Monster T5 17.1 BIOS Güncellemesi Nasıl Yapılır?

LockDownTR

LockDownTR

Megapat
Katılım
6 Mart 2016
Mesajlar
754
Çözümler
4
Daha fazla  
Cinsiyet
Erkek
Meslek
Fizyoterapist-EGM
Herkese merhaba Tulpar T5 17.1 cihazım için BIOS güncellemesi arıyorum bulamıyorum yardımcı olur musunuz ?

Kod: 
[ BIOS ]

    BIOS Özellikleri:
      Sağlayıcı                                         American Megatrends Inc.
      Sürüm                                             N.1.08
      Yayım Tarihi                                      09/03/2018
      Boyut                                             16 MB
      Sistem BIOS Sürümü                                5.13
      Gömülü Kontrolcü Firmware Sürümü                  2.0
      Açılış Sürücüleri                                 Floppy Disk, Hard Disk, CD-ROM
      Yetenekler                                        Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
      Desteklenen Standardlar                           DMI, ACPI, UEFI
      Genişleme Yeteneği                                PCI, USB
      Sanal Makine                                      Hayır

    BIOS Üreticisi:
      Firma Adı                                         American Megatrends Inc.
      Ürün Bilgisi                                      American Megatrends International LLC - BIOS ⁄ UEFI Firmware
      BIOS Yükseltmeleri                                http://www.aida64.com/goto/?p=biosupdates
 
Son düzenleyen: Moderatör:
Monster Notebook artık BIOS güncellemelerini riskleri en aza indirmek için kendisi yapıyor. Teknik servis ile iletişime geçerseniz onlar yardımcı olur.
 
Alperen Özdemir dedi:
Monster Notebook artık BIOS güncellemelerini riskleri en aza indirmek için kendisi yapıyor. Teknik servis ile iletişime geçerseniz onlar yardımcı olur.
Genişletmek için tıkla...
Yardımcı olmadılar 3 kez mesaj attım cihazı gönderin tarzında bir geri dönüt aldım ama kendim atabilirim deneyimim var bu konuda ama biosu bulamadım sitesi çok karışık :/
 
Alperen Özdemir dedi:
Artık BIOS'u Driver sekmesine koymuyorlar. Maalesef bilgisayarı yollamanız gerekecek.
Genişletmek için tıkla...
American Megatrends sitesinden indirebilecek yada bulabilecek biri vardır belki diye bekliyorum.
Arkadaşlar Monster akşam t5 17.1 için Bios ve Ec Fw güncellemelerini attı fakat sadece Biosu güncelledim bilgisayar açık haldeyken Exe dosyasını açıp. Ec Fw nasıl güncellenir bilmiyorum yardımcı olur musunuz ?
monster tarafından verilen bios ve ec fw dosyası
 
Son düzenleme:
Öncelikle ürünün model numarası GJ5CN6A. BIOS sürüm notları:

Kod: 
-------------------------------------------------------------------------------
Model Name : GJ5CN6A Monster BIOS Release History
-------------------------------------------------------------------------------
===============================================================================
BIOS File                      : GJ5CN6AN109.BIN
Checksum                       : 0xC91BA981
Capsule File                   : GJ5CN6AN109.ROM
Capsule Checksum               : 0x78BD853E
Release Date                   : 02/22/2019
BIOS version                   : GJ5CN6A N.1.09 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK016
ME FW Version                  : 12.0.6.1120
Microcode version              : 0x84
Coffeelake Platform Silicon RC : 7.0.25.34
===============================================================================
history£º
1.[All][Fix] Intel identified a MRC fix to limit EQ, SR and DS values.
2.[UniwillPkg] Fix data lose when CMD 0x08 and 0x1A .
3.[GJ5CN6A_STD][GJ5CN6A_033+]Fixed build error after adding GJ5CN6A_033"
4.[GJ5CN6A][GJ5CN6A_034]Fixed the customization logo is covered by original logo during POST ¡£
5.[GJ5CN6A_STD][GJ5CN6A_033]Modify the USB type-C's _PLD and _UPC for resolver HLK USB Type-C ACPI Validation¡£
6.[GJ5CN6A_STD][GJ5CN6E_PST_011] Fix SecureBootSetup item and PK key cannot update by Intel(R) fpt utility¡£
7.[GJ5CN6A_STD][Bug]Fixed one of cpu core's frequency too high when install optane memory in RAID mode[sync with GK5CN6X]¡£
===============================================================================
BIOS File                      : GJ5CN6AN108.BIN
Checksum                       : 0xC91B18CD
Capsule File                   : GJ5CN6AN108.ROM
Capsule Checksum               : 0x78BCF48A
Release Date                   : 09/03/2018
BIOS version                   : GJ5CN6A N.1.08 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK016
ME FW Version                  : 12.0.6.1120
Microcode version              : 0x84
Coffeelake Platform Silicon RC : 7.0.25.34
===============================================================================
[GJ5CN6A][Misc]sync with GI5CNxA-->upgrade the ME version to 12.0.6.1120.
Uniwill][UniwillPkg] Add OEM WMI module in UniwillPkg
[GJ5CN6A_STD][GJ5CN6A_032]Fixed the customer Logo can't be shown during POST.
update ec to 2.00.xx.
===============================================================================
BIOS File                      : GJ5CN6AN107.BIN
Checksum                       : 0xC9C937F2
Capsule File                   : GJ5CN6AN107.ROM
Capsule Checksum               : 0x78CC837A
Release Date                   : 07/26/2018
BIOS version                   : GJ5CN6A N.1.07 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK016
ME FW Version                  : 12.0.3.1091
Microcode version              : 0x84
Coffeelake Platform Silicon RC : 7.0.25.34
===============================================================================
[GJ5CN6A][CT4R TDA9252 Support]Support Pixart 9252 touchpad.
[GJ5CN6A][Misc]Add back Pixart TDA9860 TouchPad¡£
[GJ5CN6A][Fix] Disable PCIE Hotplug in raid mode to fix the freq of one of cpu cores misbehaving¡£
[GJ5CN6A] Optimize code about disable PCIe hotplug in raid mode.
[GJ5CN6A][GJ5CN6A_030]Force the package C State Limit to C7s¡£
[GJ5CN6A_031]Fixed WHQL usb exposed port system test fail and modify the USB ports _UPC, _PLD
[GJ5CN6A_STD]Upgrade the ME version to 12.0.3.1091
[GJ5CN6A_032]Fixed the customer Logo can't be shown during POST
Update ec to 1.08.xx¡£
===============================================================================
BIOS File                      : GJ5CN6AN106.BIN
Checksum                       : 0xC9D7F1BA
Capsule File                   : GJ5CN6AN106.ROM
Capsule Checksum               : 0x78D515BA
Release Date                   : 2018/05/03
BIOS version                   : GJ5CN6A N.1.06 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK016
ME FW Version                  : 12.0.0.1069
Microcode version              : 0x84
Coffeelake Platform Silicon RC : 7.0.25.34
===============================================================================
1.reserve DMIEdit data though OFBD module.
2.[Fix] Sync with GK5CN6X.Temp solution to fix can't enter recovery, because token LAST_BOOT_FAIL_MECHANISM set 0 will effect it.
3.update EC 1.05.xx to support capsule flash
4.Fixed battery loss FCC issue
===============================================================================
BIOS File                      : GJ5CN6AN105.BIN
Checksum                       : 0xC9D7F1BA
Capsule File                   : GJ5CN6AN105.ROM
Capsule Checksum               : 0x78D515BA
Release Date                   : 2018/04/19
BIOS version                   : GJ5CN6A N.1.05 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK016
ME FW Version                  : 12.0.0.1069
Microcode version              : 0x84
Coffeelake Platform Silicon RC : 7.0.25.34
===============================================================================
1.[Patch] This is a patch for win10 os task manager to show current memory speed instead of max speed.
===============================================================================
BIOS File                      : GJ5CN6AN104.BIN
Checksum                       : 0xC9D8F9EE
Capsule File                   : GJ5CN6AN104.ROM
Capsule Checksum               : 0x78D61DEE
Release Date                   : 2018/04/18
BIOS version                   : GJ5CN6A N.1.04 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK016
ME FW Version                  : 12.0.0.1069
Microcode version              : 0x84
Coffeelake Platform Silicon RC : 7.0.25.34
===============================================================================
[Misc]Add AMI solution to fix memory frequency show 2400MHZ when use 2667MHZ DRAM.
Fine tune DGPU_RST_PCH# to meet NV GC OFF Entry/Exit Timing sequence[refer mail: 2018/4/16 GJ5CN6X project yellow mark]

===============================================================================
BIOS File                      : GJ5CN6AN103.BIN
Checksum                       : 0xCDBDE4CB
Capsule File                   : N/A
Capsule Checksum               : N/A
Release Date                   : 2018/03/30
BIOS version                   : GJ5CN6A N.1.03 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK016
ME FW Version                  : 12.0.0.1069
Microcode version              : 0x84
Coffeelake Platform Silicon RC : 7.0.25.34
===============================================================================
1.revert 16th kernel code.
2.[Misc] 1. Disabled LFP power saving to workaround AUO panel black screen symptom.
         - Display Power Saving Technology (DPST) -> Disabled
         - Display Refresh Rate Switching (DRRS) -> Disabled
         - Panel Self Refresh (PSR) -> Disabled
         2. Set LCD PWM frequency to 1kHz to avoid LCD backlight flicker when
         plug-in AC adapter[Bug10740]
3.[haizhou20180320] Set MMIO PL1 and PL2 as EC RAM value at SMI callback.
4.Set power limit 1 time window to 56 sec.
5.[Workaround]Because ME Keyboard will be lighted when plug in AC adapter, so disable the PCH's SMBus_EC pin
6.Sync GJ5CN6A's master git
    1. Fine tune the GPU power sequence to fix NV GPU yellow mark issue[refer to e-Mail: GJ5CN6X project yellow mark]
    2. Because ME Keyboard will be lighted when plug in AC adapter, so disable the PCH's SMBus_EC pin
    3. Update EC FW to version 1.02.00
7.[Misc]The Smbios data will be preserved across BIOS update using Intel Flash
Programming Tool. It have to delete the Smbios data for factory requirements.
8.Support multiple EC ROMs for BIOS capsule update.
9.Add Workaround to disable SMbus_EC pin when S3/S4/S5 to avoid the leakage of electricity
===============================================================================
BIOS File                      : GJ5CN6AN102.BIN
Checksum                       : 0xCDBDE4CB
Capsule File                   : N/A
Capsule Checksum               : N/A
Release Date                   : 2018/03/28
BIOS version                   : GJ5CN6A N.1.02 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK017
ME FW Version                  : 12.0.0.1069
Microcode version              : 0x70
Coffeelake Platform Silicon RC : 7.0.16.43
===============================================================================
1.[Workaround]Because ME Keyboard will be lighted when plug in AC adapter, so disable the PCH's SMBus_EC pin
===============================================================================
BIOS File                      : GJ5CN6AN101.BIN
Checksum                       : 0xCDBDE4CB
Capsule File                   : N/A
Capsule Checksum               : N/A
Release Date                   : 2018/03/28
BIOS version                   : GJ5CN6A N.1.01 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK017
ME FW Version                  : 12.0.0.1069
Microcode version              : 0x70
Coffeelake Platform Silicon RC : 7.0.16.43
===============================================================================
1.sync 17th kernel code.
===============================================================================
BIOS File                      : GJ5CN6AN100.BIN
Checksum                       : 0xCDBDE4CB
Capsule File                   : N/A
Capsule Checksum               : N/A
Release Date                   : 2018/03/16
BIOS version                   : GJ5CN6A N.1.00 x64
ROM Size                       : 16M

Source Control Label           : 5.13_VEB_1AUOK014
ME FW Version                  : 12.0.0.1059
Microcode version              : 0x70
Coffeelake Platform Silicon RC : 7.0.16.43
===============================================================================
1. first release N.1.00

EC FW sürüm notları:

Kod: 
*********************************************************************************
                            GJ5CN EC RELEASE NOTE

*********************************************************************************
---------------------------------------------------------------------------------
2018/8/15                EC Version 2.00.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_20.000             Checksum:0072D5C5h
File name: GJ5CN_20.009             Checksum:006F7487h
File name: GJ5CN_20.020             Checksum:00732359h
File name: GJ5CN_20.030             Checksum:007288A7h
File name: GJ5CN_20.039             Checksum:006FD801h
File name: GJ5CN_20.050             Checksum:0072B93Bh
1.Source code update as 20180713_VGA_OFF_LoadDefault_T
2.Review new TP keep status rule
3.Support PIXART TDA9252 TP(PS2)
Note:
         Only support V1.1 MB!!
  Release Formal version "GJ5CN 2.00.00" for Non-2nd ME KB     & Pixart 10Pin TP
  Release sub version    "GJ5CN 2.00.09" for 2nd ME keyboard   & Pixart 10Pin TP
  Release sub version    "GJ5CN 2.00.20" for Haier(Non-2nd ME) & Pixart 10Pin TP
  Release sub version    "GJ5CN 2.00.30" for Non-2nd ME KB     & PS2 TP
  Release sub version    "GJ5CN 2.00.39" for 2nd ME keyboard   & PS2 TP 
  Release sub version    "GJ5CN 2.00.50" for Haier(Non-2nd ME) & PS2 TP

---------------------------------------------------------------------------------
2018/6/12                EC Version 1.08.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.800             Checksum:0072A6DBh
File name: GJ5CN_10.809             Checksum:006FC609h
File name: GJ5CN_10.820             Checksum:0072E1BBh
File name: GJ5CN_10.830             Checksum:00735702h
File name: GJ5CN_10.839             Checksum:0070BDDEh
File name: GJ5CN_10.850             Checksum:0073B43Fh
1.Support C cover light function

Note:
         Not support A phase MB!!
  Release Formal version "GJ5CN 1.08.00" for Non-2nd ME KB     & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.08.09" for 2nd ME keyboard   & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.08.20" for Haier(Non-2nd ME) & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.08.30" for Non-2nd ME KB     & PS2 TP
  Release sub version    "GJ5CN 1.08.39" for 2nd ME keyboard   & PS2 TP 
  Release sub version    "GJ5CN 1.08.50" for Haier(Non-2nd ME) & PS2 TP

---------------------------------------------------------------------------------
2018/5/31                EC Version 1.07.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.700             Checksum:00727992h
File name: GJ5CN_10.709             Checksum:006F9CD4h
File name: GJ5CN_10.720             Checksum:0072C15Dh
File name: GJ5CN_10.730             Checksum:00735D0Ah
File name: GJ5CN_10.739             Checksum:00709D0Ch
File name: GJ5CN_10.750             Checksum:0073935Eh
1.KBID update for 2nd ME KB

Note:
         Not support A phase MB!!
  Release Formal version "GJ5CN 1.07.00" for Non-2nd ME KB     & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.07.09" for 2nd ME keyboard   & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.07.20" for Haier(Non-2nd ME) & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.07.30" for Non-2nd ME KB     & PS2 TP
  Release sub version    "GJ5CN 1.07.39" for 2nd ME keyboard   & PS2 TP 
  Release sub version    "GJ5CN 1.07.50" for Haier(Non-2nd ME) & PS2 TP

---------------------------------------------------------------------------------
2018/5/22                EC Version 1.06.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.600             Checksum:007279A5h
File name: GJ5CN_10.609             Checksum:00700C59h
File name: GJ5CN_10.620             Checksum:0072C170h
File name: GJ5CN_10.630             Checksum:00735D1Dh
File name: GJ5CN_10.639             Checksum:007126A1h
File name: GJ5CN_10.650             Checksum:00739371h
1.Modify scan speed of 2nd ME KB from 500us to 1ms
2.Support Fn+Home/End as SysReq/Scroll Lock for 2nd ME KB
3.Source code update as 2018/5/17 "Update 2nd ME KB modified Fn+Insert as PrtSc"
4.Add KBID for auto detect
Note:
         Not support A phase MB!!
  Release Formal version "GJ5CN 1.06.00" for Non-2nd ME KB     & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.06.09" for 2nd ME keyboard   & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.06.20" for Haier(Non-2nd ME) & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.06.30" for Non-2nd ME KB     & PS2 TP
  Release sub version    "GJ5CN 1.06.39" for 2nd ME keyboard   & PS2 TP 
  Release sub version    "GJ5CN 1.06.50" for Haier(Non-2nd ME) & PS2 TP

---------------------------------------------------------------------------------
2018/4/19                 EC Version 1.05.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.500             Checksum:00729D56h
File name: GJ5CN_10.509             Checksum:00700F77h
File name: GJ5CN_10.520             Checksum:0072EE10h
File name: GJ5CN_10.530             Checksum:0073A519h
File name: GJ5CN_10.539             Checksum:00710E66h
File name: GJ5CN_10.550             Checksum:0073A71Bh
1.Support TTM
2.Support Japanese 2nd ME KB "change/not change"
3.Don't send Q76 when plug out HDMI cable
4.Modify thermal patch process
Note:
         Not support A phase MB!!
  Release Formal version "GJ5CN 1.05.00" for Non-2nd ME KB     & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.05.09" for 2nd ME keyboard   & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.05.20" for Haier(Non-2nd ME) & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.05.30" for Non-2nd ME KB     & PS2 TP
  Release sub version    "GJ5CN 1.05.39" for 2nd ME keyboard   & PS2 TP 
  Release sub version    "GJ5CN 1.05.50" for Haier(Non-2nd ME) & PS2 TP

---------------------------------------------------------------------------------
2018/3/30                 EC Version 1.04.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.400             Checksum:007346B2h
File name: GJ5CN_10.409             Checksum:0070EC17h
File name: GJ5CN_10.420             Checksum:00738286h
File name: GJ5CN_10.430             Checksum:00743399h
File name: GJ5CN_10.439             Checksum:00718418h
File name: GJ5CN_10.440             Checksum:007397F3h
File name: GJ5CN_10.450             Checksum:00749671h
1.Fix Num OSD issue
2.Update thermal table as 20180330
3.Add solution for Synaptics TP
4.Patch battery capacity loss
5.Modify scan code for Pixart 10pin TP on/off

Note:
         Not support A phase MB!!
  Release Formal version "GJ5CN 1.04.00" for Non-2nd ME KB      & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.04.09" for 2nd ME keyboard    & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.04.20" for Haier(Non-2nd ME)  & Pixart 10Pin TP
  Release sub version    "GJ5CN 1.04.30" for Non-2nd ME KB      & PS2 TP
  Release sub version    "GJ5CN 1.04.39" for 2nd ME keyboard    & PS2 TP 
  Release sub version    "GJ5CN 1.04.40" for Turkish(Non-2nd ME)& Pixart 10Pin TP
  Release sub version    "GJ5CN 1.04.50" for Haier(Non-2nd ME)  & PS2 TP

---------------------------------------------------------------------------------
2018/3/27                 EC Version 1.03.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.300             Checksum:0073406Ah
File name: GJ5CN_10.309             Checksum:0070DD31h
File name: GJ5CN_10.320             Checksum:00738E49h
File name: GJ5CN_10.330             Checksum:0073630Fh
File name: GJ5CN_10.339             Checksum:0070AB03h
File name: GJ5CN_10.340             Checksum:00737BC7h
File name: GJ5CN_10.350             Checksum:0073AF89h
1.Set TP PS2 input pin during S0 for Pixart 10pin

Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 1.03.00" for Non-2nd ME KB   & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.03.09" for 2nd ME keyboard & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.03.20" for Haier       & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.03.30" for Non-2nd ME KB   & PS2 TP
     Release sub version    "GJ5CN 1.03.39" for 2nd ME keyboard & PS2 TP 
     Release sub version    "GJ5CN 1.03.40" for Turkish KB      & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.03.50" for Haier       & PS2 TP

---------------------------------------------------------------------------------
2018/3/24                 EC Version 1.02.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.200             Checksum:00734362h
File name: GJ5CN_10.209             Checksum:0070F1D8h
File name: GJ5CN_10.220             Checksum:0073AB8Ch
File name: GJ5CN_10.230             Checksum:0073630Eh
File name: GJ5CN_10.239             Checksum:0070AB02h
File name: GJ5CN_10.240             Checksum:0073871Bh
File name: GJ5CN_10.250             Checksum:0073AF88h
1.Update APC setting
2.Set PM_RSMRST# output low during GPIO initial
3.Modify TP PS2 & SMBUS1 sequence
4.Set SMBUS1 & PS2 output low for S3/S4/S5
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 1.02.00" for Non-2nd ME KB   & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.02.09" for 2nd ME keyboard & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.02.20" for Haier       & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.02.30" for Non-2nd ME KB   & PS2 TP
     Release sub version    "GJ5CN 1.02.39" for 2nd ME keyboard & PS2 TP 
     Release sub version    "GJ5CN 1.02.40" for Turkish KB      & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.02.50" for Haier       & PS2 TP

---------------------------------------------------------------------------------
2018/3/21                 EC Version 1.01.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.100             Checksum: 00744B19h
File name: GJ5CN_10.109             Checksum: 00713768h
File name: GJ5CN_10.130             Checksum: 0072BDACh
File name: GJ5CN_10.139             Checksum: 0070BD62h
File name: GJ5CN_10.140             Checksum: 0074D32Dh
1.Modify KB backlight level(0x16 --> 0x24) for S3 resume
2.Remove some redundant code
3.AP Winlock Trigger DeBounce 1sec
4.Add solution for ZIROI instability
5.Modify battery EEPROM sequence
6.Update key buffer size
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 1.01.00" for Non-2nd ME KB   & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.01.30" for Non-2nd ME KB   & PS2 TP
     Release sub version    "GJ5CN 1.01.09" for 2nd ME keyboard & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.01.39" for 2nd ME keyboard & PS2 TP 
     Release sub version    "GJ5CN 1.01.40" for Turkish KB      & Pixart 10Pin TP

---------------------------------------------------------------------------------
2018/3/9                 EC Version 1.00.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_10.000             Checksum: 0072E1ADh
File name: GJ5CN_10.009             Checksum: 006F4C84h
File name: GJ5CN_10.030             Checksum: 00713140h
File name: GJ5CN_10.039             Checksum: 006EDB5Ah
File name: GJ5CN_10.040             Checksum: 0072E92Ah
1.Fix AP can't activate Power USB function
2.Add WLAN WA for S3/S4 resume
3.Update fan table as 20180307
4.Remove the Restriction of ZIROI Calibration
5.Support Japanese KB for 2nd ME KB
6.Fix D-state error when DC mode to AC mode
7.Add "ECVER" signature for BIOS dentify EC bin file version
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 1.00.00" for Non-2nd ME KB   & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.00.30" for Non-2nd ME KB   & PS2 TP
     Release sub version    "GJ5CN 1.00.09" for 2nd ME keyboard & Pixart 10Pin TP
     Release sub version    "GJ5CN 1.00.39" for 2nd ME keyboard & PS2 TP 
     Release sub version    "GJ5CN 1.00.40" for Turkish KB      & Pixart 10Pin TP

---------------------------------------------------------------------------------
2018/3/6                 EC Version 0.14.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_01.400             Checksum: 0072E2A8h
File name: GJ5CN_01.410             Checksum: 007130BAh
File name: GJ5CN_01.420             Checksum: 006F884Fh
File name: GJ5CN_01.430             Checksum: 006ED705h
1.Update 2nd ME KB ID
2.Modify power on sequence for F3 F4 error
3.Change EC debug IO from 4E4F to 6E6F
4.Modify PL3/PL4 value in AC mode
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.14.00" for Non-2nd ME KB   & Pixart 10Pin TP
     Release sub version    "GJ5CN 0.14.10" for Non-2nd ME KB   & PS2 TP
     Release sub version    "GJ5CN 0.14.20" for 2nd ME keyboard & Pixart 10Pin TP
     Release sub version    "GJ5CN 0.14.30" for 2nd ME keyboard & PS2 TP

---------------------------------------------------------------------------------
2018/3/1                 EC Version 0.13.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_01.300             Checksum: 0072A565h
File name: GJ5CN_01.310             Checksum: 00712BEBh
File name: GJ5CN_01.320             Checksum: 006F5C27h
File name: GJ5CN_01.330             Checksum: 006F34DEh
1.Modify eDP sequence as EE required
2.Set mute active early when power on
3.Update WA3081
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.13.00" for Non-2nd ME KB   & Pixart 10Pin TP
     Release sub version    "GJ5CN 0.13.10" for Non-2nd ME KB   & PS2 TP
     Release sub version    "GJ5CN 0.13.20" for 2nd ME keyboard & Pixart 10Pin TP
     Release sub version    "GJ5CN 0.13.30" for 2nd ME keyboard & PS2 TP

---------------------------------------------------------------------------------
2018/2/9                 EC Version 0.12.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_01.200             Checksum: 006F6166h
File name: GJ5CN_01.220             Checksum: 006F685Eh
1.Add EC update 20180130_Tim AP warning function
2.Patch for Myfan2 virtual scan code error£¨ADh£©
3.Update Pixart TP code
4.Update DC mode performance
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.12.00" for Standard(Non-2nd ME KB & PS2 TP)
     Release sub version    "GJ5CN 0.12.20" for 2nd ME keyboard & PS2 TP
     Release sub version    "GJ5CN 0.12.30" for 2nd ME keyboard & Pixart 10Pin TP

---------------------------------------------------------------------------------
2018/2/6                 EC Version 0.11.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_01.100             Checksum: 007204EDh
1.Patch code for 2nd ME keyboard S0-service key
2.Support VGA SCI shut down
2.Review FanBoost & UserFan control flag
4.Set GPH3 as ID pin to distinguish ID4 & ID A/E
5.Set EC project ID as 0x05 for GJxCN-series
6.Enable WA3081
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.11.00" for Standard
     Release sub version    "GJ5CN 0.11.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2018/1/25                 EC Version 0.10.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_01.000             Checksum: 00729383h
1.Update Ivan rule(battery mode + heavy loading + RSOC<15%,EC_PROCHOT active)
2.Review GPIO for B phase schematic
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.10.00" for Standard
     Release sub version    "GJ5CN 0.10.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2018/1/18                 EC Version 0.08.00(A1)             Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.800             Checksum: 007288CBh
1.Add SMBus error bit patch code
2.Support new adapter type setting by oemservice
3.Support MyFan2
4.Modify power on sequence(PM_RSMRST#)
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.08.00" for Standard
     Release sub version    "GJ5CN 0.08.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2018/1/10                 EC Version 0.07.00(A1)             Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.700             Checksum: 00738C84h
1.Support ME unlock
2.Add two patch in SMBUS
3.Update fan talbe as 20180109
4.Support new Ivan rule
5.Set GPA1 & GPA3 & GPA6 input pin as no light bar 
6.Update Keyboard ID & scancode 500us for 2nd ME keyboard
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.07.00" for Standard
     Release sub version    "GJ5CN 0.07.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2018/1/2                 EC Version 0.06.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.600             Checksum: 00746F7Ah
1.Add 2nd ME keyboard on key press function
2.Add check PM_SLP_S3/4 time out function
Note:
         Not support A phase MB!!
     Release Formal version "GJ5CN 0.06.00" for Standard
     Release sub version    "GJ5CN 0.06.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2017/12/22                 EC Version 0.05.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.500             Checksum: 0074E5AEh
1.Remove some reluctant code in sequence
2.Set MEKB_ON high during GPIO initial
Note:
         Only for A1 phase MB!!
     Release Formal version "GJ5CN 0.05.00" for Standard
     Release sub version    "GJ5CN 0.05.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2017/12/18                 EC Version 0.04.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.400             Checksum: 00749443h
1.Fix Qkey LED behavior
2.Review GPIO as A1 phase schematic changed
Note:
         Only for A1 phase MB!!
     Release Formal version "GJ5CN 0.04.00" for Standard
     Release sub version    "GJ5CN 0.04.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2017/12/6                 EC Version 0.03.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.300             Checksum: 0074904Ch
1.Allow do SLP_S4 & SLP_S3 detect durning PowerOn 10sec
2.Fix mute pin error
3.Remove some reluctant code
Note:
     Release Formal version "GJ5CN 0.03.00" for Standard
     Release sub version    "GJ5CN 0.03.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2017/11/28                 EC Version 0.02.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.200            Checksum: 00724B82h
1.Set ME_WE# output low during GPIO initial
2.Support Pixart TDA9860 touch pad
3.Set the ratio of IADP voltage over the voltage across ACP & ACN to 40 as
  R sense changed to 5mohm(ChargeOption1 of BQ24781)
Note:
     Release Formal version "GJ5CN 0.02.00" for Standard
     Release sub version    "GJ5CN 0.02.20" for 2nd ME keyboard

---------------------------------------------------------------------------------
2017/11/15                 EC Version 0.01.00                 Owner: Haidi
---------------------------------------------------------------------------------
File name: GJ5CN_00.100            Checksum: 0074170Bh
1.First release for A SMT

Güncelleme rehberi:

EFI Shell EC Firmware/BIOS Güncelleme

EC firmware güncellemesini ifux64.efi ile yapmak için aşağıdaki yolu ilzeyebilirsiniz: Boş bir FAT32 USB bellek hazırlayın ve bütün dosyaları bu belleğe çıkartın. Laptop güç bağlantısını takın. Cihazı çalıştırın ve art arda F2 tuşuna basarak BIOS'a girin. BIOS'ta Security > Secure Boot >...
www.technopat.net www.technopat.net
 
Dediğiniz şeyleri yaptım F7-F10 tuşlarına bastığımda 3. ekran geliyor. Flash takılı haldeyken 1.normal başlatıyor. 2. seçenek BIOS ekranına dönüyor yardımcı olur musunuz?
 

Dosya Ekleri

  • WhatsApp Image 2019-05-28 at 21.17.24(1).jpeg
    WhatsApp Image 2019-05-28 at 21.17.24(1).jpeg
    151,6 KB · Görüntüleme: 310
  • WhatsApp Image 2019-05-28 at 21.17.24.jpeg
    WhatsApp Image 2019-05-28 at 21.17.24.jpeg
    122,9 KB · Görüntüleme: 309
  • WhatsApp Image 2019-05-28 at 21.17.23.jpeg
    WhatsApp Image 2019-05-28 at 21.17.23.jpeg
    125,7 KB · Görüntüleme: 339
Son düzenleyen: Moderatör:
@LockDownTR Attığınız dosyanın içinde güncelleme dosyası zaten var. BIOS\FlashUtil\AfuWin64 içinde F.bat dosyasını yönetici olarak çalıştırın.

Rehbere göre güncelleyecekseniz FAT32 olarak biçimlendirilmiş USB belleğin içine bütün dosyaları atın.
 
166079 dedi:
@LockDownTR Attığınız dosyanın içinde güncelleme dosyası zaten var. BIOS\FlashUtil\AfuWin64 içinde F.bat dosyasını yönetici olarak çalıştırın.

Rehbere göre güncelleyecekseniz FAT32 olarak biçimlendirilmiş USB belleğin içine bütün dosyaları atın.
Genişletmek için tıkla...
EC klasöründeki 3 dosyayı mı flasha atıcam sadece ?
 
Uyarı! Bu konu 7 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Benzer konular

O
Monster T5 BIOS Güncellemesi
Mesaj
1
Görüntüleme
1.043
Pitbull
Pitbull
batuhan erdeğer
  • Soru
Monster Abra 17.1 BIOS güncellemesi nereden bulunur?
Mesaj
3
Görüntüleme
544
181951
181951
AzizTürk
Monster laptop BIOS güncellemesi nasıl yapılır?
Mesaj
7
Görüntüleme
316
AzizTürk
AzizTürk
B
  • Soru
Monster Tulpar T5 v21.6 BIOS güncelleme nasıl yapılır?
2
Mesaj
14
Görüntüleme
2.567
TANER006
T
E
Monster Abra v16.7 BIOS güncellemesi nasıl yapılır?
Mesaj
0
Görüntüleme
638
ekcyigitt
E

Technopat Haberler

Yeni konular

Yeni mesajlar

Geri
Yukarı
09:05:00