Çözüldü R5 5600 RX 6700 XT Six: Siege oynarken mavi ekran hatası

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
İşletim sistemi
Windows 10

almightybls

Centipat
Katılım
23 Nisan 2023
Mesajlar
275
Çözümler
1
RAM
Adata XPG 16GB (2×8) 3200MHz DDR4 Single Kit Ram AX4U32008G16A-SR30
SSD veya HDD modeli
WD Blue SN570 500GB GEN3X4 M.2 SSD 3500MB Okuma /
Ekran kartı
ASUS Radeon RX 6700 XT DUAL 12GB GDDR6 192 Bit Ekr
Anakart
ASUS B450M DRAGON 4400MHz(OC) DDR4 Soket AM4 M.2 m
İşlemci
AMD Ryzen 5 5600 3.5GHz 32MB Önbellek 6 Çekirdek A
Sistemim yeni, kardeşim Rainbow Six: Siege Alt Tab'dayken bir anda bilgisayar mavi ekran hatası verdi. Sistemden garip bir ses geldi ve kendini yeniden başlattı. Minidump'da bulunan dosyaları RAR'a attım. Ayın dördünde de minidump dosyası oluşturmuş şimdi hatırladım o tarihte de mavi ekran hatası almıştı bilgisayar.
 
Son düzenleme:
Çözüm
BIOS güncelle.


Realtek ve chipset hariç diğer tüm sürücüleri burada yükleyin.


Realtek Ethernet sürücüsü güncelleyin.


Chipset sürücüsünü Denetim Masası'ndan silin ardından en güncel sürücüyü yükleyin.


RNDISMP6.sys ve usb80236.sys düzgün yüklenmediğini görüyorum.

RNDISMP6.sys dosyası telefonun internetini USB aracılığıyla tethering şeklinde bilgisayara bağlayınca ortaya çıkar. Eğer farklı alternatifin varsa telefon interneti kullanmayın. Ev interneti mevcut ise kablolu bir bağlantı yapın.

CMD yönetici olarak çalışıtırıp sfc/scannow komutunu girin ve %100 olmasını bekleyin.

Asıl sorun Sorun BattlEye kaynaklı, anti-hile programı. Kaldırıp yeniden kurmayı deneyin. Onun Script'i olması lazım oyunun Redist klasöründe.

C:\Program Files (X86)\Common Files\BattlEye klasörünü silin ve Epic Games üzerinden Fornite oyununu Onar seçeneği ile tekrar BattlEye inmesini sağlayın.

Kod:
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffffffffffff8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8055481e00a, address which referenced memory

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 3280

    Key  : Analysis.Elapsed.mSec
    Value: 3289

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 6468

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14899

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 97

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0xa

    Key  : Failure.Bucket
    Value: AV_BEDaisy!unknown_function

    Key  : Failure.Hash
    Value: {36b04c21-521f-babb-382f-2a12c3ddef17}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  a

BUGCHECK_P1: fffffffffffffff8

BUGCHECK_P2: 2

BUGCHECK_P3: 0

BUGCHECK_P4: fffff8055481e00a

FILE_IN_CAB:  070723-6156-01.dmp

READ_ADDRESS: Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
 fffffffffffffff8

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

TRAP_FRAME:  fffff60903eb7240 -- (.trap 0xfffff60903eb7240)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000000000a008 rbx=0000000000000000 rcx=0000000000009896
rdx=ffffc40008a4d1e0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8055481e00a rsp=fffff60903eb73d0 rbp=0000000be9d5cc3c
 r8=0000000be9d52c34  r9=fffff80551799b70 r10=fffff80551796ac0
r11=fffff60903eb7400 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac pe cy
nt!KiInsertTimerTable+0x21a:
fffff805`5481e00a 483b6ef8        cmp     rbp,qword ptr [rsi-8] ds:ffffffff`fffffff8=????????????????
Resetting default scope

STACK_TEXT: 
fffff609`03eb70f8 fffff805`54a10029     : 00000000`0000000a ffffffff`fffffff8 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff609`03eb7100 fffff805`54a0bbe3     : 00000000`00000fff 00000000`00000fff 00000000`000003ff fffff805`00000000 : nt!KiBugCheckDispatch+0x69
fffff609`03eb7240 fffff805`5481e00a     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x463
fffff609`03eb73d0 fffff805`5481c15d     : ffffc400`10383080 00000000`00000000 00000000`00000000 fffff805`00000000 : nt!KiInsertTimerTable+0x21a
fffff609`03eb7450 fffff805`5481b793     : fffff805`00000075 fffff805`00000000 ffff9d86`5c846600 ffffc400`103831c0 : nt!KiCommitThreadWait+0x3bd
fffff609`03eb74f0 fffff807`88f18815     : ffffc400`10f5c738 ffffc400`00000000 ffff9d86`52f0d000 00000000`00000000 : nt!KeWaitForSingleObject+0x233
fffff609`03eb75e0 ffffc400`10f5c738     : ffffc400`00000000 ffff9d86`52f0d000 00000000`00000000 fffff609`00000002 : BEDaisy+0x328815
fffff609`03eb75e8 ffffc400`00000000     : ffff9d86`52f0d000 00000000`00000000 fffff609`00000002 00000000`00000000 : 0xffffc400`10f5c738
fffff609`03eb75f0 ffff9d86`52f0d000     : 00000000`00000000 fffff609`00000002 00000000`00000000 00000000`00000000 : 0xffffc400`00000000
fffff609`03eb75f8 00000000`00000000     : fffff609`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff9d86`52f0d000


SYMBOL_NAME:  BEDaisy+328815

MODULE_NAME: BEDaisy

IMAGE_NAME:  BEDaisy.sys

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  328815

FAILURE_BUCKET_ID:  AV_BEDaisy!unknown_function

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {36b04c21-521f-babb-382f-2a12c3ddef17}

Followup:     MachineOwner
---------

Düzgün paylaşın.
 
BIOS güncelle.


Realtek ve chipset hariç diğer tüm sürücüleri burada yükleyin.


Realtek Ethernet sürücüsü güncelleyin.


Chipset sürücüsünü Denetim Masası'ndan silin ardından en güncel sürücüyü yükleyin.


RNDISMP6.sys ve usb80236.sys düzgün yüklenmediğini görüyorum.

RNDISMP6.sys dosyası telefonun internetini USB aracılığıyla tethering şeklinde bilgisayara bağlayınca ortaya çıkar. Eğer farklı alternatifin varsa telefon interneti kullanmayın. Ev interneti mevcut ise kablolu bir bağlantı yapın.

CMD yönetici olarak çalışıtırıp sfc/scannow komutunu girin ve %100 olmasını bekleyin.

Asıl sorun Sorun BattlEye kaynaklı, anti-hile programı. Kaldırıp yeniden kurmayı deneyin. Onun Script'i olması lazım oyunun Redist klasöründe.

C:\Program Files (X86)\Common Files\BattlEye klasörünü silin ve Epic Games üzerinden Fornite oyununu Onar seçeneği ile tekrar BattlEye inmesini sağlayın.

Kod:
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffffffffffff8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8055481e00a, address which referenced memory

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 3280

    Key  : Analysis.Elapsed.mSec
    Value: 3289

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 6468

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14899

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 97

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0xa

    Key  : Failure.Bucket
    Value: AV_BEDaisy!unknown_function

    Key  : Failure.Hash
    Value: {36b04c21-521f-babb-382f-2a12c3ddef17}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  a

BUGCHECK_P1: fffffffffffffff8

BUGCHECK_P2: 2

BUGCHECK_P3: 0

BUGCHECK_P4: fffff8055481e00a

FILE_IN_CAB:  070723-6156-01.dmp

READ_ADDRESS: Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
 fffffffffffffff8

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

TRAP_FRAME:  fffff60903eb7240 -- (.trap 0xfffff60903eb7240)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000000000a008 rbx=0000000000000000 rcx=0000000000009896
rdx=ffffc40008a4d1e0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8055481e00a rsp=fffff60903eb73d0 rbp=0000000be9d5cc3c
 r8=0000000be9d52c34  r9=fffff80551799b70 r10=fffff80551796ac0
r11=fffff60903eb7400 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac pe cy
nt!KiInsertTimerTable+0x21a:
fffff805`5481e00a 483b6ef8        cmp     rbp,qword ptr [rsi-8] ds:ffffffff`fffffff8=????????????????
Resetting default scope

STACK_TEXT: 
fffff609`03eb70f8 fffff805`54a10029     : 00000000`0000000a ffffffff`fffffff8 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff609`03eb7100 fffff805`54a0bbe3     : 00000000`00000fff 00000000`00000fff 00000000`000003ff fffff805`00000000 : nt!KiBugCheckDispatch+0x69
fffff609`03eb7240 fffff805`5481e00a     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x463
fffff609`03eb73d0 fffff805`5481c15d     : ffffc400`10383080 00000000`00000000 00000000`00000000 fffff805`00000000 : nt!KiInsertTimerTable+0x21a
fffff609`03eb7450 fffff805`5481b793     : fffff805`00000075 fffff805`00000000 ffff9d86`5c846600 ffffc400`103831c0 : nt!KiCommitThreadWait+0x3bd
fffff609`03eb74f0 fffff807`88f18815     : ffffc400`10f5c738 ffffc400`00000000 ffff9d86`52f0d000 00000000`00000000 : nt!KeWaitForSingleObject+0x233
fffff609`03eb75e0 ffffc400`10f5c738     : ffffc400`00000000 ffff9d86`52f0d000 00000000`00000000 fffff609`00000002 : BEDaisy+0x328815
fffff609`03eb75e8 ffffc400`00000000     : ffff9d86`52f0d000 00000000`00000000 fffff609`00000002 00000000`00000000 : 0xffffc400`10f5c738
fffff609`03eb75f0 ffff9d86`52f0d000     : 00000000`00000000 fffff609`00000002 00000000`00000000 00000000`00000000 : 0xffffc400`00000000
fffff609`03eb75f8 00000000`00000000     : fffff609`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff9d86`52f0d000


SYMBOL_NAME:  BEDaisy+328815

MODULE_NAME: BEDaisy

IMAGE_NAME:  BEDaisy.sys

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  328815

FAILURE_BUCKET_ID:  AV_BEDaisy!unknown_function

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {36b04c21-521f-babb-382f-2a12c3ddef17}

Followup:     MachineOwner
---------
 
Çözüm
BIOS güncelle.


Realtek ve chipset hariç diğer tüm sürücüleri burada yükleyin.


Realtek Ethernet sürücüsü güncelleyin.


Chipset sürücüsünü Denetim Masası'ndan silin ardından en güncel sürücüyü yükleyin.


RNDISMP6.sys ve usb80236.sys düzgün yüklenmediğini görüyorum.

RNDISMP6.sys dosyası telefonun internetini USB aracılığıyla tethering şeklinde bilgisayara bağlayınca ortaya çıkar. Eğer farklı alternatifin varsa telefon interneti kullanmayın. Ev interneti mevcut ise kablolu bir bağlantı yapın.

CMD yönetici olarak çalışıtırıp sfc/scannow komutunu girin ve %100 olmasını bekleyin.

Asıl sorun Sorun BattlEye kaynaklı, anti-hile programı. Kaldırıp yeniden kurmayı deneyin. Onun Script'i olması lazım oyunun Redist klasöründe.

C:\Program Files (X86)\Common Files\BattlEye klasörünü silin ve Epic Games üzerinden Fornite oyununu Onar seçeneği ile tekrar BattlEye inmesini sağlayın.

Kod:
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffffffffffff8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8055481e00a, address which referenced memory

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 3280

    Key  : Analysis.Elapsed.mSec
    Value: 3289

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 6468

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14899

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 97

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0xa

    Key  : Failure.Bucket
    Value: AV_BEDaisy!unknown_function

    Key  : Failure.Hash
    Value: {36b04c21-521f-babb-382f-2a12c3ddef17}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  a

BUGCHECK_P1: fffffffffffffff8

BUGCHECK_P2: 2

BUGCHECK_P3: 0

BUGCHECK_P4: fffff8055481e00a

FILE_IN_CAB:  070723-6156-01.dmp

READ_ADDRESS: Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
 fffffffffffffff8

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

TRAP_FRAME:  fffff60903eb7240 -- (.trap 0xfffff60903eb7240)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000000000a008 rbx=0000000000000000 rcx=0000000000009896
rdx=ffffc40008a4d1e0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8055481e00a rsp=fffff60903eb73d0 rbp=0000000be9d5cc3c
 r8=0000000be9d52c34  r9=fffff80551799b70 r10=fffff80551796ac0
r11=fffff60903eb7400 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac pe cy
nt!KiInsertTimerTable+0x21a:
fffff805`5481e00a 483b6ef8        cmp     rbp,qword ptr [rsi-8] ds:ffffffff`fffffff8=????????????????
Resetting default scope

STACK_TEXT:
fffff609`03eb70f8 fffff805`54a10029     : 00000000`0000000a ffffffff`fffffff8 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff609`03eb7100 fffff805`54a0bbe3     : 00000000`00000fff 00000000`00000fff 00000000`000003ff fffff805`00000000 : nt!KiBugCheckDispatch+0x69
fffff609`03eb7240 fffff805`5481e00a     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x463
fffff609`03eb73d0 fffff805`5481c15d     : ffffc400`10383080 00000000`00000000 00000000`00000000 fffff805`00000000 : nt!KiInsertTimerTable+0x21a
fffff609`03eb7450 fffff805`5481b793     : fffff805`00000075 fffff805`00000000 ffff9d86`5c846600 ffffc400`103831c0 : nt!KiCommitThreadWait+0x3bd
fffff609`03eb74f0 fffff807`88f18815     : ffffc400`10f5c738 ffffc400`00000000 ffff9d86`52f0d000 00000000`00000000 : nt!KeWaitForSingleObject+0x233
fffff609`03eb75e0 ffffc400`10f5c738     : ffffc400`00000000 ffff9d86`52f0d000 00000000`00000000 fffff609`00000002 : BEDaisy+0x328815
fffff609`03eb75e8 ffffc400`00000000     : ffff9d86`52f0d000 00000000`00000000 fffff609`00000002 00000000`00000000 : 0xffffc400`10f5c738
fffff609`03eb75f0 ffff9d86`52f0d000     : 00000000`00000000 fffff609`00000002 00000000`00000000 00000000`00000000 : 0xffffc400`00000000
fffff609`03eb75f8 00000000`00000000     : fffff609`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff9d86`52f0d000


SYMBOL_NAME:  BEDaisy+328815

MODULE_NAME: BEDaisy

IMAGE_NAME:  BEDaisy.sys

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  328815

FAILURE_BUCKET_ID:  AV_BEDaisy!unknown_function

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {36b04c21-521f-babb-382f-2a12c3ddef17}

Followup:     MachineOwner
---------
Çok teşekkür ederim hocam, kardeşimle konuştum ve bana tethering yoluyla internete bağlandığını söyledi. Bu bilgiyi belirtemememden dolayı kusuruma bakmayın, herhangi bir donanımsal sorun bulunmakta mı?
 
Çok teşekkür ederim hocam, kardeşimle konuştum ve bana tethering yoluyla internete bağlandığını söyledi. Bu bilgiyi belirtemememden dolayı kusuruma bakmayın, herhangi bir donanımsal sorun bulunmakta mı?

Bunu bu şekilde anlamak o kadar basit değil lakin genel olarak %99 yazılımsal sorun olduğunu söyleyebilirim dediğim adımları yapın büyük ihtimalle çözülecektir.
 

Yeni konular

Geri
Yukarı