Instructions:
1. Download Attachment and unpack IT.
2. Now We have to make boot USB with Free DOS under Windows using Rufus.
3. Run rufus_v1.0.7f.exe in fat 32 /Quick Format / Create a DOS bootable disk.
4. Open Flash folder and copy all the contents to the USB Bootable drive you just made. Open CFG.INI file from USB drive in notepad.
Change FFFF to desired SubSystemVendor ID and SubSystem ID (Device ID) from Vendor List.txt
Code:
[SubSystemVendorID]
FFFF
[SubSystemID]
FFFF
Save CFG.INIInsert Your NEC USB 3.0 Card with empty usb ports.
Restart, enter the Bios or rEFIt and choose your bootable usb drive.
5. Under Free DOS Type in the command below exactly.
Code:
D200FW36.EXE /srom ?
It's detect your chip uPD720200 or uPD720200a and rev. 3 or 4 ....
6.If your detected chip will be uPD720200 rev. 3 Type in the command below exactly.
Code:
D200FW36.EXE /srom 0 /writeall F303408.MEM CFG.INI
.
7. If your detected chip will be uPD720200a rev.4 Type in the command below exactly.
Code:
D200FW36.EXE /srom 0 /writeall F402003.MEM CFG.INI
..
8. Reboot to MAC OS and now you can install driver from Vendor then you desire flash before with SubSystemVendor ID and SubSystem ID (Device ID).
You Can change FFFF to desired in CFG.INI again and Flash again many times as you wish.
Please post hear new information and ADD LIST THE NEW Subsystem Vendor ID and Subsystem Device ID...
Attached Files