Driver_power_state_failure

Katılım
14 Ağustos 2010
Mesajlar
79.065
Makaleler
287
Çözümler
2.269
Yer
İstanbul
Genelde uyumsuz bir sürücü yüklediğinde DRIVER_POWER_STATE_FAILURE mavi ekran hatası alabilirsiniz.

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


DRIVER_POWER_STATE_FAILURE


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000009f (0x0000000000000003, 0xfffffa8017bbc3c0, 0xfffff88002e2b7e0, 
0xfffffa800e9d63d0)


*** ntoskrnl.exe - Address 0xfffff80148300340 base at 0xfffff80148285000 DateStamp 
0x50ab0e64

Sorunu çözmek için söz konusu sürücüyü güncelleştirebilirsiniz.
 
Uyarı! Bu konu 13 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Technopat Haberler

Yeni konular

Geri
Yukarı