Linux Mint'te Windows ISO yazdırma sırasında WoeUSB hatası

crqz

Hectopat
Katılım
3 Kasım 2021
Mesajlar
5
Merhaba, WoeUSB ile ISO yazmaya çalışırken böyle bir hata veriyor ne yapmalıyım?
Installation failed!
Exit code: 256
Log:
WoeUSB v3.3.1
==============================
Mounting source filesystem...
Wiping all existing partition table and filesystem signatures in /dev/sdc...
/dev/sdc: 2 bayt ofset 0x000001fe'te silindi (dos): 55 aa
/dev/sdc: disk bölümleme tablosunu yeniden okumak için ioctl çağrılıyor: Başarılı
Ensure that /dev/sdc is really wiped...
Creating new partition table on /dev/sdc...
Creating target partition...
Making system realize that partition table has changed...
Wait 3 seconds for block device nodes to populate...
Cluster size has been automatically set to 4096 bytes.
Creating NTFS volume structures.
mkntfs completed successfully. Have a nice day.
--2021-11-14 11:57:04-- https://github.com/pbatard/rufus/raw/master/res/uefi/uefi-ntfs.img
github.com (github.com) çözümleniyor... pulse
140.82.121.4
github.com (github.com)|140.82.121.4|:443 bağlanılıyor... pulse
bağlantı kuruldu.
HTTP isteği gönderildi, cevap bekleniyor... pulse
302 Found
Yer: https://raw.githubusercontent.com/pbatard/rufus/master/res/uefi/uefi-ntfs.img [izleyen]
--2021-11-14 11:57:04-- https://raw.githubusercontent.com/pbatard/rufus/master/res/uefi/uefi-ntfs.img
raw.githubusercontent.com (raw.githubusercontent.com) çözümleniyor... pulse
185.199.111.133, 185.199.109.133, 185.199.110.133, ...
raw.githubusercontent.com (raw.githubusercontent.com)|185.199.111.133|:443 bağlanılıyor... pulse
bağlantı kuruldu.
HTTP isteği gönderildi, cevap bekleniyor... pulse
200 OK
Uzunluk: 1048576 (1,0M) [application/octet-stream]
Kayıt yeri: `/tmp/WoeUSB.umXeRF.tempdir/uefi-ntfs.img'
0K .......... .......... .......... .......pulse
... .......... 4% 690K 1s
50K .......... ...pulse
....... .......... .......... .......... 9% 818K 1s
100K .......... .......... .......pulse
... .......... .......... 14% 1,31M 1s
150K .......... .......... .......... .......... .......... 19% 3,58M 1s
200K .......... .......... .......... .......... .......... 24% 3,80M 1s
250K .......... .......... .pulse
......... .......... .......... 29% 1,95M 1s
300K .......... .......... .......... .......... .......... 34% 1,99M 0s
350K .......... .......... .......... ...pulse
....... .......... 39% 3,01M 0s
400K .......... .......... .......... .......... .......... 43% 5,52M 0s
450K .......... .......... .........pulse
. .......... .......... 48% 650K 0s
500K .......... .......... .......... .......... .......... 53% 6,91M 0s
550K .......... .......... .......... .......... .......... 58% 29,3M 0s
600K .......... .......... .......... .......... .......... 63% 61,7M 0s
650K .......... .......... .pulse
......... .......... .......... 68% 46,7M 0s
700K
 
Önce mintsitck uyguamasını aç ve USB belleği NTFS olarak biçimlendir. Sonra aşağıdaki komutla disk bölümünü ayır.

Kod:
sudo umount /dev/sdc1

Sonra yeniden yazdırmayı denersin. Hata alırsa, sistemini yeniden başlat ve yazdıklarımı tekrar uygula.

Bu şekilde çözemezsen, Ventoy ile denersin.

 
Uyarı! Bu konu 5 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Bu konuyu görüntüleyen kullanıcılar

Technopat Haberler

Yeni konular

Geri
Yukarı