THREAD_STUCK_IN_DEVICE_DRIVER mavi ekran

Katılım
11 Temmuz 2019
Mesajlar
2.292
Makaleler
1
Çözümler
5
Minidump dosyası: 050520-14734-01.dmp

Sistemim:

Intel Pentium G4400.
Gigabyte RX 580 4 GB.
8 GB tek slot RAM.
Samsung 860 Evo M.2 500 GB.

Ekran kartını değiştirdiğimden beri sorun yaşıyorum.
Oyun oynarken aşırı ısınma yaşıyorum +80 dereceyi görüyor.
İkide bir ekranım kapanıyor şöyle deyim ekran tamamen farklı renge dönüyor ve restart atmazsam düzelmiyor.
Bazen mavi ekran yiyoruum bir danışayım dedim.
Yardımı geçen herkese şimdiden teşekkür ediyorum.
 
Minidump dosyası: 050520-14734-01.dmp

Sistemim:

Intel Pentium G4400.
Gigabyte RX 580 4 GB.
8 GB tek slot RAM.
Samsung 860 Evo M.2 500 GB.

Ekran kartını değiştirdiğimden beri sorun yaşıyorum.
Oyun oynarken aşırı ısınma yaşıyorum +80 dereceyi görüyor.
İkide bir ekranım kapanıyor şöyle deyim ekran tamamen farklı renge dönüyor ve restart atmazsam düzelmiyor.
Bazen mavi ekran yiyoruum bir danışayım dedim.
Yardımı geçen herkese şimdiden teşekkür ediyorum.
Sorun ekran kartında gibi. Önceden Valorant oynadıysanız bu hata gayet normal DDU yapın ve eski sürücüyü yükleyin.
 
Dosyayı inceledin mi? Ben Volarant ile bir laka göremedim.

Ekran kartı sorunu gibi. OC varsa kaldırın. Ayrıca kartınızı OCCT ile test edebilirsiniz.

Kod:
THREAD_STUCK_IN_DEVICE_DRIVER (ea)
The device driver is spinning in an infinite loop, most likely waiting for
hardware to become idle. This usually indicates problem with the hardware
itself or with the device driver programming the hardware incorrectly.
If the kernel debugger is connected and running when watchdog detects a
timeout condition then DbgBreakPoint() will be called instead of KeBugCheckEx()
and detailed message including bugcheck arguments will be printed to the
debugger. This way we can identify an offending thread, set breakpoints in it,
and hit go to return to the spinning code to debug it further. Because
KeBugCheckEx() is not called the .bugcheck directive will not return bugcheck
information in this case. The arguments are already printed out to the kernel
debugger. You can also retrieve them from a global variable via
"dd watchdog!g_WdBugCheckData l5" (use dq on NT64).
On MP machines (OS builds <= 3790) it is possible to hit a timeout when the spinning thread is
interrupted by hardware interrupt and ISR or DPC routine is running at the time
of the bugcheck (this is because the timeout's work item can be delivered and
handled on the second CPU and the same time). If this is the case you will have
to look deeper at the offending thread's stack (e.g. using dds) to determine
spinning code which caused the timeout to occur.
Arguments:
Arg1: ffff9b0d04157440, Pointer to a stuck thread object.  Do .thread then kb on it to find
    the hung location.
Arg2: 0000000000000000, Pointer to a DEFERRED_WATCHDOG object.
Arg3: 0000000000000000, Pointer to offending driver name.
Arg4: 0000000000000000, Number of times this error occurred.  If a debugger is attached,
    this error is not always fatal -- see DESCRIPTION below.  On the
    blue screen, this will always equal 1.

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for atikmdag.sys

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.Sec
    Value: 1

    Key  : Analysis.DebugAnalysisProvider.CPP
    Value: Create: 8007007e on DESKTOP-B5A9UVN

    Key  : Analysis.DebugData
    Value: CreateObject

    Key  : Analysis.DebugModel
    Value: CreateObject

    Key  : Analysis.Elapsed.Sec
    Value: 3

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 74

    Key  : Analysis.System
    Value: CreateObject


ADDITIONAL_XML: 1

DUMP_FILE_ATTRIBUTES: 0x8
  Kernel Generated Triage Dump

BUGCHECK_CODE:  ea

BUGCHECK_P1: ffff9b0d04157440

BUGCHECK_P2: 0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

FAULTING_THREAD:  ffff9b0d04157440

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXPNP: 1 (!blackboxpnp)


CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

STACK_TEXT:
fffff487`89b467a8 fffff805`49a9a7f5 : 00000000`000000ea ffff9b0d`04157440 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff487`89b467b0 fffff805`49a9a8ca : fffff487`89b46890 fffff805`49a76d9b fffff487`89b46890 fffff805`51571da4 : dxgkrnl!TdrTimedOperationBugcheckOnTimeout+0x45
fffff487`89b46820 fffff805`514c8880 : 0000000a`3e610a34 fffff805`51571da4 00000000`00000000 ffff9b0d`00b63000 : dxgkrnl!TdrTimedOperationDelay+0xca
fffff487`89b46860 0000000a`3e610a34 : fffff805`51571da4 00000000`00000000 ffff9b0d`00b63000 00000000`00989680 : atikmdag+0x68880
fffff487`89b46868 fffff805`51571da4 : 00000000`00000000 ffff9b0d`00b63000 00000000`00989680 00000000`00000001 : 0x0000000a`3e610a34
fffff487`89b46870 00000000`00000000 : ffff9b0d`00b63000 00000000`00989680 00000000`00000001 00000000`00000028 : atikmdag+0x111da4


STACK_COMMAND:  .thread 0xffff9b0d04157440 ; kb

SYMBOL_NAME:  dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45

MODULE_NAME: dxgkrnl

IMAGE_NAME:  dxgkrnl.sys

IMAGE_VERSION:  10.0.17763.1158

FAILURE_BUCKET_ID:  0xEA_IMAGE_dxgkrnl.sys

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {ea458ad2-d5ab-aa6c-7a11-54653c70dfb8}

Followup:     MachineOwner
---------
 
OCCT.

Dosyayı inceledin mi? Ben volarant ile bir laka göremedim.

Ekran kartı sorunu gibi. OC varsa kaldırın. Ayrıca kartınızı OCCT ile test edebilirsiniz.

Kod:
THREAD_STUCK_IN_DEVICE_DRIVER (ea)
The device driver is spinning in an infinite loop, most likely waiting for.
hardware to become idle. This usually indicates problem with the hardware.
itself or with the device driver programming the hardware incorrectly.
If the kernel debugger is connected and running when watchdog detects a.
timeout condition then DbgBreakPoint() will be called instead of KeBugCheckEx()
and detailed message including bugcheck arguments will be printed to the.
debugger. This way we can identify an offending thread, set breakpoints in it,
and hit go to return to the spinning code to debug it further. Because.
KeBugCheckEx() is not called the .bugcheck directive will not return bugcheck.
information in this case. The arguments are already printed out to the kernel.
debugger. You can also retrieve them from a global variable via.
"dd watchdog!g_WdBugCheckData l5" (use dq on NT64).
On MP machines (OS builds <= 3790) it is possible to hit a timeout when the spinning thread is.
interrupted by hardware interrupt and ISR or DPC routine is running at the time.
of the bugcheck (this is because the timeout's work item can be delivered and.
handled on the second CPU and the same time). If this is the case you will have.
to look deeper at the offending thread's stack (e.g. using dds) to determine.
spinning code which caused the timeout to occur.
Arguments:
Arg1: ffff9b0d04157440, Pointer to a stuck thread object. Do .thread then kb on it to find.
the hung location.
Arg2: 0000000000000000, Pointer to a DEFERRED_WATCHDOG object.
Arg3: 0000000000000000, Pointer to offending driver name.
Arg4: 0000000000000000, Number of times this error occurred. If a debugger is attached,
this error is not always fatal -- see DESCRIPTION below. On the.
blue screen, this will always equal 1.

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for atikmdag.sys.

KEY_VALUES_STRING: 1.

Key : Analysis.CPU.Sec.
Value: 1.

Key : Analysis.DebugAnalysisProvider.CPP.
Value: Create: 8007007e on DESKTOP-B5A9UVN.

Key : Analysis.DebugData.
Value: CreateObject.

Key : Analysis.DebugModel.
Value: CreateObject.

Key : Analysis.Elapsed.Sec.
Value: 3.

Key : Analysis.Memory.CommitPeak.Mb.
Value: 74.

Key : Analysis.System.
Value: CreateObject.

ADDITIONAL_XML: 1.

DUMP_FILE_ATTRIBUTES: 0x8.
Kernel Generated Triage Dump.

BUGCHECK_CODE: ea.

BUGCHECK_P1: ffff9b0d04157440.

BUGCHECK_P2: 0.

BUGCHECK_P3: 0.

BUGCHECK_P4: 0.

FAULTING_THREAD: ffff9b0d04157440.

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXPNP: 1 (!blackboxpnp)

CUSTOMER_CRASH_COUNT: 1.

PROCESS_NAME: System.

STACK_TEXT:
fffff487`89b467a8 fffff805`49a9a7f5 : 00000000`000000ea ffff9b0d`04157440 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx.
fffff487`89b467b0 fffff805`49a9a8ca : fffff487`89b46890 fffff805`49a76d9b fffff487`89b46890 fffff805`51571da4 : dxgkrnl!TdrTimedOperationBugcheckOnTimeout+0x45.
fffff487`89b46820 fffff805`514c8880 : 0000000a`3e610a34 fffff805`51571da4 00000000`00000000 ffff9b0d`00b63000 : dxgkrnl!TdrTimedOperationDelay+0xca.
fffff487`89b46860 0000000a`3e610a34 : fffff805`51571da4 00000000`00000000 ffff9b0d`00b63000 00000000`00989680 : atikmdag+0x68880.
fffff487`89b46868 fffff805`51571da4 : 00000000`00000000 ffff9b0d`00b63000 00000000`00989680 00000000`00000001 : 0x0000000a`3e610a34.
fffff487`89b46870 00000000`00000000 : ffff9b0d`00b63000 00000000`00989680 00000000`00000001 00000000`00000028 : atikmdag+0x111da4.

STACK_COMMAND: .thread 0xffff9b0d04157440 ; kb.

SYMBOL_NAME: dxgkrnl!TdrTimedOperationBugcheckOnTimeout+45.

MODULE_NAME: dxgkrnl.

IMAGE_NAME: dxgkrnl.sys.

IMAGE_VERSION: 10.0.17763.1158.

FAILURE_BUCKET_ID: 0xEA_IMAGE_dxgkrnl.sys.

OSPLATFORM_TYPE: x64.

OSNAME: Windows 10.

FAILURE_ID_HASH: {ea458ad2-d5ab-aa6c-7a11-54653c70dfb8}

Followup: MachineOwner.
---------

OCCT indirdim fakat pek bir şey anlamadım yardımcı olur musunuz?
 
Uyarı! Bu konu 6 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Technopat Haberler

Yeni konular

Geri
Yukarı