Windows 8 Mavi Ekran Sorunu - RTL8187B.sys
- Konuyu başlatan okankurubas
- Başlangıç Tarihi
- Mesaj 4
- Görüntüleme 902
Daha fazla
- Meslek
- Judge Dredd
Sorun her zamanki gibi çöp sürücülerden ve güncel sürüm kurmamanızdan kaynaklanıyor. Ağ kartı sürücünüzü güncelleyin. Güvenlik yazılımı kurduysanız onu da güncelleyin. Güncellik!
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: hal.dll
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000009f (0x0000000000000003, 0xfffffa800573a060, 0xfffff800753d88f0,
0xfffffa8006db1850)
*** hal.dll - Address 0xfffff80075d74f19 base at 0xfffff80075d58000 DateStamp
0x50875a79
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: RTL8187B.sys
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000009f (0x0000000000000003, 0xfffffa80050a8060, 0xfffff80241ed88f0,
0xfffffa80053104a0)
*** RTL8187B.sys - Address 0xfffff880069186c6 base at 0xfffff8800690c000 DateStamp
0x4fc736e9
KS
KS
okankurubas
Megapat
Çok teşekkürler Burak Bey, saygılar.
Denedim yüklemeyi fakat işletim sistemini desteklemiyor :/
Denedim yüklemeyi fakat işletim sistemini desteklemiyor :/
Son düzenleyen: Moderatör:
KS
KS
okankurubas
Megapat
Teşekkürler Murat Bey şuanlık bir sorun yok, sorun tekrarlarsa bu konudan çözüm yolu ararız.
Benzer konular
