Dün başka bir sorunu çözmeye uğraşıyordum. Grafik kartı sürücüsünü falan güncelledim bugün falan.
Az önce YouTube üzerinde video izlerken bir anda mavi ekran verdi sistem. Bu sorun neden kaynaklıdır acaba?
chipset driver güncel, ekran kartı driver güncel, BIOS güncel.
[CODE title="minidump"]IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an.
interrupt request level (IRQL) that is too high. This is usually.
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced.
Arg2: 0000000000000002, IRQL.
Arg3: 0000000000000008, bitfield :
bit 0 : value 0 = read operation, 1 = write operation.
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80214272c4a, address which referenced memory.
Debugging Details:
------------------
KEY_VALUES_STRING: 1
Key : Analysis.CPU.mSec
Value: 4171.
Key : Analysis.DebugAnalysisManager
Value: Create.
Key : Analysis.Elapsed.mSec
Value: 4162.
Key : Analysis.Init.CPU.mSec
Value: 296.
Key : Analysis.Init.Elapsed.mSec
Value: 3818.
Key : Analysis.Memory.CommitPeak.Mb
Value: 72.
Key : WER.OS.Branch
Value: vb_release.
Key : WER.OS.Timestamp
Value: 2019-12-06T14:06:00Z
Key : WER.OS.Version
Value: 10.0.19041.1
BUGCHECK_CODE: a
BUGCHECK_P1: 0
BUGCHECK_P2: 2
BUGCHECK_P3: 8
BUGCHECK_P4: fffff80214272c4a.
READ_ADDRESS: fffff802148fa390: Unable to get MiVisibleState.
Unable to get NonPagedPoolStart.
Unable to get NonPagedPoolEnd.
Unable to get PagedPoolStart.
Unable to get PagedPoolEnd.
unable to get nt!MmSpecialPagesInUse
0000000000000000.
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXPNP: 1 (!blackboxpnp)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: nvsphelper64.exe
TRAP_FRAME: ffff890a2ef17860 -- (.trap 0xffff890a2ef17860)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000c0000008 rbx=0000000000000000 rcx=ffffc38bb2021080
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80214272c4a rsp=ffff890a2ef179f0 rbp=0000000000000000
r8=ffffc38b9f2b9e80 r9=ffffd48988620b40 r10=0000000000000000
r11=ffffffffffffffff r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc.
nt!NtSetEvent+0xda:
fffff802`14272c4a 8bc3 mov eax,ebx
Resetting default scope.
STACK_TEXT:
ffff890a`2ef17718 fffff802`14009169 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffff890a`2ef17720 fffff802`14005469 : 00000000`000001f4 00000000`000001f8 00000000`00000200 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffff890a`2ef17860 fffff802`14272c4a : 00000000`00000000 00000000`00000000 00000000`00000082 00000000`c0000008 : nt!KiPageFault+0x469
ffff890a`2ef179f0 ffff890a`2ef17b80 : 00000000`00000000 fffff802`14272af7 00000000`00000000 00000000`00000001 : nt!NtSetEvent+0xda
ffff890a`2ef17a60 00000000`00000000 : fffff802`14272af7 00000000`00000000 00000000`00000001 ffff890a`00000002 : 0xffff890a`2ef17b80
SYMBOL_NAME: nt!NtSetEvent+da
MODULE_NAME: nt.
IMAGE_NAME: ntkrnlmp.exe
IMAGE_VERSION: 10.0.19041.1237
STACK_COMMAND: .thread ; .cxr ; kb.
BUCKET_ID_FUNC_OFFSET: da.
FAILURE_BUCKET_ID: AV_nt!NtSetEvent
OS_VERSION: 10.0.19041.1
BUILDLAB_STR: vb_release.
OSPLATFORM_TYPE: x64.
OSNAME: Windows 10.
FAILURE_ID_HASH: {f272d0e6-f83a-1680-790a-ed0afa67b022}
Followup: MachineOwner[/CODE]
**Sistem: Lenovo Ideapad Gaming 3 (4800H - 1650 Ti - 16 GB RAM)
Önce Windows 10 kendisi driver kurdu ekran kartı için, ben de sonra GeForce Experience ile son sürüm driver yukledim. Üst üste binen driver falan böyle sorun yapar mı?
Az önce YouTube üzerinde video izlerken bir anda mavi ekran verdi sistem. Bu sorun neden kaynaklıdır acaba?
chipset driver güncel, ekran kartı driver güncel, BIOS güncel.
[CODE title="minidump"]IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an.
interrupt request level (IRQL) that is too high. This is usually.
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced.
Arg2: 0000000000000002, IRQL.
Arg3: 0000000000000008, bitfield :
bit 0 : value 0 = read operation, 1 = write operation.
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80214272c4a, address which referenced memory.
Debugging Details:
------------------
KEY_VALUES_STRING: 1
Key : Analysis.CPU.mSec
Value: 4171.
Key : Analysis.DebugAnalysisManager
Value: Create.
Key : Analysis.Elapsed.mSec
Value: 4162.
Key : Analysis.Init.CPU.mSec
Value: 296.
Key : Analysis.Init.Elapsed.mSec
Value: 3818.
Key : Analysis.Memory.CommitPeak.Mb
Value: 72.
Key : WER.OS.Branch
Value: vb_release.
Key : WER.OS.Timestamp
Value: 2019-12-06T14:06:00Z
Key : WER.OS.Version
Value: 10.0.19041.1
BUGCHECK_CODE: a
BUGCHECK_P1: 0
BUGCHECK_P2: 2
BUGCHECK_P3: 8
BUGCHECK_P4: fffff80214272c4a.
READ_ADDRESS: fffff802148fa390: Unable to get MiVisibleState.
Unable to get NonPagedPoolStart.
Unable to get NonPagedPoolEnd.
Unable to get PagedPoolStart.
Unable to get PagedPoolEnd.
unable to get nt!MmSpecialPagesInUse
0000000000000000.
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXPNP: 1 (!blackboxpnp)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: nvsphelper64.exe
TRAP_FRAME: ffff890a2ef17860 -- (.trap 0xffff890a2ef17860)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000c0000008 rbx=0000000000000000 rcx=ffffc38bb2021080
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80214272c4a rsp=ffff890a2ef179f0 rbp=0000000000000000
r8=ffffc38b9f2b9e80 r9=ffffd48988620b40 r10=0000000000000000
r11=ffffffffffffffff r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc.
nt!NtSetEvent+0xda:
fffff802`14272c4a 8bc3 mov eax,ebx
Resetting default scope.
STACK_TEXT:
ffff890a`2ef17718 fffff802`14009169 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffff890a`2ef17720 fffff802`14005469 : 00000000`000001f4 00000000`000001f8 00000000`00000200 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffff890a`2ef17860 fffff802`14272c4a : 00000000`00000000 00000000`00000000 00000000`00000082 00000000`c0000008 : nt!KiPageFault+0x469
ffff890a`2ef179f0 ffff890a`2ef17b80 : 00000000`00000000 fffff802`14272af7 00000000`00000000 00000000`00000001 : nt!NtSetEvent+0xda
ffff890a`2ef17a60 00000000`00000000 : fffff802`14272af7 00000000`00000000 00000000`00000001 ffff890a`00000002 : 0xffff890a`2ef17b80
SYMBOL_NAME: nt!NtSetEvent+da
MODULE_NAME: nt.
IMAGE_NAME: ntkrnlmp.exe
IMAGE_VERSION: 10.0.19041.1237
STACK_COMMAND: .thread ; .cxr ; kb.
BUCKET_ID_FUNC_OFFSET: da.
FAILURE_BUCKET_ID: AV_nt!NtSetEvent
OS_VERSION: 10.0.19041.1
BUILDLAB_STR: vb_release.
OSPLATFORM_TYPE: x64.
OSNAME: Windows 10.
FAILURE_ID_HASH: {f272d0e6-f83a-1680-790a-ed0afa67b022}
Followup: MachineOwner[/CODE]
**Sistem: Lenovo Ideapad Gaming 3 (4800H - 1650 Ti - 16 GB RAM)
Önce Windows 10 kendisi driver kurdu ekran kartı için, ben de sonra GeForce Experience ile son sürüm driver yukledim. Üst üste binen driver falan böyle sorun yapar mı?
Son düzenleme: