Abdullah Çelik
Hectopat
- Katılım
- 25 Kasım 2012
- Mesajlar
- 74
- Çözümler
- 1
Daha fazla
- Meslek
- Öğrenci
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0xfffff2800f9f0035, 0x0000000000000002, 0x0000000000000001,
0xfffff8000bb3dc52)
*** ntoskrnl.exe - Address 0xfffff8000bb02340 base at 0xfffff8000ba87000 DateStamp
0x50ab0e64
*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80051a6038, 0x0000000000000000,
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff8015d333451 base at 0xfffff8015ce09000 DateStamp
0x50ab0e64
*** STOP: 0x00000050 (0xfffff87fcc59a960, 0x0000000000000000, 0xfffff88003848c03,
0x0000000000000002)
*** ntoskrnl.exe - Address 0xfffff802e56f1340 base at 0xfffff802e5676000 DateStamp
0x50ab0e64
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: hal.dll
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80051e3038, 0x00000000b2000040,
0x0000000000000800)
*** hal.dll - Address 0xfffff800df57d965 base at 0xfffff800df550000 DateStamp
0x505ab373
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff8009b727084, 0xfffff880077efe80,
0x0000000000000000)
*** hal.dll - Address 0xfffff8009b619325 base at 0xfffff8009b602000 DateStamp
0x505ab373
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
MEMORY_MANAGEMENT
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001a (0x0000000000041287, 0x0000000000000000, 0x0000000000000000,
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff801cc8f0d40 base at 0xfffff801cc876000 DateStamp
0x5063f8c8
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff80113ca7caa, 0xfffff88007a59870,
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff80113c7dd40 base at 0xfffff80113c03000 DateStamp
0x5063f8c8
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000050 (0xfffff87fcc778960, 0x0000000000000000, 0xfffff88003223c03,
0x0000000000000002)
*** ntoskrnl.exe - Address 0xfffff802b52e6d40 base at 0xfffff802b526c000 DateStamp
0x5063f8c8
*** STOP: 0x00000101 (0x0000000000000061, 0x0000000000000000, 0xfffff880009bf180,
0x0000000000000001)
*** hal.dll - Address 0xfffff801253a050c base at 0xfffff80125354000 DateStamp
0x505ab373
*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80051d7038, 0x00000000b2000000,
0x0000000000000014)
*** hal.dll - Address 0xfffff803e677e965 base at 0xfffff803e6751000 DateStamp
0x505ab373
*** STOP: 0x00000101 (0x0000000000000061, 0x0000000000000000, 0xfffff880009bf180,
0x0000000000000001)
*** hal.dll - Address 0xfffff802dec6b50c base at 0xfffff802dec1f000 DateStamp
0x505ab373
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000050 (0xfffff87fcc96a960, 0x0000000000000000, 0xfffff880037afc03,
0x0000000000000002)
*** ntoskrnl.exe - Address 0xfffff80055ef6d40 base at 0xfffff80055e7c000 DateStamp
0x5063f8c8
*** STOP: 0x00000050 (0xfffff87fcc77b960, 0x0000000000000000, 0xfffff88003823c03,
0x0000000000000002)
*** ntoskrnl.exe - Address 0xfffff80123e96d40 base at 0xfffff80123e1c000 DateStamp
0x5063f8c8
*** STOP: 0x00000050 (0xfffff87fccb63960, 0x0000000000000000, 0xfffff880039b2c03,
0x0000000000000002)
*** ntoskrnl.exe - Address 0xfffff8004768ad40 base at 0xfffff80047610000 DateStamp
0x5063f8c8
*** STOP: 0x00000101 (0x0000000000000061, 0x0000000000000000, 0xfffff880009bf180,
0x0000000000000001)
*** WDFLDR.SYS - Address 0xfffff88005d73160 base at 0xfffff8800118c000 DateStamp
0x5010ab70
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: wfplwfs.sys
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff801812b3042, 0x0000000000000000,
0xffffffffffffffff)
*** wfplwfs.sys - Address 0xfffff88001d206c0 base at 0xfffff88001d1f000 DateStamp
0x5010aa3e
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file:
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0xfffff281b29de035, 0x0000000000000002, 0x0000000000000001,
0xfffff801aeb2bc52)
*** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp
0x00000000
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: intelppm.sys
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffff80000003, 0xfffff880036043a4, 0x0000000000000000,
0x000009932497594e)
*** intelppm.sys - Address 0xfffff880036043a4 base at 0xfffff88003600000 DateStamp
0x50988a16
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: afd.sys
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff803252c272b, 0x0000000000000000,
0xffffffffffffffff)
*** afd.sys - Address 0xfffff88003af1c60 base at 0xfffff88003aa5000 DateStamp
0x509889c6
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file:
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8001b8ba72b, 0x0000000000000000,
0xffffffffffffffff)
*** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp
0x00000000
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8019ced0212, 0x0000000000000000,
0xffffffffffffffff)
*** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp
0x00000000
Bu sitenin çalışmasını sağlamak için gerekli çerezleri ve deneyiminizi iyileştirmek için isteğe bağlı çerezleri kullanıyoruz.