Çözüldü Linux Mint 6600 XT sürücü sorunu

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.

Voyndex

Kilopat
Katılım
3 Temmuz 2014
Mesajlar
136
Çözümler
1
Daha fazla  
Cinsiyet
Erkek
Arkadaşlar merhaba. Linux Mint yeni başladım, kendimi geliştirmek amacıyla kullanıyorum. Radeon 6600XT model ekran kartı sürücüsü otomatik yüklenmedi. İşletim sistemini başlattığım zaman sağ üstte grafik sürücüsü yüklememi söylüyor. Tıkladığımda sürücüleri tarayıp eksik sürücü bulunmadığını söylüyor. Ben de AMD'nin kendi sitesine girip manuel olarak indirdim zaten Debian formatında geliyor. Kurdum, kurulduğunu söyledi ancak bilgisayarı açtığımda sağ üstte tekrar grafik sürücüsü yüklememi söylüyor. Çift monitörüm var iki monitor kullanamıyorum. Ana monitörüm 144Hz 93 Hz değerinde çalıştırıyor. Anladığım kadarıyla sürücü yüklenmemiş veya eksik ben bu eski sürücüyü nasıl kaldırabilirim ve doğru bir şekilde GPU sürücüsü kurarım?
 
Çözüm
Kurulumdan sonra driver düzgün çalışmadığı için, manuel olarak kurulum yaptım, biraz kurcaladım. Ancak formatlayıp 2 kez tüm güncellemeleri yapsam da kendiliğinden düzelmedi, sonrasında manuel kurulum yaptım.

Ne yaptın peki, manuel kurulumdan kastın nedir? Ayrıntılı bilgi vermen gerekiyor, şu an ki durum normal değil.

İstersen yeniden kurulum yapıp, aşağıdaki komutların çıktısını paylaş.

Kod:
inxi -SGxx

Şu ISO dosyası ile kurulum yaparsın.

Aşağıdaki komutları uçbirimde çalıştırın ve bunların üreteceği çıktıları foruma yapıştırıp paylaşın.

Kod:
dkms status
inxi -Gxx
dpkg - l | grep amdgpu

Radeon 6600XT model ekran kartı sürücüsü otomatik yüklenmedi.

AMD sürücüleri otomatik yüklenir, aslında ek bir sürücü kurmaya gerek yoktu.
 
Son düzenleme:
Aşağıdaki komutları uçbirimde çalıştırın ve bunların üreteceği çıktıları foruma yapıştırıp paylaşın.

Kod:
dkms status.
inxi -Gxx
dpkg - | grep amdgpu

AMD sürücüleri otomatik yüklenir, aslında ek bir sürücü kurmaya gerek yoktu.

1649235659907.png

Başlattığımda sağ üstte uyarı çıkıyor 2 kez format attım ancak olmadı. Monitör Hz. değerleri de 93 üzerine çıkmıyor. 2. monitörümü görmüyor.
Aşağıdaki komutları uçbirimde çalıştırın ve bunların üreteceği çıktıları foruma yapıştırıp paylaşın.

Kod:
dkms status
inxi -Gxx
dpkg - | grep amdgpu



AMD sürücüleri otomatik yüklenir, aslında ek bir sürücü kurmaya gerek yoktu.
Kod:
voyndex@voyndex-Linux:~$ dkms status
voyndex@voyndex-Linux:~$ inxi -Gxx
Graphics:
  Device-1: AMD driver: N/A bus ID: 2d:00.0 chip ID: 1002:73ff
  Display: x11 server: X.Org 1.20.13 driver: fbdev
  unloaded: modesetting,vesa alternate: ati resolution: 2560x1440~93Hz
  OpenGL: renderer: llvmpipe (LLVM 12.0.0 256 bits) v: 4.5 Mesa 21.2.6
  compat-v: 3.1 direct render: Yes
voyndex@voyndex-Linux:~$ dpkg - | grep amdgpu
dpkg: hata: bir eylem seçeneği belirtilmesi gerekiyor

Paket kurma ve kaldırma hakkında yardım almak için dpkg --help yazın [*];
Kullanıcı dostu paket yönetimi için 'apt' veya 'aptitude' araçlarını kullanın;
dpkg ile kullanabileceğiniz hata ayıklama bayraklarının listesini görmek için
dpkg -Dhelp yazın;
Zorlama seçeneklerinin listesini görmek için dpkg --force-help yazın;
*.deb dosyalarını değiştirme hakkında bilgi almak için dpkg-deb --help yazın;

[*] ile işaretlenmiş komutlar çok miktarda çıktı üretir - 'less' ya da
'more' araçları ile birlikte kullanın !
Aşağıdaki komutları uçbirimde çalıştırın ve bunların üreteceği çıktıları foruma yapıştırıp paylaşın.

Kod:
dkms status.
inxi -Gxx
dpkg - l | grep amdgpu

AMD sürücüleri otomatik yüklenir, aslında ek bir sürücü kurmaya gerek yoktu.

Sürücü denetlediğim zaman ise "bilgisayarınızın herhangi bir ek sürücüye ihtiyacı yok." diyor.
 
Son düzenleme:
OpenGL: renderer: llvmpipe (LLVM 12.0.0 256 bits) v: 4.5 Mesa 21.2.6

Şu an GPU sürücüyü olması gerektiği gibi kullanmıyor. Aşağıdaki komutların çıktılarını da paylaş bakalım.

Kod:
inxi -SMGxx
dpkg -l | grep fglrx
cat /var/log/Xorg.0.log
sudo dmesg | egrep -i 'amdgpu|radeon|firmware'
Sürücü denetlediğim zaman ise "bilgisayarınızın herhangi bir ek sürücüye ihtiyacı yok." diyor.

Sürücü düzgün kullanılmadığı için uyarı alıyorsun, aslında bu aygıt için ek sürücüye gerek yok.
 
Şu an GPU sürücüyü olması gerektiği gibi kullanmıyor. Aşağıdaki komutların çıktılarını da paylaş bakalım.

Kod:
inxi -SMGxx
dpkg -l | grep fglrx
cat /var/log/Xorg.0.log
sudo dmesg | egrep -i 'amdgpu|radeon|firmware'


Sürücü düzgün kullanılmadığı için uyarı alıyorsun, aslında bu aygıt için ek sürücüye gerek yok.
Kod:
voyndex@voyndex-Linux:~$ inxi -SMGxx
System:
  Host: voyndex-Linux Kernel: 5.4.0-107-generic x86_64 bits: 64
  compiler: gcc v: 9.4.0 Desktop: Cinnamon 5.2.7 wm: muffin dm: LightDM
  Distro: Linux Mint 20.3 Una base: Ubuntu 20.04 focal
Machine:
  Type: Desktop Mobo: Micro-Star model: MAG B550 TOMAHAWK (MS-7C91) v: 2.0
  serial: <superuser/root required> UEFI: American Megatrends LLC. v: A.80
  date: 12/16/2021
Graphics:
  Device-1: AMD driver: N/A bus ID: 2d:00.0 chip ID: 1002:73ff
  Display: x11 server: X.Org 1.20.13 driver: fbdev
  unloaded: modesetting,vesa alternate: ati resolution: 2560x1440~93Hz
  OpenGL: renderer: llvmpipe (LLVM 12.0.0 256 bits) v: 4.5 Mesa 21.2.6
  compat-v: 3.1 direct render: Yes
voyndex@voyndex-Linux:~$ dpkg -l | grep fglrx
voyndex@voyndex-Linux:~$ cat /var/log/Xorg.0.log
[    28.741]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[    28.741] Build Operating System: linux Ubuntu
[    28.741] Current Operating System: Linux voyndex-Linux 5.4.0-107-generic #121-Ubuntu SMP Thu Mar 24 16:04:27 UTC 2022 x86_64
[    28.741] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-107-generic root=UUID=bf7d53b5-478c-4cad-a5a0-3a1664be6a81 ro quiet splash
[    28.741] Build Date: 14 December 2021  02:14:13PM
[    28.741] xorg-server 2:1.20.13-1ubuntu1~20.04.2 (For technical support please see Enterprise open source support | Ubuntu)
[    28.741] Current version of pixman: 0.38.4
[    28.741]     Before reporting problems, check X.Org
    to make sure that you have the latest version.
[    28.741] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.741] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr  6 14:50:08 2022
[    28.898] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    29.065] (==) No Layout section.  Using the first Screen section.
[    29.065] (==) No screen section available. Using defaults.
[    29.065] (**) |-->Screen "Default Screen Section" (0)
[    29.065] (**) |   |-->Monitor "<default monitor>"
[    29.114] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    29.114] (==) Automatically adding devices
[    29.114] (==) Automatically enabling devices
[    29.114] (==) Automatically adding GPU devices
[    29.114] (==) Automatically binding GPU devices
[    29.114] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    29.216] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    29.216]     Entry deleted from font path.
[    29.216] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    29.216]     Entry deleted from font path.
[    29.216] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    29.216]     Entry deleted from font path.
[    29.216] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    29.216]     Entry deleted from font path.
[    29.216] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    29.216]     Entry deleted from font path.
[    29.216] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    29.216] (==) ModulePath set to "/usr/lib/xorg/modules"
[    29.216] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    29.216] (II) Loader magic: 0x5579b498f020
[    29.216] (II) Module ABI versions:
[    29.216]     X.Org ANSI C Emulation: 0.4
[    29.216]     X.Org Video Driver: 24.1
[    29.216]     X.Org XInput driver : 24.1
[    29.216]     X.Org Server Extension : 10.0
[    29.217] (++) using VT number 7

[    29.217] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    29.218] (--) PCI:*(45@0:0:0) 1002:73ff:1eae:6501 rev 193, Mem @ 0x7c00000000/8589934592, 0x7e00000000/268435456, 0xfcd00000/1048576, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[    29.227] (II) LoadModule: "glx"
[    29.259] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    30.076] (II) Module glx: vendor="X.Org Foundation"
[    30.076]     compiled for 1.20.13, module version = 1.0.0
[    30.076]     ABI class: X.Org Server Extension, version 10.0
[    30.076] (==) Matched ati as autoconfigured driver 0
[    30.076] (==) Matched modesetting as autoconfigured driver 1
[    30.076] (==) Matched fbdev as autoconfigured driver 2
[    30.076] (==) Matched vesa as autoconfigured driver 3
[    30.076] (==) Assigned the driver to the xf86ConfigLayout
[    30.076] (II) LoadModule: "ati"
[    30.092] (WW) Warning, couldn't open module ati
[    30.092] (EE) Failed to load module "ati" (module does not exist, 0)
[    30.092] (II) LoadModule: "modesetting"
[    30.092] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    30.328] (II) Module modesetting: vendor="X.Org Foundation"
[    30.330]     compiled for 1.20.13, module version = 1.20.13
[    30.330]     Module class: X.Org Video Driver
[    30.330]     ABI class: X.Org Video Driver, version 24.1
[    30.330] (II) LoadModule: "fbdev"
[    30.330] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    30.424] (II) Module fbdev: vendor="X.Org Foundation"
[    30.424]     compiled for 1.20.1, module version = 0.5.0
[    30.424]     Module class: X.Org Video Driver
[    30.424]     ABI class: X.Org Video Driver, version 24.0
[    30.424] (II) LoadModule: "vesa"
[    30.424] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.469] (II) Module vesa: vendor="X.Org Foundation"
[    30.469]     compiled for 1.20.4, module version = 2.4.0
[    30.469]     Module class: X.Org Video Driver
[    30.469]     ABI class: X.Org Video Driver, version 24.0
[    30.469] (==) Matched ati as autoconfigured driver 0
[    30.469] (==) Matched modesetting as autoconfigured driver 1
[    30.469] (==) Matched fbdev as autoconfigured driver 2
[    30.469] (==) Matched vesa as autoconfigured driver 3
[    30.469] (==) Assigned the driver to the xf86ConfigLayout
[    30.469] (II) LoadModule: "ati"
[    30.469] (WW) Warning, couldn't open module ati
[    30.469] (EE) Failed to load module "ati" (module does not exist, 0)
[    30.469] (II) LoadModule: "modesetting"
[    30.469] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    30.469] (II) Module modesetting: vendor="X.Org Foundation"
[    30.469]     compiled for 1.20.13, module version = 1.20.13
[    30.469]     Module class: X.Org Video Driver
[    30.469]     ABI class: X.Org Video Driver, version 24.1
[    30.469] (II) UnloadModule: "modesetting"
[    30.469] (II) Unloading modesetting
[    30.469] (II) Failed to load module "modesetting" (already loaded, 0)
[    30.469] (II) LoadModule: "fbdev"
[    30.469] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    30.469] (II) Module fbdev: vendor="X.Org Foundation"
[    30.469]     compiled for 1.20.1, module version = 0.5.0
[    30.469]     Module class: X.Org Video Driver
[    30.469]     ABI class: X.Org Video Driver, version 24.0
[    30.469] (II) UnloadModule: "fbdev"
[    30.469] (II) Unloading fbdev
[    30.469] (II) Failed to load module "fbdev" (already loaded, 0)
[    30.469] (II) LoadModule: "vesa"
[    30.469] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.469] (II) Module vesa: vendor="X.Org Foundation"
[    30.469]     compiled for 1.20.4, module version = 2.4.0
[    30.469]     Module class: X.Org Video Driver
[    30.469]     ABI class: X.Org Video Driver, version 24.0
[    30.469] (II) UnloadModule: "vesa"
[    30.469] (II) Unloading vesa
[    30.469] (II) Failed to load module "vesa" (already loaded, 0)
[    30.469] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    30.469] (II) FBDEV: driver for framebuffer: fbdev
[    30.469] (II) VESA: driver for VESA chipsets: vesa
[    30.469] (EE) open /dev/dri/card0: No such file or directory
[    30.469] (WW) Falling back to old probe method for modesetting
[    30.469] (EE) open /dev/dri/card0: No such file or directory
[    30.469] (II) Loading sub module "fbdevhw"
[    30.469] (II) LoadModule: "fbdevhw"
[    30.469] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    30.599] (II) Module fbdevhw: vendor="X.Org Foundation"
[    30.599]     compiled for 1.20.13, module version = 0.0.2
[    30.599]     ABI class: X.Org Video Driver, version 24.1
[    30.599] (**) FBDEV(1): claimed PCI slot 45@0:0:0
[    30.599] (II) FBDEV(1): using default device
[    30.599] (EE) Screen 0 deleted because of no matching config section.
[    30.599] (II) UnloadModule: "modesetting"
[    30.599] (II) FBDEV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    30.599] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    30.599] (==) FBDEV(0): RGB weight 888
[    30.599] (==) FBDEV(0): Default visual is TrueColor
[    30.599] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.599] (II) FBDEV(0): hardware: EFI VGA (video memory: 14400kB)
[    30.599] (II) FBDEV(0): checking modes against framebuffer device...
[    30.599] (II) FBDEV(0): checking modes against monitor...
[    30.599] (II) FBDEV(0): Virtual size is 2560x1440 (pitch 2560)
[    30.599] (**) FBDEV(0):  Built-in mode "current": 368.7 MHz, 135.6 kHz, 92.6 Hz
[    30.599] (II) FBDEV(0): Modeline "current"x0.0  368.73  2560 2592 2656 2720  1440 1444 1448 1464 -hsync -vsync -csync (135.6 kHz b)
[    30.599] (==) FBDEV(0): DPI set to (96, 96)
[    30.600] (II) Loading sub module "fb"
[    30.600] (II) LoadModule: "fb"
[    30.600] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.690] (II) Module fb: vendor="X.Org Foundation"
[    30.690]     compiled for 1.20.13, module version = 1.0.0
[    30.690]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.690] (**) FBDEV(0): using shadow framebuffer
[    30.690] (II) Loading sub module "shadow"
[    30.690] (II) LoadModule: "shadow"
[    30.690] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    30.750] (II) Module shadow: vendor="X.Org Foundation"
[    30.750]     compiled for 1.20.13, module version = 1.1.0
[    30.750]     ABI class: X.Org ANSI C Emulation, version 0.4
[    30.750] (II) UnloadModule: "vesa"
[    30.750] (II) Unloading vesa
[    30.750] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[    30.877] (==) FBDEV(0): Backing store enabled
[    30.991] (==) FBDEV(0): DPMS enabled
[    30.994] (II) Initializing extension Generic Event Extension
[    30.994] (II) Initializing extension SHAPE
[    30.995] (II) Initializing extension MIT-SHM
[    30.995] (II) Initializing extension XInputExtension
[    31.052] (II) Initializing extension XTEST
[    31.053] (II) Initializing extension BIG-REQUESTS
[    31.053] (II) Initializing extension SYNC
[    31.053] (II) Initializing extension XKEYBOARD
[    31.053] (II) Initializing extension XC-MISC
[    31.053] (II) Initializing extension SECURITY
[    31.053] (II) Initializing extension XFIXES
[    31.053] (II) Initializing extension RENDER
[    31.053] (II) Initializing extension RANDR
[    31.053] (II) Initializing extension COMPOSITE
[    31.080] (II) Initializing extension DAMAGE
[    31.081] (II) Initializing extension MIT-SCREEN-SAVER
[    31.081] (II) Initializing extension DOUBLE-BUFFER
[    31.081] (II) Initializing extension RECORD
[    31.081] (II) Initializing extension DPMS
[    31.081] (II) Initializing extension Present
[    31.081] (II) Initializing extension DRI3
[    31.081] (II) Initializing extension X-Resource
[    31.081] (II) Initializing extension XVideo
[    31.081] (II) Initializing extension XVideo-MotionCompensation
[    31.081] (II) Initializing extension SELinux
[    31.081] (II) SELinux: Disabled on system
[    31.081] (II) Initializing extension GLX
[    31.094] (II) AIGLX: Screen 0 is not DRI2 capable
[    35.596] (II) IGLX: Loaded and initialized swrast
[    35.596] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    35.596] (II) Initializing extension XFree86-VidModeExtension
[    35.596] (II) Initializing extension XFree86-DGA
[    35.596] (II) Initializing extension XFree86-DRI
[    35.596] (II) Initializing extension DRI2
[    35.850] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    35.850] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    35.850] (II) LoadModule: "libinput"
[    35.850] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    35.898] (II) Module libinput: vendor="X.Org Foundation"
[    35.898]     compiled for 1.20.4, module version = 0.29.0
[    35.898]     Module class: X.Org XInput Driver
[    35.898]     ABI class: X.Org XInput driver, version 24.1
[    35.898] (II) Using input driver 'libinput' for 'Power Button'
[    35.898] (**) Power Button: always reports core events
[    35.898] (**) Option "Device" "/dev/input/event1"
[    35.898] (**) Option "_source" "server/udev"
[    35.919] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    35.919] (II) event1  - Power Button: device is a keyboard
[    35.919] (II) event1  - Power Button: device removed
[    35.959] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    35.959] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    35.959] (**) Option "xkb_model" "pc105"
[    35.959] (**) Option "xkb_layout" "tr"
[    36.033] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    36.033] (II) event1  - Power Button: device is a keyboard
[    36.033] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    36.033] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    36.033] (II) Using input driver 'libinput' for 'Power Button'
[    36.033] (**) Power Button: always reports core events
[    36.033] (**) Option "Device" "/dev/input/event0"
[    36.033] (**) Option "_source" "server/udev"
[    36.033] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    36.033] (II) event0  - Power Button: device is a keyboard
[    36.034] (II) event0  - Power Button: device removed
[    36.059] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    36.059] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    36.059] (**) Option "xkb_model" "pc105"
[    36.059] (**) Option "xkb_layout" "tr"
[    36.059] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    36.059] (II) event0  - Power Button: device is a keyboard
[    36.060] (II) config/udev: Adding input device Razer Razer DeathAdder V2 (/dev/input/event7)
[    36.060] (**) Razer Razer DeathAdder V2: Applying InputClass "libinput pointer catchall"
[    36.060] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder V2'
[    36.060] (**) Razer Razer DeathAdder V2: always reports core events
[    36.060] (**) Option "Device" "/dev/input/event7"
[    36.060] (**) Option "_source" "server/udev"
[    36.124] (II) event7  - Razer Razer DeathAdder V2: is tagged by udev as: Mouse
[    36.124] (II) event7  - Razer Razer DeathAdder V2: device is a pointer
[    36.124] (II) event7  - Razer Razer DeathAdder V2: device removed
[    36.183] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.0/0003:1532:0084.0005/input/input7/event7"
[    36.183] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder V2" (type: MOUSE, id 8)
[    36.183] (**) Option "AccelerationScheme" "none"
[    36.183] (**) Razer Razer DeathAdder V2: (accel) selected scheme none/0
[    36.183] (**) Razer Razer DeathAdder V2: (accel) acceleration factor: 2.000
[    36.183] (**) Razer Razer DeathAdder V2: (accel) acceleration threshold: 4
[    36.244] (II) event7  - Razer Razer DeathAdder V2: is tagged by udev as: Mouse
[    36.244] (II) event7  - Razer Razer DeathAdder V2: device is a pointer
[    36.244] (II) config/udev: Adding input device Razer Razer DeathAdder V2 (/dev/input/mouse1)
[    36.244] (II) No input driver specified, ignoring this device.
[    36.244] (II) This device may have been added with another device file.
[    36.244] (II) config/udev: Adding input device Razer Razer DeathAdder V2 System Control (/dev/input/event10)
[    36.244] (**) Razer Razer DeathAdder V2 System Control: Applying InputClass "libinput keyboard catchall"
[    36.244] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder V2 System Control'
[    36.244] (**) Razer Razer DeathAdder V2 System Control: always reports core events
[    36.244] (**) Option "Device" "/dev/input/event10"
[    36.244] (**) Option "_source" "server/udev"
[    36.245] (II) event10 - Razer Razer DeathAdder V2 System Control: is tagged by udev as: Keyboard
[    36.245] (II) event10 - Razer Razer DeathAdder V2 System Control: device is a keyboard
[    36.246] (II) event10 - Razer Razer DeathAdder V2 System Control: device removed
[    36.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.1/0003:1532:0084.0006/input/input10/event10"
[    36.267] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder V2 System Control" (type: KEYBOARD, id 9)
[    36.267] (**) Option "xkb_model" "pc105"
[    36.267] (**) Option "xkb_layout" "tr"
[    36.268] (II) event10 - Razer Razer DeathAdder V2 System Control: is tagged by udev as: Keyboard
[    36.268] (II) event10 - Razer Razer DeathAdder V2 System Control: device is a keyboard
[    36.268] (II) config/udev: Adding input device Razer Razer DeathAdder V2 (/dev/input/event11)
[    36.268] (II) No input driver specified, ignoring this device.
[    36.268] (II) This device may have been added with another device file.
[    36.269] (II) config/udev: Adding input device Razer Razer DeathAdder V2 Keyboard (/dev/input/event8)
[    36.269] (**) Razer Razer DeathAdder V2 Keyboard: Applying InputClass "libinput keyboard catchall"
[    36.269] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder V2 Keyboard'
[    36.269] (**) Razer Razer DeathAdder V2 Keyboard: always reports core events
[    36.269] (**) Option "Device" "/dev/input/event8"
[    36.269] (**) Option "_source" "server/udev"
[    36.269] (II) event8  - Razer Razer DeathAdder V2 Keyboard: is tagged by udev as: Keyboard
[    36.269] (II) event8  - Razer Razer DeathAdder V2 Keyboard: device is a keyboard
[    36.269] (II) event8  - Razer Razer DeathAdder V2 Keyboard: device removed
[    36.295] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.1/0003:1532:0084.0006/input/input8/event8"
[    36.295] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder V2 Keyboard" (type: KEYBOARD, id 10)
[    36.295] (**) Option "xkb_model" "pc105"
[    36.295] (**) Option "xkb_layout" "tr"
[    36.296] (II) event8  - Razer Razer DeathAdder V2 Keyboard: is tagged by udev as: Keyboard
[    36.296] (II) event8  - Razer Razer DeathAdder V2 Keyboard: device is a keyboard
[    36.296] (II) config/udev: Adding input device Razer Razer DeathAdder V2 Consumer Control (/dev/input/event9)
[    36.296] (**) Razer Razer DeathAdder V2 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    36.296] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder V2 Consumer Control'
[    36.296] (**) Razer Razer DeathAdder V2 Consumer Control: always reports core events
[    36.296] (**) Option "Device" "/dev/input/event9"
[    36.296] (**) Option "_source" "server/udev"
[    36.297] (II) event9  - Razer Razer DeathAdder V2 Consumer Control: is tagged by udev as: Keyboard
[    36.297] (II) event9  - Razer Razer DeathAdder V2 Consumer Control: device is a keyboard
[    36.297] (II) event9  - Razer Razer DeathAdder V2 Consumer Control: device removed
[    36.327] (II) libinput: Razer Razer DeathAdder V2 Consumer Control: needs a virtual subdevice
[    36.327] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.1/0003:1532:0084.0006/input/input9/event9"
[    36.327] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder V2 Consumer Control" (type: MOUSE, id 11)
[    36.327] (**) Option "AccelerationScheme" "none"
[    36.327] (**) Razer Razer DeathAdder V2 Consumer Control: (accel) selected scheme none/0
[    36.327] (**) Razer Razer DeathAdder V2 Consumer Control: (accel) acceleration factor: 2.000
[    36.327] (**) Razer Razer DeathAdder V2 Consumer Control: (accel) acceleration threshold: 4
[    36.328] (II) event9  - Razer Razer DeathAdder V2 Consumer Control: is tagged by udev as: Keyboard
[    36.328] (II) event9  - Razer Razer DeathAdder V2 Consumer Control: device is a keyboard
[    36.328] (II) config/udev: Adding input device Razer Razer DeathAdder V2 (/dev/input/event12)
[    36.328] (**) Razer Razer DeathAdder V2: Applying InputClass "libinput keyboard catchall"
[    36.328] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder V2'
[    36.328] (**) Razer Razer DeathAdder V2: always reports core events
[    36.328] (**) Option "Device" "/dev/input/event12"
[    36.328] (**) Option "_source" "server/udev"
[    36.329] (II) event12 - Razer Razer DeathAdder V2: is tagged by udev as: Keyboard
[    36.329] (II) event12 - Razer Razer DeathAdder V2: device is a keyboard
[    36.329] (II) event12 - Razer Razer DeathAdder V2: device removed
[    36.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.2/0003:1532:0084.0007/input/input12/event12"
[    36.367] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder V2" (type: KEYBOARD, id 12)
[    36.367] (**) Option "xkb_model" "pc105"
[    36.367] (**) Option "xkb_layout" "tr"
[    36.368] (II) event12 - Razer Razer DeathAdder V2: is tagged by udev as: Keyboard
[    36.368] (II) event12 - Razer Razer DeathAdder V2: device is a keyboard
[    36.369] (II) config/udev: Adding input device MSI MYSTIC LIGHT  (/dev/input/event13)
[    36.369] (II) No input driver specified, ignoring this device.
[    36.369] (II) This device may have been added with another device file.
[    36.369] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[    36.369] (II) No input driver specified, ignoring this device.
[    36.369] (II) This device may have been added with another device file.
[    36.369] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event15)
[    36.369] (II) No input driver specified, ignoring this device.
[    36.369] (II) This device may have been added with another device file.
[    36.369] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event16)
[    36.369] (II) No input driver specified, ignoring this device.
[    36.369] (II) This device may have been added with another device file.
[    36.369] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event17)
[    36.369] (II) No input driver specified, ignoring this device.
[    36.369] (II) This device may have been added with another device file.
[    36.370] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event18)
[    36.370] (II) No input driver specified, ignoring this device.
[    36.370] (II) This device may have been added with another device file.
[    36.370] (II) config/udev: Adding input device ADATA XPG Gaming Keyboard (/dev/input/event2)
[    36.370] (**) ADATA XPG Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    36.370] (II) Using input driver 'libinput' for 'ADATA XPG Gaming Keyboard'
[    36.370] (**) ADATA XPG Gaming Keyboard: always reports core events
[    36.370] (**) Option "Device" "/dev/input/event2"
[    36.370] (**) Option "_source" "server/udev"
[    36.371] (II) event2  - ADATA XPG Gaming Keyboard: is tagged by udev as: Keyboard
[    36.371] (II) event2  - ADATA XPG Gaming Keyboard: device is a keyboard
[    36.371] (II) event2  - ADATA XPG Gaming Keyboard: device removed
[    36.415] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb3/3-3/3-3:1.0/0003:125F:9418.0001/input/input2/event2"
[    36.415] (II) XINPUT: Adding extended input device "ADATA XPG Gaming Keyboard" (type: KEYBOARD, id 13)
[    36.415] (**) Option "xkb_model" "pc105"
[    36.415] (**) Option "xkb_layout" "tr"
[    36.416] (II) event2  - ADATA XPG Gaming Keyboard: is tagged by udev as: Keyboard
[    36.416] (II) event2  - ADATA XPG Gaming Keyboard: device is a keyboard
[    36.416] (II) config/udev: Adding input device ADATA XPG Gaming Keyboard (/dev/input/event3)
[    36.416] (**) ADATA XPG Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    36.416] (II) Using input driver 'libinput' for 'ADATA XPG Gaming Keyboard'
[    36.416] (**) ADATA XPG Gaming Keyboard: always reports core events
[    36.416] (**) Option "Device" "/dev/input/event3"
[    36.416] (**) Option "_source" "server/udev"
[    36.417] (II) event3  - ADATA XPG Gaming Keyboard: is tagged by udev as: Keyboard
[    36.417] (II) event3  - ADATA XPG Gaming Keyboard: device is a keyboard
[    36.417] (II) event3  - ADATA XPG Gaming Keyboard: device removed
[    36.447] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb3/3-3/3-3:1.1/0003:125F:9418.0002/input/input3/event3"
[    36.447] (II) XINPUT: Adding extended input device "ADATA XPG Gaming Keyboard" (type: KEYBOARD, id 14)
[    36.447] (**) Option "xkb_model" "pc105"
[    36.447] (**) Option "xkb_layout" "tr"
[    36.448] (II) event3  - ADATA XPG Gaming Keyboard: is tagged by udev as: Keyboard
[    36.448] (II) event3  - ADATA XPG Gaming Keyboard: device is a keyboard
[    36.448] (II) config/udev: Adding input device ADATA XPG Gaming Keyboard Consumer Control (/dev/input/event4)
[    36.448] (**) ADATA XPG Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    36.448] (II) Using input driver 'libinput' for 'ADATA XPG Gaming Keyboard Consumer Control'
[    36.448] (**) ADATA XPG Gaming Keyboard Consumer Control: always reports core events
[    36.448] (**) Option "Device" "/dev/input/event4"
[    36.448] (**) Option "_source" "server/udev"
[    36.449] (II) event4  - ADATA XPG Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[    36.449] (II) event4  - ADATA XPG Gaming Keyboard Consumer Control: device is a keyboard
[    36.449] (II) event4  - ADATA XPG Gaming Keyboard Consumer Control: device removed
[    36.483] (II) libinput: ADATA XPG Gaming Keyboard Consumer Control: needs a virtual subdevice
[    36.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb3/3-3/3-3:1.1/0003:125F:9418.0002/input/input4/event4"
[    36.483] (II) XINPUT: Adding extended input device "ADATA XPG Gaming Keyboard Consumer Control" (type: MOUSE, id 15)
[    36.483] (**) Option "AccelerationScheme" "none"
[    36.483] (**) ADATA XPG Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[    36.483] (**) ADATA XPG Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    36.483] (**) ADATA XPG Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[    36.484] (II) event4  - ADATA XPG Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[    36.484] (II) event4  - ADATA XPG Gaming Keyboard Consumer Control: device is a keyboard
[    36.484] (II) config/udev: Adding input device ADATA XPG Gaming Keyboard Mouse (/dev/input/event5)
[    36.484] (**) ADATA XPG Gaming Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[    36.484] (II) Using input driver 'libinput' for 'ADATA XPG Gaming Keyboard Mouse'
[    36.484] (**) ADATA XPG Gaming Keyboard Mouse: always reports core events
[    36.484] (**) Option "Device" "/dev/input/event5"
[    36.484] (**) Option "_source" "server/udev"
[    36.485] (II) event5  - ADATA XPG Gaming Keyboard Mouse: is tagged by udev as: Mouse
[    36.485] (II) event5  - ADATA XPG Gaming Keyboard Mouse: device is a pointer
[    36.485] (II) event5  - ADATA XPG Gaming Keyboard Mouse: device removed
[    36.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb3/3-3/3-3:1.1/0003:125F:9418.0002/input/input5/event5"
[    36.555] (II) XINPUT: Adding extended input device "ADATA XPG Gaming Keyboard Mouse" (type: MOUSE, id 16)
[    36.555] (**) Option "AccelerationScheme" "none"
[    36.555] (**) ADATA XPG Gaming Keyboard Mouse: (accel) selected scheme none/0
[    36.555] (**) ADATA XPG Gaming Keyboard Mouse: (accel) acceleration factor: 2.000
[    36.555] (**) ADATA XPG Gaming Keyboard Mouse: (accel) acceleration threshold: 4
[    36.556] (II) event5  - ADATA XPG Gaming Keyboard Mouse: is tagged by udev as: Mouse
[    36.556] (II) event5  - ADATA XPG Gaming Keyboard Mouse: device is a pointer
[    36.556] (II) config/udev: Adding input device ADATA XPG Gaming Keyboard Mouse (/dev/input/mouse0)
[    36.556] (II) No input driver specified, ignoring this device.
[    36.556] (II) This device may have been added with another device file.
[    36.556] (II) config/udev: Adding input device USBFC1 (/dev/input/event6)
[    36.556] (**) USBFC1: Applying InputClass "libinput keyboard catchall"
[    36.556] (II) Using input driver 'libinput' for 'USBFC1'
[    36.557] (**) USBFC1: always reports core events
[    36.557] (**) Option "Device" "/dev/input/event6"
[    36.557] (**) Option "_source" "server/udev"
[    36.557] (II) event6  - USBFC1: is tagged by udev as: Keyboard
[    36.557] (II) event6  - USBFC1: device is a keyboard
[    36.557] (II) event6  - USBFC1: device removed
[    36.587] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb3/3-4/3-4:1.3/0003:0600:A616.0004/input/input6/event6"
[    36.587] (II) XINPUT: Adding extended input device "USBFC1" (type: KEYBOARD, id 17)
[    36.587] (**) Option "xkb_model" "pc105"
[    36.587] (**) Option "xkb_layout" "tr"
[    36.588] (II) event6  - USBFC1: is tagged by udev as: Keyboard
[    36.588] (II) event6  - USBFC1: device is a keyboard
[    36.588] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event19)
[    36.588] (II) No input driver specified, ignoring this device.
[    36.588] (II) This device may have been added with another device file.
[    36.588] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event20)
[    36.588] (II) No input driver specified, ignoring this device.
[    36.588] (II) This device may have been added with another device file.
[    36.588] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event21)
[    36.588] (II) No input driver specified, ignoring this device.
[    36.588] (II) This device may have been added with another device file.
[    36.589] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event22)
[    36.589] (II) No input driver specified, ignoring this device.
[    36.589] (II) This device may have been added with another device file.
[    36.589] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event23)
[    36.589] (II) No input driver specified, ignoring this device.
[    36.589] (II) This device may have been added with another device file.
[    36.589] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event24)
[    36.589] (II) No input driver specified, ignoring this device.
[    36.589] (II) This device may have been added with another device file.
[    36.589] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event25)
[    36.589] (II) No input driver specified, ignoring this device.
[    36.589] (II) This device may have been added with another device file.
[    36.592] (**) Razer Razer DeathAdder V2 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    36.592] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder V2 Consumer Control'
[    36.592] (**) Razer Razer DeathAdder V2 Consumer Control: always reports core events
[    36.592] (**) Option "Device" "/dev/input/event9"
[    36.592] (**) Option "_source" "_driver/libinput"
[    36.592] (II) libinput: Razer Razer DeathAdder V2 Consumer Control: is a virtual subdevice
[    36.592] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.1/0003:1532:0084.0006/input/input9/event9"
[    36.592] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder V2 Consumer Control" (type: KEYBOARD, id 18)
[    36.592] (**) Option "xkb_model" "pc105"
[    36.592] (**) Option "xkb_layout" "tr"
[    36.592] (**) ADATA XPG Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    36.592] (II) Using input driver 'libinput' for 'ADATA XPG Gaming Keyboard Consumer Control'
[    36.592] (**) ADATA XPG Gaming Keyboard Consumer Control: always reports core events
[    36.592] (**) Option "Device" "/dev/input/event4"
[    36.592] (**) Option "_source" "_driver/libinput"
[    36.592] (II) libinput: ADATA XPG Gaming Keyboard Consumer Control: is a virtual subdevice
[    36.592] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:2f:00.3/usb3/3-3/3-3:1.1/0003:125F:9418.0002/input/input4/event4"
[    36.592] (II) XINPUT: Adding extended input device "ADATA XPG Gaming Keyboard Consumer Control" (type: KEYBOARD, id 19)
[    36.592] (**) Option "xkb_model" "pc105"
[    36.592] (**) Option "xkb_layout" "tr"
voyndex@voyndex-Linux:~$ sudo dmesg | egrep -i 'amdgpu|radeon|firmware'
[sudo] voyndex için parola:             
[    0.578193] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.584499] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
voyndex@voyndex-Linux:~$
 
Son düzenleyen: Moderatör:
Kurulumdan sonra herhangi bir işlem yaptın mı? Çekirdekte olması gerekn bir modülü bulamıyor sistem.

Şurada da sürücünün etkinleşmediği görülüyor.

Kurulumdan sonra driver düzgün çalışmadığı için, manuel olarak kurulum yaptım, biraz kurcaladım. Ancak formatlayıp 2 kez tüm güncellemeleri yapsam da kendiliğinden düzelmedi, sonrasında manuel kurulum yaptım.
 
Son düzenleyen: Moderatör:
Kurulumdan sonra driver düzgün çalışmadığı için, manuel olarak kurulum yaptım, biraz kurcaladım. Ancak formatlayıp 2 kez tüm güncellemeleri yapsam da kendiliğinden düzelmedi, sonrasında manuel kurulum yaptım.

Ne yaptın peki, manuel kurulumdan kastın nedir? Ayrıntılı bilgi vermen gerekiyor, şu an ki durum normal değil.

İstersen yeniden kurulum yapıp, aşağıdaki komutların çıktısını paylaş.

Kod:
inxi -SGxx

Şu ISO dosyası ile kurulum yaparsın.

 
Çözüm
Ne yaptın peki, manuel kurulumdan kastın nedir? Ayrıntılı bilgi vermen gerekiyor, şu anki durum normal değil.

İstersen yeniden kurulum yapıp, aşağıdaki komutların çıktısını paylaş.

Kod:
inxi -SGxx

Şu ISO dosyası ile kurulum yaparsın.


Manuelden kastım AMD sitesine girip 6600XT modelini seçim Ubuntu 64 Bit desbian dosyasını indirip kurmak.
O zaman baştan format atayım güncellemeleri yapıp sizin yazdığınız komutları paylaşayım.
Ve bir şey daha sormak istiyorum ben formattan sonra anakartımdaki 2.5gbit portunu kullanmak için Realtek sitesinden bz. 2 dosyasını kuruyorum yanına da 1.gbit Realtek enthernet driver bz. 2 kurulumu yapıyorum bu GPU sürücülerine bir etki yaratmaz değil mi? Çünkü güncellemeleri yaptığım zaman 2.5gbit LAN portunu taktığımda kablo takılı değil diyor driver olmadığı için.
Ne yaptın peki, manuel kurulumdan kastın nedir? Ayrıntılı bilgi vermen gerekiyor, şu anki durum normal değil.

İstersen yeniden kurulum yapıp, aşağıdaki komutların çıktısını paylaş.

Kod:
inxi -SGxx

Şu ISO dosyası ile kurulum yaparsın.


GRUB yüklemesi başarısız hatası aldım 3 defa ikincil monitörüm görüntüsü geldi sanırım GPU sürücülerini sorunsuz yüklüyor bu sürüm ancak GRUB hatasını nasıl çözeceğim?
 
Son düzenleme:

Geri
Yukarı