c}

Followup: MachineOwner

Kod:
Unloaded modules:
fffff803`4a0e0000 fffff803`4a122000 klids.sys
fffff803`2c670000 fffff803`2c6b2000 klids.sys
fffff803`2d120000 fffff803`2d13b000 klmouflt.sys
fffff803`2d0e0000 fffff803`2d0f1000 mouhid.sys
fffff803`2c990000 fffff803`2c9cf000 AtihdWT6.sys
fffff803`2aea0000 fffff803`2aeaf000 dump_storpor.
fffff803`2b400000 fffff803`2b6b7000 dump_iaStorA.
fffff803`2b6e0000 fffff803`2b6fe000 dump_dumpfve.
fffff803`2d1c0000 fffff803`2d1dd000 EhStorClass.
fffff803`2d1a0000 fffff803`2d1bd000 EhStorClass.
fffff803`2d180000 fffff803`2d19d000 EhStorClass.
fffff803`237b0000 fffff803`237cd000 EhStorClass.
fffff803`2c710000 fffff803`2c72c000 dam.sys
fffff803`2b700000 fffff803`2bf0a000 vgk.sys
fffff803`23000000 fffff803`2300f000 klelam.sys
fffff803`24360000 fffff803`24371000 hwpolicy.sys

Windows Update yapamıyorum. Çok değişik bir şekilde o sayfa bozuldu; ne yapabiliyorum ne de güncellemeleri duraklatabiliyorum, güncellemeyi yapmaya çalıştığımda hata kodu veriyor o sayfada.
 
Çözüm
Windows Update yapamıyorum. Çok değişik bir şekilde o sayfa bozuldu; ne yapabiliyorum ne de güncellemeleri duraklatabiliyorum, güncellemeyi yapmaya çalıştığımda hata kodu veriyor o sayfada.
Aşağıdaki alıntıladığım yöntemi dener misiniz?

Windows güncelleştirmelerini indirirken ve yüklerken bir hata kodu alırsanız, Windows Update Sorun Gidericisi sorunun çözülmesine yardımcı olabilir.

Başlat > Ayarlar > Güncelleştirme ve Güvenlik > Sorun Giderme > Ek sorun gidericiler’i seçin. Sonra, Çalışır duruma getir altında Windows Update > Sorun gidericiyi çalıştır’ı seçin.

Sorun gidericinin çalışması bittiğinde, cihazınızı yeniden başlatmak iyi bir fikir olabilir.

Ardından yeni güncelleştirme olup olmadığını denetleyin. Başlat > Ayarlar > Güncelleştirme ve Güvenlik > Windows Update > Güncelleştirmeleri denetle’yi seçin ve ardından mevcut güncelleştirmeleri yükleyin.
 

Geri
Yukarı