Mavi ekran hatası

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: USBPORT.SYS


DRIVER_IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x100000d1 (0x95928cdf, 0x00000002, 0x00000000, 0xb6456359)


*** USBPORT.SYS - Address 0xb6456359 base at 0xb644e000 DateStamp 0x47c58999

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: cmaudio.sys


DRIVER_IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x100000d1 (0x757448fd, 0x000000ff, 0x00000008, 0x757448fd)


*** cmaudio.sys - Address 0xb672d058 base at 0xb671b000 DateStamp 0x3dd89c0b

A problem has been detected and Windows has been shut down to prevent damageto your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x1000000a (0x8a1cf008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x1000000a (0x8a1dc008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x1000000a (0x902926fc, 0x0000001c, 0x00000000, 0x804fabe8)


***  - Address 0x00000000 base at 0x00000000 DateStamp 0x00000000

*** STOP: 0x1000000a (0x8a011008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x1000000a (0x8a034008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x1000000a (0x8a06b008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x1000000a (0x8a001008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x1000000a (0x8a252008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x1000000a (0x8a04d008, 0x00000002, 0x00000001, 0x8052390f)


*** ntoskrnl.exe - Address 0x8052390f base at 0x804d7000 DateStamp 0x4a7834fd

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


MEMORY_MANAGEMENT


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000001a (0x0004128b, 0x0d210201, 0x2d12b886, 0xc0883000)


*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x0000001a (0x00041284, 0x2efbb001, 0x0000363a, 0xc0883000)


*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x0000001a (0x0004128b, 0x13480201, 0x6298a886, 0xc0883000)


*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x0000001a (0x0004128b, 0x0b65c201, 0x10af3886, 0xc0883000)


*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x0000001a (0x00041284, 0x055ba001, 0x00016a3a, 0xc0883000)


*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x0000001a (0x00041284, 0x0d853001, 0x00003eaa, 0xc0883000)


*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4a7834fd

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


PAGE_FAULT_IN_NONPAGED_AREA


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x10000050 (0xf0a03d7c, 0x00000000, 0x80505f17, 0x00000002)


*** ntoskrnl.exe - Address 0x80505f17 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x10000050 (0xe4b8801c, 0x00000000, 0xbf83739b, 0x00000001)


*** win32k.sys - Address 0xbf83739b base at 0xbf800000 DateStamp 0x4a85564b

*** STOP: 0x10000050 (0xc1fab07c, 0x00000000, 0x80505f17, 0x00000000)


*** ntoskrnl.exe - Address 0x80505f17 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x10000050 (0xee493758, 0x00000000, 0xbf837c57, 0x00000002)


*** win32k.sys - Address 0xbf837c57 base at 0xbf800000 DateStamp 0x4a85564b

*** STOP: 0x10000050 (0xc4a24d7c, 0x00000000, 0x80505f17, 0x00000000)


*** ntoskrnl.exe - Address 0x80505f17 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x10000050 (0x9628e6d2, 0x00000000, 0x805c01a2, 0x00000000)


***  - Address 0x00000000 base at 0x00000000 DateStamp 0x00000000

*** STOP: 0x10000050 (0xf0a03d7c, 0x00000000, 0x80505f17, 0x00000002)


*** ntoskrnl.exe - Address 0x80505f17 base at 0x804d7000 DateStamp 0x4a7834fd

*** STOP: 0x10000050 (0xef06a4bc, 0x00000001, 0xb701f105, 0x00000002)


*** nv4_mini.sys - Address 0xb701f105 base at 0xb6d7f000 DateStamp 0x51c417e6

*** STOP: 0x10000050 (0xe20d9480, 0x00000001, 0xbf802892, 0x00000001)


*** win32k.sys - Address 0xbf802892 base at 0xbf800000 DateStamp 0x4a85564b

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: nv4_disp.dll


SYSTEM_THREAD_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x1000007e (0xc0000005, 0xbd1be186, 0xb0594c34, 0xb0594930)


*** nv4_disp.dll - Address 0xbd1be186 base at 0xbd012000 DateStamp 0x51c416b6

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: nv4_disp.dll


THREAD_STUCK_IN_DEVICE_DRIVER


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x000000ea (0x88f34900, 0x89b14900, 0x89b39d80, 0x00000001)


*** nv4_disp.dll - Address 0xbd113a4f base at 0xbd012000 DateStamp 0x51c416b6

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


UNEXPECTED_KERNEL_MODE_TRAP


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000007f (0x00000000, 0x00000000, 0x00000000, 0x00000000)


*** ntoskrnl.exe - Address 0x804f9f1e base at 0x804d7000 DateStamp 0x4a7834fd