Gigabyte kullanıyorsan ben Reddit de bir konu bulmuştum birisi anlatmıştı. Ona özelden yazdım. Onu atayım dediklerini yap. Ben denedim. İngilizce yazıyor fakat çevirip bakabilirsin. Bana yazdığını aynen alıntılıyorum.
Hey! I've had the same issues, both heating and crashing.
You however have an MSI motherboard, so ı can't Direct you exactly to where it is on your motherboard, but with my settings and a bit of looking around in your BIOS you should be able to find it and fix it!
I'm going to copy pasta the explanation ı've given others so you'll have to read it carefully, but it should be the solution to your problems! Allright, ı checked my settings ETC, in the BIOS you want to GO to the tweaker Tab if you're on the main BIOS screen, press F2 on your keyboard to get in to the Advanced stuff Inside the tweaker Tab, scroll down to active Turbo ratios and set these to manual once you enable manual you should see 1 p-Core and 2 p-Core, they're probably set to 60 (6.0GHz), you want to set these to 57 (5.7GHz), that's going to limit the CPU from throttling to 6GHz which these motherboards don't Support'in combination with this RAM then, after that you scroll down even further until you find the Turbo Power limits, then, set the TDP limit 1 (watts) to 253W, do the same for limit 2 (watts) then you can run your Computer and assuming you have good airflow and good cooling your PC should be running super stable now and you can totally push the CPU how much you like if you're feeling funky you can set those Power limits to 300W (which ı have done), ı GoT just a little bit higher score in benchmarking and my Games seemed to have less like weird Micro stuttering, however do Note that ı did have 1 or 2 crashes in the past 5-6 weeks so might not be 100% stable at least with the base 253W it should be super stable and you should be able to finally enjoy your System! Also make sure btw that XMP1 is enabled for your RAM so it's running at Max Speed this should help you out, good luck and let me know if it helped!
Burada yazanları uygularsan çözülecektir diye umuyorum. Voltaj yetersiz geliyor bazıları RAM voltajı ile oynuyor. Fakat sorun RAM de değil anakartın işlemci OC ayarlarında.
57 (5.7GHz) yerine 58 (5.8GHz) deneyebilirsin. 300W olarak başla baktın sistem kararsız. Yavaştan düşürürsün 57 çekip 253W yaparsın filan.
Gigabyte kullanıyorum ve sanırım Vcore offset değiştirmem gerekiyor, doğru mudur?
