Çözüldü Amdacpafd.sys mavi ekran hatası

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
İşletim sistemi
Windows 11

ElzelAlem

Femtopat
Katılım
11 Nisan 2023
Mesajlar
4
Daha fazla  
Cinsiyet
Erkek
RAM
16 GB
SSD veya HDD modeli
1TB SSD
Ekran kartı
AMD Radeon RX 5500M
İşlemci
AMD Ryzen 7 5800H
Merhaba.
Ben sistemimdeki Realtek gibi yazılımları, sürücüleri güncellemek istediğimde mavi ekran alıyorum
Hata kodu: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED ardından sistemim yeniden başlatılıyor
Bilgisayar markası MSI Bravo 15 B5DD-209XTR modeli. MSI'ın kendi sitesinden indirdiğim sürücüler bile güncellenirken mavi ekran veriyor.
Yardımcı olursanız çok sevinirim teşekkürler.

  • Ryzen 7 5800H
  • RX 5500M
  • 1 TB SSD
  • 16 GB RAM
  • Windows 11 Pro

 
Son düzenleyen: Moderatör:
Çözüm
"Aygıt Yöneticisi" yazıp uygulamayı açın. Ardından açılan pencerede bulunan sürücülere sağ tıklayın. Tıkladığınızda "sürücüyü güncelle" gibi bir seçenek olması lazım. Ona basın ve kolayca güncellenmesini bekleyin.
Bu özellik artık çalışmıyor. Ayrıca lütfen bir daha dökümleri görsel olarak paylaşma @McGucket

Dökümleri inceledim. Sorun amdacpafd.sys kaynaklı. "AMD Audio Device" ve "AMD High Definition Audio Device" adlı iki donanım nesnesini devre dışı bırakırsanız sorun çözülmeli. Tabi bu bir geçici çözüm. Kalıcı olacağına inadığım çözüm yonga seti sürücüsünü güncellemek:


Kod:
start             end                 module name
fffff807`73540000 fffff807`735a9000   amdacpafd T (no symbols)           
    Loaded symbol image file: amdacpafd.sys
    Image path: \SystemRoot\System32\DriverStore\FileRepository\amdacpafd.inf_amd64_dea03ff0fb4183f1\amdacpafd.sys
    Image name: amdacpafd.sys
    Browse all global symbols  functions  data
    Timestamp:        Fri Feb 17 01:35:01 2023 (63EEAF95)
    CheckSum:         0006F10E
    ImageSize:        00069000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Kod:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80692be5e8c, The address that the exception occurred at
Arg3: ffff9184fb2621f8, Exception Record Address
Arg4: ffff9184fb261a10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1499

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 9436

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 33

    Key  : Analysis.Init.CPU.mSec
    Value: 359

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14265

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 94

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-10375-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff80692be5e8c

BUGCHECK_P3: ffff9184fb2621f8

BUGCHECK_P4: ffff9184fb261a10

EXCEPTION_RECORD:  ffff9184fb2621f8 -- (.exr 0xffff9184fb2621f8)
ExceptionAddress: fffff80692be5e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  ffff9184fb261a10 -- (.cxr 0xffff9184fb261a10)
rax=ffffa789dd57f050 rbx=0000000000000000 rcx=0000000000000000
rdx=ffff9184fb2624c0 rsi=0000000000000003 rdi=ffffa789db6dc9d0
rip=fffff80692be5e8c rsp=ffff9184fb262430 rbp=ffff9184fb2624c0
 r8=0000000000000003  r9=ffff9184fb262200 r10=0000000000000000
r11=0000000000000000 r12=ffffb98aa5882b50 r13=0000000000000000
r14=fffff80692bcfb00 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050286
amdacpafd+0x55e8c:
fffff806`92be5e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8068051c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
ffff9184`fb262430 00000000`00000000     : ffff9184`fb2624c0 fffff806`92bf2bf0 ffff9184`fb262000 fffff806`7feec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xffff9184fb261a10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff800bdbd5e8c, The address that the exception occurred at
Arg3: ffffc28c5c1af1f8, Exception Record Address
Arg4: ffffc28c5c1aea10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1702

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 8985

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 32

    Key  : Analysis.Init.CPU.mSec
    Value: 390

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14707

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 95

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11625-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff800bdbd5e8c

BUGCHECK_P3: ffffc28c5c1af1f8

BUGCHECK_P4: ffffc28c5c1aea10

EXCEPTION_RECORD:  ffffc28c5c1af1f8 -- (.exr 0xffffc28c5c1af1f8)
ExceptionAddress: fffff800bdbd5e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  ffffc28c5c1aea10 -- (.cxr 0xffffc28c5c1aea10)
rax=ffff828daa0855e0 rbx=0000000000000000 rcx=0000000000000000
rdx=ffffc28c5c1af4c0 rsi=0000000000000003 rdi=ffff828da5781a10
rip=fffff800bdbd5e8c rsp=ffffc28c5c1af430 rbp=ffffc28c5c1af4c0
 r8=0000000000000003  r9=ffffc28c5c1af200 r10=0000000000000000
r11=0000000000000000 r12=ffffdf044338dd10 r13=0000000000000000
r14=fffff800bdbbfb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff800`bdbd5e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8006951c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
ffffc28c`5c1af430 00000000`00000000     : ffffc28c`5c1af4c0 fffff800`bdbe2bf0 ffffc28c`5c1af000 fffff800`68eec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xffffc28c5c1aea10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff804c1075e8c, The address that the exception occurred at
Arg3: fffff68d63e621f8, Exception Record Address
Arg4: fffff68d63e61a10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1531

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 8158

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 33

    Key  : Analysis.Init.CPU.mSec
    Value: 390

    Key  : Analysis.Init.Elapsed.mSec
    Value: 15340

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 94

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11484-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff804c1075e8c

BUGCHECK_P3: fffff68d63e621f8

BUGCHECK_P4: fffff68d63e61a10

EXCEPTION_RECORD:  fffff68d63e621f8 -- (.exr 0xfffff68d63e621f8)
ExceptionAddress: fffff804c1075e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  fffff68d63e61a10 -- (.cxr 0xfffff68d63e61a10)
rax=ffffe58635cc4010 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff68d63e624c0 rsi=0000000000000003 rdi=ffffe58637aeb9e0
rip=fffff804c1075e8c rsp=fffff68d63e62430 rbp=fffff68d63e624c0
 r8=0000000000000003  r9=fffff68d63e62200 r10=0000000000000000
r11=0000000000000000 r12=ffffc6074f452c90 r13=0000000000000000
r14=fffff804c105fb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff804`c1075e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8047c31c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
fffff68d`63e62430 00000000`00000000     : fffff68d`63e624c0 fffff804`c1082bf0 fffff68d`63e62000 fffff804`7bcec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xfffff68d63e61a10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80679f15e8c, The address that the exception occurred at
Arg3: fffffc8443daf1f8, Exception Record Address
Arg4: fffffc8443daea10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1562

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 6816

    Key  : Analysis.IO.Other.Mb
    Value: 7

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 32

    Key  : Analysis.Init.CPU.mSec
    Value: 374

    Key  : Analysis.Init.Elapsed.mSec
    Value: 16756

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 94

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11875-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff80679f15e8c

BUGCHECK_P3: fffffc8443daf1f8

BUGCHECK_P4: fffffc8443daea10

EXCEPTION_RECORD:  fffffc8443daf1f8 -- (.exr 0xfffffc8443daf1f8)
ExceptionAddress: fffff80679f15e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  fffffc8443daea10 -- (.cxr 0xfffffc8443daea10)
rax=ffff808a81ba2010 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffc8443daf4c0 rsi=0000000000000003 rdi=ffff808a858d19a0
rip=fffff80679f15e8c rsp=fffffc8443daf430 rbp=fffffc8443daf4c0
 r8=0000000000000003  r9=fffffc8443daf200 r10=0000000000000000
r11=0000000000000000 r12=ffffb5891280a8f0 r13=0000000000000000
r14=fffff80679effb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff806`79f15e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff80664f1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
fffffc84`43daf430 00000000`00000000     : fffffc84`43daf4c0 fffff806`79f22bf0 fffffc84`43daf000 fffff806`648ec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xfffffc8443daea10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80773595e8c, The address that the exception occurred at
Arg3: ffff9105769871f8, Exception Record Address
Arg4: ffff910576986a10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1280

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 10639

    Key  : Analysis.IO.Other.Mb
    Value: 5

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 33

    Key  : Analysis.Init.CPU.mSec
    Value: 374

    Key  : Analysis.Init.Elapsed.mSec
    Value: 11252

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 93

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11015-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff80773595e8c

BUGCHECK_P3: ffff9105769871f8

BUGCHECK_P4: ffff910576986a10

EXCEPTION_RECORD:  ffff9105769871f8 -- (.exr 0xffff9105769871f8)
ExceptionAddress: fffff80773595e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  ffff910576986a10 -- (.cxr 0xffff910576986a10)
rax=ffff8003b08b2010 rbx=0000000000000000 rcx=0000000000000000
rdx=ffff9105769874c0 rsi=0000000000000003 rdi=ffff8003b35969a0
rip=fffff80773595e8c rsp=ffff910576987430 rbp=ffff9105769874c0
 r8=0000000000000003  r9=ffff910576987200 r10=0000000000000000
r11=0000000000000000 r12=ffffb309b2311b50 r13=0000000000000000
r14=fffff8077357fb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff807`73595e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8072eb1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
ffff9105`76987430 00000000`00000000     : ffff9105`769874c0 fffff807`735a2bf0 ffff9105`76987000 fffff807`2e4ec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xffff910576986a10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------
Öncelikle merhaba. Çökmemiz sık karşılaşılan bir çökmedir. Ekran kartından veya RAM'lerden kaynaklanmadığı için şanslısınız. Gönderdiğiniz tüm minidump dosyalarını incelediğimde hepsinin aynı nedenden kaynaklandığını öğrendim.
Çökmelerimiz bozuk dosyalardan ve sürücülerden kaynaklanıyor. Hata: "amdacpafd.sys (AMD AFD Audio driver)"

techsoshataverensys.png


Laptopunuz: MSI Bravo 15 B5DD.
Laptopunuzda kurulu olan BIOS sürümünün yayınlanma tarihi: 07/04/2022
Laptopunuz için yayınlanmış olan son BIOS sürümü: 06/04/2023

techsosBIOS.png


techsosBIOS2.png


Yapmanız gerekenler:

CMD uygulamasını yönetici olarak çalıştırın ve sfc /scannow komutunu uygulayarak bozuk dosyaları onarın.

BIOS sürümünüzü güncelleyin.

Sürücülerinizi güncelleyin. (eğer nasıl yapıldığını bilmiyorsanız en basit yöntem ile açıklayayım. Windows arama kısmına "Aygıt Yöneticisi" yazıp uygulamayı açın. Ardından açılan pencerede bulunan sürücülere sağ tıklayın. Tıkladığınızda "sürücüyü güncelle" gibi bir seçenek olması lazım. Ona basın ve kolayca güncellenmesini bekleyin. İsterseniz bilgisayar parçalarına göre markaların orijinal sitelerindeki sürücüleri indirip de yapabilirsiniz.)

Eğer yardımcı olabildiysem çözüm olarak işaretlerseniz memnun kalırım. :)
 
"Aygıt Yöneticisi" yazıp uygulamayı açın. Ardından açılan pencerede bulunan sürücülere sağ tıklayın. Tıkladığınızda "sürücüyü güncelle" gibi bir seçenek olması lazım. Ona basın ve kolayca güncellenmesini bekleyin.
Bu özellik artık çalışmıyor. Ayrıca lütfen bir daha dökümleri görsel olarak paylaşma @McGucket

Dökümleri inceledim. Sorun amdacpafd.sys kaynaklı. "AMD Audio Device" ve "AMD High Definition Audio Device" adlı iki donanım nesnesini devre dışı bırakırsanız sorun çözülmeli. Tabi bu bir geçici çözüm. Kalıcı olacağına inadığım çözüm yonga seti sürücüsünü güncellemek:


Kod:
start             end                 module name
fffff807`73540000 fffff807`735a9000   amdacpafd T (no symbols)           
    Loaded symbol image file: amdacpafd.sys
    Image path: \SystemRoot\System32\DriverStore\FileRepository\amdacpafd.inf_amd64_dea03ff0fb4183f1\amdacpafd.sys
    Image name: amdacpafd.sys
    Browse all global symbols  functions  data
    Timestamp:        Fri Feb 17 01:35:01 2023 (63EEAF95)
    CheckSum:         0006F10E
    ImageSize:        00069000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Kod:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80692be5e8c, The address that the exception occurred at
Arg3: ffff9184fb2621f8, Exception Record Address
Arg4: ffff9184fb261a10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1499

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 9436

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 33

    Key  : Analysis.Init.CPU.mSec
    Value: 359

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14265

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 94

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-10375-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff80692be5e8c

BUGCHECK_P3: ffff9184fb2621f8

BUGCHECK_P4: ffff9184fb261a10

EXCEPTION_RECORD:  ffff9184fb2621f8 -- (.exr 0xffff9184fb2621f8)
ExceptionAddress: fffff80692be5e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  ffff9184fb261a10 -- (.cxr 0xffff9184fb261a10)
rax=ffffa789dd57f050 rbx=0000000000000000 rcx=0000000000000000
rdx=ffff9184fb2624c0 rsi=0000000000000003 rdi=ffffa789db6dc9d0
rip=fffff80692be5e8c rsp=ffff9184fb262430 rbp=ffff9184fb2624c0
 r8=0000000000000003  r9=ffff9184fb262200 r10=0000000000000000
r11=0000000000000000 r12=ffffb98aa5882b50 r13=0000000000000000
r14=fffff80692bcfb00 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050286
amdacpafd+0x55e8c:
fffff806`92be5e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8068051c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
ffff9184`fb262430 00000000`00000000     : ffff9184`fb2624c0 fffff806`92bf2bf0 ffff9184`fb262000 fffff806`7feec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xffff9184fb261a10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff800bdbd5e8c, The address that the exception occurred at
Arg3: ffffc28c5c1af1f8, Exception Record Address
Arg4: ffffc28c5c1aea10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1702

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 8985

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 32

    Key  : Analysis.Init.CPU.mSec
    Value: 390

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14707

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 95

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11625-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff800bdbd5e8c

BUGCHECK_P3: ffffc28c5c1af1f8

BUGCHECK_P4: ffffc28c5c1aea10

EXCEPTION_RECORD:  ffffc28c5c1af1f8 -- (.exr 0xffffc28c5c1af1f8)
ExceptionAddress: fffff800bdbd5e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  ffffc28c5c1aea10 -- (.cxr 0xffffc28c5c1aea10)
rax=ffff828daa0855e0 rbx=0000000000000000 rcx=0000000000000000
rdx=ffffc28c5c1af4c0 rsi=0000000000000003 rdi=ffff828da5781a10
rip=fffff800bdbd5e8c rsp=ffffc28c5c1af430 rbp=ffffc28c5c1af4c0
 r8=0000000000000003  r9=ffffc28c5c1af200 r10=0000000000000000
r11=0000000000000000 r12=ffffdf044338dd10 r13=0000000000000000
r14=fffff800bdbbfb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff800`bdbd5e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8006951c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
ffffc28c`5c1af430 00000000`00000000     : ffffc28c`5c1af4c0 fffff800`bdbe2bf0 ffffc28c`5c1af000 fffff800`68eec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xffffc28c5c1aea10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff804c1075e8c, The address that the exception occurred at
Arg3: fffff68d63e621f8, Exception Record Address
Arg4: fffff68d63e61a10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1531

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 8158

    Key  : Analysis.IO.Other.Mb
    Value: 6

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 33

    Key  : Analysis.Init.CPU.mSec
    Value: 390

    Key  : Analysis.Init.Elapsed.mSec
    Value: 15340

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 94

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11484-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff804c1075e8c

BUGCHECK_P3: fffff68d63e621f8

BUGCHECK_P4: fffff68d63e61a10

EXCEPTION_RECORD:  fffff68d63e621f8 -- (.exr 0xfffff68d63e621f8)
ExceptionAddress: fffff804c1075e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  fffff68d63e61a10 -- (.cxr 0xfffff68d63e61a10)
rax=ffffe58635cc4010 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff68d63e624c0 rsi=0000000000000003 rdi=ffffe58637aeb9e0
rip=fffff804c1075e8c rsp=fffff68d63e62430 rbp=fffff68d63e624c0
 r8=0000000000000003  r9=fffff68d63e62200 r10=0000000000000000
r11=0000000000000000 r12=ffffc6074f452c90 r13=0000000000000000
r14=fffff804c105fb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff804`c1075e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8047c31c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
fffff68d`63e62430 00000000`00000000     : fffff68d`63e624c0 fffff804`c1082bf0 fffff68d`63e62000 fffff804`7bcec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xfffff68d63e61a10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80679f15e8c, The address that the exception occurred at
Arg3: fffffc8443daf1f8, Exception Record Address
Arg4: fffffc8443daea10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1562

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 6816

    Key  : Analysis.IO.Other.Mb
    Value: 7

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 32

    Key  : Analysis.Init.CPU.mSec
    Value: 374

    Key  : Analysis.Init.Elapsed.mSec
    Value: 16756

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 94

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11875-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff80679f15e8c

BUGCHECK_P3: fffffc8443daf1f8

BUGCHECK_P4: fffffc8443daea10

EXCEPTION_RECORD:  fffffc8443daf1f8 -- (.exr 0xfffffc8443daf1f8)
ExceptionAddress: fffff80679f15e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  fffffc8443daea10 -- (.cxr 0xfffffc8443daea10)
rax=ffff808a81ba2010 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffc8443daf4c0 rsi=0000000000000003 rdi=ffff808a858d19a0
rip=fffff80679f15e8c rsp=fffffc8443daf430 rbp=fffffc8443daf4c0
 r8=0000000000000003  r9=fffffc8443daf200 r10=0000000000000000
r11=0000000000000000 r12=ffffb5891280a8f0 r13=0000000000000000
r14=fffff80679effb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff806`79f15e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff80664f1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
fffffc84`43daf430 00000000`00000000     : fffffc84`43daf4c0 fffff806`79f22bf0 fffffc84`43daf000 fffff806`648ec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xfffffc8443daea10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80773595e8c, The address that the exception occurred at
Arg3: ffff9105769871f8, Exception Record Address
Arg4: ffff910576986a10, Context Record Address

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for amdacpafd.sys

KEY_VALUES_STRING: 1

    Key  : AV.Dereference
    Value: NullClassPtr

    Key  : AV.Fault
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 1280

    Key  : Analysis.DebugAnalysisManager
    Value: Create

    Key  : Analysis.Elapsed.mSec
    Value: 10639

    Key  : Analysis.IO.Other.Mb
    Value: 5

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 33

    Key  : Analysis.Init.CPU.mSec
    Value: 374

    Key  : Analysis.Init.Elapsed.mSec
    Value: 11252

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 93

    Key  : Bugcheck.Code.DumpHeader
    Value: 0x1000007e

    Key  : Bugcheck.Code.Register
    Value: 0x7e

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Timestamp
    Value: 2022-05-06T12:50:00Z

    Key  : WER.OS.Version
    Value: 10.0.22621.1


FILE_IN_CAB:  041623-11015-01.dmp

TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b


BUGCHECK_CODE:  7e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff80773595e8c

BUGCHECK_P3: ffff9105769871f8

BUGCHECK_P4: ffff910576986a10

EXCEPTION_RECORD:  ffff9105769871f8 -- (.exr 0xffff9105769871f8)
ExceptionAddress: fffff80773595e8c (amdacpafd+0x0000000000055e8c)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000000002a8
Attempt to write to address 00000000000002a8

CONTEXT:  ffff910576986a10 -- (.cxr 0xffff910576986a10)
rax=ffff8003b08b2010 rbx=0000000000000000 rcx=0000000000000000
rdx=ffff9105769874c0 rsi=0000000000000003 rdi=ffff8003b35969a0
rip=fffff80773595e8c rsp=ffff910576987430 rbp=ffff9105769874c0
 r8=0000000000000003  r9=ffff910576987200 r10=0000000000000000
r11=0000000000000000 r12=ffffb309b2311b50 r13=0000000000000000
r14=fffff8077357fb00 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00050282
amdacpafd+0x55e8c:
fffff807`73595e8c 4c89a9a8020000  mov     qword ptr [rcx+2A8h],r13 ds:002b:00000000`000002a8=????????????????
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

WRITE_ADDRESS: fffff8072eb1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 00000000000002a8

ERROR_CODE: (NTSTATUS) 0xc0000005 - 0x%p adresindeki y nerge 0x%p adresindeki belle e ba vurdu. Bellek  u olamaz %s.

EXCEPTION_CODE_STR:  c0000005

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000000002a8

EXCEPTION_STR:  0xc0000005

STACK_TEXT: 
ffff9105`76987430 00000000`00000000     : ffff9105`769874c0 fffff807`735a2bf0 ffff9105`76987000 fffff807`2e4ec800 : amdacpafd+0x55e8c


SYMBOL_NAME:  amdacpafd+55e8c

MODULE_NAME: amdacpafd

IMAGE_NAME:  amdacpafd.sys

STACK_COMMAND:  .cxr 0xffff910576986a10 ; kb

BUCKET_ID_FUNC_OFFSET:  55e8c

FAILURE_BUCKET_ID:  AV_amdacpafd!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {10a8f5e6-372e-de06-32e1-f8b4b00e3064}

Followup:     MachineOwner
---------
 
Çözüm

Yeni konular

Geri
Yukarı