Zephyrus G14 Mavi Ekran Hatası

Recep Baltaş

Recep Baltaş

Technopat
Tam Bir Technopat'sınız!
Katılım
14 Ağustos 2010
Mesajlar
79.058
Makaleler
289
Çözümler
2.268
Yer
İstanbul
Daha fazla  
Cinsiyet
Erkek
Profil Kapağı
1522743131
Kullandığım laptopu kız arkadaşıma verdim ve birlikte Diablo IV oynuyoruz ama sanırım cihaz bu kadar yükü kaldıramadı, mavi ekran vermeye başladı. Dökümleri burada da paylaşayım, dursun.

Kod: 
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault).  The first number in the
BugCheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
Else
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: ffff8581c5979e70
Arg3: 00000000e195dae0
Arg4: fffff8055ca40d8c

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 2046

    Key  : Analysis.Elapsed.mSec
    Value: 4329

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 27

    Key  : Analysis.Init.CPU.mSec
    Value: 358

    Key  : Analysis.Init.Elapsed.mSec
    Value: 412255

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 100

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x1000007f

    Key  : Dump.Attributes.AsUlong
    Value: 1808

    Key  : Dump.Attributes.DiagDataWrittenToHeader
    Value: 1

    Key  : Dump.Attributes.ErrorCode
    Value: 0

    Key  : Dump.Attributes.KernelGeneratedTriageDump
    Value: 1

    Key  : Dump.Attributes.LastLine
    Value: Dump completed successfully.

    Key  : Dump.Attributes.ProgressPercentage
    Value: 0

    Key  : Failure.Bucket
    Value: 0x7f_8_STACKPTR_ERROR_nt!KiSystemCall64

    Key  : Failure.Hash
    Value: {5438f673-863e-3550-5938-6f4f847ef976}

    Key  : Hypervisor.Enlightenments.ValueHex
    Value: 1497cf94

    Key  : Hypervisor.Flags.AnyHypervisorPresent
    Value: 1

    Key  : Hypervisor.Flags.ApicEnlightened
    Value: 1

    Key  : Hypervisor.Flags.ApicVirtualizationAvailable
    Value: 0

    Key  : Hypervisor.Flags.AsyncMemoryHint
    Value: 0

    Key  : Hypervisor.Flags.CoreSchedulerRequested
    Value: 0

    Key  : Hypervisor.Flags.CpuManager
    Value: 1

    Key  : Hypervisor.Flags.DeprecateAutoEoi
    Value: 0

    Key  : Hypervisor.Flags.DynamicCpuDisabled
    Value: 1

    Key  : Hypervisor.Flags.Epf
    Value: 0

    Key  : Hypervisor.Flags.ExtendedProcessorMasks
    Value: 1

    Key  : Hypervisor.Flags.HardwareMbecAvailable
    Value: 1

    Key  : Hypervisor.Flags.MaxBankNumber
    Value: 0

    Key  : Hypervisor.Flags.MemoryZeroingControl
    Value: 0

    Key  : Hypervisor.Flags.NoExtendedRangeFlush
    Value: 0

    Key  : Hypervisor.Flags.NoNonArchCoreSharing
    Value: 1

    Key  : Hypervisor.Flags.Phase0InitDone
    Value: 1

    Key  : Hypervisor.Flags.PowerSchedulerQos
    Value: 0

    Key  : Hypervisor.Flags.RootScheduler
    Value: 0

    Key  : Hypervisor.Flags.SynicAvailable
    Value: 1

    Key  : Hypervisor.Flags.UseQpcBias
    Value: 0

    Key  : Hypervisor.Flags.Value
    Value: 4853999

    Key  : Hypervisor.Flags.ValueHex
    Value: 4a10ef

    Key  : Hypervisor.Flags.VpAssistPage
    Value: 1

    Key  : Hypervisor.Flags.VsmAvailable
    Value: 1

    Key  : Hypervisor.RootFlags.AccessStats
    Value: 1

    Key  : Hypervisor.RootFlags.CrashdumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.CreateVirtualProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.DisableHyperthreading
    Value: 0

    Key  : Hypervisor.RootFlags.HostTimelineSync
    Value: 1

    Key  : Hypervisor.RootFlags.HypervisorDebuggingEnabled
    Value: 0

    Key  : Hypervisor.RootFlags.IsHyperV
    Value: 1

    Key  : Hypervisor.RootFlags.LivedumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.MapDeviceInterrupt
    Value: 1

    Key  : Hypervisor.RootFlags.MceEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.Nested
    Value: 0

    Key  : Hypervisor.RootFlags.StartLogicalProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.Value
    Value: 1015

    Key  : Hypervisor.RootFlags.ValueHex
    Value: 3f7


BUGCHECK_CODE:  7f

BUGCHECK_P1: 8

BUGCHECK_P2: ffff8581c5979e70

BUGCHECK_P3: e195dae0

BUGCHECK_P4: fffff8055ca40d8c

FILE_IN_CAB:  071123-10343-01.dmp

DUMP_FILE_ATTRIBUTES: 0x1808
  Kernel Generated Triage Dump

BAD_STACK_POINTER:  00000000e195dae0

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  Code.exe

STACK_TEXT: 
00000000`e195dae0 00007ff8`e0beed74     : 00007ff8`de4542a3 00000000`00000000 00000000`00000000 00009eee`cacee56b : nt!KiSystemCall64+0x28c
000000e3`b53ff238 00007ff8`de4542a3     : 00000000`00000000 00000000`00000000 00009eee`cacee56b 7fffffff`ffffffff : 0x00007ff8`e0beed74
000000e3`b53ff240 00000000`00000000     : 00000000`00000000 00009eee`cacee56b 7fffffff`ffffffff 000000e3`b53ff270 : 0x00007ff8`de4542a3


SYMBOL_NAME:  nt!KiSystemCall64+28c

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.22621.1848

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  28c

FAILURE_BUCKET_ID:  0x7f_8_STACKPTR_ERROR_nt!KiSystemCall64

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {5438f673-863e-3550-5938-6f4f847ef976}


DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff8307a8b525c, memory referenced
Arg2: 00000000000000ff, IRQL
Arg3: 000000000000004c, value 0 = read operation, 1 = write operation
Arg4: fffff8307a8b525c, address which referenced memory

Debugging Details:
------------------

*** WARNING: Check Image - Checksum mismatch - Dump: 0x20308f, File: 0x203111 - C:\ProgramData\Dbg\sym\BTHport.sys\FE15D6201ff000\BTHport.sys

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 2358

    Key  : Analysis.Elapsed.mSec
    Value: 10270

    Key  : Analysis.IO.Other.Mb
    Value: 5

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 33

    Key  : Analysis.Init.CPU.mSec
    Value: 312

    Key  : Analysis.Init.Elapsed.mSec
    Value: 429117

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 100

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0xd1

    Key  : Dump.Attributes.AsUlong
    Value: 1808

    Key  : Dump.Attributes.DiagDataWrittenToHeader
    Value: 1

    Key  : Dump.Attributes.ErrorCode
    Value: 0

    Key  : Dump.Attributes.KernelGeneratedTriageDump
    Value: 1

    Key  : Dump.Attributes.LastLine
    Value: Dump completed successfully.

    Key  : Dump.Attributes.ProgressPercentage
    Value: 0

    Key  : Failure.Bucket
    Value: DISABLED_INTERRUPT_FAULT_CODE_AV_BAD_IP_nt!KiPageFault

    Key  : Failure.Hash
    Value: {f2ab72c5-099d-9077-bfcf-ba12aa825b36}

    Key  : Hypervisor.Enlightenments.ValueHex
    Value: 1497cf94

    Key  : Hypervisor.Flags.AnyHypervisorPresent
    Value: 1

    Key  : Hypervisor.Flags.ApicEnlightened
    Value: 1

    Key  : Hypervisor.Flags.ApicVirtualizationAvailable
    Value: 0

    Key  : Hypervisor.Flags.AsyncMemoryHint
    Value: 0

    Key  : Hypervisor.Flags.CoreSchedulerRequested
    Value: 0

    Key  : Hypervisor.Flags.CpuManager
    Value: 1

    Key  : Hypervisor.Flags.DeprecateAutoEoi
    Value: 0

    Key  : Hypervisor.Flags.DynamicCpuDisabled
    Value: 1

    Key  : Hypervisor.Flags.Epf
    Value: 0

    Key  : Hypervisor.Flags.ExtendedProcessorMasks
    Value: 1

    Key  : Hypervisor.Flags.HardwareMbecAvailable
    Value: 1

    Key  : Hypervisor.Flags.MaxBankNumber
    Value: 0

    Key  : Hypervisor.Flags.MemoryZeroingControl
    Value: 0

    Key  : Hypervisor.Flags.NoExtendedRangeFlush
    Value: 0

    Key  : Hypervisor.Flags.NoNonArchCoreSharing
    Value: 1

    Key  : Hypervisor.Flags.Phase0InitDone
    Value: 1

    Key  : Hypervisor.Flags.PowerSchedulerQos
    Value: 0

    Key  : Hypervisor.Flags.RootScheduler
    Value: 0

    Key  : Hypervisor.Flags.SynicAvailable
    Value: 1

    Key  : Hypervisor.Flags.UseQpcBias
    Value: 0

    Key  : Hypervisor.Flags.Value
    Value: 4853999

    Key  : Hypervisor.Flags.ValueHex
    Value: 4a10ef

    Key  : Hypervisor.Flags.VpAssistPage
    Value: 1

    Key  : Hypervisor.Flags.VsmAvailable
    Value: 1

    Key  : Hypervisor.RootFlags.AccessStats
    Value: 1

    Key  : Hypervisor.RootFlags.CrashdumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.CreateVirtualProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.DisableHyperthreading
    Value: 0

    Key  : Hypervisor.RootFlags.HostTimelineSync
    Value: 1

    Key  : Hypervisor.RootFlags.HypervisorDebuggingEnabled
    Value: 0

    Key  : Hypervisor.RootFlags.IsHyperV
    Value: 1

    Key  : Hypervisor.RootFlags.LivedumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.MapDeviceInterrupt
    Value: 1

    Key  : Hypervisor.RootFlags.MceEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.Nested
    Value: 0

    Key  : Hypervisor.RootFlags.StartLogicalProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.Value
    Value: 1015

    Key  : Hypervisor.RootFlags.ValueHex
    Value: 3f7


BUGCHECK_CODE:  d1

BUGCHECK_P1: fffff8307a8b525c

BUGCHECK_P2: ff

BUGCHECK_P3: 4c

BUGCHECK_P4: fffff8307a8b525c

FILE_IN_CAB:  071823-9453-01.dmp

DUMP_FILE_ATTRIBUTES: 0x1808
  Kernel Generated Triage Dump

READ_ADDRESS: fffff80215f1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 fffff8307a8b525c 

ADDITIONAL_DEBUG_TEXT:  The fault occurred while interrupts were disabled on the processor.

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

TRAP_FRAME:  ffffdf8113653030 -- (.trap 0xffffdf8113653030)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000000003000a rbx=0000000000000000 rcx=00000000400000b0
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8307a8b525c rsp=ffffdf81136531c0 rbp=0000000000000001
 r8=0000000000000006  r9=0000000000000000 r10=0000fffff802155a
r11=ffffd1fc9c400000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up di pl zr ac po nc
fffff830`7a8b525c ??              ???
Resetting default scope

FAILED_INSTRUCTION_ADDRESS: 
+0
fffff830`7a8b525c ??              ???

STACK_TEXT:  
ffffdf81`13652ee8 fffff802`156442a9     : 00000000`0000000a fffff830`7a8b525c 00000000`000000ff 00000000`0000004c : nt!KeBugCheckEx
ffffdf81`13652ef0 fffff802`1563f934     : ffffdf81`136530b9 fffff802`154c1994 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffffdf81`13653030 fffff830`7a8b525c     : 0000000f`c7bf196b 00000000`00989680 0000000f`c7bd9a28 00000000`0000c350 : nt!KiPageFault+0x474
ffffdf81`136531c0 0000000f`c7bf196b     : 00000000`00989680 0000000f`c7bd9a28 00000000`0000c350 00000000`0002625a : 0xfffff830`7a8b525c
ffffdf81`136531c8 00000000`00989680     : 0000000f`c7bd9a28 00000000`0000c350 00000000`0002625a fffff802`1542c672 : 0x0000000f`c7bf196b
ffffdf81`136531d0 0000000f`c7bd9a28     : 00000000`0000c350 00000000`0002625a fffff802`1542c672 fffff7c8`8001e000 : 0x989680
ffffdf81`136531d8 00000000`0000c350     : 00000000`0002625a fffff802`1542c672 fffff7c8`8001e000 00000000`0002625a : 0x0000000f`c7bd9a28
ffffdf81`136531e0 00000000`0002625a     : fffff802`1542c672 fffff7c8`8001e000 00000000`0002625a 00000000`0002625a : 0xc350
ffffdf81`136531e8 fffff802`1542c672     : fffff7c8`8001e000 00000000`0002625a 00000000`0002625a fffff802`155afabb : 0x2625a
ffffdf81`136531f0 fffff802`1542c516     : 00000000`00000000 00000000`00000000 00000000`0002625a fffff7c8`8001e000 : nt!HalpSetTimer+0x142
ffffdf81`13653230 fffff802`1546e553     : 00000000`00000004 00000000`00000000 ffffe201`ddd51180 fffff802`1546edd8 : nt!HalpTimerClockArm+0x166
ffffdf81`13653280 fffff802`15473592     : 00000000`00000003 ffffe201`ddd51180 00000000`00000000 00000000`0002625a : nt!KiSetClockTickRate+0x1e3
ffffdf81`136532e0 fffff802`1546e1ea     : 00000000`00000001 ffffdf81`136535c0 00000000`0000000a ffffe201`ddd51180 : nt!KiSetNextClockTickDueTime+0x432
ffffdf81`136534c0 fffff802`156c7f43     : 00000000`0000150b 00000000`00000001 00000000`0004c4b4 ffff9203`13b02740 : nt!KiSetClockTimer+0xea
ffffdf81`13653610 fffff802`154709c1     : 00000000`00000000 00000000`00000000 00000000`00000000 fffff802`1562ada0 : nt!PpmIdleExecuteTransition+0x257353
ffffdf81`13653a50 fffff802`15633a34     : 00000000`00000000 00000000`00000000 ffff9203`0b7a7080 ffff9203`1d33b040 : nt!PoIdle+0x361
ffffdf81`13653c40 00000000`00000000     : ffffdf81`13654000 ffffdf81`1364e000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x54


SYMBOL_NAME:  nt!KiPageFault+474

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.22621.1992

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  474

FAILURE_BUCKET_ID:  DISABLED_INTERRUPT_FAULT_CODE_AV_BAD_IP_nt!KiPageFault

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {f2ab72c5-099d-9077-bfcf-ba12aa825b36}

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00007fffffff0000, memory referenced
Arg2: 00000000000000ff, IRQL
Arg3: 0000000000000020, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8030444bfac, address which referenced memory

Debugging Details:
------------------

*** WARNING: Check Image - Checksum mismatch - Dump: 0x207fc7, File: 0x20804f - C:\ProgramData\Dbg\sym\BTHport.sys\A82E76B81ff000\BTHport.sys

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 1859

    Key  : Analysis.Elapsed.mSec
    Value: 12979

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 34

    Key  : Analysis.Init.CPU.mSec
    Value: 327

    Key  : Analysis.Init.Elapsed.mSec
    Value: 425466

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 101

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0xa

    Key  : Dump.Attributes.AsUlong
    Value: 1808

    Key  : Dump.Attributes.DiagDataWrittenToHeader
    Value: 1

    Key  : Dump.Attributes.ErrorCode
    Value: 0

    Key  : Dump.Attributes.KernelGeneratedTriageDump
    Value: 1

    Key  : Dump.Attributes.LastLine
    Value: Dump completed successfully.

    Key  : Dump.Attributes.ProgressPercentage
    Value: 0

    Key  : Failure.Bucket
    Value: AV_nt!RtlpxVirtualUnwind

    Key  : Failure.Hash
    Value: {90caf8d4-a034-a257-3599-d8f696fd9681}

    Key  : Hypervisor.Enlightenments.ValueHex
    Value: 1497cf94

    Key  : Hypervisor.Flags.AnyHypervisorPresent
    Value: 1

    Key  : Hypervisor.Flags.ApicEnlightened
    Value: 1

    Key  : Hypervisor.Flags.ApicVirtualizationAvailable
    Value: 0

    Key  : Hypervisor.Flags.AsyncMemoryHint
    Value: 0

    Key  : Hypervisor.Flags.CoreSchedulerRequested
    Value: 0

    Key  : Hypervisor.Flags.CpuManager
    Value: 1

    Key  : Hypervisor.Flags.DeprecateAutoEoi
    Value: 0

    Key  : Hypervisor.Flags.DynamicCpuDisabled
    Value: 1

    Key  : Hypervisor.Flags.Epf
    Value: 0

    Key  : Hypervisor.Flags.ExtendedProcessorMasks
    Value: 1

    Key  : Hypervisor.Flags.HardwareMbecAvailable
    Value: 1

    Key  : Hypervisor.Flags.MaxBankNumber
    Value: 0

    Key  : Hypervisor.Flags.MemoryZeroingControl
    Value: 0

    Key  : Hypervisor.Flags.NoExtendedRangeFlush
    Value: 0

    Key  : Hypervisor.Flags.NoNonArchCoreSharing
    Value: 1

    Key  : Hypervisor.Flags.Phase0InitDone
    Value: 1

    Key  : Hypervisor.Flags.PowerSchedulerQos
    Value: 0

    Key  : Hypervisor.Flags.RootScheduler
    Value: 0

    Key  : Hypervisor.Flags.SynicAvailable
    Value: 1

    Key  : Hypervisor.Flags.UseQpcBias
    Value: 0

    Key  : Hypervisor.Flags.Value
    Value: 4853999

    Key  : Hypervisor.Flags.ValueHex
    Value: 4a10ef

    Key  : Hypervisor.Flags.VpAssistPage
    Value: 1

    Key  : Hypervisor.Flags.VsmAvailable
    Value: 1

    Key  : Hypervisor.RootFlags.AccessStats
    Value: 1

    Key  : Hypervisor.RootFlags.CrashdumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.CreateVirtualProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.DisableHyperthreading
    Value: 0

    Key  : Hypervisor.RootFlags.HostTimelineSync
    Value: 1

    Key  : Hypervisor.RootFlags.HypervisorDebuggingEnabled
    Value: 0

    Key  : Hypervisor.RootFlags.IsHyperV
    Value: 1

    Key  : Hypervisor.RootFlags.LivedumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.MapDeviceInterrupt
    Value: 1

    Key  : Hypervisor.RootFlags.MceEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.Nested
    Value: 0

    Key  : Hypervisor.RootFlags.StartLogicalProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.Value
    Value: 1015

    Key  : Hypervisor.RootFlags.ValueHex
    Value: 3f7


BUGCHECK_CODE:  a

BUGCHECK_P1: 7fffffff0000

BUGCHECK_P2: ff

BUGCHECK_P3: 20

BUGCHECK_P4: fffff8030444bfac

FILE_IN_CAB:  071223-9140-01.dmp

DUMP_FILE_ATTRIBUTES: 0x1808
  Kernel Generated Triage Dump

READ_ADDRESS: fffff80304f1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00007fffffff0000 

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  Code.exe

TRAP_FRAME:  ffffe38160171f10 -- (.trap 0xffffe38160171f10)
Unable to read trap frame at ffffe381`60171f10

STACK_TEXT:  
ffffe381`60171dc8 fffff803`046418a9     : 00000000`0000000a 00007fff`ffff0000 00000000`000000ff 00000000`00000020 : nt!KeBugCheckEx
ffffe381`60171dd0 fffff803`0463cf34     : 00000000`00000000 fffff803`042bc3e8 ffffe381`601721c0 ffffdd83`035a8c48 : nt!KiBugCheckDispatch+0x69
ffffe381`60171f10 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x474


SYMBOL_NAME:  nt!RtlpxVirtualUnwind+48c

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.22621.1848

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  48c

FAILURE_BUCKET_ID:  AV_nt!RtlpxVirtualUnwind

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {90caf8d4-a034-a257-3599-d8f696fd9681}

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8010fc12c56, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 4375

    Key  : Analysis.Elapsed.mSec
    Value: 10851

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 312

    Key  : Analysis.Init.Elapsed.mSec
    Value: 421799

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 100

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x1e

    Key  : Dump.Attributes.AsUlong
    Value: 1008

    Key  : Dump.Attributes.DiagDataWrittenToHeader
    Value: 1

    Key  : Dump.Attributes.ErrorCode
    Value: 0

    Key  : Dump.Attributes.KernelGeneratedTriageDump
    Value: 1

    Key  : Dump.Attributes.LastLine
    Value: Dump completed successfully.

    Key  : Dump.Attributes.ProgressPercentage
    Value: 0

    Key  : Failure.Bucket
    Value: AV_R_nt!KiOpDecode

    Key  : Failure.Hash
    Value: {8ca9c6cd-2ac3-658e-935b-4ad24dd80455}


BUGCHECK_CODE:  1e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff8010fc12c56

BUGCHECK_P3: 0

BUGCHECK_P4: ffffffffffffffff

FILE_IN_CAB:  043023-8156-01.dmp

DUMP_FILE_ATTRIBUTES: 0x1008
  Kernel Generated Triage Dump

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: fffff8011071c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffffffffffffffff 

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  chrome.exe

TRAP_FRAME:  ccccccccccccccc3 -- (.trap 0xccccccccccccccc3)
Unable to read trap frame at cccccccc`ccccccc3

STACK_TEXT:  
ffffcf81`89d2f558 fffff801`0fec8654     : 00000000`0000001e ffffffff`c0000005 fffff801`0fc12c56 00000000`00000000 : nt!KeBugCheckEx
ffffcf81`89d2f560 fffff801`0fe34612     : ffffcf81`89d2fd70 ffffcf81`89d2f630 fffff801`0fa00000 fffff801`0fe2a562 : nt!KiExceptionStackSwitchHandler+0x14ad0c
ffffcf81`89d2f5a0 fffff801`0fc0e283     : ffffcf81`89d30dd0 ffffcf81`89d30558 fffff801`0fe2a562 fffff801`0fae9b58 : nt!RtlpExecuteHandlerForException+0x12
ffffcf81`89d2f5d0 fffff801`0fc120c7     : ffffffff`ffffffff ffffcf81`89d30600 ffffcf81`89d30600 ffffcf81`89d2fd70 : nt!RtlDispatchException+0x2f3
ffffcf81`89d2fd40 fffff801`0fe3eafc     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchException+0x317
ffffcf81`89d30420 fffff801`0fe39b83     : fffffb80`c2a76088 fffff801`0fc11235 fffffb80`c2a762c0 ffffcf81`89d30900 : nt!KiExceptionDispatch+0x13c
ffffcf81`89d30600 fffff801`0fc12c56     : fffff801`0fc12c8e 00010601`00000001 fffff801`0fcec660 fffff801`0fcecad7 : nt!KiGeneralProtectionFault+0x343
ffffcf81`89d30798 ffffcf81`89d30900     : fffff801`0fc126a4 fffffb80`c4580918 00000000`00000000 00000000`00000000 : nt!KiOpDecode+0x62
ffffcf81`89d307f8 fffff801`0fc126a4     : fffffb80`c4580918 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffffcf81`89d30900
ffffcf81`89d30800 fffff801`0fc1207e     : ffffffff`ffffffff fffffb80`c45809f9 00000000`00000001 ffffcf81`89d30900 : nt!KiPreprocessFault+0xc8
ffffcf81`89d308d0 fffff801`0fe2a562     : 1f0ffff7`712215ff 5b20c483`48000044 cccccccc`ccccccc3 cccccccc`cccccccc : nt!KiDispatchException+0x2ce
ffffcf81`89d30fb0 fffff801`0fe2a530     : fffff801`0fe3eaf5 00000000`00001000 ffffdf8f`e84460c0 ffff8000`00000000 : nt!KxExceptionDispatchOnExceptionStack+0x12
fffffb80`c45807d8 fffff801`0fe3eaf5     : 00000000`00001000 ffffdf8f`e84460c0 ffff8000`00000000 ffffdf8f`e8446800 : nt!KiExceptionDispatchOnExceptionStackContinue
fffffb80`c45807e0 fffff801`0fe3a00e     : ffffdf8f`e8446740 00000000`00000111 000003a9`040574d5 00000000`00000000 : nt!KiExceptionDispatch+0x135
fffffb80`c45809c0 e400000b`2c00000e     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x44e
e800000b`4400000e 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xe400000b`2c00000e


SYMBOL_NAME:  nt!KiOpDecode+62

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.22621.1555

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  62

FAILURE_BUCKET_ID:  AV_R_nt!KiOpDecode

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {8ca9c6cd-2ac3-658e-935b-4ad24dd80455}
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8007a43f9d1, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 3124

    Key  : Analysis.Elapsed.mSec
    Value: 6153

    Key  : Analysis.IO.Other.Mb
    Value: 4

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 30

    Key  : Analysis.Init.CPU.mSec
    Value: 328

    Key  : Analysis.Init.Elapsed.mSec
    Value: 417504

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 100

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x1e

    Key  : Dump.Attributes.AsUlong
    Value: 1808

    Key  : Dump.Attributes.DiagDataWrittenToHeader
    Value: 1

    Key  : Dump.Attributes.ErrorCode
    Value: 0

    Key  : Dump.Attributes.KernelGeneratedTriageDump
    Value: 1

    Key  : Dump.Attributes.LastLine
    Value: Dump completed successfully.

    Key  : Dump.Attributes.ProgressPercentage
    Value: 0

    Key  : Failure.Bucket
    Value: AV_R_nt!KiPageFault

    Key  : Failure.Hash
    Value: {bb17982c-c344-be80-846a-c0ee23063bf1}

    Key  : Hypervisor.Enlightenments.ValueHex
    Value: 1497cf94

    Key  : Hypervisor.Flags.AnyHypervisorPresent
    Value: 1

    Key  : Hypervisor.Flags.ApicEnlightened
    Value: 1

    Key  : Hypervisor.Flags.ApicVirtualizationAvailable
    Value: 0

    Key  : Hypervisor.Flags.AsyncMemoryHint
    Value: 0

    Key  : Hypervisor.Flags.CoreSchedulerRequested
    Value: 0

    Key  : Hypervisor.Flags.CpuManager
    Value: 1

    Key  : Hypervisor.Flags.DeprecateAutoEoi
    Value: 0

    Key  : Hypervisor.Flags.DynamicCpuDisabled
    Value: 1

    Key  : Hypervisor.Flags.Epf
    Value: 0

    Key  : Hypervisor.Flags.ExtendedProcessorMasks
    Value: 1

    Key  : Hypervisor.Flags.HardwareMbecAvailable
    Value: 1

    Key  : Hypervisor.Flags.MaxBankNumber
    Value: 0

    Key  : Hypervisor.Flags.MemoryZeroingControl
    Value: 0

    Key  : Hypervisor.Flags.NoExtendedRangeFlush
    Value: 0

    Key  : Hypervisor.Flags.NoNonArchCoreSharing
    Value: 1

    Key  : Hypervisor.Flags.Phase0InitDone
    Value: 1

    Key  : Hypervisor.Flags.PowerSchedulerQos
    Value: 0

    Key  : Hypervisor.Flags.RootScheduler
    Value: 0

    Key  : Hypervisor.Flags.SynicAvailable
    Value: 1

    Key  : Hypervisor.Flags.UseQpcBias
    Value: 0

    Key  : Hypervisor.Flags.Value
    Value: 4853999

    Key  : Hypervisor.Flags.ValueHex
    Value: 4a10ef

    Key  : Hypervisor.Flags.VpAssistPage
    Value: 1

    Key  : Hypervisor.Flags.VsmAvailable
    Value: 1

    Key  : Hypervisor.RootFlags.AccessStats
    Value: 1

    Key  : Hypervisor.RootFlags.CrashdumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.CreateVirtualProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.DisableHyperthreading
    Value: 0

    Key  : Hypervisor.RootFlags.HostTimelineSync
    Value: 1

    Key  : Hypervisor.RootFlags.HypervisorDebuggingEnabled
    Value: 0

    Key  : Hypervisor.RootFlags.IsHyperV
    Value: 1

    Key  : Hypervisor.RootFlags.LivedumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.MapDeviceInterrupt
    Value: 1

    Key  : Hypervisor.RootFlags.MceEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.Nested
    Value: 0

    Key  : Hypervisor.RootFlags.StartLogicalProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.Value
    Value: 1015

    Key  : Hypervisor.RootFlags.ValueHex
    Value: 3f7


BUGCHECK_CODE:  1e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff8007a43f9d1

BUGCHECK_P3: 0

BUGCHECK_P4: ffffffffffffffff

FILE_IN_CAB:  071323-8843-01.dmp

DUMP_FILE_ATTRIBUTES: 0x1808
  Kernel Generated Triage Dump

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: fffff8007ad1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffffffffffffffff 

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  chrome.exe

STACK_TEXT:  
ffff9700`a09728c8 fffff800`7a4f371d     : 00000000`0000001e ffffffff`c0000005 fffff800`7a43f9d1 00000000`00000000 : nt!KeBugCheckEx
ffff9700`a09728d0 fffff800`7a42fe42     : 00000000`f64dc943 00000000`f64dd943 00000000`f64de943 00000000`f64df943 : nt!KiDispatchException+0x1f12cd
ffff9700`a0972fb0 fffff800`7a42fe10     : fffff800`7a4443f5 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxExceptionDispatchOnExceptionStack+0x12
ffffcc84`c18a0648 fffff800`7a4443f5     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiExceptionDispatchOnExceptionStackContinue
ffffcc84`c18a0650 fffff800`7a43f483     : ffff870f`a4f860c0 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiExceptionDispatch+0x135
ffffcc84`c18a0830 fffff800`7a43f9d1     : ffff870f`a4f86740 00000000`00000111 000000b7`e07ff6c8 fffff800`7a78b2a3 : nt!KiGeneralProtectionFault+0x343
ffffcc84`c18a09c0 6c456c6f`72746e6f     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x511
6d202020`20202020 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x6c456c6f`72746e6f


SYMBOL_NAME:  nt!KiPageFault+511

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.22621.1992

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  511

FAILURE_BUCKET_ID:  AV_R_nt!KiPageFault

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {bb17982c-c344-be80-846a-c0ee23063bf1}

Üstünkörü baktım ama kesin bir sebep göremedim. Bir bellek testi yapacağım. Merak edenler için dökümleri de paylaşıyorum.

 
Armory Crate uygulamasına gelen güncelleme sonrası, ''eco mode'' seçeneğine tıkladığımda cihazdaki ilk mavi ekranımı aldım ben de. G15, 6800HS olan bir ürün kullanıyorum. Uygulamayı kaldırıp yeniden yüklediğimde sorun düzeldi. Arada bağlantı var mıdır bilemedim, ama cihazı ilk aldığım dönemdeki bir sürüm nedeniyle de bazı modlarda oyun içinde işlemci fazlaca ısınıyordu. En sorunsuz kullanımı her zaman dahili GPU'yu devre dışı bırakarak elde ettim.
 
Ön inceleme gerçekleştirdiğimde Bluetooth sürücüsünü bi' güncelleyiver derim Recep abi. Ek olarak RAM'de bir yetersizlik gerçekleşmiş gibi. Arka plandaki gereksiz şeyleri kapatsın yenge 😅

Bir de Event Viewer'dan System loglarını atarsan yine bir şeyler çıkarabiliriz abi. Sisteme bakmamı istemen durumunda bi' alo edersin ya da yazarsın artık. XD

Kolay gelsin 🙏

Cihaz bilgileri:

Kod: 
Machine ID Information [From Smbios 3.2, DMIVersion 0, Size=1571]
BiosMajorRelease = 5
BiosMinorRelease = 16
FirmwareMajorRelease = 3
FirmwareMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = GA401IV.220
BiosReleaseDate = 03/14/2022
SystemManufacturer = ASUSTeK COMPUTER INC.
SystemProductName = ROG Zephyrus G14 GA401IV
SystemFamily = ROG Zephyrus G14
SystemVersion = 1.0      
SystemSKU =
BaseBoardManufacturer = ASUSTeK COMPUTER INC.
BaseBoardProduct = GA401IV
BaseBoardVersion = 1.0      
[SMBIOS Data Tables v3.2]
[DMI Version - 0]
[2.0 Calling Convention - No]
[Table Size - 1571 bytes]

[BIOS Information (Type 0) - Length 26 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  GA401IV.220
  BIOS Starting Address Segment f000
  BIOS Release Date             03/14/2022
  BIOS ROM Size                 1000000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       07: - Smart Battery Supported
       08: - BIOS Boot Specification Supported
       10: - Enable Targeted Content Distribution
       11: - UEFI Specification Supported
  BIOS Major Revision           5
  BIOS Minor Revision           16
  EC Firmware Major Revision    3
  EC Firmware Minor Revision    15
  Extended BIOS ROM Size        16 MB
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  ASUSTeK COMPUTER INC.
  Product Name                  ROG Zephyrus G14 GA401IV
  Version                       1.0      
  Serial Number                 L5NRKD010996226
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                    
  Family                        ROG Zephyrus G14
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  ASUSTeK COMPUTER INC.
  Product                       GA401IV
  Version                       1.0      
  Serial Number                 5404MC02K2
  Asset Tag                                        
  Feature Flags                 09h
       00: - Motherboard
       03: - Replaceable
  Location                      MIDDLE            
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  ASUSTeK COMPUTER INC.
  Chassis Type                  Notebook
  Version                       1.0      
  Serial Number                              
  Asset Tag Number                        
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        3
[ (Type 256) - Length 31 - Handle 0008h]
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 0009h]
[Physical Memory Array (Type 16) - Length 23 - Handle 000ah]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       0009h
  Number of Memory Devices      2
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 000bh]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           000ah
  Partition Width               02
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[Cache Information (Type 7) - Length 27 - Handle 000ch]
  Socket Designation            L1 - Cache
  Cache Configuration           0180h - WBEnabled Int NonSocketed L1
  Maximum Cache Size            0200h - 512K
  Installed Size                0200h - 512K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
  Maximum Cache Size 2          200 - 00000512l Kb
  Installed Cache Size 2        200 - 00000512l Kb
[Cache Information (Type 7) - Length 27 - Handle 000dh]
  Socket Designation            L2 - Cache
  Cache Configuration           0181h - WBEnabled Int NonSocketed L2
  Maximum Cache Size            1000h - 4096K
  Installed Size                1000h - 4096K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
  Maximum Cache Size 2          1000 - 00004096l Kb
  Installed Cache Size 2        1000 - 00004096l Kb
[Cache Information (Type 7) - Length 27 - Handle 000eh]
  Socket Designation            L3 - Cache
  Cache Configuration           0182h - WBEnabled Int NonSocketed L3
  Maximum Cache Size            2000h - 8192K
  Installed Size                2000h - 8192K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 16-way Set-Associative
  Maximum Cache Size 2          2000 - 00008192l Kb
  Installed Cache Size 2        2000 - 00008192l Kb
[Processor Information (Type 4) - Length 48 - Handle 000fh]
  Socket Designation            FP6
  Processor Type                Central Processor
  Processor Family              6bh - AMD Zen Processor Family
  Processor Manufacturer        Advanced Micro Devices, Inc.
  Processor ID                   10f8600fffb8b17
  Processor Version             [String Not Found]
  Processor Voltage             8ch - 1.2V
  External Clock                100MHz
  Max Speed                     4400MHz
  Current Speed                 3000MHz
  Status                        Enabled Populated
  Processor Upgrade             None
  L1 Cache Handle               000ch
  L2 Cache Handle               000dh
  L3 Cache Handle               000eh
  Serial Number                 [String Not Found]
  Asset Tag Number              [String Not Found]
  Part Number                   [String Not Found]
  Core Count                    8
  Core Enabled                  8
  Thread Count                  16
  Processor Characteristics     fc
  Enabled Characteristics:
       0x 2: 64-bit Capable
       0x 3: Multi-Core
       0x 4: Hardware Thread
       0x 5: Execute Protection
       0x 6: Enhanced Virtualization
       0x 7: Power/Performance Control
  Processor Family_2            6bh - AMD Zen Processor Family
  Core Count 2                  8
  Core Enabled 2                8
  Thread Count 2                16
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 0010h]
[Memory Device (Type 17) - Length 84 - Handle 0011h]
  Memory Error Info Handle      0010h
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   0dh - SODIMM
  Device Set                    [None]
  Device Locator                DIMM 0
  Bank Locator                  P0 CHANNEL A
  Memory Type                   1ah - DDR4
  Type Detail                   4080h - Synchronous Unbuffered (Unregistered)
  Speed                         3200MHz
  Manufacturer                  Micron Technology
  Serial Number                        
  Asset Tag Number              [String Not Specified]
  Part Number                   8ATF1G64HZ-3G2J1  
  Attributes                    1
  Extended Size                 0
  Configured Memory Speed       3200
  Minimum Voltage               1200
  Maximum Voltage               1200
  Configured Voltage            1200
  Memory Technology             3
  Memory Operating Mode Capability     8
  Firmware Version              6
  Module Manufacturer Id        11392
  Module Product Id             0
  Memory Subsystem Controller Manufacturer Id  0
  Memory Subsystem Controller Product Id       0
  Non-Volatile Size             0
  Volatile Size                 0
  Cache Size                    0
  Logical Size                  0
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0012h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Device Handle          0011h
  Mem Array Mapped Adr Handle   000bh
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 0013h]
[Memory Device (Type 17) - Length 84 - Handle 0014h]
  Memory Error Info Handle      0013h
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   0dh - SODIMM
  Device Set                    [None]
  Device Locator                DIMM 0
  Bank Locator                  P0 CHANNEL B
  Memory Type                   1ah - DDR4
  Type Detail                   4080h - Synchronous Unbuffered (Unregistered)
  Speed                         3200MHz
  Manufacturer                  Micron Technology
  Serial Number                        
  Asset Tag Number              [String Not Specified]
  Part Number                   8ATF1G64HZ-3G2J1  
  Attributes                    1
  Extended Size                 0
  Configured Memory Speed       3200
  Minimum Voltage               1200
  Maximum Voltage               1200
  Configured Voltage            1200
  Memory Technology             3
  Memory Operating Mode Capability     8
  Firmware Version              6
  Module Manufacturer Id        11392
  Module Product Id             0
  Memory Subsystem Controller Manufacturer Id  0
  Memory Subsystem Controller Product Id       0
  Non-Volatile Size             0
  Volatile Size                 0
  Cache Size                    0
  Logical Size                  0
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0015h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Device Handle          0014h
  Mem Array Mapped Adr Handle   000bh
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[Onboard Devices Information (Type 10) - Length 26 - Handle 0028h]
Note: The On Board Device Information (Type 10) struct is obsolete as of SMBIOs spec v2.6  Number of Devices             11
  01: Type                      Video [enabled]
  01: Description               VGA
  01: Type                      Ethernet [enabled]
  01: Description               GLAN
  01: Type                      Ethernet [enabled]
  01: Description               WLAN
  01: Type                      Sound [enabled]
  01: Description               Audio CODEC
  01: Type                      Specification Reserved [enabled]
  01: Description               SATA Controller
  01: Type                      Other [enabled]
  01: Description               USB 2.0 Controller
  01: Type                      Other [enabled]
  01: Description               USB 3.0 Controller
  01: Type                      Other [enabled]
  01: Description               SMBus Controller
  01: Type                      Other [enabled]
  01: Description               Card Reader
  01: Type                      Other [enabled]
  01: Description               Cmos Camera
  01: Type                      Other [enabled]
  01: Description               Bluetooth
[OEM Strings (Type 11) - Length 5 - Handle 0029h]
  Number of Strings             5
   1                            kPJ-+7X7+EfTa
   2                            jTyRUBSNi7Ydf
   3                            fCrOzJ6x1i-eh
   4                            
   5                            
[System Configuration Options (Type 12) - Length 5 - Handle 002ah]
[ (Type 256) - Length 4 - Handle 002ch

Ek şeyler:

Kod: 
2: kd> !process ffffbb8a7c886080
PROCESS ffffbb8a7c886080
    SessionId: none  Cid: 0b9c    Peb: 14bbfca000  ParentCid: 09bc
    DirBase: 2fccd8000  ObjectTable: ffffa7852f873080  HandleCount: <Data Not Accessible>
    Image: Code.exe
    VadRoot ffffbb8a89bd8dc0 Vads 194 Clone 0 Private 885322. Modified 741998. Locked 0.
    DeviceMap ffffa7853ca13b90
    Token                             ffffa7855fedc0a0
    ReadMemory error: Cannot get nt!KeMaximumIncrement value.
fffff78000000000: Unable to get shared data
    ElapsedTime                       00:00:00.000
    UserTime                          00:00:00.000
    KernelTime                        00:00:00.000
    QuotaPoolUsage[PagedPool]         527040
    QuotaPoolUsage[NonPagedPool]      37240
    Working Set Sizes (now,min,max)  (207668, 50, 345) (830672KB, 200KB, 1380KB)
    PeakWorkingSetSize                280575
    VirtualSize                       3252158 Mb
    PeakVirtualSize                   3252198 Mb
    PageFaultCount                    1059756
    MemoryPriority                    BACKGROUND
    BasePriority                      8
    CommitCharge                      938692
    Job                               ffffbb8a845440a0

        THREAD ffffbb8a7a1ac080  Cid 0b9c.2e68  Teb: 00000014bbfcb000 Win32Thread: ffffbb8a84746790 RUNNING on processor 2
        Not impersonating
GetUlongFromAddress: unable to read from fffff80304e0bf74
        Owning Process            ffffbb8a7c886080       Image:         Code.exe
        Attached Process          N/A            Image:         N/A
fffff78000000000: Unable to get shared data
        Wait Start TickCount      5804504    
        Context Switch Count      209426643      IdealProcessor: 2            
        ReadMemory error: Cannot get nt!KeMaximumIncrement value.
        UserTime                  00:00:00.000
        KernelTime                00:00:00.000
        Win32 Start Address 0x00007ff621ffede0
        Stack Init ffffdd83031aac70 Current ffffdd83031aa6c0
        Base ffffdd83031ab000 Limit ffffdd83031a5000 Call 0000000000000000
        Priority 10 BasePriority 8 PriorityDecrement 0 IoPriority 2 PagePriority 5
        Child-SP          RetAddr               Call Site
        ffffe381`60171dc8 fffff803`046418a9     nt!KeBugCheckEx
        ffffe381`60171dd0 fffff803`0463cf34     nt!KiBugCheckDispatch+0x69
        ffffe381`60171f10 00000000`00000000     nt!KiPageFault+0x474

        *** Error in reading nt!_ETHREAD @ ffffbb8a8deef080

2: kd> !process ffffbb8a7c886080
PROCESS ffffbb8a7c886080
    SessionId: none  Cid: 0b9c    Peb: 14bbfca000  ParentCid: 09bc
    DirBase: 2fccd8000  ObjectTable: ffffa7852f873080  HandleCount: <Data Not Accessible>
    Image: Code.exe
    VadRoot ffffbb8a89bd8dc0 Vads 194 Clone 0 Private 885322. Modified 741998. Locked 0.
    DeviceMap ffffa7853ca13b90
    Token                             ffffa7855fedc0a0
    ReadMemory error: Cannot get nt!KeMaximumIncrement value.
fffff78000000000: Unable to get shared data
    ElapsedTime                       00:00:00.000
    UserTime                          00:00:00.000
    KernelTime                        00:00:00.000
    QuotaPoolUsage[PagedPool]         527040
    QuotaPoolUsage[NonPagedPool]      37240
    Working Set Sizes (now,min,max)  (207668, 50, 345) (830672KB, 200KB, 1380KB)
    PeakWorkingSetSize                280575
    VirtualSize                       3252158 Mb
    PeakVirtualSize                   3252198 Mb
    PageFaultCount                    1059756
    MemoryPriority                    BACKGROUND
    BasePriority                      8
    CommitCharge                      938692
    Job                               ffffbb8a845440a0

        THREAD ffffbb8a7a1ac080  Cid 0b9c.2e68  Teb: 00000014bbfcb000 Win32Thread: ffffbb8a84746790 RUNNING on processor 2
        Not impersonating
GetUlongFromAddress: unable to read from fffff80304e0bf74
        Owning Process            ffffbb8a7c886080       Image:         Code.exe
        Attached Process          N/A            Image:         N/A
fffff78000000000: Unable to get shared data
        Wait Start TickCount      5804504    
        Context Switch Count      209426643      IdealProcessor: 2            
        ReadMemory error: Cannot get nt!KeMaximumIncrement value.
        UserTime                  00:00:00.000
        KernelTime                00:00:00.000
        Win32 Start Address 0x00007ff621ffede0
        Stack Init ffffdd83031aac70 Current ffffdd83031aa6c0
        Base ffffdd83031ab000 Limit ffffdd83031a5000 Call 0000000000000000
        Priority 10 BasePriority 8 PriorityDecrement 0 IoPriority 2 PagePriority 5
        Child-SP          RetAddr               Call Site
        ffffe381`60171dc8 fffff803`046418a9     nt!KeBugCheckEx
        ffffe381`60171dd0 fffff803`0463cf34     nt!KiBugCheckDispatch+0x69
        ffffe381`60171f10 00000000`00000000     nt!KiPageFault+0x474

        *** Error in reading nt!_ETHREAD @ ffffbb8a8deef080
 
Bellek bütünlüğü (HVCI) ve hypervisor türevlerini varsa kapatıp deneyebilir misiniz? Sistem bilgisine girdiğinizde "Sanallaştırma tabanlı güvenlik" devre dışı olmalı.
 
Recep Baltaş dedi:
WhoCrashed ile de baktım, bellek testi ve termal çözüm önerdi. Cihaza sıvı metal macun uygulaması yapmayı planlıyorum.
Genişletmek için tıkla...
Hocam kimsenin yapmadığı kadar detaylı bir video alabilir miyiz bununla ilgili rica etsem. Gerçekten ama gerçekten çok iyi olur hocam. Cihazın bloğunu da güzelce yorumlayıp ondan sonra her adımını tek tek çekebilir misiniz? Şimdiden çok teşekkür ederim.
 

Benzer konular

Xeon
ASUS Zephyrus G14 ekran değişimi
Mesaj
4
Görüntüleme
159
Legender07
Legender07
KemSay
ASUS zephyrus G14 neden stoğu yok?
Mesaj
1
Görüntüleme
1B
Lev1
Lev1
H
  • Soru
ASUS Zephyrus G14 nasıldır?
Mesaj
3
Görüntüleme
282
allfader
allfader
Teccno
3050Ti Zephyrus G14 nasıldır?
2
Mesaj
17
Görüntüleme
1B
gmaschine
gmaschine
celalistşengörist
Zephyrus G14 alınır mı?
2 3
Mesaj
29
Görüntüleme
2B
celalistşengörist
celalistşengörist

Yeni konular

Yeni mesajlar

Geri
Yukarı