Windows 8 Mavi Ekran Hataları

polis48 · 29 Eylül 2013

Bilgisayarım daha yeni olup orjinal windows 8 pro yüklüdür. Sürekli çeşitli mavi ekran hataları alıyorum. Mesela

Kod:

-kmode_exception_not_handled-
 - irql_not_less_or_equal-,- System_Service_Exception-

Bunun gibi hatalar alıyorum ve bu hatalar sürekli tekrarlıyor. Windows'u yeniledim, sıfırladım ama bu hatalardan bir türlü kurtulamadım. Bilgisayarımı doğru düzgün kullanamıyorum. Yardımlarınızı bekliyorum arkadaşlar.

Sistemim :

i7 işlemci 4700MQ
4 GB NVİDİA GTX 780M ekran kartı
32 GB RAM
240 GB SSD + 750 GB HDD

Minidump dosyaları :

https://disk.yandex.com.tr/public/?hash=bQtuHnwlS0figtXKez9KyzCwtVatvZDdRyz9+GWrhFA=&locale=tr

Murat5038 · 29 Eylül 2013

Windows güncelleştirmelerinizi yükleyin. Sürücülerinizi güncelleyin(Ekran kartı ön planda olmak üzere), Bluetooh driveri ve ethernet wifi bu driverlerin de güncel sürümlerini araştırın. Kısaca Gereksiz yazılımları silip Lazım olan driver ve bios dahil tüm yazılım ve sürücülerinizi güncel tutun.
Not: Verdiğiniz linklerin sadece 1. olan çalışıyor diğerleri boş. Uyarınızda bunu da belirttim, Birden çok dosya göndereceğiniz zaman dosyalarınızı Rarlayıp upload edin.

Recep Baltaş · 30 Eylül 2013

Tek dosya ve yanındaki 10 tane gereksiz boş klasör yeterli olmadı maalesef sorunu anlamak için.

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000000a (0x0000000053f5dd8c, 0x000000000000000d, 0x0000000000000000, 
0xfffff80253ca1a7e)


*** ntoskrnl.exe - Address 0xfffff80253c5d440 base at 0xfffff80253c03000 DateStamp 
0x5165e551

polis48 · 30 Eylül 2013

https://disk.yandex.com.tr/public/?hash=bQtuHnwlS0figtXKez9KyzCwtVatvZDdRyz9+GWrhFA=&locale=tr Şu an bütün minidumplar bunun içinde.

BIOS hariç bütün yazılımların son güncel halini indirdim ve yükledim. Driverlerim hep günceldi ama yinede olmadı.

Murat5038 · 30 Eylül 2013

Söylediğim gibi Sürücülerden kaynaklı problem var.
Atheros ile ilgili sürücülerde, Ekran kartı onboard+ Harici Ekran kartı sürücüsü. Ek olarak İmzamda bulunan kaspersky IS ile güncelleyip fullscan taraması yapın. Eğer yüklü bir antivirüs var ise Kaspersky yüklemeden önce kaldırın. Virüs olma ihtimali de mevcut.

Ayberk Ercan · 30 Eylül 2013

Anakart modeliniz nedir? BIOS'u güncellediniz mi ?, Eğer bu dediğim olmassa BIOS'u sıfırlayın,umarım sistemle alaka bir sorun değildir.

Recep Baltaş · 30 Eylül 2013

Killer Wireless-N 1102 aygıtın sürücüsünü güncelle. Sürücü sorunu gibi.

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: igdkmd64.sys


KMODE_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8020eaed6e2, 0x0000000000000000, 
0xffffffffffffffff)


*** igdkmd64.sys - Address 0xfffff88005258c2c base at 0xfffff88005211000 DateStamp 
0x51899917

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: akw8x64.sys


KMODE_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff800f1afe6ae, 0x0000000000000000, 
0xffffffffffffffff)


*** akw8x64.sys - Address 0xfffff88005ca2831 base at 0xfffff88005a39000 DateStamp 
0x51a7b3cc

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000007, 0x0000000000000000, 
0xfffff8021813af6a)


*** ntoskrnl.exe - Address 0xfffff80218082040 base at 0xfffff80218007000 DateStamp 
0x5010ac4b

Kod:

*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000001, 
0xfffff803f34f07d0)


*** akw8x64.sys - Address 0xfffff88006129e25 base at 0xfffff88006059000 DateStamp 
0x51a7b3cc

Kod:

*** STOP: 0x0000000a (0x0000000053f5dd8c, 0x000000000000000d, 0x0000000000000000, 
0xfffff80253ca1a7e)


*** ntoskrnl.exe - Address 0xfffff80253c5d440 base at 0xfffff80253c03000 DateStamp 
0x5165e551

Kod:

*** STOP: 0x0000000a (0x0000000bffd012ec, 0x000000000000000c, 0x0000000000000000, 
0xfffff800c156b19c)


*** hal.dll - Address 0xfffff800c156b19c base at 0xfffff800c1554000 DateStamp 
0x5010abe8

Kod:

*** STOP: 0x0000000a (0xfffff88022b4df5b, 0x0000000000000002, 0x0000000000000001, 
0xfffff800280a0079)


*** ntoskrnl.exe - Address 0xfffff80028070440 base at 0xfffff80028016000 DateStamp 
0x5165e551

Kod:

*** STOP: 0x0000000a (0xfffffa7fa436cd05, 0x0000000000000002, 0x0000000000000000, 
0xfffff801bae86178)


*** fwpkclnt.sys - Address 0xfffff88001ec0607 base at 0xfffff88001ebf000 DateStamp 
0x513034da

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x000000fc (0xfffff8800154b180, 0x80000000009c2963, 0xfffff8801997e6a0, 
0x0000000000000000)


*** ntoskrnl.exe - Address 0xfffff8026d4c6440 base at 0xfffff8026d46c000 DateStamp 
0x5165e551

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: igdkmd64.sys


ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x000000fc (0xfffffa802d4bb080, 0x80000008236009e3, 0xfffff8801cded940, 
0x0000000000000004)


*** igdkmd64.sys - Address 0xfffff8800464c59a base at 0xfffff88004431000 DateStamp 
0x51899917

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: win32k.sys






If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x00000133 (0x0000000000000001, 0x0000000000000780, 0x0000000000000000, 
0x0000000000000000)


*** win32k.sys - Address 0xfffff9600017a000 base at 0xfffff960000ad000 DateStamp 
0x5010aae5

polis48 · 2 Ekim 2013

Sürücüleri güncelledim olmadı. Atheros Killer Wireless-N 1102 kaldırdım öyle denedim yine olmadı . Ne yapacağımı bilemiyorum. Her yolu denedim olmuyor olmuyor olmuyor

Recep Baltaş · 2 Ekim 2013

Servise göndereceksiniz.

Windows 8 Mavi Ekran Hataları

Ayrıntılı düzenleme

polis48

Hectopat

Murat5038

Yottapat!

Recep Baltaş

Technopat

polis48

Hectopat

Murat5038

Yottapat!

Ayberk Ercan

Megapat

Recep Baltaş

Technopat

polis48

Hectopat

Recep Baltaş

Technopat

Benzer konular

Bu konuyu görüntüleyen kullanıcılar

Technopat Haberler

Yeni konular

Yeni mesajlar

Gizliliğinize önem veriyoruz