The Psycho
Hectopat
- Katılım
- 23 Haziran 2013
- Mesajlar
- 531
- Makaleler
- 1
Daha fazla
- Cinsiyet
- Erkek
C/Windows/Minidump klasöründeki dosyalar.
https://www.dropbox.com/s/54n2mp8syc941ly/121113-9296-01.dmp
https://www.dropbox.com/s/1srop7acphycsro/120713-8656-01.dmp
https://www.dropbox.com/s/54n2mp8syc941ly/121113-9296-01.dmp
https://www.dropbox.com/s/1srop7acphycsro/120713-8656-01.dmp
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000009f (0x0000000000000003, 0xffffe00001900460, 0xfffff801b6f3c980,
0xffffe00005835010)
*** ntoskrnl.exe - Address 0xfffff801b4fc8ca0 base at 0xfffff801b4e7b000 DateStamp
0x52520fe4
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: kneps.sys
BAD_POOL_HEADER
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000019 (0x0000000000000020, 0xffffe00000dca110, 0xffffe00000dca160,
0x0000000004050008)
*** kneps.sys - Address 0xfffff8000599716c base at 0xfffff80005992000 DateStamp
0x51b09083
