Çözüldü Anakart değişimi sonrası mavi ekran

aahmety · 31 Mayıs 2013

Foruma yeni üye oldum yardımcı olacak tüm arkadaşlara şimdiden teşekkür ederim.

Anakartımın bozulmasından sonra AsRock N68C-GS FX modelde anakart aldım ve sistem takıldı tüm güncellemeler yapıldı format atıldı kullanıma hazır hale getirildi.

Ancak tv de takılı olan Avermedia tv kartıyla tv izlerken IRQL NOT LESS OR EQUAL hatası aldım ve pc resetlendi. Çözüm olarak tv kartını çıkarttım ancak sorunlar bitmedi.
Daha sonra oyun oynarken DRİVER IRQL NOT LESS OR EQUAL hatası almaya başladım. Malesef neler denediysem bu hata geçmedi.
Şimdilerde ise nette gezerken PAGE NOT FAULT NONPAGED AREA hatası alıyorum.

Birçok forum gezdim sorunun RAM kaynaklı olabileceği söylendi bunun üzerine bir arkadaşımla ramleri değiştim ancak hala sorun devam etmekte.

Ardından memtest86+-4.20 programı ile tarama yaptım fakat ramlerde sorun çıkmadı.

Aldığım hataları dump.rar — RGhost — Dosya paylaşımı adresine attım. Anakartım değiştikten beri yaklaşık 1,5 aydır verimli olarak kullanım yapamıyorum yardımlarınızı bekliyorum.

Sistem bilgilerim:

İşlemci : Amd atlon 64x2 Dual core 4600+ 2.41 ghz
Anakart: Asrock N68C-GS FX
Ram : 2,00gb 633 mhz ddr2
Ekran kartı: HIS amd radeon hd 6850
İşletim sistemi: Windows 7 ultimate yapı 7601

Murat5038 · 31 Mayıs 2013

Format atmadı ise format atıp O kartı takmayın bir daha.
Hataların çoğunluğunu o kart oluşturuyor. Ek olarak İmzamda ki Kaspersky IS indirip güncelleyip fullscan yapın, Sonra Altta vereceğim linkden biosunu güncelle.
http://europe.asrock.com/downloadsite/bios/AM3+/N68C-GS FX(1.40)WIN.zip
Güncelledikden sonra biosu default yapıp savelemeyi unutma.
Sonra bunu yükle:
http://www.viaarena.com/Driver/v10_1200a.zip
http://download.hightech.com.hk/driver/20130529_1307/Vista_12.104-130328a-157485C-ATI.zip
Bunlar Win7 32 bit içindir.
Bu verdiğim driverleri Formattan sonra yap biosu formattan önce güncelle.
HDTUNE ile error scan testi de yapsan iyi olur formattan önce ve test Sonucunu burda paylaş.

aahmety · 31 Mayıs 2013

Murat5038 dedi:
Format atmadı ise format atıp O kartı takmayın bir daha.
Hataların çoğunluğunu o kart oluşturuyor. Ek olarak İmzamda ki Kaspersky IS indirip güncelleyip fullscan yapın, Sonra Altta vereceğim linkden biosunu güncelle.
http://europe.asrock.com/downloadsite/bios/AM3+/N68C-GS FX(1.40)WIN.zip
Güncelledikden sonra biosu default yapıp savelemeyi unutma.
Sonra bunu yükle:
http://us.download.nvidia.com/Windo...ce_winvista_win7_32bit_international_whql.exe
http://www.viaarena.com/Driver/v10_1200a.zip
Bunlar Win7 32 bit içindir.
Bu verdiğim driverleri Formattan sonra yap biosu formattan önce güncelle.
HDTUNE ile error scan testi de yapsan iyi olur formattan önce ve test Sonucunu burda paylaş.

O kartı takmayın dediğiniz tv kartıysa zaten kullanımda değil. Ayrıca Asrocktan tüm güncellemeleri yaptım ancak sizinkini yinede kuracağım. Diğer uygulamaları en kısa sürede tamamlayıp burda paylaşacağım sonucu. Teşekkür ederim iyi forumlar

Recep Baltaş · 31 Mayıs 2013

Anakart değişimi sonrası format atmak şarttır. Windows 8 64 Bit kurdunuz ve sorun çözüldü:

https://www.technopat.net/forum/windows-8/9708-windows-8-turkce-indirme-baglantilari.html

Burak Alkan · 31 Mayıs 2013

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntkrnlpa.exe

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x000000d1 (0x83737c86, 0x000000ff, 0x00000008, 0x83737c86)

*** ntkrnlpa.exe - Address 0x82e4dc9b base at 0x82e0d000 DateStamp 0x5147d331

Kod:

*** STOP: 0x000000d1 (0x8367bc86, 0x000000ff, 0x00000008, 0x8367bc86)

*** halmacpi.dll - Address 0x83219902 base at 0x83216000 DateStamp 0x4ce788d2

Kod:

*** STOP: 0x000000d1 (0x807f3e28, 0x00000002, 0x00000000, 0x8e749cfa)

*** USBPORT.SYS - Address 0x8e749cfa base at 0x8e742000 DateStamp 0x4d8c06ae

Kod:

*** STOP: 0x000000d1 (0x83ff6f86, 0x000000ff, 0x00000008, 0x83ff6f86)

*** ntkrnlpa.exe - Address 0x82e60abb base at 0x82e1b000 DateStamp 0x5147d3b2

Kod:

*** STOP: 0x000000d1 (0x00000000, 0x00000002, 0x00000000, 0x8ed5b145)

*** USBPORT.SYS - Address 0x8ed5b145 base at 0x8ed5a000 DateStamp 0x4d8c06ae

Kod:

*** STOP: 0x000000d1 (0x833dac86, 0x000000ff, 0x00000008, 0x833dac86)

*** ntkrnlpa.exe - Address 0x82e4aabb base at 0x82e05000 DateStamp 0x5147d3b2

Kod:

*** STOP: 0x000000d1 (0x835f4c86, 0x000000ff, 0x00000008, 0x835f4c86)

*** ntkrnlpa.exe - Address 0x82c54abb base at 0x82c0f000 DateStamp 0x5147d3b2

Kod:

*** STOP: 0x000000d1 (0x834b6c86, 0x000000ff, 0x00000008, 0x834b6c86)

*** ntkrnlpa.exe - Address 0x82c46abb base at 0x82c01000 DateStamp 0x5147d3b2

Kod:

*** STOP: 0x000000d1 (0x5dab3b7f, 0x000000ff, 0x00000008, 0x5dab3b7f)

*** AVerA706.sys - Address 0x8fc9f452 base at 0x8fc35000 DateStamp 0x4a2f8a4a

Kod:

*** STOP: 0x000000d1 (0x83067e86, 0x000000ff, 0x00000008, 0x83067e86)

*** AVerA706.sys - Address 0x8ec22ae1 base at 0x8ec0f000 DateStamp 0x4a2f8a4a

Kod:

*** STOP: 0x000000d1 (0x8315fe86, 0x000000ff, 0x00000008, 0x8315fe86)

*** ntkrnlpa.exe - Address 0x82c4ab6b base at 0x82c05000 DateStamp 0x50e794c7

Kod:

*** STOP: 0x000000d1 (0x807eff6c, 0x00000006, 0x00000000, 0x88f3ee88)

*** nvstor32.sys - Address 0x88f3ee88 base at 0x88f30000 DateStamp 0x4a4aab0a

Kod:

*** STOP: 0x000000d1 (0x83cb4c86, 0x000000ff, 0x00000008, 0x83cb4c86)

*** ntkrnlpa.exe - Address 0x82c64b6b base at 0x82c1f000 DateStamp 0x50e794c7

Kod:

*** STOP: 0x000000d1 (0x0000001c, 0x000000ff, 0x00000001, 0x83e33c86)

*** ntkrnlpa.exe - Address 0x82c63b6b base at 0x82c1e000 DateStamp 0x50e794c7

Kod:

*** STOP: 0x000000d1 (0x8397fe86, 0x000000ff, 0x00000008, 0x8397fe86)

*** halmacpi.dll - Address 0x8302792d base at 0x83024000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x000000d1 (0x0000001c, 0x000000ff, 0x00000001, 0x8336ae86)

*** Wdf01000.sys - Address 0x8336ae86 base at 0x8334c000 DateStamp 0x5010ac41

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntkrnlpa.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0x0000001c, 0x000000ff, 0x00000001, 0x82f7fd86)

*** ntkrnlpa.exe - Address 0x82e81c9b base at 0x82e41000 DateStamp 0x5147d331

Kod:

*** STOP: 0x0000000a (0x0000001c, 0x000000ff, 0x00000001, 0x82f3fc86)

*** ntkrnlpa.exe - Address 0x82e7ac9b base at 0x82e3a000 DateStamp 0x5147d331

Kod:

*** STOP: 0x0000000a (0xfffffffb, 0x00000002, 0x00000000, 0x82e80a98)

*** dxgmms1.sys - Address 0x8f0fe83b base at 0x8f0f1000 DateStamp 0x4d4a24c1

Kod:

*** STOP: 0x0000000a (0x82e2fc86, 0x000000ff, 0x00000008, 0x82e2fc86)

*** halmacpi.dll - Address 0x82e2fc86 base at 0x82e0a000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x80ff1c7c, 0x00000002, 0x00000001, 0x82e1face)

*** halmacpi.dll - Address 0x82e1face base at 0x82e14000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x80ff2c7c, 0x00000002, 0x00000001, 0x82e13ace)

*** halmacpi.dll - Address 0x82e13ace base at 0x82e08000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0xe0db7a1f, 0x000000ff, 0x00000000, 0x82e5dd97)

*** ntkrnlpa.exe - Address 0x82e94abb base at 0x82e4f000 DateStamp 0x5147d3b2

Kod:

*** STOP: 0x0000000a (0x80ff2c7c, 0x00000002, 0x00000001, 0x83220ace)

*** halmacpi.dll - Address 0x83220ace base at 0x83215000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x82fdff86, 0x000000ff, 0x00000008, 0x82fdff86)

*** ntkrnlpa.exe - Address 0x82e95abb base at 0x82e50000 DateStamp 0x5147d3b2

Kod:

*** STOP: 0x0000000a (0x82e3dd86, 0x000000ff, 0x00000008, 0x82e3dd86)

*** halmacpi.dll - Address 0x82e3dd86 base at 0x82e08000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x80ffff7c, 0x00000002, 0x00000001, 0x83230ace)

*** halmacpi.dll - Address 0x83230ace base at 0x83225000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x80ffff7c, 0x00000002, 0x00000001, 0x83230ace)

*** halmacpi.dll - Address 0x83230ace base at 0x83225000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x82fd5e86, 0x000000ff, 0x00000008, 0x82fd5e86)

*** ntkrnlpa.exe - Address 0x82e88abb base at 0x82e43000 DateStamp 0x5147d3b2

Kod:

*** STOP: 0x0000000a (0x80ffff7c, 0x00000002, 0x00000001, 0x82e0cace)

*** halmacpi.dll - Address 0x82e0cace base at 0x82e01000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x8bfe9444, 0x00000006, 0x00000000, 0x82c3e21c)

*** dxgkrnl.sys - Address 0x93433bf5 base at 0x93432000 DateStamp 0x4ccf7981

Kod:

*** STOP: 0x0000000a (0x80ffff7c, 0x00000002, 0x00000001, 0x82c1face)

*** halmacpi.dll - Address 0x82c1face base at 0x82c14000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x057adf13, 0x000000ff, 0x00000001, 0x82dd8cc0)

*** ntkrnlpa.exe - Address 0x82c8fb6b base at 0x82c4a000 DateStamp 0x50e794c7

Kod:

*** STOP: 0x0000000a (0x0000001c, 0x000000ff, 0x00000000, 0x82cf92b1)

*** AVerA706.sys - Address 0x8e82fae1 base at 0x8e81c000 DateStamp 0x4a2f8a4a

Kod:

*** STOP: 0x0000000a (0x80ff2c7c, 0x00000002, 0x00000001, 0x82c10ace)

*** halmacpi.dll - Address 0x82c10ace base at 0x82c05000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x80ffff7c, 0x00000002, 0x00000001, 0x82c1aace)

*** halmacpi.dll - Address 0x82c1aace base at 0x82c0f000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x82fd7c86, 0x000000ff, 0x00000008, 0x82fd7c86)

*** ntkrnlpa.exe - Address 0x82c8eb6b base at 0x82c49000 DateStamp 0x50e794c7

Kod:

*** STOP: 0x0000000a (0x80ff2c7c, 0x00000002, 0x00000001, 0x82c26ace)

*** halmacpi.dll - Address 0x82c26ace base at 0x82c1b000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x0000001c, 0x000000ff, 0x00000001, 0x82d1fd86)

*** AVerA706.sys - Address 0x8e6a9fb7 base at 0x8e695000 DateStamp 0x4bbdbb76

Kod:

*** STOP: 0x0000000a (0x9613130b, 0x000000ff, 0x00000001, 0x82cff016)

*** ntkrnlpa.exe - Address 0x82c5582b base at 0x82c0f000 DateStamp 0x4f790f9a

Kod:

*** STOP: 0x0000000a (0x80ffff7c, 0x00000002, 0x00000001, 0x83026ace)

*** halmacpi.dll - Address 0x83026ace base at 0x8301b000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x0000000a (0x00000000, 0x00000002, 0x00000001, 0x82c7cd5e)

*** ntkrnlpa.exe - Address 0x82c5982b base at 0x82c13000 DateStamp 0x4f790f9a

Kod:

*** STOP: 0x0000000a (0x82fa3c86, 0x000000ff, 0x00000008, 0x82fa3c86)

*** ntkrnlpa.exe - Address 0x82c9b82b base at 0x82c55000 DateStamp 0x4f790f9a

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: halmacpi.dll

KERNEL_MODE_EXCEPTION_NOT_HANDLED

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x1000008e (0xc0000005, 0x82ee3cdc, 0x974e3b58, 0x00000000)

*** halmacpi.dll - Address 0x83026ba9 base at 0x83021000 DateStamp 0x4a5bbf07

Kod:

*** STOP: 0x1000008e (0xc0000005, 0x82f7fdda, 0x98b6bb58, 0x00000000)

*** halmacpi.dll - Address 0x83020ba9 base at 0x8301b000 DateStamp 0x4a5bbf07

Kod:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntkrnlpa.exe

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x00000050 (0x832dbba0, 0x00000008, 0x832dbba0, 0x00000000)

*** ntkrnlpa.exe - Address 0x82e9086f base at 0x82e03000 DateStamp 0x5147d331

Kod:

*** STOP: 0x00000050 (0x833730c0, 0x00000008, 0x833730c0, 0x00000000)

*** ntkrnlpa.exe - Address 0x82ed786f base at 0x82e4a000 DateStamp 0x5147d331

aahmety · 31 Mayıs 2013

Recep Baltaş dedi:
Anakart değişimi sonrası format atmak şarttır. Windows 8 64 Bit kurdunuz ve sorun çözüldü:

https://www.technopat.net/forum/windows-8/9708-windows-8-turkce-indirme-baglantilari.html

Anakartı değiştirdikten sonra zaten format atma işlemini yapmıştım. Ayrıca sistemim 32 bit yani win8 32 bit kurunca sorunum çözülecek mi tam olarak anlamadım. Zira sorun çözüldü demişsiniz ancak hala devam etmekte.

Recep Baltaş · 31 Mayıs 2013

64 Bit Windows 8 kurun ve ardından hiçbir sürücü kurmayın. Kuracağınız sürücüleri söyleyin, ben size güncel sürümlerini vereceğim.

aahmety · 9 Haziran 2013

İyi forumlar söylediğiniz gibi pcye format atarak win 8 64 bit kurdum ve hiçbir sürücü kurmadım. Size pcdeki donanımları gösterecek bir program varsa bu şekilde donanım listesini göndermek istiyorum. Bu şekilde güncel sürücüleri gönderebilirsiniz. Şimdiden teşekkür ederim iyi forumlar.

son_goku · 9 Haziran 2013

AIDA64'ü kurun ve ekran alıntısını buraya aktarın.

Burak Alkan · 9 Haziran 2013

Veya:

https://www.technopat.net/forum/aygit-suruculeri/13029-technopat-driver-guncelleme-hizmeti.html

Çözüldü Anakart değişimi sonrası mavi ekran

Ayrıntılı düzenleme

aahmety

Hectopat

Murat5038

Yottapat!

aahmety

Hectopat

Recep Baltaş

Technopat

Burak Alkan

Megapat

aahmety

Hectopat

Recep Baltaş

Technopat

aahmety

Hectopat

son_goku

Kilopat

Burak Alkan

Megapat

Benzer konular

Technopat Haberler

Yeni konular

Yeni mesajlar

Gizliliğinize önem veriyoruz