A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: Wdf01000.sys
BAD_POOL_CALLER
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000c2 (0x0000000000000007, 0x00000000000011c1, 0x000000000000c63b,
0xfffffa8004c03e10)
*** Wdf01000.sys - Address 0xfffff880010a3405 base at 0xfffff88001096000 DateStamp
0x50eceb04ntoskrnl.exe ntoskrnl.exe+272a6e fffff801`0b40c000 fffff801`0bb58000 0x0074c000 0x51a966cd 1.6.2013 06:13:17
USBXHCI.SYS USBXHCI.SYS+39101 fffff880`06c94000 fffff880`06ceb000 0x00057000 0x51a96563 1.6.2013 06:07:15
Wdf01000.sys Wdf01000.sys+d405 fffff880`01096000 fffff880`01158000 0x000c2000 0x50eceb04 9.1.2013 06:59:00
WppRecorder.sys WppRecorder.sys+19f0 fffff880`0117f000 fffff880`0118a000 0x0000b000 0x5010ab73 26.7.2012 05:29:07
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: USBXHCI.SYS
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff80185d2fe5e, 0x0000000000000001,
0x0000000000000008)
*** USBXHCI.SYS - Address 0xfffff88007020108 base at 0xfffff88007000000 DateStamp
0x51a96563
Bios'um güncel,teşekkürler.
