XML kodu düzenleyebilecek var mı?

<Text>burası düzenlenecek</Text>
<TranslationContainer>
<Translations>
<Translation>
<Keyword>missingResoureDllID</Keyword>
<Text>Install Problem: missing resource DLL</Text>
</Translation>
<Translation>
<Keyword>ProblemWithNumericInputId</Keyword>
<Text>Problem with number</Text>
</Translation>
<Translation>
<Keyword>skipNextWizardStepsId</Keyword>
<Text>Do you wish to skip these steps?</Text>
</Translation>
<Translation>
<Keyword>skipNextWizardStepId</Keyword>
<Text>Do you wish to skip this step?</Text>
</Translation>
<Translation>
<Keyword>requiresClosedCurveId</Keyword>
<Text>%s requires a closed curve loop</Text>
</Translation>
<Translation>
<Keyword>requiresOpenCurveId</Keyword>
<Text>%s requires an open curve</Text>
</Translation>
<Translation>
<Keyword>PartialsWorkflowModifierTagId</Keyword>
<Text>PartialsWorkflowModifier tag not found in %s</Text>
</Translation>
<Translation>
<Keyword>WorkflowBeforeAfterErrorId</Keyword>
<Text>Don't use both "Before" and "After"
in RemoveWorkflowStep in %s</Text>
</Translation>
<Translation>
<Keyword>WorkflowBeforeAfterErrorInAddId</Keyword>
<Text>Don't use both "Before" and "After"
in AddWorkflowStep in %s</Text>
</Translation>
<Translation>
<Keyword>WorkflowMustSpecifyBeforeOrAfterInAddId</Keyword>
<Text>Must specify either "Before" or "After"
in AddWorkflowStep in %s</Text>
</Translation>
<Translation>
<Keyword>MissingRemoveWorkflowStepErrorId</Keyword>
<Text>RemoveWorkflowStep %s in %s was not found in wizard steps</Text>
</Translation>
<Translation>
<Keyword>AddWorkflowStepNotFound</Keyword>
<Text>AddWorkflowStep %s in %s was not found in wizard steps</Text>
</Translation>
<Translation>
<Keyword>UnableToGenerateKeyboardMappingsId</Keyword>
<Text>Unable to generate the CurrentKeyMappings html file</Text>
</Translation>
<Translation>
<Keyword>BuildPieceCouldNotBeCreatedId</Keyword>
<Text>The build piece could not be created.</Text>
</Translation>
<Translation>
<Keyword>DentallabExitFileDirtyId</Keyword>
<Text>The model for the current job has not been saved.
Do you wish to save it before exiting?</Text>
</Translation>
<Translation>
<Keyword>VirtualModelErrorId</Keyword>
<Text>The virtual model could not be created.</Text>
</Translation>
<Translation>
<Keyword>RemoveAllScanFilesId</Keyword>
<Text>Remove all scan files from this project?
(scan files from folder \"%s\" directory will also be removed)</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteDiskFullId</Keyword>
<Text>Unable to save file. Check to make sure that the directory exists,
is accessible and has space available.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadIncompleteId</Keyword>
<Text>Error reading file - file is incomplete.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadcorruptId</Keyword>
<Text>The selected file cannot be read. It may not be a valid file, it may be a corrupted file, or it may have been created in a newer version.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteId</Keyword>
<Text>Error writing file</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadBadExtensionId</Keyword>
<Text>Error reading file - bad file extension.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteBadExtensionId</Keyword>
<Text>Error writing file - bad extension.</Text>
</Translation>
<Translation>
<Keyword>LoadUndoOpErrorId</Keyword>
<Text>Unable to read history from disk. Cannot undo/redo last operation.</Text>
</Translation>
<Translation>
<Keyword>SaveUndoOpErrorId</Keyword>
<Text>Unable to save history to disk - you will not be able to undo the last operation.
Verify that you have space on your drive and that the temporary directory is present.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadId</Keyword>
<Text>Error reading file</Text>
</Translation>
<Translation>
<Keyword>ErrorFileSaveId</Keyword>
<Text>File not saved.
Unable to save a temporary copy of the file.
The temporary directory may be full or it may not have write permissions.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteTempFullId</Keyword>
<Text>Unable to save a temporary copy of the file. The temporary directory may be full or it may not exist.</Text>
</Translation>
<Translation>
<Keyword>AskToSaveId</Keyword>
<Text>The file '%s' has been modified.
Would you like to save it?</Text>
</Translation>
<Translation>
<Keyword>UnableToCreateFolderFreeformPalettesId</Keyword>
<Text>Unable to create folder for palettes in temp directory.</Text>
</Translation>
<Translation>
<Keyword>CustomToolSameNameAsStandardLoopId</Keyword>
<Text>The tool name "StandardLoop1" is already in use by one of the standard tools. Please choose another name.</Text>
</Translation>
<Translation>
<Keyword>CustomToolSameNameAsStandardAngleId</Keyword>
<Text>The tool name "StandardAngle1" is already in use by one of the standard tools. Please choose another name.</Text>
</Translation>
<Translation>
<Keyword>TooManySavedViewsId</Keyword>
<Text>You have 50 views saved. You must delete a saved view to save a new view.</Text>
</Translation>
<Translation>
<Keyword>UnexpectedErrorLoadingFileId</Keyword>
<Text>Unexpected error loading file:
"%s"</Text>
</Translation>
<Translation>
<Keyword>ResourcesFailedToLoadId</Keyword>
<Text>The main application resource file could not be found. You may need to reinstall the software.</Text>
</Translation>
<Translation>
<Keyword>RequireFullColorId</Keyword>
<Text>Full color (32 bit) mode is strongly recommended. Please adjust your display properties and restart the application.</Text>
</Translation>
<Translation>
<Keyword>InvalidParamInstallationProblemDbToPartialId</Keyword>
<Text>Installation problem
Invalid parameter matching in \"config\\dbtopartialappmap.xml\".
The parameter name \"%s\" is unknown.</Text>
</Translation>
<Translation>
<Keyword>MissingParamInstallationProblemDbToPartialId</Keyword>
<Text>Installation problem
Missing parameter linkage in \"config\\dbtopartialappmap.xml".
The parameter name \"%s\" has no partial equivalent defined.</Text>
</Translation>
<Translation>
<Keyword>PartialAndAntagonistOnSameJawId</Keyword>
<Text>Antagonist and partial denture should not both be %s.</Text>
</Translation>
<Translation>
<Keyword>InconsistentDbSettingsId</Keyword>
<Text>Job settings are inconsistent between tooth %s and %s.
Partial framework reconstructions should use the same material and parameters.
Do you wish to return to the DB to fix this?</Text>
</Translation>
<Translation>
<Keyword>MissingImportedPartFileId</Keyword>
<Text>Imported part file "%s"
specified but not found. Skipping...</Text>
</Translation>
<Translation>
<Keyword>WhatIsTypeOfThisScanFileId</Keyword>
<Text>The scan file found in the folder:
\"%s\".
Appears to be the wrong type for the project.
Do you want to manually select a scan or cancel loading this scene?</Text>
</Translation>
<Translation>
<Keyword>DoYouWantToRevertId</Keyword>
<Text>Do you want to revert to the saved '%s'?</Text>
</Translation>
<Translation>
<Keyword>ErrorNoValidGeometryId</Keyword>
<Text>Error loading file.
Either there is no valid geometry in the file for the options selected, or the file is corrupt.</Text>
</Translation>
<Translation>
<Keyword>CloneBlockoutWarningId</Keyword>
<Text>To avoid clearing the current 'Limit to depth' setting,
do you wish to automatically switch to 'Layer on refractory only' mode?</Text>
</Translation>
<Translation>
<Keyword>EmbossPreviewFailedId</Keyword>
<Text>Preview for emboss failed.
You may not have enough memory to perform the preview.</Text>
</Translation>
<Translation>
<Keyword>FixdraftErrFailureId</Keyword>
<Text>The FixDraft operation failed.</Text>
</Translation>
<Translation>
<Keyword>FixDraftErrBadInputsId</Keyword>
<Text>The FixDraft operation failed because one or more of the input parameters were invalid.
Please verify the inputs and repeat the operation.</Text>
</Translation>
<Translation>
<Keyword>FixdraftErrGrowWorkspaceFailedId</Keyword>
<Text>The FixDraft operation failed because the requested draft angle may cause the model to grow to a size that would exceed available memory.
Please reduce the draft angle or modify the draft mode.</Text>
</Translation>
<Translation>
<Keyword>FixdraftErrTempVolAllocFailedId</Keyword>
<Text>Insufficient memory available to perform the FixDraft operation.</Text>
</Translation>
<Translation>
<Keyword>UnableToLoadImageFileId</Keyword>
<Text>Unable to load image file</Text>
</Translation>
<Translation>
<Keyword>NurbsCurveCreateErrorId</Keyword>
<Text>The curve was not placed. The points may be too far apart for the curve to fit properly.</Text>
</Translation>
<Translation>
<Keyword>NonCurveLoopSelectedId</Keyword>
<Text>The selected curves don't form a closed loop.</Text>
</Translation>
<Translation>
<Keyword>YellowZoneWorkspaceId</Keyword>
<Text>This operation may require more memory than your computer has.
If you proceed, save your work often since exceeding memory may lead to unpredictable problems.</Text>
</Translation>
<Translation>
<Keyword>RedZoneWorkspaceId</Keyword>
<Text>This workspace requires too much memory.</Text>
</Translation>
<Translation>
<Keyword>UnableToCreatNewDocId</Keyword>
<Text>Unable to create a new document.</Text>
</Translation>
<Translation>
<Keyword>ZeroOrLessWorkspaceId</Keyword>
<Text>Negative values or zero are not a valid choice for width, height, depth, diameter, or edge sharpness.</Text>
</Translation>
<Translation>
<Keyword>ResampleReallyDownsampleId</Keyword>
<Text>Changing to this coarser wax setting will cause a loss of detail.
Are you sure you want to proceed?</Text>
</Translation>
<Translation>
<Keyword>ResizeWorkspaceEmptyWsMinimizeId</Keyword>
<Text>An empty work area cannot be minimized.</Text>
</Translation>
<Translation>
<Keyword>EdgeSharpnessId</Keyword>
<Text>Wax resolution is too high.</Text>
</Translation>
<Translation>
<Keyword>OpenFileMemoryWarningId</Keyword>
<Text>This model requires more memory than your computer has. If you proceed, save your work often since exceeding memory will lead to unpredictable problems.
Would you like to proceed?</Text>
</Translation>
<Translation>
<Keyword>MultipleFileFormatOnlyStlId</Keyword>
<Text>Multiple file import is only supported for STL files.</Text>
</Translation>
<Translation>
<Keyword>UnknownFileTypeId</Keyword>
<Text>Unknown file type</Text>
</Translation>
<Translation>
<Keyword>ProfileNotFoundId</Keyword>
<Text>The profile: "%s"
could not be found.
</Text>
</Translation>
<Translation>
<Keyword>BadProfileId</Keyword>
<Text>This profile is invalid.
The outline must be a closed curve.</Text>
</Translation>
<Translation>
<Keyword>BadProfileXId</Keyword>
<Text>This profile is invalid.
The outline is missing the horizontal line at the bottom.</Text>
</Translation>
<Translation>
<Keyword>BadProfileFillId</Keyword>
<Text>The profile could not be applied with the current settings.</Text>
</Translation>
<Translation>
<Keyword>BadProfileEndcapsId</Keyword>
<Text>The profile endcaps could not be applied with the current settings.</Text>
</Translation>
<Translation>
<Keyword>UnfitCurveId</Keyword>
<Text>The selected curve could not be used.
Curves must be fit to the surface.</Text>
</Translation>
<Translation>
<Keyword>ShapeErrorFailedToCreatePatchId</Keyword>
<Text>The wax may be too bumpy to shape or the boundary curves may be too irregular to enclose an area of wax.
Use the option to fit sections to boundaries only or edit the boundary curves.</Text>
</Translation>
<Translation>
<Keyword>FillerApplyFailedId</Keyword>
<Text>Failed to commit the filler surface to the wax.</Text>
</Translation>
<Translation>
<Keyword>GpuSetupErrorId</Keyword>
<Text>There was a problem with the graphics hardware acceleration initialization.</Text>
</Translation>
<Translation>
<Keyword>GpuBoundsErrorId</Keyword>
<Text>There was a problem with the bounds setup for the graphics hardware acceleration initialization.</Text>
</Translation>
<Translation>
<Keyword>GpuNotEnabledId</Keyword>
<Text>Hardware acceleration must be enabled to use this feature.</Text>
</Translation>
<Translation>
<Keyword>GpuMemErrorId</Keyword>
<Text>The use of hardware acceleration with this model exceeds the memory limits of the graphics card.</Text>
</Translation>
<Translation>
<Keyword>BadMeshId</Keyword>
<Text>The chosen pattern could not be used.</Text>
</Translation>
<Translation>
<Keyword>OutlineCurvesNotJoinedAtEndpointsId</Keyword>
<Text>The connector outline curves are not joined at the end points.</Text>
</Translation>
<Translation>
<Keyword>NoMajorConnectorCurveFoundId</Keyword>
<Text>No major connector curve found.</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorSelectCurvesId</Keyword>
<Text>First, select the outer curve loop defining the wax area, then, if desired, an inner curve loop to create a hole.</Text>
</Translation>
<Translation>
<Keyword>ConnectorAreaNotEmbossedId</Keyword>
<Text>The connector area could not be embossed.</Text>
</Translation>
<Translation>
<Keyword>ConnectorHoleCurvesNotJoinedId</Keyword>
<Text>The connector hole curves are not joined at the end points.</Text>
</Translation>
<Translation>
<Keyword>ConnectorHoleNotCreatedId</Keyword>
<Text>The connector hole could not be created.</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewFailedId</Keyword>
<Text>The preview could not be created for the selected mesh areas.</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewErrorId</Keyword>
<Text>The preview could not be created for all the selected mesh areas.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserApplyFailedId</Keyword>
<Text>The wax could not be created.</Text>
</Translation>
<Translation>
<Keyword>FalloffApplyFailedId</Keyword>
<Text>The connector edge falloff could not be applied due to overlapping curve regions.
This can be avoided by applying each overlapping region sequentially rather than simultaneously.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserErrorSnipFailedId</Keyword>
<Text>The mesh preview could not be generated.</Text>
</Translation>
<Translation>
<Keyword>DirtyProfileWarningLockedId</Keyword>
<Text>The current profile has been modified.
This is a locked standard profile.
If you wish to save the changes, press 'Save as'.
Do you wish to discard the changes?</Text>
</Translation>
<Translation>
<Keyword>DirtyProfileWarningId</Keyword>
<Text>The current profile has been modified, but not saved.
Do you wish to return to the 'Edit profile' screen to save your changes?</Text>
</Translation>
<Translation>
<Keyword>DeleteProfileWarningId</Keyword>
<Text>Are you sure you want to delete this custom profile?</Text>
</Translation>
<Translation>
<Keyword>DeleteProfileErrorId</Keyword>
<Text>Error deleting profile</Text>
</Translation>
<Translation>
<Keyword>BarFailedGenericId</Keyword>
<Text>The current profile orientation choice doesn't work with the selected curve.</Text>
</Translation>
<Translation>
<Keyword>BadProfileCenterId</Keyword>
<Text>This profile is invalid.
The outline does not contain the plane center.</Text>
</Translation>
<Translation>
<Keyword>SelectSketchPlaneId</Keyword>
<Text>Please use a closed loop profile.</Text>
</Translation>
<Translation>
<Keyword>SurveyColorUndercutErrorId</Keyword>
<Text>Failed to generate the undercut coloring.</Text>
</Translation>
<Translation>
<Keyword>SurveyApplyWarningId</Keyword>
<Text>Do you wish to apply the 'Survey tool' now?</Text>
</Translation>
<Translation>
<Keyword>SurveyNoMeshFoundId</Keyword>
<Text>Can't find an input mesh for survey.</Text>
</Translation>
<Translation>
<Keyword>SurveyBlockoutErrorId</Keyword>
<Text>Failed to generate refractory model and blockout wax.</Text>
</Translation>
<Translation>
<Keyword>SurveyFinishErrorId</Keyword>
<Text>Failed to complete surveying of the blocked out model.</Text>
</Translation>
<Translation>
<Keyword>ConstrainedTugNotOnSurfaceId</Keyword>
<Text>The selected curves do not lie near the surface of the wax.
Please fit the curves to the wax.</Text>
</Translation>
<Translation>
<Keyword>ConstrainedTugPendingId</Keyword>
<Text>Clear or apply the existing tug.</Text>
</Translation>
<Translation>
<Keyword>ConstrainedTugSplitFailedId</Keyword>
<Text>The selected curve loop may be too small for this operation. Try clicking farther from the edge of the curve.
If this does not work, make the curve loop bigger or increase the wax coarseness of the piece.</Text>
</Translation>
<Translation>
<Keyword>FloatingPointOnFitCurveWarningId</Keyword>
<Text>Floating a curve point on a 'fit to surface' curve.
This will produce an unexpected result.</Text>
</Translation>
<Translation>
<Keyword>ApplyPostToolId</Keyword>
<Text>Do you wish to apply the 'Post tool' now?</Text>
</Translation>
<Translation>
<Keyword>CantFindRegisteredToolId</Keyword>
<Text>Can't find registered tool %s.</Text>
</Translation>
<Translation>
<Keyword>CouldNotFillToPlaneId</Keyword>
<Text>Could not fill to plane.</Text>
</Translation>
<Translation>
<Keyword>NoBitmapToSaveId</Keyword>
<Text>No bitmap image attached.
File save cancelled.</Text>
</Translation>
<Translation>
<Keyword>CantSaveBitmapWithZeroDimensionId</Keyword>
<Text>Bitmap has zero width and/or zero height.
File save cancelled.</Text>
</Translation>
<Translation>
<Keyword>UnsupportedBitmapSaveOperationId</Keyword>
<Text>Unsupported operation saving this bitmap.
Save has been canceled</Text>
</Translation>
<Translation>
<Keyword>CantOpenBitmapForWriteId</Keyword>
<Text>Error opening bitmap file for write.
File save cancelled.</Text>
</Translation>
<Translation>
<Keyword>ApplyClaspNowId</Keyword>
<Text>Do you wish to apply the 'Clasp tool' now?</Text>
</Translation>
<Translation>
<Keyword>ApplyFinishlineNowId</Keyword>
<Text>Do you wish to apply the 'Finish line tool' now?</Text>
</Translation>
<Translation>
<Keyword>ModelTooLargeForGPUId</Keyword>
<Text>This model is too large to be processed in GPU.
Currently there is %dMb of GPU memory in use.
You can improve this by closing or reducing the window size of any other 3D applications.</Text>
</Translation>
<Translation>
<Keyword>IgnoringUnfitCurvesId</Keyword>
<Text>There are curve loops present that do not fit to the surface.
These will be ignored by this tool.</Text>
</Translation>
<Translation>
<Keyword>ApplyMajorConnectorNowId</Keyword>
<Text>Do you wish to apply the 'Major connector tool' now?</Text>
</Translation>
<Translation>
<Keyword>NeedToPreviewAndAPplyMeshConnectorId</Keyword>
<Text>You still need to preview and apply the 'Mesh connector tool'.
Would you like to do that now?</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshConnectorNowId</Keyword>
<Text>Do you wish to apply the 'Mesh connector tool' now?</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshRiserToolNowId</Keyword>
<Text>Do you wish to apply the 'Mesh riser tool' now?</Text>
</Translation>
<Translation>
<Keyword>GpuVolumeNotFoundId</Keyword>
<Text>GPU volume not found</Text>
</Translation>
<Translation>
<Keyword>ApplyBarToolId</Keyword>
<Text>Do you wish to apply the 'Bar tool' now?</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildNowId</Keyword>
<Text>Do you wish to save for build now?</Text>
</Translation>
<Translation>
<Keyword>ApplyPipeNowId</Keyword>
<Text>Do you wish to apply the 'Pipe tool' now?</Text>
</Translation>
<Translation>
<Keyword>FinishInProgressCurveId</Keyword>
<Text>Please finish the current curve first.</Text>
</Translation>
<Translation>
<Keyword>CantUndoId</Keyword>
<Text>Can't undo.</Text>
</Translation>
<Translation>
<Keyword>SaveDisabledDuringBlockoutId</Keyword>
<Text>Due to special scene state:
Saving disabled in 'Edit blockout'.
Please leave this tool before saving.
</Text>
</Translation>
<Translation>
<Keyword>CouldNotFindRefractoryId</Keyword>
<Text>Error: Could not find refactory.</Text>
</Translation>
<Translation>
<Keyword>FileHasChangedSaveItFirstId</Keyword>
<Text>The current file has changed.
Do you want to save it first?</Text>
</Translation>
<Translation>
<Keyword>MeshCurvesNotDeletingScaneDisabledId</Keyword>
<Text>This project has partial mesh curves: Deleting of scan meshes disabled.</Text>
</Translation>
<Translation>
<Keyword>MajorConnectoraNotDeletingScaneDisabledId</Keyword>
<Text>This project has major connector curves: Deleting of scan meshes disabled.</Text>
</Translation>
<Translation>
<Keyword>WaxDataNotDeletingScaneDisabledId</Keyword>
<Text>This project has wax data: Deleting of scan meshes disabled.</Text>
</Translation>
<Translation>
<Keyword>NoScanMeshId</Keyword>
<Text>Did not find any scan meshes in the scene.</Text>
</Translation>
<Translation>
<Keyword>ProblemExportingId</Keyword>
<Text>There was a problem with exporting.</Text>
</Translation>
<Translation>
<Keyword>NoSceneFoudErrorId</Keyword>
<Text>No scene found.</Text>
</Translation>
<Translation>
<Keyword>DuplicateContextNameErrorId</Keyword>
<Text>Duplicate context installation error:
%s</Text>
</Translation>
<Translation>
<Keyword>WorkOnUpperOrLowerId</Keyword>
<Text>This case has a partial in the lower and the upper jaw.
Which one you want to work on?</Text>
</Translation>
<Translation>
<Keyword>AntagonistErrorId</Keyword>
<Text>Error: Antagonist teeth found on both jaws.</Text>
</Translation>
<Translation>
<Keyword>UnregisteredScanWarningId</Keyword>
<Text>Warning!
The scan file needs to be registered.
Please load the project in the main exocad app to register.</Text>
</Translation>
<Translation>
<Keyword>FailedToCopyAntagonistFileId</Keyword>
<Text>Failed to copy antagonist file.</Text>
</Translation>
<Translation>
<Keyword>FailedToCopyTextureFileId</Keyword>
<Text>Failed to copy texture file.</Text>
</Translation>
<Translation>
<Keyword>FoundUnregisteredAntagonistId</Keyword>
<Text>Warning!
The antagonist needs to be registered.
Please load the project in the main exocad app to register.</Text>
</Translation>
<Translation>
<Keyword>ConvertWaterTightToMillingWarningId</Keyword>
<Text>Converting parts to 3D printing that were optimized for milling may reduce accuracy.
Are you sure you want to do this?</Text>
</Translation>
<Translation>
<Keyword>ConvertWaterTightToMillingChangeProjectWarningId</Keyword>
<Text>Note: With these imported parts/settings, the output file may not be suitable for 3D printing.
Change production mode to milling?
</Text>
</Translation>
<Translation>
<Keyword>ApplyImportedPartsNowId</Keyword>
<Text>Do you wish to apply the parts now?</Text>
</Translation>
<Translation>
<Keyword>NeedSurveyBeforeImportedPartsId</Keyword>
<Text>Please complete the survey step before adding imported parts.</Text>
</Translation>
<Translation>
<Keyword>ChangeProjectToOptimizedForMillingId</Keyword>
<Text> Note: This imported part was optimized for milling, yet this project is optimized for watertightness.
Would you like to change the project optimization to milling?</Text>
</Translation>
<Translation>
<Keyword>TheInnerObjectAlreadyExistsId</Keyword>
<Text>The inner object "%s" already exists.
If you want to convert it to refractory,
make sure it is active and press "Convert to wax".</Text>
</Translation>
<Translation>
<Keyword>NoInnerTrianglesFoundId</Keyword>
<Text>No inner triangles found.
No inner object could be created.
This option only works on exocad generated files.</Text>
</Translation>
<Translation>
<Keyword>CurveEditErrorId</Keyword>
<Text>The curve(s) could not be fitted to the object.
Either the object was deleted, made invisible,
or its surface was too far away.
</Text>
</Translation>
<Translation>
<Keyword>CurveFitFailureId</Keyword>
<Text>Curve fitting failed, please try again using more control points to place the curve closer to the surface.</Text>
</Translation>
<Translation>
<Keyword>CurveReplaceModeUsageId</Keyword>
<Text>When replacing a curve segment, start and end the segment with a single click on an existing curve.</Text>
</Translation>
<Translation>
<Keyword>OKId</Keyword>
<Text>OK</Text>
</Translation>
<Translation>
<Keyword>CancelId</Keyword>
<Text>Cancel</Text>
</Translation>
<Translation>
<Keyword>YesId</Keyword>
<Text>Yes</Text>
</Translation>
<Translation>
<Keyword>NoId</Keyword>
<Text>No</Text>
</Translation>
<Translation>
<Keyword>RetryId</Keyword>
<Text>Retry</Text>
</Translation>
<Translation>
<Keyword>AbortId</Keyword>
<Text>Abort</Text>
</Translation>
<Translation>
<Keyword>UpperId</Keyword>
<Text>Upper</Text>
</Translation>
<Translation>
<Keyword>LowerId</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>SurveyTooltipId</Keyword>
<Text>Survey</Text>
</Translation>
<Translation>
<Keyword>SurveyDescriptionId</Keyword>
<Text>Generate refractory model from scanned mesh and block out undercuts.</Text>
</Translation>
<Translation>
<Keyword>SmoothFeatureTooltipId</Keyword>
<Text>Edit wax</Text>
</Translation>
<Translation>
<Keyword>SmoothFeatureDescriptionId</Keyword>
<Text>Smooth and smudge wax</Text>
</Translation>
<Translation>
<Keyword>MeshConnectorTooltipId</Keyword>
<Text>Mesh connector</Text>
</Translation>
<Translation>
<Keyword>MeshConnectorDescriptionId</Keyword>
<Text>Apply mesh and major connector</Text>
</Translation>
<Translation>
<Keyword>SmoothAreaTooltipId</Keyword>
<Text>Smooth area</Text>
</Translation>
<Translation>
<Keyword>SmoothAreaDescriptionId</Keyword>
<Text>Smooth an area or the entire model</Text>
</Translation>
<Translation>
<Keyword>SmudgeBlockoutTooltipId</Keyword>
<Text>Edit blockout</Text>
</Translation>
<Translation>
<Keyword>SmudgeBlockoutDescriptionId</Keyword>
<Text>Push or pull (shift) wax with a ball tool</Text>
</Translation>
<Translation>
<Keyword>TugTooltipId</Keyword>
<Text>Tug</Text>
</Translation>
<Translation>
<Keyword>TugDescriptionId</Keyword>
<Text>Modify wax by tugging an area</Text>
</Translation>
<Translation>
<Keyword>PipeTooltipId</Keyword>
<Text>Pipe</Text>
</Translation>
<Translation>
<Keyword>PipeDescriptionId</Keyword>
<Text>Create a pipe along one or more curves</Text>
</Translation>
<Translation>
<Keyword>EmbossWithCurveTooltipId</Keyword>
<Text>Emboss with curve</Text>
</Translation>
<Translation>
<Keyword>EmbossWithCurveDescriptionId</Keyword>
<Text>Raise or lower wax enclosed by a curve</Text>
</Translation>
<Translation>
<Keyword>RetentionBeadTooltipId</Keyword>
<Text>Retention beads</Text>
</Translation>
<Translation>
<Keyword>RetentionBeadDescriptionId</Keyword>
<Text>Add retention beads on a surface area bounded by a curve</Text>
</Translation>
<Translation>
<Keyword>AddPostTooltipId</Keyword>
<Text>Add post</Text>
</Translation>
<Translation>
<Keyword>AddPostDescriptionId</Keyword>
<Text>Add post to the model</Text>
</Translation>
<Translation>
<Keyword>FixDraftSelectionTooltipId</Keyword>
<Text>Secondary blockout</Text>
</Translation>
<Translation>
<Keyword>FixDraftSelectionDescriptionId</Keyword>
<Text>Add wax in the selected area with a specified blockout angle</Text>
</Translation>
<Translation>
<Keyword>BarTooltipId</Keyword>
<Text>Bar</Text>
</Translation>
<Translation>
<Keyword>BarDescriptionId</Keyword>
<Text>Add wax by sweeping a profile along a curve</Text>
</Translation>
<Translation>
<Keyword>FillerTooltipId</Keyword>
<Text>Filler</Text>
</Translation>
<Translation>
<Keyword>FillerDescriptionId</Keyword>
<Text>Fills area inside a curve loop with wax</Text>
</Translation>
<Translation>
<Keyword>PaintFillerTooltipId</Keyword>
<Text>Paint filler</Text>
</Translation>
<Translation>
<Keyword>PaintFillerDescriptionId</Keyword>
<Text>Fills a paint-selected area with wax</Text>
</Translation>
<Translation>
<Keyword>EmbossAreaTooltipId</Keyword>
<Text>Emboss with image or text</Text>
</Translation>
<Translation>
<Keyword>EmbossAreaDescriptionId</Keyword>
<Text>Raise or lower wax with a projected image</Text>
</Translation>
<Translation>
<Keyword>CloneTooltipId</Keyword>
<Text>Clone</Text>
</Translation>
<Translation>
<Keyword>CloneDescriptionId</Keyword>
<Text>Add wax with constant thickness by tracing mouse on the surface</Text>
</Translation>
<Translation>
<Keyword>ClaspTooltipId</Keyword>
<Text>Clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspDescriptionId</Keyword>
<Text>Apply clasp</Text>
</Translation>
<Translation>
<Keyword>MeshRiserTooltipId</Keyword>
<Text>Mesh</Text>
</Translation>
<Translation>
<Keyword>MeshRiserDescriptionId</Keyword>
<Text>Wrap a mesh pattern with a spacer underneath</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorTooltipId</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorDescriptionId</Keyword>
<Text>Create a connector based on a curve boundary loop</Text>
</Translation>
<Translation>
<Keyword>WaxPonticsTooltipId</Keyword>
<Text>Add parts</Text>
</Translation>
<Translation>
<Keyword>WaxPonticsDescriptionId</Keyword>
<Text>Add parts to the partial</Text>
</Translation>
<Translation>
<Keyword>FinishLineTooltipId</Keyword>
<Text>Finish line</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildTooltipId</Keyword>
<Text>Prepare for build</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildDescriptionId</Keyword>
<Text>Convert wax to STL for build</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorTooltipId</Keyword>
<Text>Minor connector</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorDescriptionId</Keyword>
<Text>Connect clasps to major connector</Text>
</Translation>
<Translation>
<Keyword>DrawExoCurveTooltipId</Keyword>
<Text>Curve</Text>
</Translation>
<Translation>
<Keyword>DrawExoCurveDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>SelectClayWithBallTooltipId</Keyword>
<Text>Select wax</Text>
</Translation>
<Translation>
<Keyword>SelectClayWithBallDescriptionId</Keyword>
<Text>Select wax with ball</Text>
</Translation>
<Translation>
<Keyword>MaskTooltipId</Keyword>
<Text>Mask</Text>
</Translation>
<Translation>
<Keyword>MaskDescriptionId</Keyword>
<Text>Mask wax with falloff</Text>
</Translation>
<Translation>
<Keyword>MeasureWaxTooltipId</Keyword>
<Text>Measure wax</Text>
</Translation>
<Translation>
<Keyword>MeasureWaxDescriptionId</Keyword>
<Text>Measure distance and thickness of wax</Text>
</Translation>
<Translation>
<Keyword>TrimScanTooltipId</Keyword>
<Text>Trim scan</Text>
</Translation>
<Translation>
<Keyword>TrimScanDescriptionId</Keyword>
<Text>Trim scan</Text>
</Translation>
<Translation>
<Keyword>ExpertPaletteCaptionId</Keyword>
<Text>Expert</Text>
</Translation>
<Translation>
<Keyword>UtilityPaletteCaptionId</Keyword>
<Text>Utilities</Text>
</Translation>
<Translation>
<Keyword>BasicPaletteCaptionId</Keyword>
<Text>Basic</Text>
</Translation>
<Translation>
<Keyword>DrawBarandMeshNameId</Keyword>
<Text>Draw bar and mesh</Text>
</Translation>
<Translation>
<Keyword>DrawBarandMeshDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshNameId</Keyword>
<Text>Apply mesh</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshDescriptionId</Keyword>
<Text>Draw outline for mesh, adjust settings, and apply</Text>
</Translation>
<Translation>
<Keyword>ApplyBarNameId</Keyword>
<Text>Apply bar</Text>
</Translation>
<Translation>
<Keyword>ApplyBarDescriptionId</Keyword>
<Text>Select curve, adjust settings, then apply</Text>
</Translation>
<Translation>
<Keyword>ApplyApronNameId</Keyword>
<Text>Apply apron</Text>
</Translation>
<Translation>
<Keyword>ApplyApronDescriptionId</Keyword>
<Text>Select curve, adjust settings, then apply</Text>
</Translation>
<Translation>
<Keyword>DrawApronNameId</Keyword>
<Text>Draw apron</Text>
</Translation>
<Translation>
<Keyword>DrawApronDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorNameId</Keyword>
<Text>Draw connector</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyFlexiConnectorNameId</Keyword>
<Text>Apply flexi connector</Text>
</Translation>
<Translation>
<Keyword>ApplyFlexiConnectorDescriptionId</Keyword>
<Text>Select curve, adjust settings, then apply</Text>
</Translation>
<Translation>
<Keyword>DrawIndentationAreaNameId</Keyword>
<Text>Draw indentation areas for teeth</Text>
</Translation>
<Translation>
<Keyword>DrawIndentationAreaDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyIndentationNameId</Keyword>
<Text>Apply indentation</Text>
</Translation>
<Translation>
<Keyword>ApplyIndentationDescriptionId</Keyword>
<Text>Make indentation for teeth</Text>
</Translation>
<Translation>
<Keyword>DrawSupportBarsNameId</Keyword>
<Text>Draw support bars</Text>
</Translation>
<Translation>
<Keyword>DrawSupportBarsDescriptionId</Keyword>
<Text>Draw support bar across arch with unfit curves</Text>
</Translation>
<Translation>
<Keyword>ApplySupportBarsNameId</Keyword>
<Text>Apply support bars</Text>
</Translation>
<Translation>
<Keyword>ApplySupportBarsDescriptionId</Keyword>
<Text>Select curves and apply support bars</Text>
</Translation>
<Translation>
<Keyword>AddPartNameId</Keyword>
<Text>Add part</Text>
</Translation>
<Translation>
<Keyword>AddPartDescriptionId</Keyword>
<Text>Add parts to model</Text>
</Translation>
<Translation>
<Keyword>SurveyModelNameId</Keyword>
<Text>Survey model</Text>
</Translation>
<Translation>
<Keyword>SurveyModelDescriptionId</Keyword>
<Text>Set insertion path, then apply to blockout model</Text>
</Translation>
<Translation>
<Keyword>EditBlockoutNameId</Keyword>
<Text>Edit blockout</Text>
</Translation>
<Translation>
<Keyword>EditBlockoutDescriptionId</Keyword>
<Text>Expose undercuts in blockout, then add extra relief wax</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorandMeshNameId</Keyword>
<Text>Draw connector and mesh</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorandMeshDescriptionId</Keyword>
<Text>Draw major connector and mesh curves by clicking points on model</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshConnectorNameId</Keyword>
<Text>Apply mesh connector</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshConnectorDescriptionId</Keyword>
<Text>Preview mesh, then adjust and apply</Text>
</Translation>
<Translation>
<Keyword>DrawClaspsNameId</Keyword>
<Text>Draw clasps</Text>
</Translation>
<Translation>
<Keyword>DrawClaspsDescriptionId</Keyword>
<Text>Draw clasp curves by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyClaspNameId</Keyword>
<Text>Apply clasp</Text>
</Translation>
<Translation>
<Keyword>ApplyClaspDescriptionId</Keyword>
<Text>Apply clasps: Select curve, adjust, and apply</Text>
</Translation>
<Translation>
<Keyword>FillInWaxNameId</Keyword>
<Text>Fill in wax (clone)</Text>
</Translation>
<Translation>
<Keyword>FillInWaxDescriptionId</Keyword>
<Text>Fill in and create rest seats, around mesh, distal minor connector</Text>
</Translation>
<Translation>
<Keyword>DrawFinishLineNameId</Keyword>
<Text>Draw finish line</Text>
</Translation>
<Translation>
<Keyword>DrawFinishLineDescriptionId</Keyword>
<Text>Create curve by clicking on the wax</Text>
</Translation>
<Translation>
<Keyword>FinishLineNameId</Keyword>
<Text>Finish line</Text>
</Translation>
<Translation>
<Keyword>FinishLineDescriptionId</Keyword>
<Text>Create finish line: Select curve, adjust, and apply</Text>
</Translation>
<Translation>
<Keyword>EditWaxNameId</Keyword>
<Text>Edit wax</Text>
</Translation>
<Translation>
<Keyword>EditWaxDescriptionId</Keyword>
<Text>Clean up the wax</Text>
</Translation>
<Translation>
<Keyword>BuildNameId</Keyword>
<Text>Build</Text>
</Translation>
<Translation>
<Keyword>BuildDescriptionId</Keyword>
<Text>Create STL file for export</Text>
</Translation>
<Translation>
<Keyword>HelpMenuId</Keyword>
<Text>Help</Text>
</Translation>
<Translation>
<Keyword>LoadProjectMenuId</Keyword>
<Text>Load project</Text>
</Translation>
<Translation>
<Keyword>LoadSceneMenuId</Keyword>
<Text>Load scene</Text>
</Translation>
<Translation>
<Keyword>LoadJawMenuId</Keyword>
<Text>Load jaw</Text>
</Translation>
<Translation>
<Keyword>SettingsMenuId</Keyword>
<Text>Settings</Text>
</Translation>
<Translation>
<Keyword>GPUMenuId</Keyword>
<Text>GPU</Text>
</Translation>
<Translation>
<Keyword>AboutMenuId</Keyword>
<Text>About</Text>
</Translation>
<Translation>
<Keyword>SaveMenuId</Keyword>
<Text>Save</Text>
</Translation>
<Translation>
<Keyword>SaveAsMenuId</Keyword>
<Text>Save as</Text>
</Translation>
<Translation>
<Keyword>ShowHideGroupsMenuId</Keyword>
<Text>Show/hide groups</Text>
</Translation>
<Translation>
<Keyword>ShowHideScanColorsMenuId</Keyword>
<Text>Show/hide scan colors</Text>
</Translation>
<Translation>
<Keyword>SaveDraftedRefractoryMenuId</Keyword>
<Text>Save drafted refractory</Text>
</Translation>
<Translation>
<Keyword>SaveDraftedRefractoryWithBlockoutMenuId</Keyword>
<Text>Save drafted refractory with blockout</Text>
</Translation>
<Translation>
<Keyword>FDITwoDigitId</Keyword>
<Text>FDITwoDigit</Text>
</Translation>
<Translation>
<Keyword>UniversalNumberingSystemId</Keyword>
<Text>UniversalNumberingSystem</Text>
</Translation>
<Translation>
<Keyword>PalmerId</Keyword>
<Text>Palmer</Text>
</Translation>
<Translation>
<Keyword>SceneFileAlreadyExistsId</Keyword>
<Text>There is already a scene file "%s"
in the project directory.</Text>
</Translation>
<Translation>
<Keyword>SettingsDialogTitleId</Keyword>
<Text>Settings (may require relaunch to take effect)</Text>
</Translation>
<Translation>
<Keyword>ToothNumberingSystemId</Keyword>
<Text>Tooth Numbering System:</Text>
</Translation>
<Translation>
<Keyword>OpenUserPrefencesFileId</Keyword>
<Text>Open user preferences file</Text>
</Translation>
<Translation>
<Keyword>AdvancedRenderingId</Keyword>
<Text>Advanced rendering</Text>
</Translation>
<Translation>
<Keyword>JawTypeUpperId</Keyword>
<Text>Upper</Text>
</Translation>
<Translation>
<Keyword>JawTypeLowerId</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>ScanTypeIsId</Keyword>
<Text>Scan is:</Text>
</Translation>
<Translation>
<Keyword>WorkflowContainsId</Keyword>
<Text>Workflow contains:</Text>
</Translation>
<Translation>
<Keyword>FlexibleId</Keyword>
<Text>Flexible</Text>
</Translation>
<Translation>
<Keyword>ImportedPartsId</Keyword>
<Text>Imported parts</Text>
</Translation>
<Translation>
<Keyword>NoSupportBarId</Keyword>
<Text>No support bar</Text>
</Translation>
<Translation>
<Keyword>AddApronId</Keyword>
<Text>Add apron</Text>
</Translation>
<Translation>
<Keyword>AntagonistsId</Keyword>
<Text>Antagonists</Text>
</Translation>
<Translation>
<Keyword>JawScansId</Keyword>
<Text>Jaw scans</Text>
</Translation>
<Translation>
<Keyword>AllOtherPartsId</Keyword>
<Text>All other parts</Text>
</Translation>
<Translation>
<Keyword>AntagonistId</Keyword>
<Text>Antagonist</Text>
</Translation>
<Translation>
<Keyword>JawScanId</Keyword>
<Text>Jaw scan</Text>
</Translation>
<Translation>
<Keyword>OtherPartId</Keyword>
<Text>Other part</Text>
</Translation>
<Translation>
<Keyword>ErrorId</Keyword>
<Text>Error</Text>
</Translation>
<Translation>
<Keyword>ShowHideGroupId</Keyword>
<Text>SHOW/HIDE</Text>
</Translation>
<Translation>
<Keyword>PartialGroupId</Keyword>
<Text>PARTIAL</Text>
</Translation>
<Translation>
<Keyword>HiddenGroupId</Keyword>
<Text>HIDDEN</Text>
</Translation>
<Translation>
<Keyword>ShowAllButtonId</Keyword>
<Text>Show all</Text>
</Translation>
<Translation>
<Keyword>WaxNameId</Keyword>
<Text>Wax</Text>
</Translation>
<Translation>
<Keyword>RefractoryNameId</Keyword>
<Text>Refractory</Text>
</Translation>
<Translation>
<Keyword>BlockoutNameId</Keyword>
<Text>Blockout</Text>
</Translation>
<Translation>
<Keyword>BuildNumberedNameId</Keyword>
<Text>Build part %d</Text>
</Translation>
<Translation>
<Keyword>ScanNameId</Keyword>
<Text>Scan</Text>
</Translation>
<Translation>
<Keyword>AntagonistNameId</Keyword>
<Text>Antagonist</Text>
</Translation>
<Translation>
<Keyword>ImportedPartId</Keyword>
<Text>Imported part</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorCurveNameId</Keyword>
<Text>Major connector</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorCurveNumberedNameId</Keyword>
<Text>Major connector curve %d</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorHoleCurveNameId</Keyword>
<Text>Major connector hole</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorHoleCurveNumberedNameId</Keyword>
<Text>Major connector hole curve %d</Text>
</Translation>
<Translation>
<Keyword>MeshRiserCurveNameId</Keyword>
<Text>Mesh riser</Text>
</Translation>
<Translation>
<Keyword>MeshRiserCurveNumberedNameId</Keyword>
<Text>Mesh riser curve %d</Text>
</Translation>
<Translation>
<Keyword>MeshRiserHoleCurveNameId</Keyword>
<Text>Mesh riser hole</Text>
</Translation>
<Translation>
<Keyword>MeshRiserHoleCurveNumberedNameId</Keyword>
<Text>Mesh riser hole curve %d</Text>
</Translation>
<Translation>
<Keyword>MeshRiserTissueSupportCurveNameId</Keyword>
<Text>Tissue support</Text>
</Translation>
<Translation>
<Keyword>MeshRiserTissueSupportCurveNumberedNameId</Keyword>
<Text>Tissue support curve %d</Text>
</Translation>
<Translation>
<Keyword>ClaspCurveNameId</Keyword>
<Text>Clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspCurveNumberedNameId</Keyword>
<Text>Clasp curve %d</Text>
</Translation>
<Translation>
<Keyword>FinishLineCurveNameId</Keyword>
<Text>Finish line</Text>
</Translation>
<Translation>
<Keyword>FinishLineCurveNumberedNameId</Keyword>
<Text>Finish line curve %d</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorCurveNameId</Keyword>
<Text>Minor connector</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorCurveNumberedNameId</Keyword>
<Text>Minor connector curve %d</Text>
</Translation>
<Translation>
<Keyword>ClaspApproachCurveNameId</Keyword>
<Text>Clasp approach</Text>
</Translation>
<Translation>
<Keyword>ClaspApproachCurveNumberedNameId</Keyword>
<Text>Clasp approach curve %d</Text>
</Translation>
<Translation>
<Keyword>BuildPartId</Keyword>
<Text>Output part %d</Text>
</Translation>
<Translation>
<Keyword>SkippingUnfitCurveWithExplanationId</Keyword>
<Text>Curves fit to the surface will not be used.
If you really want to use this curve, go to the curve tool,
select 'Edit curve', select the curve, and deselect the 'Fit curve' button.</Text>
</Translation>
<Translation>
<Keyword>english</Keyword>
<Text>english</Text>
</Translation>
<Translation>
<Keyword>german</Keyword>
<Text>german</Text>
</Translation>
<Translation>
<Keyword>UndercutColorScaleId</Keyword>
<Text>Undercut color scale</Text>
</Translation>
<Translation>
<Keyword>DepthId</Keyword>
<Text>Depth:</Text>
</Translation>
<Translation>
<Keyword>ColorId</Keyword>
<Text>Color:</Text>
</Translation>
<Translation>
<Keyword>mm</Keyword>
<Text>mm</Text>
</Translation>
<Translation>
<Keyword>SettingsId</Keyword>
<Text>Settings</Text>
</Translation>
<Translation>
<Keyword>DefaultInsertionId</Keyword>
<Text>Default insertion</Text>
</Translation>
<Translation>
<Keyword>DefaultInsertionToolTipId</Keyword>
<Text>Reset the path of insertion
to the default direction.</Text>
</Translation>
<Translation>
<Keyword>SetInsertionFromViewId</Keyword>
<Text>Set from view</Text>
</Translation>
<Translation>
<Keyword>SetInsertionFromViewToolTipId</Keyword>
<Text>Set the insertion path
to match the view direction.</Text>
</Translation>
<Translation>
<Keyword>SurveyBlockOutUndercutsId</Keyword>
<Text>Block out undercuts</Text>
</Translation>
<Translation>
<Keyword>DraftAngleId</Keyword>
<Text>Draft angle</Text>
</Translation>
<Translation>
<Keyword>DraftAngleToolTipId</Keyword>
<Text>Sets draft angle for
blocking out undercuts.</Text>
</Translation>
<Translation>
<Keyword>SurveyApplyId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>SurveyApplyToolTipId</Keyword>
<Text>Performs the blockout using current
values and insertion axis.</Text>
</Translation>
<Translation>
<Keyword>HardId</Keyword>
<Text>Hard</Text>
</Translation>
<Translation>
<Keyword>SoftId</Keyword>
<Text>Soft</Text>
</Translation>
<Translation>
<Keyword>WaxHardnessId</Keyword>
<Text>Wax hardness</Text>
</Translation>
<Translation>
<Keyword>AreaOfInfluenceId</Keyword>
<Text>Area of influence</Text>
</Translation>
<Translation>
<Keyword>SmallId</Keyword>
<Text>Small</Text>
</Translation>
<Translation>
<Keyword>LargeId</Keyword>
<Text>Large</Text>
</Translation>
<Translation>
<Keyword>SmoothToggleId</Keyword>
<Text>Smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothToggleToolTipId</Keyword>
<Text>Switch to smoothing mode</Text>
</Translation>
<Translation>
<Keyword>SmudgeToggleId</Keyword>
<Text>Smudge</Text>
</Translation>
<Translation>
<Keyword>SmudgeToggleToolTipId</Keyword>
<Text>Switch to smudging mode</Text>
</Translation>
<Translation>
<Keyword>FillRemovedBlockoutWithWaxId</Keyword>
<Text>Fill removed blockout with wax</Text>
</Translation>
<Translation>
<Keyword>FillRemovedBlockoutWithWaxToolTipId</Keyword>
<Text>Removed blockout will become wax
after leaving the tool</Text>
</Translation>
<Translation>
<Keyword>ShowWaxId</Keyword>
<Text>Show wax</Text>
</Translation>
<Translation>
<Keyword>ShowWaxToolTipId</Keyword>
<Text>Show the hidden wax.
Suspends blockout editing.</Text>
</Translation>
<Translation>
<Keyword>ToolSizeId</Keyword>
<Text>Tool size</Text>
</Translation>
<Translation>
<Keyword>DefaultSmudgeStatusBarId</Keyword>
<Text>Drag mouse to remove, SHIFT and drag to add blockout. Use ALT-1 to toggle smoothing.</Text>
</Translation>
<Translation>
<Keyword>DefaultSmoothStatusBarId</Keyword>
<Text>Drag mouse over blockout to smooth. Use ALT-1 to toggle to smudging, ALT-234 for modes.</Text>
</Translation>
<Translation>
<Keyword>SmoothLevelId</Keyword>
<Text>Smooth level</Text>
</Translation>
<Translation>
<Keyword>SmoothLevelToolTipId</Keyword>
<Text>Smoothing strength</Text>
</Translation>
<Translation>
<Keyword>ReadyId</Keyword>
<Text>Ready</Text>
</Translation>
<Translation>
<Keyword>SurveyInfoId</Keyword>
<Text>Orient and set the desired path of insertion, then press 'Apply' to block out undercuts.</Text>
</Translation>
<Translation>
<Keyword>GpuInitFirstTimeId</Keyword>
<Text>Initializing GPU (first-time initialization may take a few minutes).</Text>
</Translation>
<Translation>
<Keyword>OpeningSelectedModelId</Keyword>
<Text>Opening selected model</Text>
</Translation>
<Translation>
<Keyword>PreparingToEditBlockoutId</Keyword>
<Text>Preparing to edit blockout</Text>
</Translation>
<Translation>
<Keyword>SmoothMeltToolTipId</Keyword>
<Text>Melt smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothMaterialToolTipId</Keyword>
<Text>Regular smooth</Text>
</Translation>
<Translation>
<Keyword>AddMaterialToolTipId</Keyword>
<Text>Additive Smooth</Text>
</Translation>
<Translation>
<Keyword>RemoveMaterialToolTipId</Keyword>
<Text>Subtractive smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothMeltId</Keyword>
<Text>Melt smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothMaterialId</Keyword>
<Text>Regular smooth</Text>
</Translation>
<Translation>
<Keyword>AddMaterialId</Keyword>
<Text>Additive smooth</Text>
</Translation>
<Translation>
<Keyword>RemoveMaterialId</Keyword>
<Text>Subtractive smooth</Text>
</Translation>
<Translation>
<Keyword>WaxHardnessToolTipId</Keyword>
<Text>Controls tool speed</Text>
</Translation>
<Translation>
<Keyword>AreaOfInfluenceToolTipId</Keyword>
<Text>Sets area of influence</Text>
</Translation>
<Translation>
<Keyword>UndoId</Keyword>
<Text>Undo</Text>
</Translation>
<Translation>
<Keyword>RedoId</Keyword>
<Text>Redo</Text>
</Translation>
<Translation>
<Keyword>SettingsToolTipId</Keyword>
<Text>Show advanced settings</Text>
</Translation>
<Translation>
<Keyword>GeneratingRefractoryColorMapId</Keyword>
<Text>Generating a color map to indicate the depth of refractory undercuts.</Text>
</Translation>
<Translation>
<Keyword>GeneratingMeshColorMapId</Keyword>
<Text>Generating a color map to indicate the depth of mesh undercuts.</Text>
</Translation>
<Translation>
<Keyword>GeneratingRefractoryId</Keyword>
<Text>Generating refractory model</Text>
</Translation>
<Translation>
<Keyword>UpdatingUndercutColorsId</Keyword>
<Text>Updating undercut colors</Text>
</Translation>
<Translation>
<Keyword>ReloadingSurveyToolId</Keyword>
<Text>Reloading the survey tool</Text>
</Translation>
<Translation>
<Keyword>FinishingSurveyId</Keyword>
<Text>Updating the refractory model with blockout wax and generating undercut depth coloring.</Text>
</Translation>
<Translation>
<Keyword>SetsToolSizeId</Keyword>
<Text>Sets tool size (SHIFT +/-)</Text>
</Translation>
<Translation>
<Keyword>DrawNewCurveId</Keyword>
<Text>Draw new curve</Text>
</Translation>
<Translation>
<Keyword>DrawNewCurveToolTipId</Keyword>
<Text>Click to add points.
Double click to end.</Text>
</Translation>
<Translation>
<Keyword>DrawReplaceSegmentId</Keyword>
<Text>Draw/replace segment</Text>
</Translation>
<Translation>
<Keyword>DrawReplaceSegmentToolTipId</Keyword>
<Text>Start and end new segment
on an existing curve.</Text>
</Translation>
<Translation>
<Keyword>MoveControlPointsId</Keyword>
<Text>Edit curve</Text>
</Translation>
<Translation>
<Keyword>MoveControlPointsToolTipId</Keyword>
<Text>Select the curve you want to edit.</Text>
</Translation>
<Translation>
<Keyword>CurveFittingId</Keyword>
<Text>Fitting:</Text>
</Translation>
<Translation>
<Keyword>FitToWaxId</Keyword>
<Text>Fit to wax</Text>
</Translation>
<Translation>
<Keyword>FitToWaxToolTipId</Keyword>
<Text>Fit curve to topmost surface.
Uncheck to free-float curve between points.</Text>
</Translation>
<Translation>
<Keyword>FitToRefractoryId</Keyword>
<Text>Fit to refractory</Text>
</Translation>
<Translation>
<Keyword>FitToRefractoryToolTipId</Keyword>
<Text>Fit curve control points under the wax</Text>
</Translation>
<Translation>
<Keyword>FitToMeshId</Keyword>
<Text>Fit to model scan</Text>
</Translation>
<Translation>
<Keyword>FitToMeshToolTipId</Keyword>
<Text>Fit curve to mesh</Text>
</Translation>
<Translation>
<Keyword>TwoPointCurveId</Keyword>
<Text>Two-point curve:</Text>
</Translation>
<Translation>
<Keyword>AttachableCurveId</Keyword>
<Text>T-junction curve:</Text>
</Translation>
<Translation>
<Keyword>LeaveCurvesOpenId</Keyword>
<Text>Leave curves open:</Text>
</Translation>
<Translation>
<Keyword>CurveLengthId</Keyword>
<Text>Curve length (mm)</Text>
</Translation>
<Translation>
<Keyword>EditPointsId</Keyword>
<Text>Edit points</Text>
</Translation>
<Translation>
<Keyword>ReduceToleranceId</Keyword>
<Text>Tolerance:</Text>
</Translation>
<Translation>
<Keyword>ReduceToleranceToolTipId</Keyword>
<Text>Reduce triangles in output within a specified tolerance</Text>
</Translation>
<Translation>
<Keyword>OrientToInsertionId</Keyword>
<Text>Orient to insertion axis</Text>
</Translation>
<Translation>
<Keyword>OrientToInsertionToolTipId</Keyword>
<Text>Rotate output to insertion axis</Text>
</Translation>
<Translation>
<Keyword>AutoReliefId</Keyword>
<Text>Auto relief</Text>
</Translation>
<Translation>
<Keyword>AutoReliefToolTipId</Keyword>
<Text>Use algorithm to improve fit</Text>
</Translation>
<Translation>
<Keyword>FillVoidCheckId</Keyword>
<Text>Fill void check</Text>
</Translation>
<Translation>
<Keyword>FillVoidCheckToolTipId</Keyword>
<Text>Find and fill any voids in wax</Text>
</Translation>
<Translation>
<Keyword>DeleteSceneOnExitId</Keyword>
<Text>Delete scene on exit</Text>
</Translation>
<Translation>
<Keyword>DeleteConstructedPartId</Keyword>
<Text>Delete constructed part</Text>
</Translation>
<Translation>
<Keyword>BuildCompleteId</Keyword>
<Text>Build complete</Text>
</Translation>
<Translation>
<Keyword>SavingTheModelId</Keyword>
<Text>Saving the model</Text>
</Translation>
<Translation>
<Keyword>RemovingRefractoryId</Keyword>
<Text>Removing refractory</Text>
</Translation>
<Translation>
<Keyword>BuildInProgressId</Keyword>
<Text>Save for build in progress, please wait...</Text>
</Translation>
<Translation>
<Keyword>BuildFailedId</Keyword>
<Text>Build failed</Text>
</Translation>
<Translation>
<Keyword>VirtualModelId</Keyword>
<Text>Creating virtual model</Text>
</Translation>
<Translation>
<Keyword>FillingVoidsId</Keyword>
<Text>Filling voids</Text>
</Translation>
<Translation>
<Keyword>ApplyingAutoReliefId</Keyword>
<Text>Applying auto relief</Text>
</Translation>
<Translation>
<Keyword>ReducingNewMeshId</Keyword>
<Text>Creating new mesh. Please wait.</Text>
</Translation>
<Translation>
<Keyword>ExportingStlId</Keyword>
<Text>Exporting STL</Text>
</Translation>
<Translation>
<Keyword>RemovingSceneFileId</Keyword>
<Text>Removing scene file</Text>
</Translation>
<Translation>
<Keyword>RestoringSceneId</Keyword>
<Text>Restoring scene</Text>
</Translation>
<Translation>
<Keyword>SavingSceneId</Keyword>
<Text>Saving scene</Text>
</Translation>
<Translation>
<Keyword>TriangleReductionId</Keyword>
<Text>Reducing triangles</Text>
</Translation>
<Translation>
<Keyword>GeneratingTrianglesId</Keyword>
<Text>Generating triangles</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildId</Keyword>
<Text>Save for build</Text>
</Translation>
<Translation>
<Keyword>IncreasingModelToFitId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>CuttingPartialPonticNumId</Keyword>
<Text>Cutting partial pontic %s</Text>
</Translation>
<Translation>
<Keyword>MakingPartialPonticNumHollowId</Keyword>
<Text>Making partial pontic %s hollow</Text>
</Translation>
<Translation>
<Keyword>InsertingPartNumId</Keyword>
<Text>Inserting part %s</Text>
</Translation>
<Translation>
<Keyword>AdvancedDialogTitleId</Keyword>
<Text>Advanced</Text>
</Translation>
<Translation>
<Keyword>DefaultButtonId</Keyword>
<Text>Use defaults</Text>
</Translation>
<Translation>
<Keyword>ScaleModelId</Keyword>
<Text>Scale</Text>
</Translation>
<Translation>
<Keyword>StaticReliefId</Keyword>
<Text>Static relief</Text>
</Translation>
<Translation>
<Keyword>ClaspAreaId</Keyword>
<Text>Clasps</Text>
</Translation>
<Translation>
<Keyword>OtherAreaId</Keyword>
<Text>Other</Text>
</Translation>
<Translation>
<Keyword>DynamicReliefId</Keyword>
<Text>Dynamic relief</Text>
</Translation>
<Translation>
<Keyword>OtherAreaNotClaspsId</Keyword>
<Text>Other (except clasps)</Text>
</Translation>
<Translation>
<Keyword>ConnectorAreaId</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>ImportedPartsAreaId</Keyword>
<Text>Imported parts</Text>
</Translation>
<Translation>
<Keyword>ClearId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>ApplyId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>SubtractPipeId</Keyword>
<Text>Subtract pipe</Text>
</Translation>
<Translation>
<Keyword>SubtractPipeToolTipId</Keyword>
<Text>Remove wax from model with pipe</Text>
</Translation>
<Translation>
<Keyword>AddPipeId</Keyword>
<Text>Add pipe</Text>
</Translation>
<Translation>
<Keyword>AddPipeToolTipId</Keyword>
<Text>Add pipe to wax</Text>
</Translation>
<Translation>
<Keyword>EndPipeDiamId</Keyword>
<Text>End diam.</Text>
</Translation>
<Translation>
<Keyword>EndPipeDiamToolTipId</Keyword>
<Text>To create a variable diameter pipe,
enable the 'End diameter' field.</Text>
</Translation>
<Translation>
<Keyword>StartPipeDiamId</Keyword>
<Text>Start diam.</Text>
</Translation>
<Translation>
<Keyword>BlendSmoothlyIntoMaskId</Keyword>
<Text>Blend smoothly into mask</Text>
</Translation>
<Translation>
<Keyword>BlendSmoothlyIntoMaskToolTipId</Keyword>
<Text>Make smooth transition to mask boundary</Text>
</Translation>
<Translation>
<Keyword>HidingBlockoutAndRefractoryId</Keyword>
<Text>Hiding blockout and refractory</Text>
</Translation>
<Translation>
<Keyword>HideBlockoutAndRefractoryId</Keyword>
<Text>Hide blockout and refractory</Text>
</Translation>
<Translation>
<Keyword>HideBlockoutAndRefractoryToolTipId</Keyword>
<Text>Temporarily remove refractory
to edit bottom of the wax.</Text>
</Translation>
<Translation>
<Keyword>ThicknessId</Keyword>
<Text>Thickness</Text>
</Translation>
<Translation>
<Keyword>ThicknessAdvId</Keyword>
<Text>Thickness:</Text>
</Translation>
<Translation>
<Keyword>CurvePipeMessageId</Keyword>
<Text>Select one or more curves to create a pipe.</Text>
</Translation>
<Translation>
<Keyword>ClearPipeId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>ClearPipeToolTipId</Keyword>
<Text>Clears all selected curves.</Text>
</Translation>
<Translation>
<Keyword>SmoothingWaxId</Keyword>
<Text>Smoothing the selected wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>DragToSmoothId</Keyword>
<Text>Drag mouse over wax to smooth.</Text>
</Translation>
<Translation>
<Keyword>SmoothSmudgeId</Keyword>
<Text>Drag mouse to remove. Drag mouse and press SHIFT to add.</Text>
</Translation>
<Translation>
<Keyword>CreateMeshId</Keyword>
<Text>Create mesh</Text>
</Translation>
<Translation>
<Keyword>CreateConnectorId</Keyword>
<Text>Create connector</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewId</Keyword>
<Text>Preview</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewToolTipId</Keyword>
<Text>Preview the mesh</Text>
</Translation>
<Translation>
<Keyword>MeshClearId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>MeshClearToolTipId</Keyword>
<Text>Clear the preview</Text>
</Translation>
<Translation>
<Keyword>MeshApplyId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>MeshConnectorSelectId</Keyword>
<Text>Use the mouse to (de)select curve loops that you wish to use, use CTRL to force the curve to be a connector curve.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserComputingId</Keyword>
<Text>Wrapping preview of mesh image to wax, please wait...</Text>
</Translation>
<Translation>
<Keyword>ApplyWaitId</Keyword>
<Text>Applying wax, please wait...</Text>
</Translation>
<Translation>
<Keyword>ModifyingWaitId</Keyword>
<Text>Modifying mesh, please wait...</Text>
</Translation>
<Translation>
<Keyword>LoadTextureWaitId</Keyword>
<Text>Loading new pattern, please wait...</Text>
</Translation>
<Translation>
<Keyword>UnknownErrorId</Keyword>
<Text>An unknown error occurred.</Text>
</Translation>
<Translation>
<Keyword>RepositionTriadId</Keyword>
<Text>Drag the on-screen interactor to scale and position the mesh preview.</Text>
</Translation>
<Translation>
<Keyword>TranslateTextureId</Keyword>
<Text>Drag the image</Text>
</Translation>
<Translation>
<Keyword>RotateTextureId</Keyword>
<Text>Rotate the image</Text>
</Translation>
<Translation>
<Keyword>ScaleTextureId</Keyword>
<Text>Scale the image</Text>
</Translation>
<Translation>
<Keyword>EmbossOffsetId</Keyword>
<Text>Change the emboss distance</Text>
</Translation>
<Translation>
<Keyword>AdjustMeshPreviewId</Keyword>
<Text>Adjust the preview by manipulating the triad or settings. When done, press 'Apply' to create the wax.</Text>
</Translation>
<Translation>
<Keyword>TextureId</Keyword>
<Text>Pattern:</Text>
</Translation>
<Translation>
<Keyword>HoleSizeId</Keyword>
<Text>Hole size:</Text>
</Translation>
<Translation>
<Keyword>MeshThicknessId</Keyword>
<Text>Mesh wax:</Text>
</Translation>
<Translation>
<Keyword>MeshReliefWaxId</Keyword>
<Text>Relief wax:</Text>
</Translation>
<Translation>
<Keyword>MeshSMoothingId</Keyword>
<Text>Smoothing:</Text>
</Translation>
<Translation>
<Keyword>MeshTensionId</Keyword>
<Text>Tension:</Text>
</Translation>
<Translation>
<Keyword>StippleScaleId</Keyword>
<Text>Scale:</Text>
</Translation>
<Translation>
<Keyword>StippleThicknessId</Keyword>
<Text>Offset:</Text>
</Translation>
<Translation>
<Keyword>BaseThicknessId</Keyword>
<Text>Thickness:</Text>
</Translation>
<Translation>
<Keyword>ConnectorUseFalloffId</Keyword>
<Text>Use falloff</Text>
</Translation>
<Translation>
<Keyword>LinearFalloffId</Keyword>
<Text>Linear falloff:</Text>
</Translation>
<Translation>
<Keyword>PartialMeshId</Keyword>
<Text>Mesh</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorId</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>LowId</Keyword>
<Text>Low</Text>
</Translation>
<Translation>
<Keyword>MediumId</Keyword>
<Text>Medium</Text>
</Translation>
<Translation>
<Keyword>HighId</Keyword>
<Text>High</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>BEGO-Coarse</Keyword>
<Text>Coarse</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>BEGO-Fine</Keyword>
<Text>Fine</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>Leather-1</Keyword>
<Text>Leather 1</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>Leather-2</Keyword>
<Text>Leather 2</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>Smooth-1</Keyword>
<Text>Smooth</Text>
</Translation>
<Translation>
<!-- Mesh Riser texture filename -->
<Keyword>Round-1</Keyword>
<Text>Round</Text>
</Translation>
<Translation>
<!-- Mesh Riser texture filename -->
<Keyword>Square-1</Keyword>
<Text>Square</Text>
</Translation>
<Translation>
<Keyword>ApplyingWaxHoleWaitId</Keyword>
<Text>Applying wax hole, please wait...</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorCurveSelectId</Keyword>
<Text>First, select the outer curve loop defining the wax area, then, if desired, an inner curve loop to create a hole.</Text>
</Translation>
<Translation>
<Keyword>GpuComputationPrepId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>ComputingMaskVolId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>ComputingMaskDistanceVolId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>ConvertingToWaxWaitId</Keyword>
<Text>Converting to wax, please wait...</Text>
</Translation>
<Translation>
<Keyword>StippleId</Keyword>
<Text>Stipple pattern</Text>
</Translation>
<Translation>
<Keyword>MeshRiserAutoSelectId</Keyword>
<Text>Auto-select</Text>
</Translation>
<Translation>
<Keyword>MeshRiserAutoSelectToolTipId</Keyword>
<Text>Automatically select the curve-bounded mesh regions. Invisible curves will be skipped.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserSelectCurvesId</Keyword>
<Text>Select a set of curves that enclose the wax region to be embossed.</Text>
</Translation>
<!-- clasp profile filenames begin-->
<Translation>
<Keyword>ApproachArm</Keyword>
<Text>Approach arm</Text>
</Translation>
<Translation>
<Keyword>Anterior</Keyword>
<Text>Anterior</Text>
</Translation>
<Translation>
<Keyword>Posterior</Keyword>
<Text>Posterior</Text>
</Translation>
<Translation>
<Keyword>GuidePlane</Keyword>
<Text>Guide plane</Text>
</Translation>
<Translation>
<Keyword>Ring</Keyword>
<Text>Ring</Text>
</Translation>
<Translation>
<Keyword>RoundWire</Keyword>
<Text>Round wire</Text>
</Translation>
<!-- clasp profile filenames end-->
<Translation>
<Keyword>ClaspTypeId</Keyword>
<Text>Type:</Text>
</Translation>
<Translation>
<Keyword>ClaspType1Id</Keyword>
<Text>Ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType2Id</Keyword>
<Text>Ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType3Id</Keyword>
<Text>J clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType4Id</Keyword>
<Text>T clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType5Id</Keyword>
<Text>T clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType1ToolTipId</Keyword>
<Text>Single curve ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType2ToolTipId</Keyword>
<Text>Dual curve ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType3ToolTipId</Keyword>
<Text>Dual curve J clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType4ToolTipId</Keyword>
<Text>Dual curve T clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType5ToolTipId</Keyword>
<Text>Triple curve T clasp</Text>
</Translation>
<Translation>
<Keyword>ProfileId</Keyword>
<Text>Profile</Text>
</Translation>
<Translation>
<Keyword>FlipProfileId</Keyword>
<Text>Flip profile</Text>
</Translation>
<Translation>
<Keyword>FlipProfileToolTipId</Keyword>
<Text>Flip profile</Text>
</Translation>
<Translation>
<Keyword>RotateProfileId</Keyword>
<Text>Rotate profile</Text>
</Translation>
<Translation>
<Keyword>RotateProfileToolTipId</Keyword>
<Text>Rotate the profile 180 degrees</Text>
</Translation>
<Translation>
<Keyword>EditProfileId</Keyword>
<Text>Edit profile</Text>
</Translation>
<Translation>
<Keyword>EditProfileToolTipId</Keyword>
<Text>Edit this profile, delete it
or create a new one.</Text>
</Translation>
<Translation>
<Keyword>SaveId</Keyword>
<Text>Save</Text>
</Translation>
<Translation>
<Keyword>SaveAsId</Keyword>
<Text>Save as</Text>
</Translation>
<Translation>
<Keyword>DeleteId</Keyword>
<Text>Delete</Text>
</Translation>
<Translation>
<Keyword>DoneId</Keyword>
<Text>Done</Text>
</Translation>
<Translation>
<Keyword>OverwriteProfileId</Keyword>
<Text>Overwrite existing profile named "%s"?</Text>
</Translation>
<Translation>
<Keyword>ChooseUniqueProfileNameId</Keyword>
<Text>Choose a unique name for your custom profile,
unless you wish to replace an existing profile.</Text>
</Translation>
<Translation>
<Keyword>SaveCustomProfileId</Keyword>
<Text>Save custom profile</Text>
</Translation>
<Translation>
<Keyword>NumberId</Keyword>
<Text>Number:</Text>
</Translation>
<Translation>
<Keyword>NameId</Keyword>
<Text>Name</Text>
</Translation>
<Translation>
<Keyword>PipeProgressId</Keyword>
<Text>Converting pipe to wax</Text>
</Translation>
<Translation>
<Keyword>SelectSingleCurveForClaspId</Keyword>
<Text>Select a single curve to form the clasp</Text>
</Translation>
<Translation>
<Keyword>SelectTwoCurvesForClaspId</Keyword>
<Text>Select two curves to form the clasp</Text>
</Translation>
<Translation>
<Keyword>SelectTwoCurvesForClaspRingFirstId</Keyword>
<Text>Select two curves to form the clasp. The connector curve must be selected before the ring curve.</Text>
</Translation>
<Translation>
<Keyword>SelectThreeCurvesForClaspRingFirstId</Keyword>
<Text>Select three curves to form the clasp. The connector curve must be selected before the ring curves.</Text>
</Translation>
<Translation>
<Keyword>WidthAdvId</Keyword>
<Text>Width:</Text>
</Translation>
<Translation>
<Keyword>Width1Id</Keyword>
<Text>Width 1:</Text>
</Translation>
<Translation>
<Keyword>Width2Id</Keyword>
<Text>Width 2:</Text>
</Translation>
<Translation>
<Keyword>Width3Id</Keyword>
<Text>Width 3:</Text>
</Translation>
<Translation>
<Keyword>LengthId</Keyword>
<Text>Length</Text>
</Translation>
<Translation>
<Keyword>LengthAdvId</Keyword>
<Text>Length:</Text>
</Translation>
<Translation>
<Keyword>ClaspAdvId</Keyword>
<Text>Clasp:</Text>
</Translation>
<Translation>
<Keyword>ApproachAdvId</Keyword>
<Text>Approach:</Text>
</Translation>
<Translation>
<Keyword>SwapEndsId</Keyword>
<Text>Swap ends</Text>
</Translation>
<Translation>
<Keyword>SizeId</Keyword>
<Text>Size</Text>
</Translation>
<Translation>
<Keyword>TaperEndsId</Keyword>
<Text>Taper ends</Text>
</Translation>
<Translation>
<Keyword>OffsetAboveSurfaceId</Keyword>
<Text>Offset above surface</Text>
</Translation>
<Translation>
<Keyword>TaperLengthFromEnd1Id</Keyword>
<Text>Taper length from end 1</Text>
</Translation>
<Translation>
<Keyword>SettingsAdvId</Keyword>
<Text>Settings: </Text>
</Translation>
<Translation>
<Keyword>FinishlinePreviewId</Keyword>
<Text>Preview</Text>
</Translation>
<Translation>
<Keyword>FinishlinePreviewToolTipId</Keyword>
<Text>Preview the finish line</Text>
</Translation>
<Translation>
<Keyword>FixedAspectId</Keyword>
<Text>Fixed aspect</Text>
</Translation>
<Translation>
<Keyword>ActualSizeId</Keyword>
<Text>Actual size</Text>
</Translation>
<Translation>
<Keyword>DepthBelowSurfaceId</Keyword>
<Text>Depth below surface</Text>
</Translation>
<!-- finishline profile filenames begin -->
<Translation>
<Keyword>Lower</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>Sharkfin</Keyword>
<Text>Shark fin</Text>
</Translation>
<Translation>
<Keyword>Standard-1</Keyword>
<Text>Standard 1</Text>
</Translation>
<Translation>
<Keyword>Standard-2</Keyword>
<Text>Standard 2</Text>
</Translation>
<Translation>
<Keyword>Upper</Keyword>
<Text>Upper</Text>
</Translation>
<!-- finishline profile filenames end -->
<Translation>
<Keyword>ProfileOrientationId</Keyword>
<Text>Profile orientation</Text>
</Translation>
<Translation>
<Keyword>CreateEndcapsId</Keyword>
<Text>Capped ends</Text>
</Translation>
<Translation>
<Keyword>WaxSurfaceId</Keyword>
<Text>Wax surface</Text>
</Translation>
<Translation>
<Keyword>RefractorySurfaceId</Keyword>
<Text>Refractory surface</Text>
</Translation>
<Translation>
<Keyword>InsertionPathId</Keyword>
<Text>Insertion path</Text>
</Translation>
<Translation>
<Keyword>CurveTangentId</Keyword>
<Text>Curve tangent</Text>
</Translation>
<Translation>
<Keyword>NoRotationId</Keyword>
<Text>No rotation</Text>
</Translation>
<!-- bar profile filenames begin -->
<Translation>
<Keyword>Circle</Keyword>
<Text>Circle</Text>
</Translation>
<Translation>
<Keyword>Halfround</Keyword>
<Text>Half round</Text>
</Translation>
<Translation>
<Keyword>Standard</Keyword>
<Text>Standard bar</Text>
</Translation>
<Translation>
<Keyword>TearDrop</Keyword>
<Text>Tear drop</Text>
</Translation>
<!-- bar profile filenames end -->
<Translation>
<Keyword>DefaultId</Keyword>
<Text>Default</Text>
</Translation>
<Translation>
<Keyword>AddWaxWaitId</Keyword>
<Text>Adding wax. This may take a few moments.</Text>
</Translation>
<Translation>
<Keyword>SelectStlId</Keyword>
<Text>Load scan data</Text>
</Translation>
<Translation>
<Keyword>ConvertingPartsToWaxId</Keyword>
<Text>Converting imported part %s to wax</Text>
</Translation>
<Translation>
<Keyword>ConvertingPartsToRefractoryId</Keyword>
<Text>Converting imported part %s to refractory</Text>
</Translation>
<Translation>
<Keyword>AddFileId</Keyword>
<Text>Add file</Text>
</Translation>
<Translation>
<Keyword>ConvertToWaxId</Keyword>
<Text>Convert to wax</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsReferenceId</Keyword>
<Text>Reference</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsWaxId</Keyword>
<Text>Editable</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsMergedMeshId</Keyword>
<Text>Non-editable</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsRefactoryId</Keyword>
<Text>Refractory</Text>
</Translation>
<Translation>
<Keyword>SaveAnywayId</Keyword>
<Text>Save anyway</Text>
</Translation>
<Translation>
<Keyword>SaveAnywayExtId</Keyword>
<Text>The existing scene will be overwritten</Text>
</Translation>
<Translation>
<Keyword>SaveAsExtId</Keyword>
<Text>You can select a new location or filename</Text>
</Translation>
<Translation>
<Keyword>SaveKeepBothId</Keyword>
<Text>Save, but keep both files</Text>
</Translation>
<Translation>
<Keyword>SaveKeepBothExtId</Keyword>
<Text>The pre-existing scene will be renamed</Text>
</Translation>
<Translation>
<Keyword>CancelExtId</Keyword>
<Text>The scene will not be saved</Text>
</Translation>
<Translation>
<Keyword>FinishId</Keyword>
<Text>Finish</Text>
</Translation>
<Translation>
<Keyword>MillingId</Keyword>
<Text>Milling</Text>
</Translation>
<Translation>
<Keyword>WatertightnessId</Keyword>
<Text>Watertightness</Text>
</Translation>
<Translation>
<Keyword>FitToPartialFilesId</Keyword>
<Text>Make separate files, fit to partial</Text>
</Translation>
<Translation>
<Keyword>OptimizeMergedPartsForId</Keyword>
<Text>Optimize merged parts for</Text>
</Translation>
<Translation>
<Keyword>PartialPonticsId</Keyword>
<Text>Partial pontics</Text>
</Translation>
<Translation>
<Keyword>MinimumThicknessId</Keyword>
<Text>Minimum thickness</Text>
</Translation>
<Translation>
<Keyword>MakeHollowId</Keyword>
<Text>Make hollow</Text>
</Translation>
<Translation>
<Keyword>DraftAngleForFitToPartialId</Keyword>
<Text>Draft angle</Text>
</Translation>
<Translation>
<Keyword>ToolRadiusForFitToPartialId</Keyword>
<Text>Tool diameter</Text>
</Translation>
<Translation>
<Keyword>GapForFitToPartialId</Keyword>
<Text>Offset</Text>
</Translation>
<Translation>
<Keyword>MakeImportedPartActiveId</Keyword>
<Text>Active</Text>
</Translation>
<Translation>
<Keyword>CutoffForFitToPartialId</Keyword>
<Text>Distance from relief</Text>
</Translation>
<Translation>
<Keyword>InnerTrianglesToRefractory</Keyword>
<Text>Inside to refractory</Text>
</Translation>
<Translation>
<Keyword>OptimizedForMillingId</Keyword>
<Text>Optimized for milling</Text>
</Translation>
<Translation>
<Keyword>OptimizedForWatertightnessId</Keyword>
<Text>Optimized for watertightness</Text>
</Translation>
<Translation>
<Keyword>ImportMeshToReferenceId</Keyword>
<Text>Creating new piece. Please wait...</Text>
</Translation>
<Translation>
<Keyword>ImportGeometryId</Keyword>
<Text>Importing geometry. Please wait...</Text>
</Translation>
<Translation>
<Keyword>ImportMeshToWaxId</Keyword>
<Text>Converting mesh to wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>InvolvedHealthyToothId</Keyword>
<Text>Healthy tooth</Text>
</Translation>
<Translation>
<Keyword>PartialPonticId</Keyword>
<Text>Partial pontic</Text>
</Translation>
<Translation>
<Keyword>PonticId</Keyword>
<Text>Pontic</Text>
</Translation>
<Translation>
<Keyword>CrownId</Keyword>
<Text>Crown</Text>
</Translation>
<Translation>
<Keyword>WaxupId</Keyword>
<Text>Waxup</Text>
</Translation>
<Translation>
<Keyword>InlayId</Keyword>
<Text>Inlay</Text>
</Translation>
<Translation>
<Keyword>BridgeId</Keyword>
<Text>Bridge</Text>
</Translation>
<Translation>
<Keyword>ImportedPartialId</Keyword>
<Text>Imported partial</Text>
</Translation>
<Translation>
<Keyword>TelescopeId</Keyword>
<Text>Telescope</Text>
</Translation>
<Translation>
<Keyword>VeneerId</Keyword>
<Text>Veneer</Text>
</Translation>
<Translation>
<Keyword>CopingId</Keyword>
<Text>Coping</Text>
</Translation>
<Translation>
<Keyword>InnerCopingId</Keyword>
<Text>Inner coping</Text>
</Translation>
<Translation>
<Keyword>AttachmentId</Keyword>
<Text>Attachment</Text>
</Translation>
<Translation>
<Keyword>InnerCrownId</Keyword>
<Text>Inner crown</Text>
</Translation>
<Translation>
<Keyword>InnerWaxupId</Keyword>
<Text>Inner waxup</Text>
</Translation>
<Translation>
<Keyword>InnerBridgeId</Keyword>
<Text>Inner bridge</Text>
</Translation>
<Translation>
<Keyword>BarPillarId</Keyword>
<Text>Bar pillar</Text>
</Translation>
<Translation>
<Keyword>BarSegmentId</Keyword>
<Text>Bar segment</Text>
</Translation>
<Translation>
<Keyword>NextWizardId</Keyword>
<Text>Next</Text>
</Translation>
<Translation>
<Keyword>BackWizardId</Keyword>
<Text>Back</Text>
</Translation>
<Translation>
<Keyword>DoneWizardId</Keyword>
<Text>Done</Text>
</Translation>
<Translation>
<Keyword>WizardId</Keyword>
<Text>Wizard</Text>
</Translation>
<Translation>
<Keyword>ExpertId</Keyword>
<Text>Expert</Text>
</Translation>
<Translation>
<Keyword>FixDraftModeId</Keyword>
<Text>Mode:</Text>
</Translation>
<Translation>
<Keyword>SetPathModeId</Keyword>
<Text>Set path</Text>
</Translation>
<Translation>
<Keyword>SelectAreaId</Keyword>
<Text>Select area</Text>
</Translation>
<Translation>
<Keyword>SelectAreaToolTipId</Keyword>
<Text>Select area</Text>
</Translation>
<Translation>
<Keyword>SetFromViewId</Keyword>
<Text>Set from view</Text>
</Translation>
<Translation>
<Keyword>EraseId</Keyword>
<Text>Erase</Text>
</Translation>
<Translation>
<Keyword>SelectAllId</Keyword>
<Text>Select</Text>
</Translation>
<Translation>
<Keyword>ClearAllId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>InvertSelectionId</Keyword>
<Text>Invert</Text>
</Translation>
<Translation>
<Keyword>EraseToolTipId</Keyword>
<Text>Erase selection</Text>
</Translation>
<Translation>
<Keyword>SelectAllToolTipId</Keyword>
<Text>Select all</Text>
</Translation>
<Translation>
<Keyword>ClearAllToolTipId</Keyword>
<Text>Clear all</Text>
</Translation>
<Translation>
<Keyword>InvertSelectionToolTipId</Keyword>
<Text>Invert selection</Text>
</Translation>
<Translation>
<Keyword>SetFromViewToolTipId</Keyword>
<Text>Set the view to point down the insertion path</Text>
</Translation>
<Translation>
<Keyword>DensityId</Keyword>
<Text>Density</Text>
</Translation>
<Translation>
<Keyword>UndercutId</Keyword>
<Text>Undercut</Text>
</Translation>
<Translation>
<Keyword>BlendWithMaskId</Keyword>
<Text>Blend with mask</Text>
</Translation>
<Translation>
<Keyword>WaxOnlyId</Keyword>
<Text>Wax only</Text>
</Translation>
<Translation>
<Keyword>ApplyFeatherId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>ApplyFeatherToolTipId</Keyword>
<Text>Apply feathering to the boundary</Text>
</Translation>
<Translation>
<Keyword>PreserveDetailId</Keyword>
<Text>Preserve detail</Text>
</Translation>
<Translation>
<Keyword>FillingSelectedWaxId</Keyword>
<Text>Filling the selected wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>SmoothAreaStatusBarId</Keyword>
<Text>Drag mouse over wax to select an area to smooth</Text>
</Translation>
<Translation>
<Keyword>FeatheringWaxId</Keyword>
<Text>Feathering the selected wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>DiameterId</Keyword>
<Text>Diameter</Text>
</Translation>
<Translation>
<Keyword>FeatherLevelId</Keyword>
<Text>Feather level</Text>
</Translation>
<Translation>
<Keyword>FillPassesId</Keyword>
<Text>Fill passes</Text>
</Translation>
<Translation>
<Keyword>FillerPromptSelectRegionId</Keyword>
<Text>Select a set of curves that enclose the wax region to be filled</Text>
</Translation>
<Translation>
<Keyword>ApplyingFillerId</Keyword>
<Text>Applying filler, please wait...</Text>
</Translation>
<Translation>
<Keyword>ThicknessToolTipId</Keyword>
<Text>Extra thickness added to supplement the fill</Text>
</Translation>
<Translation>
<Keyword>ClearFillerId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>ClearFillerToolTipId</Keyword>
<Text>Clear the fill preview and curve selection</Text>
</Translation>
<Translation>
<Keyword>ApplyFillerId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>ApplyFillerToolTipId</Keyword>
<Text>Apply the fill</Text>
</Translation>
<Translation>
<Keyword>FillerThicknessId</Keyword>
<Text>Thickness</Text>
</Translation>
<Translation>
<Keyword>FillSmoothLevelId</Keyword>
<Text>Smooth level</Text>
</Translation>
<Translation>
<Keyword>UseRulerId</Keyword>
<Text>Use ruler</Text>
</Translation>
<Translation>
<Keyword>UseRulerToolTipId</Keyword>
<Text>Display a ToolTip of the distance tugged</Text>
</Translation>
<Translation>
<Keyword>RestrictTugToNormalId</Keyword>
<Text>Tug only straight out of surface</Text>
</Translation>
<Translation>
<Keyword>RestrictTugToNormalToolTipId</Keyword>
<Text>Restrict the tug direction to the surface normal</Text>
</Translation>
<Translation>
<Keyword>TugProcessingId</Keyword>
<Text>Modifying the model. This may take a few moments.</Text>
</Translation>
<Translation>
<Keyword>EmbossPatternId</Keyword>
<Text>Pattern</Text>
</Translation>
<Translation>
<Keyword>EmbossPatternToolTipId</Keyword>
<Text>Change the pattern used for marking wax</Text>
</Translation>
<Translation>
<Keyword>EmbossTextPatternId</Keyword>
<Text>Text as pattern</Text>
</Translation>
<Translation>
<Keyword>EmbossTextPatternToolTipId</Keyword>
<Text>Use text to mark wax</Text>
</Translation>
<Translation>
<Keyword>InvertEmbossPatternId</Keyword>
<Text>Invert the emboss pattern</Text>
</Translation>
<Translation>
<Keyword>InvertEmbossPatternToolTipId</Keyword>
<Text>Invert the emboss pattern</Text>
</Translation>
<Translation>
<Keyword>EmbossPreviewId</Keyword>
<Text>Preview the emboss</Text>
</Translation>
<Translation>
<Keyword>RaiseId</Keyword>
<Text>Raise</Text>
</Translation>
<Translation>
<Keyword>DepressId</Keyword>
<Text>Depth</Text>
</Translation>
<Translation>
<Keyword>RaiseToolTipId</Keyword>
<Text>Add pattern to wax</Text>
</Translation>
<Translation>
<Keyword>DepressToolTipId</Keyword>
<Text>Remove pattern from wax</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveRaiseId</Keyword>
<Text>Raise</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveDepressId</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveRaiseToolTipId</Keyword>
<Text>Raise wax</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveDepressToolTipId</Keyword>
<Text>Lower wax</Text>
</Translation>
<Translation>
<Keyword>FontId</Keyword>
<Text>Font:</Text>
</Translation>
<Translation>
<Keyword>SetFontId</Keyword>
<Text>Set font...</Text>
</Translation>
<Translation>
<Keyword>TextId</Keyword>
<Text>Text:</Text>
</Translation>
<Translation>
<Keyword>UpdateId</Keyword>
<Text>Update</Text>
</Translation>
<Translation>
<Keyword>AddOnTopOfRefractoryId</Keyword>
<Text>Layer on
refractory</Text>
</Translation>
<Translation>
<Keyword>AddOnTopOfRefractoryToolTipId</Keyword>
<Text>Add the wax as a layer on the refractory instead of layering over existing wax.</Text>
</Translation>
<Translation>
<Keyword>EaseInId</Keyword>
<Text>Ease In</Text>
</Translation>
<Translation>
<Keyword>EaseInToolTipId</Keyword>
<Text>Produces a gradual falloff to the boundary over the distance specified.</Text>
</Translation>
<Translation>
<Keyword>RoundId</Keyword>
<Text>Round</Text>
</Translation>
<Translation>
<Keyword>LinearId</Keyword>
<Text>Linear</Text>
</Translation>
<Translation>
<Keyword>LinearToolTipId</Keyword>
<Text>Produces a linear falloff to the boundary over the distance specified</Text>
</Translation>
<Translation>
<Keyword>FalloffAngleId</Keyword>
<Text>Falloff angle</Text>
</Translation>
<Translation>
<Keyword>DistanceId</Keyword>
<Text>Distance</Text>
</Translation>
<Translation>
<Keyword>FalloffDistanceShortId</Keyword>
<Text>Falloff dist.</Text>
</Translation>
<Translation>
<Keyword>RoundToolTipId</Keyword>
<Text>Produces a rounded falloff to the boundary over the distance specified</Text>
</Translation>
<Translation>
<Keyword>EmbossDirectionSurfaceNormalId</Keyword>
<Text>Surface normal</Text>
</Translation>
<Translation>
<Keyword>EmbossDirectionAverageSurfaceNormalId</Keyword>
<Text>Average surface normal</Text>
</Translation>
<Translation>
<Keyword>EmbossDirectionInsertionAxisId</Keyword>
<Text>Insertion axis</Text>
</Translation>
<Translation>
<Keyword>DirectionId</Keyword>
<Text>Direction</Text>
</Translation>
<Translation>
<Keyword>NormalSmoothingId</Keyword>
<Text>Normal smoothing</Text>
</Translation>
<Translation>
<Keyword>NormalSmoothingToolTipId</Keyword>
<Text>Strength of normal smoothing</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveAdvancedId</Keyword>
<Text>Emboss curve advanced</Text>
</Translation>
<Translation>
<Keyword>SelectEmbossCurveId</Keyword>
<Text>Click one or more end-connected curves that enclose an area of wax.</Text>
</Translation>
<Translation>
<Keyword>ClickInsideAreaToEmbossId</Keyword>
<Text>Click in the area to emboss.</Text>
</Translation>
<Translation>
<Keyword>EmbossPickCurveOperationId</Keyword>
<Text>Set the thickness, choose raise or lower, and apply to add or remove wax.</Text>
</Translation>
<Translation>
<Keyword>EmbossApplyingId</Keyword>
<Text>Modifying the model...</Text>
</Translation>
<Translation>
<Keyword>SelectPolyToolTipId</Keyword>
<Text>Select mesh area with ball</Text>
</Translation>
<Translation>
<Keyword>SelectPlaneToolToolTipId</Keyword>
<Text>Select mesh area with plane tool</Text>
</Translation>
<Translation>
<Keyword>SelectWithSeedToolTipId</Keyword>
<Text>Select mesh area with seed point</Text>
</Translation>
<Translation>
<Keyword>DeselectToolTipId</Keyword>
<Text>Remove triangles from selection</Text>
</Translation>
<Translation>
<Keyword>ClearSelectionToolTipId</Keyword>
<Text>Deselect all</Text>
</Translation>
<Translation>
<Keyword>TrimSelectModeId</Keyword>
<Text>Select polygons with the ball tool</Text>
</Translation>
<Translation>
<Keyword>TrimSelectModeNoMeshId</Keyword>
<Text>Scan mesh can only be trimmed before survey is applied.</Text>
</Translation>
<Translation>
<Keyword>ColorizeThicknessId</Keyword>
<Text>Colorize thickness:</Text>
</Translation>
<Translation>
<Keyword>RulerMessageId</Keyword>
<Text>Measure distance</Text>
</Translation>
<Translation>
<Keyword>RulerMessageToolTipId</Keyword>
<Text>Measures the distance between two points in the model</Text>
</Translation>
<Translation>
<Keyword>RulerMessageThicknessId</Keyword>
<Text>Measure thickness</Text>
</Translation>
<Translation>
<Keyword>RulerMessageThicknessToolTipId</Keyword>
<Text>Touch the location to measure</Text>
</Translation>
<Translation>
<Keyword>MinId</Keyword>
<Text>Min</Text>
</Translation>
<Translation>
<Keyword>MaxId</Keyword>
<Text>Max</Text>
</Translation>
<Translation>
<Keyword>ComputingThicknessColorsId</Keyword>
<Text>Computing thickness colors. Please wait...</Text>
</Translation>
<Translation>
<Keyword>BallSelectStartMsgId</Keyword>
<Text>Select wax with the tool</Text>
</Translation>
<Translation>
<Keyword>DeleteSelectionToolTipId</Keyword>
<Text>Delete selected wax</Text>
</Translation>
<Translation>
<Keyword>RemoveWaxMessageId</Keyword>
<Text>Removing wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>AddSelectionToBlockoutToolTipId</Keyword>
<Text>Add selection to block out wax</Text>
</Translation>
<Translation>
<Keyword>RemoveSelectionToBlockoutToolTipId</Keyword>
<Text>Remove selection from block out wax</Text>
</Translation>
<Translation>
<Keyword>FalloffId</Keyword>
<Text>Falloff</Text>
</Translation>
<Translation>
<Keyword>OpacityId</Keyword>
<Text>Opacity</Text>
</Translation>
<Translation>
<Keyword>LanguageSettingId</Keyword>
<Text>Language:</Text>
</Translation>
<Translation>
<Keyword>ApplyApronId</Keyword>
<Text>Apply apron:</Text>
</Translation>
<Translation>
<Keyword>OrId</Keyword>
<Text>Or</Text>
</Translation>
<Translation>
<Keyword>SelectPartialCadId</Keyword>
<Text>Select a PartialCad file:</Text>
</Translation>
<Translation>
<Keyword>LoadScanId</Keyword>
<Text>Load Scan</Text>
</Translation>
<Translation>
<Keyword>CloneThicknessPresetId</Keyword>
<Text>Presets:</Text>
</Translation>
<Translation>
<Keyword>CloneThickness1Id</Keyword>
<Text>Occlusal rest</Text>
</Translation>
<Translation>
<Keyword>CloneThickness1ToolTipId</Keyword>
<Text>Occlusal rest thickness (1)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness2Id</Keyword>
<Text>Lingual rest</Text>
</Translation>
<Translation>
<Keyword>CloneThickness2ToolTipId</Keyword>
<Text>Lingual rest thickness (2)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness3Id</Keyword>
<Text>Minor connector</Text>
</Translation>
<Translation>
<Keyword>CloneThickness3ToolTipId</Keyword>
<Text>Minor connector thickness (3)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness4Id</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>CloneThickness4ToolTipId</Keyword>
<Text>Major connector thickness (4)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness5Id</Keyword>
<Text>Mesh</Text>
</Translation>
<Translation>
<Keyword>CloneThickness5ToolTipId</Keyword>
<Text>Mesh thickness (5)</Text>
</Translation>
<Translation>
<Keyword>ClickToPlaceCurvePointsId</Keyword>
<Text>Click To Place Curve Points</Text>
</Translation>
<Translation>
<Keyword>DentalProjectNotValidForPartialsId</Keyword>
<Text>It is best to specify at least one Partial framework tooth.
Without this no workflow, orientation, or material specific settings will be used.
[ In the DentalDB in options select material configurations 'Partial',
then apply a Partial framework to a tooth of the jaw you want to design on. ]</Text>
</Translation>
<Translation>
<Keyword>MissingAttachmentsId</Keyword>
<Text>The following attachments could not be located and will not be loaded:
%s
</Text>
</Translation>
<Translation>
<Keyword>CurveNameId</Keyword>
<Text>Curve</Text>
</Translation>
<Translation>
<Keyword>FinishLineCurveNumberNameId</Keyword>
<Text>Finish line curve %d</Text>
</Translation>
<Translation>
<Keyword>CloneThicknessEditId</Keyword>
<Text>Thickness of wax copied by the tool (If the thickness exceeds that of the piece, the difference will form a gap.)</Text>
</Translation>
<Translation>
<Keyword>CurveEditPointMessageId</Keyword>
<Text>Click on the curve to insert an edit point or click on an edit point to delete it</Text>
</Translation>
<Translation>
<Keyword>ComputingMaskVolumeId</Keyword>
<Text>Computing mask volume</Text>
</Translation>
<Translation>
<Keyword>DetermineGpuBoundId</Keyword>
<Text>Determining Boundary</Text>
</Translation>
<Translation>
<Keyword>SettingupGpuId</Keyword>
<Text>Setting up Gpu</Text>
</Translation>
<Translation>
<Keyword>SnapMeshToTargetDepthId</Keyword>
<Text>Snap springloaded mesh to target depth</Text>
</Translation>
<Translation>
<Keyword>RelieveImportedId</Keyword>
<Text>Add Blockout relief</Text>
</Translation>
<Translation>
<Keyword>ApplyReliefToImportedId</Keyword>
<Text>Apply relief</Text>
</Translation>
<Translation>
<Keyword>ImportedReliefAMountId</Keyword>
<Text>Relief</Text>
</Translation>
<Translation>
<Keyword>EditCurveId</Keyword>
<Text>Edit Curve</Text>
</Translation>
<Translation>
<Keyword>ClickCurveToEditId</Keyword>
<Text>Click a curve to edit</Text>
</Translation>
<Translation>
<Keyword>AdvancedLoggingId</Keyword>
<Text>Detailed log messages</Text>
</Translation>
<Translation>
<Keyword>ShowLogId</Keyword>
<Text>Save Log</Text>
</Translation>
<Translation>
<Keyword>IdExitProfileEditorFirst</Keyword>
<Text>Please exit the profile editor first</Text>
</Translation>
<Translation>
<Keyword>IdInvalidBound</Keyword>
<Text>There is no valid bound</Text>
</Translation>
<Translation>
<Keyword>IdInnerContourNotWithinOuter</Keyword>
<Text>The outer contour doesn't contain the inner contour curve</Text>
</Translation>
<Translation>
<Keyword>IdInnerContourAlreadyExists</Keyword>
<Text>An outer contour curve can only have one inner countour curve</Text>
</Translation>
<Translation>
<Keyword>IdNoOuterContourForInner</Keyword>
<Text>There is no outer contour for this inner contour curve</Text>
</Translation>
<Translation>
<Keyword>FillImportedRefractoryToBottomId</Keyword>
<Text>Fill Imported Part to Bottom</Text>
</Translation>
<Translation>
<Keyword>FeaturePreviewId</Keyword>
<Text>Pre-release features</Text>
</Translation>
<Translation>
<Keyword>ResizingWorkspaceId</Keyword>
<Text>The workspace is being resized, please wait..</Text>
</Translation>
<Translation>
<Keyword>RefractoryNeedsToBeVisibleToApplyId</Keyword>
<Text>The refractory needs to be visible before you apply</Text>
</Translation>
<Translation>
<Keyword>SoftwareEULAInformation</Keyword>
<Text>By activating or using this software, you acknowledge the existence of a binding EULA,
based on which this product has been delivered and sublicensed by a distributor entitled by exocad GmbH,
and that anonymous user statistics might be collected in the software for improving the software experience.
In particular, you acknowledge that the sublicense is a „per seat“ license that is limited to one user and computer at a time.
(Note: Sending the statistics to exocad is a separate, optional step and is disabled by default)</Text>
</Translation>
<Translation>
<Keyword>AllowSendingStatisticsId</Keyword>
<Text>Permission to send statistics.</Text>
</Translation>
<Translation>
<Keyword>Permission_To_Send_Statistic_To_Development_Team_ToolTip</Keyword>
<Text>Allow sending advanced anonymous usage statistics to help the development team to fix and improve products and service.
Note: The statistics are anonymous, i.e. no patient or medical data is transfered.</Text>
</Translation>
<Translation>
<Keyword>ShowStatisticsInfoId</Keyword>
<Text>Show Info</Text>
</Translation>
<Translation>
<Keyword>SendStatisticsNowId</Keyword>
<Text>Send Now</Text>
</Translation>
<Translation>
<Keyword>StatisticsId</Keyword>
<Text>Statistics</Text>
</Translation>
<Translation>
<Keyword>InvertStippleId</Keyword>
<Text>Invert pattern</Text>
</Translation>
<Translation>
<Keyword>ApplyOverWaxId</Keyword>
<Text>Apply over wax</Text>
</Translation>
<Translation>
<Keyword>SurveyAutoReduceScanId</Keyword>
<Text>Auto reduce scan</Text>
</Translation>
<Translation>
<Keyword>SurveyAutoReduceScanToolTipId</Keyword>
<Text>A reduced scan size will improve overall performance.
However sometimes you may wish to disable if too much data is removed</Text>
</Translation>
<Translation>
<Keyword>SurveyBlockOutUndercutsToolTipId</Keyword>
<Text>Block out undercuts</Text>
</Translation>
<Translation>
<Keyword>ConnectorReliefEdgeFalloffId</Keyword>
<Text>Connector margin width</Text>
</Translation>
<Translation>
<Keyword>EnableAutoReliefId</Keyword>
<Text>Enable relief</Text>
</Translation>
<Translation>
<Keyword>SaveEditedBlockoutId</Keyword>
<Text>With edited blockout</Text>
</Translation>
<Translation>
<Keyword>EndPostId</Keyword>
<Text>End Thickness</Text>
</Translation>
<Translation>
<Keyword>UseFileId</Keyword>
<Text>Use File</Text>
</Translation>
<Translation>
<Keyword>UsePostId</Keyword>
<Text>Use Post</Text>
</Translation>
</Translations>
</TranslationContainer>
<TranslationContainer>
<Translations>
<Translation>
<Keyword>missingResoureDllID</Keyword>
<Text>Install Problem: missing resource DLL</Text>
</Translation>
<Translation>
<Keyword>ProblemWithNumericInputId</Keyword>
<Text>Problem with number</Text>
</Translation>
<Translation>
<Keyword>skipNextWizardStepsId</Keyword>
<Text>Do you wish to skip these steps?</Text>
</Translation>
<Translation>
<Keyword>skipNextWizardStepId</Keyword>
<Text>Do you wish to skip this step?</Text>
</Translation>
<Translation>
<Keyword>requiresClosedCurveId</Keyword>
<Text>%s requires a closed curve loop</Text>
</Translation>
<Translation>
<Keyword>requiresOpenCurveId</Keyword>
<Text>%s requires an open curve</Text>
</Translation>
<Translation>
<Keyword>PartialsWorkflowModifierTagId</Keyword>
<Text>PartialsWorkflowModifier tag not found in %s</Text>
</Translation>
<Translation>
<Keyword>WorkflowBeforeAfterErrorId</Keyword>
<Text>Don't use both "Before" and "After"
in RemoveWorkflowStep in %s</Text>
</Translation>
<Translation>
<Keyword>WorkflowBeforeAfterErrorInAddId</Keyword>
<Text>Don't use both "Before" and "After"
in AddWorkflowStep in %s</Text>
</Translation>
<Translation>
<Keyword>WorkflowMustSpecifyBeforeOrAfterInAddId</Keyword>
<Text>Must specify either "Before" or "After"
in AddWorkflowStep in %s</Text>
</Translation>
<Translation>
<Keyword>MissingRemoveWorkflowStepErrorId</Keyword>
<Text>RemoveWorkflowStep %s in %s was not found in wizard steps</Text>
</Translation>
<Translation>
<Keyword>AddWorkflowStepNotFound</Keyword>
<Text>AddWorkflowStep %s in %s was not found in wizard steps</Text>
</Translation>
<Translation>
<Keyword>UnableToGenerateKeyboardMappingsId</Keyword>
<Text>Unable to generate the CurrentKeyMappings html file</Text>
</Translation>
<Translation>
<Keyword>BuildPieceCouldNotBeCreatedId</Keyword>
<Text>The build piece could not be created.</Text>
</Translation>
<Translation>
<Keyword>DentallabExitFileDirtyId</Keyword>
<Text>The model for the current job has not been saved.
Do you wish to save it before exiting?</Text>
</Translation>
<Translation>
<Keyword>VirtualModelErrorId</Keyword>
<Text>The virtual model could not be created.</Text>
</Translation>
<Translation>
<Keyword>RemoveAllScanFilesId</Keyword>
<Text>Remove all scan files from this project?
(scan files from folder \"%s\" directory will also be removed)</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteDiskFullId</Keyword>
<Text>Unable to save file. Check to make sure that the directory exists,
is accessible and has space available.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadIncompleteId</Keyword>
<Text>Error reading file - file is incomplete.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadcorruptId</Keyword>
<Text>The selected file cannot be read. It may not be a valid file, it may be a corrupted file, or it may have been created in a newer version.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteId</Keyword>
<Text>Error writing file</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadBadExtensionId</Keyword>
<Text>Error reading file - bad file extension.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteBadExtensionId</Keyword>
<Text>Error writing file - bad extension.</Text>
</Translation>
<Translation>
<Keyword>LoadUndoOpErrorId</Keyword>
<Text>Unable to read history from disk. Cannot undo/redo last operation.</Text>
</Translation>
<Translation>
<Keyword>SaveUndoOpErrorId</Keyword>
<Text>Unable to save history to disk - you will not be able to undo the last operation.
Verify that you have space on your drive and that the temporary directory is present.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileReadId</Keyword>
<Text>Error reading file</Text>
</Translation>
<Translation>
<Keyword>ErrorFileSaveId</Keyword>
<Text>File not saved.
Unable to save a temporary copy of the file.
The temporary directory may be full or it may not have write permissions.</Text>
</Translation>
<Translation>
<Keyword>ErrorFileWriteTempFullId</Keyword>
<Text>Unable to save a temporary copy of the file. The temporary directory may be full or it may not exist.</Text>
</Translation>
<Translation>
<Keyword>AskToSaveId</Keyword>
<Text>The file '%s' has been modified.
Would you like to save it?</Text>
</Translation>
<Translation>
<Keyword>UnableToCreateFolderFreeformPalettesId</Keyword>
<Text>Unable to create folder for palettes in temp directory.</Text>
</Translation>
<Translation>
<Keyword>CustomToolSameNameAsStandardLoopId</Keyword>
<Text>The tool name "StandardLoop1" is already in use by one of the standard tools. Please choose another name.</Text>
</Translation>
<Translation>
<Keyword>CustomToolSameNameAsStandardAngleId</Keyword>
<Text>The tool name "StandardAngle1" is already in use by one of the standard tools. Please choose another name.</Text>
</Translation>
<Translation>
<Keyword>TooManySavedViewsId</Keyword>
<Text>You have 50 views saved. You must delete a saved view to save a new view.</Text>
</Translation>
<Translation>
<Keyword>UnexpectedErrorLoadingFileId</Keyword>
<Text>Unexpected error loading file:
"%s"</Text>
</Translation>
<Translation>
<Keyword>ResourcesFailedToLoadId</Keyword>
<Text>The main application resource file could not be found. You may need to reinstall the software.</Text>
</Translation>
<Translation>
<Keyword>RequireFullColorId</Keyword>
<Text>Full color (32 bit) mode is strongly recommended. Please adjust your display properties and restart the application.</Text>
</Translation>
<Translation>
<Keyword>InvalidParamInstallationProblemDbToPartialId</Keyword>
<Text>Installation problem
Invalid parameter matching in \"config\\dbtopartialappmap.xml\".
The parameter name \"%s\" is unknown.</Text>
</Translation>
<Translation>
<Keyword>MissingParamInstallationProblemDbToPartialId</Keyword>
<Text>Installation problem
Missing parameter linkage in \"config\\dbtopartialappmap.xml".
The parameter name \"%s\" has no partial equivalent defined.</Text>
</Translation>
<Translation>
<Keyword>PartialAndAntagonistOnSameJawId</Keyword>
<Text>Antagonist and partial denture should not both be %s.</Text>
</Translation>
<Translation>
<Keyword>InconsistentDbSettingsId</Keyword>
<Text>Job settings are inconsistent between tooth %s and %s.
Partial framework reconstructions should use the same material and parameters.
Do you wish to return to the DB to fix this?</Text>
</Translation>
<Translation>
<Keyword>MissingImportedPartFileId</Keyword>
<Text>Imported part file "%s"
specified but not found. Skipping...</Text>
</Translation>
<Translation>
<Keyword>WhatIsTypeOfThisScanFileId</Keyword>
<Text>The scan file found in the folder:
\"%s\".
Appears to be the wrong type for the project.
Do you want to manually select a scan or cancel loading this scene?</Text>
</Translation>
<Translation>
<Keyword>DoYouWantToRevertId</Keyword>
<Text>Do you want to revert to the saved '%s'?</Text>
</Translation>
<Translation>
<Keyword>ErrorNoValidGeometryId</Keyword>
<Text>Error loading file.
Either there is no valid geometry in the file for the options selected, or the file is corrupt.</Text>
</Translation>
<Translation>
<Keyword>CloneBlockoutWarningId</Keyword>
<Text>To avoid clearing the current 'Limit to depth' setting,
do you wish to automatically switch to 'Layer on refractory only' mode?</Text>
</Translation>
<Translation>
<Keyword>EmbossPreviewFailedId</Keyword>
<Text>Preview for emboss failed.
You may not have enough memory to perform the preview.</Text>
</Translation>
<Translation>
<Keyword>FixdraftErrFailureId</Keyword>
<Text>The FixDraft operation failed.</Text>
</Translation>
<Translation>
<Keyword>FixDraftErrBadInputsId</Keyword>
<Text>The FixDraft operation failed because one or more of the input parameters were invalid.
Please verify the inputs and repeat the operation.</Text>
</Translation>
<Translation>
<Keyword>FixdraftErrGrowWorkspaceFailedId</Keyword>
<Text>The FixDraft operation failed because the requested draft angle may cause the model to grow to a size that would exceed available memory.
Please reduce the draft angle or modify the draft mode.</Text>
</Translation>
<Translation>
<Keyword>FixdraftErrTempVolAllocFailedId</Keyword>
<Text>Insufficient memory available to perform the FixDraft operation.</Text>
</Translation>
<Translation>
<Keyword>UnableToLoadImageFileId</Keyword>
<Text>Unable to load image file</Text>
</Translation>
<Translation>
<Keyword>NurbsCurveCreateErrorId</Keyword>
<Text>The curve was not placed. The points may be too far apart for the curve to fit properly.</Text>
</Translation>
<Translation>
<Keyword>NonCurveLoopSelectedId</Keyword>
<Text>The selected curves don't form a closed loop.</Text>
</Translation>
<Translation>
<Keyword>YellowZoneWorkspaceId</Keyword>
<Text>This operation may require more memory than your computer has.
If you proceed, save your work often since exceeding memory may lead to unpredictable problems.</Text>
</Translation>
<Translation>
<Keyword>RedZoneWorkspaceId</Keyword>
<Text>This workspace requires too much memory.</Text>
</Translation>
<Translation>
<Keyword>UnableToCreatNewDocId</Keyword>
<Text>Unable to create a new document.</Text>
</Translation>
<Translation>
<Keyword>ZeroOrLessWorkspaceId</Keyword>
<Text>Negative values or zero are not a valid choice for width, height, depth, diameter, or edge sharpness.</Text>
</Translation>
<Translation>
<Keyword>ResampleReallyDownsampleId</Keyword>
<Text>Changing to this coarser wax setting will cause a loss of detail.
Are you sure you want to proceed?</Text>
</Translation>
<Translation>
<Keyword>ResizeWorkspaceEmptyWsMinimizeId</Keyword>
<Text>An empty work area cannot be minimized.</Text>
</Translation>
<Translation>
<Keyword>EdgeSharpnessId</Keyword>
<Text>Wax resolution is too high.</Text>
</Translation>
<Translation>
<Keyword>OpenFileMemoryWarningId</Keyword>
<Text>This model requires more memory than your computer has. If you proceed, save your work often since exceeding memory will lead to unpredictable problems.
Would you like to proceed?</Text>
</Translation>
<Translation>
<Keyword>MultipleFileFormatOnlyStlId</Keyword>
<Text>Multiple file import is only supported for STL files.</Text>
</Translation>
<Translation>
<Keyword>UnknownFileTypeId</Keyword>
<Text>Unknown file type</Text>
</Translation>
<Translation>
<Keyword>ProfileNotFoundId</Keyword>
<Text>The profile: "%s"
could not be found.
</Text>
</Translation>
<Translation>
<Keyword>BadProfileId</Keyword>
<Text>This profile is invalid.
The outline must be a closed curve.</Text>
</Translation>
<Translation>
<Keyword>BadProfileXId</Keyword>
<Text>This profile is invalid.
The outline is missing the horizontal line at the bottom.</Text>
</Translation>
<Translation>
<Keyword>BadProfileFillId</Keyword>
<Text>The profile could not be applied with the current settings.</Text>
</Translation>
<Translation>
<Keyword>BadProfileEndcapsId</Keyword>
<Text>The profile endcaps could not be applied with the current settings.</Text>
</Translation>
<Translation>
<Keyword>UnfitCurveId</Keyword>
<Text>The selected curve could not be used.
Curves must be fit to the surface.</Text>
</Translation>
<Translation>
<Keyword>ShapeErrorFailedToCreatePatchId</Keyword>
<Text>The wax may be too bumpy to shape or the boundary curves may be too irregular to enclose an area of wax.
Use the option to fit sections to boundaries only or edit the boundary curves.</Text>
</Translation>
<Translation>
<Keyword>FillerApplyFailedId</Keyword>
<Text>Failed to commit the filler surface to the wax.</Text>
</Translation>
<Translation>
<Keyword>GpuSetupErrorId</Keyword>
<Text>There was a problem with the graphics hardware acceleration initialization.</Text>
</Translation>
<Translation>
<Keyword>GpuBoundsErrorId</Keyword>
<Text>There was a problem with the bounds setup for the graphics hardware acceleration initialization.</Text>
</Translation>
<Translation>
<Keyword>GpuNotEnabledId</Keyword>
<Text>Hardware acceleration must be enabled to use this feature.</Text>
</Translation>
<Translation>
<Keyword>GpuMemErrorId</Keyword>
<Text>The use of hardware acceleration with this model exceeds the memory limits of the graphics card.</Text>
</Translation>
<Translation>
<Keyword>BadMeshId</Keyword>
<Text>The chosen pattern could not be used.</Text>
</Translation>
<Translation>
<Keyword>OutlineCurvesNotJoinedAtEndpointsId</Keyword>
<Text>The connector outline curves are not joined at the end points.</Text>
</Translation>
<Translation>
<Keyword>NoMajorConnectorCurveFoundId</Keyword>
<Text>No major connector curve found.</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorSelectCurvesId</Keyword>
<Text>First, select the outer curve loop defining the wax area, then, if desired, an inner curve loop to create a hole.</Text>
</Translation>
<Translation>
<Keyword>ConnectorAreaNotEmbossedId</Keyword>
<Text>The connector area could not be embossed.</Text>
</Translation>
<Translation>
<Keyword>ConnectorHoleCurvesNotJoinedId</Keyword>
<Text>The connector hole curves are not joined at the end points.</Text>
</Translation>
<Translation>
<Keyword>ConnectorHoleNotCreatedId</Keyword>
<Text>The connector hole could not be created.</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewFailedId</Keyword>
<Text>The preview could not be created for the selected mesh areas.</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewErrorId</Keyword>
<Text>The preview could not be created for all the selected mesh areas.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserApplyFailedId</Keyword>
<Text>The wax could not be created.</Text>
</Translation>
<Translation>
<Keyword>FalloffApplyFailedId</Keyword>
<Text>The connector edge falloff could not be applied due to overlapping curve regions.
This can be avoided by applying each overlapping region sequentially rather than simultaneously.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserErrorSnipFailedId</Keyword>
<Text>The mesh preview could not be generated.</Text>
</Translation>
<Translation>
<Keyword>DirtyProfileWarningLockedId</Keyword>
<Text>The current profile has been modified.
This is a locked standard profile.
If you wish to save the changes, press 'Save as'.
Do you wish to discard the changes?</Text>
</Translation>
<Translation>
<Keyword>DirtyProfileWarningId</Keyword>
<Text>The current profile has been modified, but not saved.
Do you wish to return to the 'Edit profile' screen to save your changes?</Text>
</Translation>
<Translation>
<Keyword>DeleteProfileWarningId</Keyword>
<Text>Are you sure you want to delete this custom profile?</Text>
</Translation>
<Translation>
<Keyword>DeleteProfileErrorId</Keyword>
<Text>Error deleting profile</Text>
</Translation>
<Translation>
<Keyword>BarFailedGenericId</Keyword>
<Text>The current profile orientation choice doesn't work with the selected curve.</Text>
</Translation>
<Translation>
<Keyword>BadProfileCenterId</Keyword>
<Text>This profile is invalid.
The outline does not contain the plane center.</Text>
</Translation>
<Translation>
<Keyword>SelectSketchPlaneId</Keyword>
<Text>Please use a closed loop profile.</Text>
</Translation>
<Translation>
<Keyword>SurveyColorUndercutErrorId</Keyword>
<Text>Failed to generate the undercut coloring.</Text>
</Translation>
<Translation>
<Keyword>SurveyApplyWarningId</Keyword>
<Text>Do you wish to apply the 'Survey tool' now?</Text>
</Translation>
<Translation>
<Keyword>SurveyNoMeshFoundId</Keyword>
<Text>Can't find an input mesh for survey.</Text>
</Translation>
<Translation>
<Keyword>SurveyBlockoutErrorId</Keyword>
<Text>Failed to generate refractory model and blockout wax.</Text>
</Translation>
<Translation>
<Keyword>SurveyFinishErrorId</Keyword>
<Text>Failed to complete surveying of the blocked out model.</Text>
</Translation>
<Translation>
<Keyword>ConstrainedTugNotOnSurfaceId</Keyword>
<Text>The selected curves do not lie near the surface of the wax.
Please fit the curves to the wax.</Text>
</Translation>
<Translation>
<Keyword>ConstrainedTugPendingId</Keyword>
<Text>Clear or apply the existing tug.</Text>
</Translation>
<Translation>
<Keyword>ConstrainedTugSplitFailedId</Keyword>
<Text>The selected curve loop may be too small for this operation. Try clicking farther from the edge of the curve.
If this does not work, make the curve loop bigger or increase the wax coarseness of the piece.</Text>
</Translation>
<Translation>
<Keyword>FloatingPointOnFitCurveWarningId</Keyword>
<Text>Floating a curve point on a 'fit to surface' curve.
This will produce an unexpected result.</Text>
</Translation>
<Translation>
<Keyword>ApplyPostToolId</Keyword>
<Text>Do you wish to apply the 'Post tool' now?</Text>
</Translation>
<Translation>
<Keyword>CantFindRegisteredToolId</Keyword>
<Text>Can't find registered tool %s.</Text>
</Translation>
<Translation>
<Keyword>CouldNotFillToPlaneId</Keyword>
<Text>Could not fill to plane.</Text>
</Translation>
<Translation>
<Keyword>NoBitmapToSaveId</Keyword>
<Text>No bitmap image attached.
File save cancelled.</Text>
</Translation>
<Translation>
<Keyword>CantSaveBitmapWithZeroDimensionId</Keyword>
<Text>Bitmap has zero width and/or zero height.
File save cancelled.</Text>
</Translation>
<Translation>
<Keyword>UnsupportedBitmapSaveOperationId</Keyword>
<Text>Unsupported operation saving this bitmap.
Save has been canceled</Text>
</Translation>
<Translation>
<Keyword>CantOpenBitmapForWriteId</Keyword>
<Text>Error opening bitmap file for write.
File save cancelled.</Text>
</Translation>
<Translation>
<Keyword>ApplyClaspNowId</Keyword>
<Text>Do you wish to apply the 'Clasp tool' now?</Text>
</Translation>
<Translation>
<Keyword>ApplyFinishlineNowId</Keyword>
<Text>Do you wish to apply the 'Finish line tool' now?</Text>
</Translation>
<Translation>
<Keyword>ModelTooLargeForGPUId</Keyword>
<Text>This model is too large to be processed in GPU.
Currently there is %dMb of GPU memory in use.
You can improve this by closing or reducing the window size of any other 3D applications.</Text>
</Translation>
<Translation>
<Keyword>IgnoringUnfitCurvesId</Keyword>
<Text>There are curve loops present that do not fit to the surface.
These will be ignored by this tool.</Text>
</Translation>
<Translation>
<Keyword>ApplyMajorConnectorNowId</Keyword>
<Text>Do you wish to apply the 'Major connector tool' now?</Text>
</Translation>
<Translation>
<Keyword>NeedToPreviewAndAPplyMeshConnectorId</Keyword>
<Text>You still need to preview and apply the 'Mesh connector tool'.
Would you like to do that now?</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshConnectorNowId</Keyword>
<Text>Do you wish to apply the 'Mesh connector tool' now?</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshRiserToolNowId</Keyword>
<Text>Do you wish to apply the 'Mesh riser tool' now?</Text>
</Translation>
<Translation>
<Keyword>GpuVolumeNotFoundId</Keyword>
<Text>GPU volume not found</Text>
</Translation>
<Translation>
<Keyword>ApplyBarToolId</Keyword>
<Text>Do you wish to apply the 'Bar tool' now?</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildNowId</Keyword>
<Text>Do you wish to save for build now?</Text>
</Translation>
<Translation>
<Keyword>ApplyPipeNowId</Keyword>
<Text>Do you wish to apply the 'Pipe tool' now?</Text>
</Translation>
<Translation>
<Keyword>FinishInProgressCurveId</Keyword>
<Text>Please finish the current curve first.</Text>
</Translation>
<Translation>
<Keyword>CantUndoId</Keyword>
<Text>Can't undo.</Text>
</Translation>
<Translation>
<Keyword>SaveDisabledDuringBlockoutId</Keyword>
<Text>Due to special scene state:
Saving disabled in 'Edit blockout'.
Please leave this tool before saving.
</Text>
</Translation>
<Translation>
<Keyword>CouldNotFindRefractoryId</Keyword>
<Text>Error: Could not find refactory.</Text>
</Translation>
<Translation>
<Keyword>FileHasChangedSaveItFirstId</Keyword>
<Text>The current file has changed.
Do you want to save it first?</Text>
</Translation>
<Translation>
<Keyword>MeshCurvesNotDeletingScaneDisabledId</Keyword>
<Text>This project has partial mesh curves: Deleting of scan meshes disabled.</Text>
</Translation>
<Translation>
<Keyword>MajorConnectoraNotDeletingScaneDisabledId</Keyword>
<Text>This project has major connector curves: Deleting of scan meshes disabled.</Text>
</Translation>
<Translation>
<Keyword>WaxDataNotDeletingScaneDisabledId</Keyword>
<Text>This project has wax data: Deleting of scan meshes disabled.</Text>
</Translation>
<Translation>
<Keyword>NoScanMeshId</Keyword>
<Text>Did not find any scan meshes in the scene.</Text>
</Translation>
<Translation>
<Keyword>ProblemExportingId</Keyword>
<Text>There was a problem with exporting.</Text>
</Translation>
<Translation>
<Keyword>NoSceneFoudErrorId</Keyword>
<Text>No scene found.</Text>
</Translation>
<Translation>
<Keyword>DuplicateContextNameErrorId</Keyword>
<Text>Duplicate context installation error:
%s</Text>
</Translation>
<Translation>
<Keyword>WorkOnUpperOrLowerId</Keyword>
<Text>This case has a partial in the lower and the upper jaw.
Which one you want to work on?</Text>
</Translation>
<Translation>
<Keyword>AntagonistErrorId</Keyword>
<Text>Error: Antagonist teeth found on both jaws.</Text>
</Translation>
<Translation>
<Keyword>UnregisteredScanWarningId</Keyword>
<Text>Warning!
The scan file needs to be registered.
Please load the project in the main exocad app to register.</Text>
</Translation>
<Translation>
<Keyword>FailedToCopyAntagonistFileId</Keyword>
<Text>Failed to copy antagonist file.</Text>
</Translation>
<Translation>
<Keyword>FailedToCopyTextureFileId</Keyword>
<Text>Failed to copy texture file.</Text>
</Translation>
<Translation>
<Keyword>FoundUnregisteredAntagonistId</Keyword>
<Text>Warning!
The antagonist needs to be registered.
Please load the project in the main exocad app to register.</Text>
</Translation>
<Translation>
<Keyword>ConvertWaterTightToMillingWarningId</Keyword>
<Text>Converting parts to 3D printing that were optimized for milling may reduce accuracy.
Are you sure you want to do this?</Text>
</Translation>
<Translation>
<Keyword>ConvertWaterTightToMillingChangeProjectWarningId</Keyword>
<Text>Note: With these imported parts/settings, the output file may not be suitable for 3D printing.
Change production mode to milling?
</Text>
</Translation>
<Translation>
<Keyword>ApplyImportedPartsNowId</Keyword>
<Text>Do you wish to apply the parts now?</Text>
</Translation>
<Translation>
<Keyword>NeedSurveyBeforeImportedPartsId</Keyword>
<Text>Please complete the survey step before adding imported parts.</Text>
</Translation>
<Translation>
<Keyword>ChangeProjectToOptimizedForMillingId</Keyword>
<Text> Note: This imported part was optimized for milling, yet this project is optimized for watertightness.
Would you like to change the project optimization to milling?</Text>
</Translation>
<Translation>
<Keyword>TheInnerObjectAlreadyExistsId</Keyword>
<Text>The inner object "%s" already exists.
If you want to convert it to refractory,
make sure it is active and press "Convert to wax".</Text>
</Translation>
<Translation>
<Keyword>NoInnerTrianglesFoundId</Keyword>
<Text>No inner triangles found.
No inner object could be created.
This option only works on exocad generated files.</Text>
</Translation>
<Translation>
<Keyword>CurveEditErrorId</Keyword>
<Text>The curve(s) could not be fitted to the object.
Either the object was deleted, made invisible,
or its surface was too far away.
</Text>
</Translation>
<Translation>
<Keyword>CurveFitFailureId</Keyword>
<Text>Curve fitting failed, please try again using more control points to place the curve closer to the surface.</Text>
</Translation>
<Translation>
<Keyword>CurveReplaceModeUsageId</Keyword>
<Text>When replacing a curve segment, start and end the segment with a single click on an existing curve.</Text>
</Translation>
<Translation>
<Keyword>OKId</Keyword>
<Text>OK</Text>
</Translation>
<Translation>
<Keyword>CancelId</Keyword>
<Text>Cancel</Text>
</Translation>
<Translation>
<Keyword>YesId</Keyword>
<Text>Yes</Text>
</Translation>
<Translation>
<Keyword>NoId</Keyword>
<Text>No</Text>
</Translation>
<Translation>
<Keyword>RetryId</Keyword>
<Text>Retry</Text>
</Translation>
<Translation>
<Keyword>AbortId</Keyword>
<Text>Abort</Text>
</Translation>
<Translation>
<Keyword>UpperId</Keyword>
<Text>Upper</Text>
</Translation>
<Translation>
<Keyword>LowerId</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>SurveyTooltipId</Keyword>
<Text>Survey</Text>
</Translation>
<Translation>
<Keyword>SurveyDescriptionId</Keyword>
<Text>Generate refractory model from scanned mesh and block out undercuts.</Text>
</Translation>
<Translation>
<Keyword>SmoothFeatureTooltipId</Keyword>
<Text>Edit wax</Text>
</Translation>
<Translation>
<Keyword>SmoothFeatureDescriptionId</Keyword>
<Text>Smooth and smudge wax</Text>
</Translation>
<Translation>
<Keyword>MeshConnectorTooltipId</Keyword>
<Text>Mesh connector</Text>
</Translation>
<Translation>
<Keyword>MeshConnectorDescriptionId</Keyword>
<Text>Apply mesh and major connector</Text>
</Translation>
<Translation>
<Keyword>SmoothAreaTooltipId</Keyword>
<Text>Smooth area</Text>
</Translation>
<Translation>
<Keyword>SmoothAreaDescriptionId</Keyword>
<Text>Smooth an area or the entire model</Text>
</Translation>
<Translation>
<Keyword>SmudgeBlockoutTooltipId</Keyword>
<Text>Edit blockout</Text>
</Translation>
<Translation>
<Keyword>SmudgeBlockoutDescriptionId</Keyword>
<Text>Push or pull (shift) wax with a ball tool</Text>
</Translation>
<Translation>
<Keyword>TugTooltipId</Keyword>
<Text>Tug</Text>
</Translation>
<Translation>
<Keyword>TugDescriptionId</Keyword>
<Text>Modify wax by tugging an area</Text>
</Translation>
<Translation>
<Keyword>PipeTooltipId</Keyword>
<Text>Pipe</Text>
</Translation>
<Translation>
<Keyword>PipeDescriptionId</Keyword>
<Text>Create a pipe along one or more curves</Text>
</Translation>
<Translation>
<Keyword>EmbossWithCurveTooltipId</Keyword>
<Text>Emboss with curve</Text>
</Translation>
<Translation>
<Keyword>EmbossWithCurveDescriptionId</Keyword>
<Text>Raise or lower wax enclosed by a curve</Text>
</Translation>
<Translation>
<Keyword>RetentionBeadTooltipId</Keyword>
<Text>Retention beads</Text>
</Translation>
<Translation>
<Keyword>RetentionBeadDescriptionId</Keyword>
<Text>Add retention beads on a surface area bounded by a curve</Text>
</Translation>
<Translation>
<Keyword>AddPostTooltipId</Keyword>
<Text>Add post</Text>
</Translation>
<Translation>
<Keyword>AddPostDescriptionId</Keyword>
<Text>Add post to the model</Text>
</Translation>
<Translation>
<Keyword>FixDraftSelectionTooltipId</Keyword>
<Text>Secondary blockout</Text>
</Translation>
<Translation>
<Keyword>FixDraftSelectionDescriptionId</Keyword>
<Text>Add wax in the selected area with a specified blockout angle</Text>
</Translation>
<Translation>
<Keyword>BarTooltipId</Keyword>
<Text>Bar</Text>
</Translation>
<Translation>
<Keyword>BarDescriptionId</Keyword>
<Text>Add wax by sweeping a profile along a curve</Text>
</Translation>
<Translation>
<Keyword>FillerTooltipId</Keyword>
<Text>Filler</Text>
</Translation>
<Translation>
<Keyword>FillerDescriptionId</Keyword>
<Text>Fills area inside a curve loop with wax</Text>
</Translation>
<Translation>
<Keyword>PaintFillerTooltipId</Keyword>
<Text>Paint filler</Text>
</Translation>
<Translation>
<Keyword>PaintFillerDescriptionId</Keyword>
<Text>Fills a paint-selected area with wax</Text>
</Translation>
<Translation>
<Keyword>EmbossAreaTooltipId</Keyword>
<Text>Emboss with image or text</Text>
</Translation>
<Translation>
<Keyword>EmbossAreaDescriptionId</Keyword>
<Text>Raise or lower wax with a projected image</Text>
</Translation>
<Translation>
<Keyword>CloneTooltipId</Keyword>
<Text>Clone</Text>
</Translation>
<Translation>
<Keyword>CloneDescriptionId</Keyword>
<Text>Add wax with constant thickness by tracing mouse on the surface</Text>
</Translation>
<Translation>
<Keyword>ClaspTooltipId</Keyword>
<Text>Clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspDescriptionId</Keyword>
<Text>Apply clasp</Text>
</Translation>
<Translation>
<Keyword>MeshRiserTooltipId</Keyword>
<Text>Mesh</Text>
</Translation>
<Translation>
<Keyword>MeshRiserDescriptionId</Keyword>
<Text>Wrap a mesh pattern with a spacer underneath</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorTooltipId</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorDescriptionId</Keyword>
<Text>Create a connector based on a curve boundary loop</Text>
</Translation>
<Translation>
<Keyword>WaxPonticsTooltipId</Keyword>
<Text>Add parts</Text>
</Translation>
<Translation>
<Keyword>WaxPonticsDescriptionId</Keyword>
<Text>Add parts to the partial</Text>
</Translation>
<Translation>
<Keyword>FinishLineTooltipId</Keyword>
<Text>Finish line</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildTooltipId</Keyword>
<Text>Prepare for build</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildDescriptionId</Keyword>
<Text>Convert wax to STL for build</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorTooltipId</Keyword>
<Text>Minor connector</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorDescriptionId</Keyword>
<Text>Connect clasps to major connector</Text>
</Translation>
<Translation>
<Keyword>DrawExoCurveTooltipId</Keyword>
<Text>Curve</Text>
</Translation>
<Translation>
<Keyword>DrawExoCurveDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>SelectClayWithBallTooltipId</Keyword>
<Text>Select wax</Text>
</Translation>
<Translation>
<Keyword>SelectClayWithBallDescriptionId</Keyword>
<Text>Select wax with ball</Text>
</Translation>
<Translation>
<Keyword>MaskTooltipId</Keyword>
<Text>Mask</Text>
</Translation>
<Translation>
<Keyword>MaskDescriptionId</Keyword>
<Text>Mask wax with falloff</Text>
</Translation>
<Translation>
<Keyword>MeasureWaxTooltipId</Keyword>
<Text>Measure wax</Text>
</Translation>
<Translation>
<Keyword>MeasureWaxDescriptionId</Keyword>
<Text>Measure distance and thickness of wax</Text>
</Translation>
<Translation>
<Keyword>TrimScanTooltipId</Keyword>
<Text>Trim scan</Text>
</Translation>
<Translation>
<Keyword>TrimScanDescriptionId</Keyword>
<Text>Trim scan</Text>
</Translation>
<Translation>
<Keyword>ExpertPaletteCaptionId</Keyword>
<Text>Expert</Text>
</Translation>
<Translation>
<Keyword>UtilityPaletteCaptionId</Keyword>
<Text>Utilities</Text>
</Translation>
<Translation>
<Keyword>BasicPaletteCaptionId</Keyword>
<Text>Basic</Text>
</Translation>
<Translation>
<Keyword>DrawBarandMeshNameId</Keyword>
<Text>Draw bar and mesh</Text>
</Translation>
<Translation>
<Keyword>DrawBarandMeshDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshNameId</Keyword>
<Text>Apply mesh</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshDescriptionId</Keyword>
<Text>Draw outline for mesh, adjust settings, and apply</Text>
</Translation>
<Translation>
<Keyword>ApplyBarNameId</Keyword>
<Text>Apply bar</Text>
</Translation>
<Translation>
<Keyword>ApplyBarDescriptionId</Keyword>
<Text>Select curve, adjust settings, then apply</Text>
</Translation>
<Translation>
<Keyword>ApplyApronNameId</Keyword>
<Text>Apply apron</Text>
</Translation>
<Translation>
<Keyword>ApplyApronDescriptionId</Keyword>
<Text>Select curve, adjust settings, then apply</Text>
</Translation>
<Translation>
<Keyword>DrawApronNameId</Keyword>
<Text>Draw apron</Text>
</Translation>
<Translation>
<Keyword>DrawApronDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorNameId</Keyword>
<Text>Draw connector</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyFlexiConnectorNameId</Keyword>
<Text>Apply flexi connector</Text>
</Translation>
<Translation>
<Keyword>ApplyFlexiConnectorDescriptionId</Keyword>
<Text>Select curve, adjust settings, then apply</Text>
</Translation>
<Translation>
<Keyword>DrawIndentationAreaNameId</Keyword>
<Text>Draw indentation areas for teeth</Text>
</Translation>
<Translation>
<Keyword>DrawIndentationAreaDescriptionId</Keyword>
<Text>Make a curve by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyIndentationNameId</Keyword>
<Text>Apply indentation</Text>
</Translation>
<Translation>
<Keyword>ApplyIndentationDescriptionId</Keyword>
<Text>Make indentation for teeth</Text>
</Translation>
<Translation>
<Keyword>DrawSupportBarsNameId</Keyword>
<Text>Draw support bars</Text>
</Translation>
<Translation>
<Keyword>DrawSupportBarsDescriptionId</Keyword>
<Text>Draw support bar across arch with unfit curves</Text>
</Translation>
<Translation>
<Keyword>ApplySupportBarsNameId</Keyword>
<Text>Apply support bars</Text>
</Translation>
<Translation>
<Keyword>ApplySupportBarsDescriptionId</Keyword>
<Text>Select curves and apply support bars</Text>
</Translation>
<Translation>
<Keyword>AddPartNameId</Keyword>
<Text>Add part</Text>
</Translation>
<Translation>
<Keyword>AddPartDescriptionId</Keyword>
<Text>Add parts to model</Text>
</Translation>
<Translation>
<Keyword>SurveyModelNameId</Keyword>
<Text>Survey model</Text>
</Translation>
<Translation>
<Keyword>SurveyModelDescriptionId</Keyword>
<Text>Set insertion path, then apply to blockout model</Text>
</Translation>
<Translation>
<Keyword>EditBlockoutNameId</Keyword>
<Text>Edit blockout</Text>
</Translation>
<Translation>
<Keyword>EditBlockoutDescriptionId</Keyword>
<Text>Expose undercuts in blockout, then add extra relief wax</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorandMeshNameId</Keyword>
<Text>Draw connector and mesh</Text>
</Translation>
<Translation>
<Keyword>DrawConnectorandMeshDescriptionId</Keyword>
<Text>Draw major connector and mesh curves by clicking points on model</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshConnectorNameId</Keyword>
<Text>Apply mesh connector</Text>
</Translation>
<Translation>
<Keyword>ApplyMeshConnectorDescriptionId</Keyword>
<Text>Preview mesh, then adjust and apply</Text>
</Translation>
<Translation>
<Keyword>DrawClaspsNameId</Keyword>
<Text>Draw clasps</Text>
</Translation>
<Translation>
<Keyword>DrawClaspsDescriptionId</Keyword>
<Text>Draw clasp curves by clicking points on the model</Text>
</Translation>
<Translation>
<Keyword>ApplyClaspNameId</Keyword>
<Text>Apply clasp</Text>
</Translation>
<Translation>
<Keyword>ApplyClaspDescriptionId</Keyword>
<Text>Apply clasps: Select curve, adjust, and apply</Text>
</Translation>
<Translation>
<Keyword>FillInWaxNameId</Keyword>
<Text>Fill in wax (clone)</Text>
</Translation>
<Translation>
<Keyword>FillInWaxDescriptionId</Keyword>
<Text>Fill in and create rest seats, around mesh, distal minor connector</Text>
</Translation>
<Translation>
<Keyword>DrawFinishLineNameId</Keyword>
<Text>Draw finish line</Text>
</Translation>
<Translation>
<Keyword>DrawFinishLineDescriptionId</Keyword>
<Text>Create curve by clicking on the wax</Text>
</Translation>
<Translation>
<Keyword>FinishLineNameId</Keyword>
<Text>Finish line</Text>
</Translation>
<Translation>
<Keyword>FinishLineDescriptionId</Keyword>
<Text>Create finish line: Select curve, adjust, and apply</Text>
</Translation>
<Translation>
<Keyword>EditWaxNameId</Keyword>
<Text>Edit wax</Text>
</Translation>
<Translation>
<Keyword>EditWaxDescriptionId</Keyword>
<Text>Clean up the wax</Text>
</Translation>
<Translation>
<Keyword>BuildNameId</Keyword>
<Text>Build</Text>
</Translation>
<Translation>
<Keyword>BuildDescriptionId</Keyword>
<Text>Create STL file for export</Text>
</Translation>
<Translation>
<Keyword>HelpMenuId</Keyword>
<Text>Help</Text>
</Translation>
<Translation>
<Keyword>LoadProjectMenuId</Keyword>
<Text>Load project</Text>
</Translation>
<Translation>
<Keyword>LoadSceneMenuId</Keyword>
<Text>Load scene</Text>
</Translation>
<Translation>
<Keyword>LoadJawMenuId</Keyword>
<Text>Load jaw</Text>
</Translation>
<Translation>
<Keyword>SettingsMenuId</Keyword>
<Text>Settings</Text>
</Translation>
<Translation>
<Keyword>GPUMenuId</Keyword>
<Text>GPU</Text>
</Translation>
<Translation>
<Keyword>AboutMenuId</Keyword>
<Text>About</Text>
</Translation>
<Translation>
<Keyword>SaveMenuId</Keyword>
<Text>Save</Text>
</Translation>
<Translation>
<Keyword>SaveAsMenuId</Keyword>
<Text>Save as</Text>
</Translation>
<Translation>
<Keyword>ShowHideGroupsMenuId</Keyword>
<Text>Show/hide groups</Text>
</Translation>
<Translation>
<Keyword>ShowHideScanColorsMenuId</Keyword>
<Text>Show/hide scan colors</Text>
</Translation>
<Translation>
<Keyword>SaveDraftedRefractoryMenuId</Keyword>
<Text>Save drafted refractory</Text>
</Translation>
<Translation>
<Keyword>SaveDraftedRefractoryWithBlockoutMenuId</Keyword>
<Text>Save drafted refractory with blockout</Text>
</Translation>
<Translation>
<Keyword>FDITwoDigitId</Keyword>
<Text>FDITwoDigit</Text>
</Translation>
<Translation>
<Keyword>UniversalNumberingSystemId</Keyword>
<Text>UniversalNumberingSystem</Text>
</Translation>
<Translation>
<Keyword>PalmerId</Keyword>
<Text>Palmer</Text>
</Translation>
<Translation>
<Keyword>SceneFileAlreadyExistsId</Keyword>
<Text>There is already a scene file "%s"
in the project directory.</Text>
</Translation>
<Translation>
<Keyword>SettingsDialogTitleId</Keyword>
<Text>Settings (may require relaunch to take effect)</Text>
</Translation>
<Translation>
<Keyword>ToothNumberingSystemId</Keyword>
<Text>Tooth Numbering System:</Text>
</Translation>
<Translation>
<Keyword>OpenUserPrefencesFileId</Keyword>
<Text>Open user preferences file</Text>
</Translation>
<Translation>
<Keyword>AdvancedRenderingId</Keyword>
<Text>Advanced rendering</Text>
</Translation>
<Translation>
<Keyword>JawTypeUpperId</Keyword>
<Text>Upper</Text>
</Translation>
<Translation>
<Keyword>JawTypeLowerId</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>ScanTypeIsId</Keyword>
<Text>Scan is:</Text>
</Translation>
<Translation>
<Keyword>WorkflowContainsId</Keyword>
<Text>Workflow contains:</Text>
</Translation>
<Translation>
<Keyword>FlexibleId</Keyword>
<Text>Flexible</Text>
</Translation>
<Translation>
<Keyword>ImportedPartsId</Keyword>
<Text>Imported parts</Text>
</Translation>
<Translation>
<Keyword>NoSupportBarId</Keyword>
<Text>No support bar</Text>
</Translation>
<Translation>
<Keyword>AddApronId</Keyword>
<Text>Add apron</Text>
</Translation>
<Translation>
<Keyword>AntagonistsId</Keyword>
<Text>Antagonists</Text>
</Translation>
<Translation>
<Keyword>JawScansId</Keyword>
<Text>Jaw scans</Text>
</Translation>
<Translation>
<Keyword>AllOtherPartsId</Keyword>
<Text>All other parts</Text>
</Translation>
<Translation>
<Keyword>AntagonistId</Keyword>
<Text>Antagonist</Text>
</Translation>
<Translation>
<Keyword>JawScanId</Keyword>
<Text>Jaw scan</Text>
</Translation>
<Translation>
<Keyword>OtherPartId</Keyword>
<Text>Other part</Text>
</Translation>
<Translation>
<Keyword>ErrorId</Keyword>
<Text>Error</Text>
</Translation>
<Translation>
<Keyword>ShowHideGroupId</Keyword>
<Text>SHOW/HIDE</Text>
</Translation>
<Translation>
<Keyword>PartialGroupId</Keyword>
<Text>PARTIAL</Text>
</Translation>
<Translation>
<Keyword>HiddenGroupId</Keyword>
<Text>HIDDEN</Text>
</Translation>
<Translation>
<Keyword>ShowAllButtonId</Keyword>
<Text>Show all</Text>
</Translation>
<Translation>
<Keyword>WaxNameId</Keyword>
<Text>Wax</Text>
</Translation>
<Translation>
<Keyword>RefractoryNameId</Keyword>
<Text>Refractory</Text>
</Translation>
<Translation>
<Keyword>BlockoutNameId</Keyword>
<Text>Blockout</Text>
</Translation>
<Translation>
<Keyword>BuildNumberedNameId</Keyword>
<Text>Build part %d</Text>
</Translation>
<Translation>
<Keyword>ScanNameId</Keyword>
<Text>Scan</Text>
</Translation>
<Translation>
<Keyword>AntagonistNameId</Keyword>
<Text>Antagonist</Text>
</Translation>
<Translation>
<Keyword>ImportedPartId</Keyword>
<Text>Imported part</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorCurveNameId</Keyword>
<Text>Major connector</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorCurveNumberedNameId</Keyword>
<Text>Major connector curve %d</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorHoleCurveNameId</Keyword>
<Text>Major connector hole</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorHoleCurveNumberedNameId</Keyword>
<Text>Major connector hole curve %d</Text>
</Translation>
<Translation>
<Keyword>MeshRiserCurveNameId</Keyword>
<Text>Mesh riser</Text>
</Translation>
<Translation>
<Keyword>MeshRiserCurveNumberedNameId</Keyword>
<Text>Mesh riser curve %d</Text>
</Translation>
<Translation>
<Keyword>MeshRiserHoleCurveNameId</Keyword>
<Text>Mesh riser hole</Text>
</Translation>
<Translation>
<Keyword>MeshRiserHoleCurveNumberedNameId</Keyword>
<Text>Mesh riser hole curve %d</Text>
</Translation>
<Translation>
<Keyword>MeshRiserTissueSupportCurveNameId</Keyword>
<Text>Tissue support</Text>
</Translation>
<Translation>
<Keyword>MeshRiserTissueSupportCurveNumberedNameId</Keyword>
<Text>Tissue support curve %d</Text>
</Translation>
<Translation>
<Keyword>ClaspCurveNameId</Keyword>
<Text>Clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspCurveNumberedNameId</Keyword>
<Text>Clasp curve %d</Text>
</Translation>
<Translation>
<Keyword>FinishLineCurveNameId</Keyword>
<Text>Finish line</Text>
</Translation>
<Translation>
<Keyword>FinishLineCurveNumberedNameId</Keyword>
<Text>Finish line curve %d</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorCurveNameId</Keyword>
<Text>Minor connector</Text>
</Translation>
<Translation>
<Keyword>MinorConnectorCurveNumberedNameId</Keyword>
<Text>Minor connector curve %d</Text>
</Translation>
<Translation>
<Keyword>ClaspApproachCurveNameId</Keyword>
<Text>Clasp approach</Text>
</Translation>
<Translation>
<Keyword>ClaspApproachCurveNumberedNameId</Keyword>
<Text>Clasp approach curve %d</Text>
</Translation>
<Translation>
<Keyword>BuildPartId</Keyword>
<Text>Output part %d</Text>
</Translation>
<Translation>
<Keyword>SkippingUnfitCurveWithExplanationId</Keyword>
<Text>Curves fit to the surface will not be used.
If you really want to use this curve, go to the curve tool,
select 'Edit curve', select the curve, and deselect the 'Fit curve' button.</Text>
</Translation>
<Translation>
<Keyword>english</Keyword>
<Text>english</Text>
</Translation>
<Translation>
<Keyword>german</Keyword>
<Text>german</Text>
</Translation>
<Translation>
<Keyword>UndercutColorScaleId</Keyword>
<Text>Undercut color scale</Text>
</Translation>
<Translation>
<Keyword>DepthId</Keyword>
<Text>Depth:</Text>
</Translation>
<Translation>
<Keyword>ColorId</Keyword>
<Text>Color:</Text>
</Translation>
<Translation>
<Keyword>mm</Keyword>
<Text>mm</Text>
</Translation>
<Translation>
<Keyword>SettingsId</Keyword>
<Text>Settings</Text>
</Translation>
<Translation>
<Keyword>DefaultInsertionId</Keyword>
<Text>Default insertion</Text>
</Translation>
<Translation>
<Keyword>DefaultInsertionToolTipId</Keyword>
<Text>Reset the path of insertion
to the default direction.</Text>
</Translation>
<Translation>
<Keyword>SetInsertionFromViewId</Keyword>
<Text>Set from view</Text>
</Translation>
<Translation>
<Keyword>SetInsertionFromViewToolTipId</Keyword>
<Text>Set the insertion path
to match the view direction.</Text>
</Translation>
<Translation>
<Keyword>SurveyBlockOutUndercutsId</Keyword>
<Text>Block out undercuts</Text>
</Translation>
<Translation>
<Keyword>DraftAngleId</Keyword>
<Text>Draft angle</Text>
</Translation>
<Translation>
<Keyword>DraftAngleToolTipId</Keyword>
<Text>Sets draft angle for
blocking out undercuts.</Text>
</Translation>
<Translation>
<Keyword>SurveyApplyId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>SurveyApplyToolTipId</Keyword>
<Text>Performs the blockout using current
values and insertion axis.</Text>
</Translation>
<Translation>
<Keyword>HardId</Keyword>
<Text>Hard</Text>
</Translation>
<Translation>
<Keyword>SoftId</Keyword>
<Text>Soft</Text>
</Translation>
<Translation>
<Keyword>WaxHardnessId</Keyword>
<Text>Wax hardness</Text>
</Translation>
<Translation>
<Keyword>AreaOfInfluenceId</Keyword>
<Text>Area of influence</Text>
</Translation>
<Translation>
<Keyword>SmallId</Keyword>
<Text>Small</Text>
</Translation>
<Translation>
<Keyword>LargeId</Keyword>
<Text>Large</Text>
</Translation>
<Translation>
<Keyword>SmoothToggleId</Keyword>
<Text>Smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothToggleToolTipId</Keyword>
<Text>Switch to smoothing mode</Text>
</Translation>
<Translation>
<Keyword>SmudgeToggleId</Keyword>
<Text>Smudge</Text>
</Translation>
<Translation>
<Keyword>SmudgeToggleToolTipId</Keyword>
<Text>Switch to smudging mode</Text>
</Translation>
<Translation>
<Keyword>FillRemovedBlockoutWithWaxId</Keyword>
<Text>Fill removed blockout with wax</Text>
</Translation>
<Translation>
<Keyword>FillRemovedBlockoutWithWaxToolTipId</Keyword>
<Text>Removed blockout will become wax
after leaving the tool</Text>
</Translation>
<Translation>
<Keyword>ShowWaxId</Keyword>
<Text>Show wax</Text>
</Translation>
<Translation>
<Keyword>ShowWaxToolTipId</Keyword>
<Text>Show the hidden wax.
Suspends blockout editing.</Text>
</Translation>
<Translation>
<Keyword>ToolSizeId</Keyword>
<Text>Tool size</Text>
</Translation>
<Translation>
<Keyword>DefaultSmudgeStatusBarId</Keyword>
<Text>Drag mouse to remove, SHIFT and drag to add blockout. Use ALT-1 to toggle smoothing.</Text>
</Translation>
<Translation>
<Keyword>DefaultSmoothStatusBarId</Keyword>
<Text>Drag mouse over blockout to smooth. Use ALT-1 to toggle to smudging, ALT-234 for modes.</Text>
</Translation>
<Translation>
<Keyword>SmoothLevelId</Keyword>
<Text>Smooth level</Text>
</Translation>
<Translation>
<Keyword>SmoothLevelToolTipId</Keyword>
<Text>Smoothing strength</Text>
</Translation>
<Translation>
<Keyword>ReadyId</Keyword>
<Text>Ready</Text>
</Translation>
<Translation>
<Keyword>SurveyInfoId</Keyword>
<Text>Orient and set the desired path of insertion, then press 'Apply' to block out undercuts.</Text>
</Translation>
<Translation>
<Keyword>GpuInitFirstTimeId</Keyword>
<Text>Initializing GPU (first-time initialization may take a few minutes).</Text>
</Translation>
<Translation>
<Keyword>OpeningSelectedModelId</Keyword>
<Text>Opening selected model</Text>
</Translation>
<Translation>
<Keyword>PreparingToEditBlockoutId</Keyword>
<Text>Preparing to edit blockout</Text>
</Translation>
<Translation>
<Keyword>SmoothMeltToolTipId</Keyword>
<Text>Melt smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothMaterialToolTipId</Keyword>
<Text>Regular smooth</Text>
</Translation>
<Translation>
<Keyword>AddMaterialToolTipId</Keyword>
<Text>Additive Smooth</Text>
</Translation>
<Translation>
<Keyword>RemoveMaterialToolTipId</Keyword>
<Text>Subtractive smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothMeltId</Keyword>
<Text>Melt smooth</Text>
</Translation>
<Translation>
<Keyword>SmoothMaterialId</Keyword>
<Text>Regular smooth</Text>
</Translation>
<Translation>
<Keyword>AddMaterialId</Keyword>
<Text>Additive smooth</Text>
</Translation>
<Translation>
<Keyword>RemoveMaterialId</Keyword>
<Text>Subtractive smooth</Text>
</Translation>
<Translation>
<Keyword>WaxHardnessToolTipId</Keyword>
<Text>Controls tool speed</Text>
</Translation>
<Translation>
<Keyword>AreaOfInfluenceToolTipId</Keyword>
<Text>Sets area of influence</Text>
</Translation>
<Translation>
<Keyword>UndoId</Keyword>
<Text>Undo</Text>
</Translation>
<Translation>
<Keyword>RedoId</Keyword>
<Text>Redo</Text>
</Translation>
<Translation>
<Keyword>SettingsToolTipId</Keyword>
<Text>Show advanced settings</Text>
</Translation>
<Translation>
<Keyword>GeneratingRefractoryColorMapId</Keyword>
<Text>Generating a color map to indicate the depth of refractory undercuts.</Text>
</Translation>
<Translation>
<Keyword>GeneratingMeshColorMapId</Keyword>
<Text>Generating a color map to indicate the depth of mesh undercuts.</Text>
</Translation>
<Translation>
<Keyword>GeneratingRefractoryId</Keyword>
<Text>Generating refractory model</Text>
</Translation>
<Translation>
<Keyword>UpdatingUndercutColorsId</Keyword>
<Text>Updating undercut colors</Text>
</Translation>
<Translation>
<Keyword>ReloadingSurveyToolId</Keyword>
<Text>Reloading the survey tool</Text>
</Translation>
<Translation>
<Keyword>FinishingSurveyId</Keyword>
<Text>Updating the refractory model with blockout wax and generating undercut depth coloring.</Text>
</Translation>
<Translation>
<Keyword>SetsToolSizeId</Keyword>
<Text>Sets tool size (SHIFT +/-)</Text>
</Translation>
<Translation>
<Keyword>DrawNewCurveId</Keyword>
<Text>Draw new curve</Text>
</Translation>
<Translation>
<Keyword>DrawNewCurveToolTipId</Keyword>
<Text>Click to add points.
Double click to end.</Text>
</Translation>
<Translation>
<Keyword>DrawReplaceSegmentId</Keyword>
<Text>Draw/replace segment</Text>
</Translation>
<Translation>
<Keyword>DrawReplaceSegmentToolTipId</Keyword>
<Text>Start and end new segment
on an existing curve.</Text>
</Translation>
<Translation>
<Keyword>MoveControlPointsId</Keyword>
<Text>Edit curve</Text>
</Translation>
<Translation>
<Keyword>MoveControlPointsToolTipId</Keyword>
<Text>Select the curve you want to edit.</Text>
</Translation>
<Translation>
<Keyword>CurveFittingId</Keyword>
<Text>Fitting:</Text>
</Translation>
<Translation>
<Keyword>FitToWaxId</Keyword>
<Text>Fit to wax</Text>
</Translation>
<Translation>
<Keyword>FitToWaxToolTipId</Keyword>
<Text>Fit curve to topmost surface.
Uncheck to free-float curve between points.</Text>
</Translation>
<Translation>
<Keyword>FitToRefractoryId</Keyword>
<Text>Fit to refractory</Text>
</Translation>
<Translation>
<Keyword>FitToRefractoryToolTipId</Keyword>
<Text>Fit curve control points under the wax</Text>
</Translation>
<Translation>
<Keyword>FitToMeshId</Keyword>
<Text>Fit to model scan</Text>
</Translation>
<Translation>
<Keyword>FitToMeshToolTipId</Keyword>
<Text>Fit curve to mesh</Text>
</Translation>
<Translation>
<Keyword>TwoPointCurveId</Keyword>
<Text>Two-point curve:</Text>
</Translation>
<Translation>
<Keyword>AttachableCurveId</Keyword>
<Text>T-junction curve:</Text>
</Translation>
<Translation>
<Keyword>LeaveCurvesOpenId</Keyword>
<Text>Leave curves open:</Text>
</Translation>
<Translation>
<Keyword>CurveLengthId</Keyword>
<Text>Curve length (mm)</Text>
</Translation>
<Translation>
<Keyword>EditPointsId</Keyword>
<Text>Edit points</Text>
</Translation>
<Translation>
<Keyword>ReduceToleranceId</Keyword>
<Text>Tolerance:</Text>
</Translation>
<Translation>
<Keyword>ReduceToleranceToolTipId</Keyword>
<Text>Reduce triangles in output within a specified tolerance</Text>
</Translation>
<Translation>
<Keyword>OrientToInsertionId</Keyword>
<Text>Orient to insertion axis</Text>
</Translation>
<Translation>
<Keyword>OrientToInsertionToolTipId</Keyword>
<Text>Rotate output to insertion axis</Text>
</Translation>
<Translation>
<Keyword>AutoReliefId</Keyword>
<Text>Auto relief</Text>
</Translation>
<Translation>
<Keyword>AutoReliefToolTipId</Keyword>
<Text>Use algorithm to improve fit</Text>
</Translation>
<Translation>
<Keyword>FillVoidCheckId</Keyword>
<Text>Fill void check</Text>
</Translation>
<Translation>
<Keyword>FillVoidCheckToolTipId</Keyword>
<Text>Find and fill any voids in wax</Text>
</Translation>
<Translation>
<Keyword>DeleteSceneOnExitId</Keyword>
<Text>Delete scene on exit</Text>
</Translation>
<Translation>
<Keyword>DeleteConstructedPartId</Keyword>
<Text>Delete constructed part</Text>
</Translation>
<Translation>
<Keyword>BuildCompleteId</Keyword>
<Text>Build complete</Text>
</Translation>
<Translation>
<Keyword>SavingTheModelId</Keyword>
<Text>Saving the model</Text>
</Translation>
<Translation>
<Keyword>RemovingRefractoryId</Keyword>
<Text>Removing refractory</Text>
</Translation>
<Translation>
<Keyword>BuildInProgressId</Keyword>
<Text>Save for build in progress, please wait...</Text>
</Translation>
<Translation>
<Keyword>BuildFailedId</Keyword>
<Text>Build failed</Text>
</Translation>
<Translation>
<Keyword>VirtualModelId</Keyword>
<Text>Creating virtual model</Text>
</Translation>
<Translation>
<Keyword>FillingVoidsId</Keyword>
<Text>Filling voids</Text>
</Translation>
<Translation>
<Keyword>ApplyingAutoReliefId</Keyword>
<Text>Applying auto relief</Text>
</Translation>
<Translation>
<Keyword>ReducingNewMeshId</Keyword>
<Text>Creating new mesh. Please wait.</Text>
</Translation>
<Translation>
<Keyword>ExportingStlId</Keyword>
<Text>Exporting STL</Text>
</Translation>
<Translation>
<Keyword>RemovingSceneFileId</Keyword>
<Text>Removing scene file</Text>
</Translation>
<Translation>
<Keyword>RestoringSceneId</Keyword>
<Text>Restoring scene</Text>
</Translation>
<Translation>
<Keyword>SavingSceneId</Keyword>
<Text>Saving scene</Text>
</Translation>
<Translation>
<Keyword>TriangleReductionId</Keyword>
<Text>Reducing triangles</Text>
</Translation>
<Translation>
<Keyword>GeneratingTrianglesId</Keyword>
<Text>Generating triangles</Text>
</Translation>
<Translation>
<Keyword>SaveForBuildId</Keyword>
<Text>Save for build</Text>
</Translation>
<Translation>
<Keyword>IncreasingModelToFitId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>CuttingPartialPonticNumId</Keyword>
<Text>Cutting partial pontic %s</Text>
</Translation>
<Translation>
<Keyword>MakingPartialPonticNumHollowId</Keyword>
<Text>Making partial pontic %s hollow</Text>
</Translation>
<Translation>
<Keyword>InsertingPartNumId</Keyword>
<Text>Inserting part %s</Text>
</Translation>
<Translation>
<Keyword>AdvancedDialogTitleId</Keyword>
<Text>Advanced</Text>
</Translation>
<Translation>
<Keyword>DefaultButtonId</Keyword>
<Text>Use defaults</Text>
</Translation>
<Translation>
<Keyword>ScaleModelId</Keyword>
<Text>Scale</Text>
</Translation>
<Translation>
<Keyword>StaticReliefId</Keyword>
<Text>Static relief</Text>
</Translation>
<Translation>
<Keyword>ClaspAreaId</Keyword>
<Text>Clasps</Text>
</Translation>
<Translation>
<Keyword>OtherAreaId</Keyword>
<Text>Other</Text>
</Translation>
<Translation>
<Keyword>DynamicReliefId</Keyword>
<Text>Dynamic relief</Text>
</Translation>
<Translation>
<Keyword>OtherAreaNotClaspsId</Keyword>
<Text>Other (except clasps)</Text>
</Translation>
<Translation>
<Keyword>ConnectorAreaId</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>ImportedPartsAreaId</Keyword>
<Text>Imported parts</Text>
</Translation>
<Translation>
<Keyword>ClearId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>ApplyId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>SubtractPipeId</Keyword>
<Text>Subtract pipe</Text>
</Translation>
<Translation>
<Keyword>SubtractPipeToolTipId</Keyword>
<Text>Remove wax from model with pipe</Text>
</Translation>
<Translation>
<Keyword>AddPipeId</Keyword>
<Text>Add pipe</Text>
</Translation>
<Translation>
<Keyword>AddPipeToolTipId</Keyword>
<Text>Add pipe to wax</Text>
</Translation>
<Translation>
<Keyword>EndPipeDiamId</Keyword>
<Text>End diam.</Text>
</Translation>
<Translation>
<Keyword>EndPipeDiamToolTipId</Keyword>
<Text>To create a variable diameter pipe,
enable the 'End diameter' field.</Text>
</Translation>
<Translation>
<Keyword>StartPipeDiamId</Keyword>
<Text>Start diam.</Text>
</Translation>
<Translation>
<Keyword>BlendSmoothlyIntoMaskId</Keyword>
<Text>Blend smoothly into mask</Text>
</Translation>
<Translation>
<Keyword>BlendSmoothlyIntoMaskToolTipId</Keyword>
<Text>Make smooth transition to mask boundary</Text>
</Translation>
<Translation>
<Keyword>HidingBlockoutAndRefractoryId</Keyword>
<Text>Hiding blockout and refractory</Text>
</Translation>
<Translation>
<Keyword>HideBlockoutAndRefractoryId</Keyword>
<Text>Hide blockout and refractory</Text>
</Translation>
<Translation>
<Keyword>HideBlockoutAndRefractoryToolTipId</Keyword>
<Text>Temporarily remove refractory
to edit bottom of the wax.</Text>
</Translation>
<Translation>
<Keyword>ThicknessId</Keyword>
<Text>Thickness</Text>
</Translation>
<Translation>
<Keyword>ThicknessAdvId</Keyword>
<Text>Thickness:</Text>
</Translation>
<Translation>
<Keyword>CurvePipeMessageId</Keyword>
<Text>Select one or more curves to create a pipe.</Text>
</Translation>
<Translation>
<Keyword>ClearPipeId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>ClearPipeToolTipId</Keyword>
<Text>Clears all selected curves.</Text>
</Translation>
<Translation>
<Keyword>SmoothingWaxId</Keyword>
<Text>Smoothing the selected wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>DragToSmoothId</Keyword>
<Text>Drag mouse over wax to smooth.</Text>
</Translation>
<Translation>
<Keyword>SmoothSmudgeId</Keyword>
<Text>Drag mouse to remove. Drag mouse and press SHIFT to add.</Text>
</Translation>
<Translation>
<Keyword>CreateMeshId</Keyword>
<Text>Create mesh</Text>
</Translation>
<Translation>
<Keyword>CreateConnectorId</Keyword>
<Text>Create connector</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewId</Keyword>
<Text>Preview</Text>
</Translation>
<Translation>
<Keyword>MeshPreviewToolTipId</Keyword>
<Text>Preview the mesh</Text>
</Translation>
<Translation>
<Keyword>MeshClearId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>MeshClearToolTipId</Keyword>
<Text>Clear the preview</Text>
</Translation>
<Translation>
<Keyword>MeshApplyId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>MeshConnectorSelectId</Keyword>
<Text>Use the mouse to (de)select curve loops that you wish to use, use CTRL to force the curve to be a connector curve.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserComputingId</Keyword>
<Text>Wrapping preview of mesh image to wax, please wait...</Text>
</Translation>
<Translation>
<Keyword>ApplyWaitId</Keyword>
<Text>Applying wax, please wait...</Text>
</Translation>
<Translation>
<Keyword>ModifyingWaitId</Keyword>
<Text>Modifying mesh, please wait...</Text>
</Translation>
<Translation>
<Keyword>LoadTextureWaitId</Keyword>
<Text>Loading new pattern, please wait...</Text>
</Translation>
<Translation>
<Keyword>UnknownErrorId</Keyword>
<Text>An unknown error occurred.</Text>
</Translation>
<Translation>
<Keyword>RepositionTriadId</Keyword>
<Text>Drag the on-screen interactor to scale and position the mesh preview.</Text>
</Translation>
<Translation>
<Keyword>TranslateTextureId</Keyword>
<Text>Drag the image</Text>
</Translation>
<Translation>
<Keyword>RotateTextureId</Keyword>
<Text>Rotate the image</Text>
</Translation>
<Translation>
<Keyword>ScaleTextureId</Keyword>
<Text>Scale the image</Text>
</Translation>
<Translation>
<Keyword>EmbossOffsetId</Keyword>
<Text>Change the emboss distance</Text>
</Translation>
<Translation>
<Keyword>AdjustMeshPreviewId</Keyword>
<Text>Adjust the preview by manipulating the triad or settings. When done, press 'Apply' to create the wax.</Text>
</Translation>
<Translation>
<Keyword>TextureId</Keyword>
<Text>Pattern:</Text>
</Translation>
<Translation>
<Keyword>HoleSizeId</Keyword>
<Text>Hole size:</Text>
</Translation>
<Translation>
<Keyword>MeshThicknessId</Keyword>
<Text>Mesh wax:</Text>
</Translation>
<Translation>
<Keyword>MeshReliefWaxId</Keyword>
<Text>Relief wax:</Text>
</Translation>
<Translation>
<Keyword>MeshSMoothingId</Keyword>
<Text>Smoothing:</Text>
</Translation>
<Translation>
<Keyword>MeshTensionId</Keyword>
<Text>Tension:</Text>
</Translation>
<Translation>
<Keyword>StippleScaleId</Keyword>
<Text>Scale:</Text>
</Translation>
<Translation>
<Keyword>StippleThicknessId</Keyword>
<Text>Offset:</Text>
</Translation>
<Translation>
<Keyword>BaseThicknessId</Keyword>
<Text>Thickness:</Text>
</Translation>
<Translation>
<Keyword>ConnectorUseFalloffId</Keyword>
<Text>Use falloff</Text>
</Translation>
<Translation>
<Keyword>LinearFalloffId</Keyword>
<Text>Linear falloff:</Text>
</Translation>
<Translation>
<Keyword>PartialMeshId</Keyword>
<Text>Mesh</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorId</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>LowId</Keyword>
<Text>Low</Text>
</Translation>
<Translation>
<Keyword>MediumId</Keyword>
<Text>Medium</Text>
</Translation>
<Translation>
<Keyword>HighId</Keyword>
<Text>High</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>BEGO-Coarse</Keyword>
<Text>Coarse</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>BEGO-Fine</Keyword>
<Text>Fine</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>Leather-1</Keyword>
<Text>Leather 1</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>Leather-2</Keyword>
<Text>Leather 2</Text>
</Translation>
<Translation>
<!-- Major connector texture (stipple) filename -->
<Keyword>Smooth-1</Keyword>
<Text>Smooth</Text>
</Translation>
<Translation>
<!-- Mesh Riser texture filename -->
<Keyword>Round-1</Keyword>
<Text>Round</Text>
</Translation>
<Translation>
<!-- Mesh Riser texture filename -->
<Keyword>Square-1</Keyword>
<Text>Square</Text>
</Translation>
<Translation>
<Keyword>ApplyingWaxHoleWaitId</Keyword>
<Text>Applying wax hole, please wait...</Text>
</Translation>
<Translation>
<Keyword>MajorConnectorCurveSelectId</Keyword>
<Text>First, select the outer curve loop defining the wax area, then, if desired, an inner curve loop to create a hole.</Text>
</Translation>
<Translation>
<Keyword>GpuComputationPrepId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>ComputingMaskVolId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>ComputingMaskDistanceVolId</Keyword>
<Text>Processing model</Text>
</Translation>
<Translation>
<Keyword>ConvertingToWaxWaitId</Keyword>
<Text>Converting to wax, please wait...</Text>
</Translation>
<Translation>
<Keyword>StippleId</Keyword>
<Text>Stipple pattern</Text>
</Translation>
<Translation>
<Keyword>MeshRiserAutoSelectId</Keyword>
<Text>Auto-select</Text>
</Translation>
<Translation>
<Keyword>MeshRiserAutoSelectToolTipId</Keyword>
<Text>Automatically select the curve-bounded mesh regions. Invisible curves will be skipped.</Text>
</Translation>
<Translation>
<Keyword>MeshRiserSelectCurvesId</Keyword>
<Text>Select a set of curves that enclose the wax region to be embossed.</Text>
</Translation>
<!-- clasp profile filenames begin-->
<Translation>
<Keyword>ApproachArm</Keyword>
<Text>Approach arm</Text>
</Translation>
<Translation>
<Keyword>Anterior</Keyword>
<Text>Anterior</Text>
</Translation>
<Translation>
<Keyword>Posterior</Keyword>
<Text>Posterior</Text>
</Translation>
<Translation>
<Keyword>GuidePlane</Keyword>
<Text>Guide plane</Text>
</Translation>
<Translation>
<Keyword>Ring</Keyword>
<Text>Ring</Text>
</Translation>
<Translation>
<Keyword>RoundWire</Keyword>
<Text>Round wire</Text>
</Translation>
<!-- clasp profile filenames end-->
<Translation>
<Keyword>ClaspTypeId</Keyword>
<Text>Type:</Text>
</Translation>
<Translation>
<Keyword>ClaspType1Id</Keyword>
<Text>Ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType2Id</Keyword>
<Text>Ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType3Id</Keyword>
<Text>J clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType4Id</Keyword>
<Text>T clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType5Id</Keyword>
<Text>T clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType1ToolTipId</Keyword>
<Text>Single curve ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType2ToolTipId</Keyword>
<Text>Dual curve ring clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType3ToolTipId</Keyword>
<Text>Dual curve J clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType4ToolTipId</Keyword>
<Text>Dual curve T clasp</Text>
</Translation>
<Translation>
<Keyword>ClaspType5ToolTipId</Keyword>
<Text>Triple curve T clasp</Text>
</Translation>
<Translation>
<Keyword>ProfileId</Keyword>
<Text>Profile</Text>
</Translation>
<Translation>
<Keyword>FlipProfileId</Keyword>
<Text>Flip profile</Text>
</Translation>
<Translation>
<Keyword>FlipProfileToolTipId</Keyword>
<Text>Flip profile</Text>
</Translation>
<Translation>
<Keyword>RotateProfileId</Keyword>
<Text>Rotate profile</Text>
</Translation>
<Translation>
<Keyword>RotateProfileToolTipId</Keyword>
<Text>Rotate the profile 180 degrees</Text>
</Translation>
<Translation>
<Keyword>EditProfileId</Keyword>
<Text>Edit profile</Text>
</Translation>
<Translation>
<Keyword>EditProfileToolTipId</Keyword>
<Text>Edit this profile, delete it
or create a new one.</Text>
</Translation>
<Translation>
<Keyword>SaveId</Keyword>
<Text>Save</Text>
</Translation>
<Translation>
<Keyword>SaveAsId</Keyword>
<Text>Save as</Text>
</Translation>
<Translation>
<Keyword>DeleteId</Keyword>
<Text>Delete</Text>
</Translation>
<Translation>
<Keyword>DoneId</Keyword>
<Text>Done</Text>
</Translation>
<Translation>
<Keyword>OverwriteProfileId</Keyword>
<Text>Overwrite existing profile named "%s"?</Text>
</Translation>
<Translation>
<Keyword>ChooseUniqueProfileNameId</Keyword>
<Text>Choose a unique name for your custom profile,
unless you wish to replace an existing profile.</Text>
</Translation>
<Translation>
<Keyword>SaveCustomProfileId</Keyword>
<Text>Save custom profile</Text>
</Translation>
<Translation>
<Keyword>NumberId</Keyword>
<Text>Number:</Text>
</Translation>
<Translation>
<Keyword>NameId</Keyword>
<Text>Name</Text>
</Translation>
<Translation>
<Keyword>PipeProgressId</Keyword>
<Text>Converting pipe to wax</Text>
</Translation>
<Translation>
<Keyword>SelectSingleCurveForClaspId</Keyword>
<Text>Select a single curve to form the clasp</Text>
</Translation>
<Translation>
<Keyword>SelectTwoCurvesForClaspId</Keyword>
<Text>Select two curves to form the clasp</Text>
</Translation>
<Translation>
<Keyword>SelectTwoCurvesForClaspRingFirstId</Keyword>
<Text>Select two curves to form the clasp. The connector curve must be selected before the ring curve.</Text>
</Translation>
<Translation>
<Keyword>SelectThreeCurvesForClaspRingFirstId</Keyword>
<Text>Select three curves to form the clasp. The connector curve must be selected before the ring curves.</Text>
</Translation>
<Translation>
<Keyword>WidthAdvId</Keyword>
<Text>Width:</Text>
</Translation>
<Translation>
<Keyword>Width1Id</Keyword>
<Text>Width 1:</Text>
</Translation>
<Translation>
<Keyword>Width2Id</Keyword>
<Text>Width 2:</Text>
</Translation>
<Translation>
<Keyword>Width3Id</Keyword>
<Text>Width 3:</Text>
</Translation>
<Translation>
<Keyword>LengthId</Keyword>
<Text>Length</Text>
</Translation>
<Translation>
<Keyword>LengthAdvId</Keyword>
<Text>Length:</Text>
</Translation>
<Translation>
<Keyword>ClaspAdvId</Keyword>
<Text>Clasp:</Text>
</Translation>
<Translation>
<Keyword>ApproachAdvId</Keyword>
<Text>Approach:</Text>
</Translation>
<Translation>
<Keyword>SwapEndsId</Keyword>
<Text>Swap ends</Text>
</Translation>
<Translation>
<Keyword>SizeId</Keyword>
<Text>Size</Text>
</Translation>
<Translation>
<Keyword>TaperEndsId</Keyword>
<Text>Taper ends</Text>
</Translation>
<Translation>
<Keyword>OffsetAboveSurfaceId</Keyword>
<Text>Offset above surface</Text>
</Translation>
<Translation>
<Keyword>TaperLengthFromEnd1Id</Keyword>
<Text>Taper length from end 1</Text>
</Translation>
<Translation>
<Keyword>SettingsAdvId</Keyword>
<Text>Settings: </Text>
</Translation>
<Translation>
<Keyword>FinishlinePreviewId</Keyword>
<Text>Preview</Text>
</Translation>
<Translation>
<Keyword>FinishlinePreviewToolTipId</Keyword>
<Text>Preview the finish line</Text>
</Translation>
<Translation>
<Keyword>FixedAspectId</Keyword>
<Text>Fixed aspect</Text>
</Translation>
<Translation>
<Keyword>ActualSizeId</Keyword>
<Text>Actual size</Text>
</Translation>
<Translation>
<Keyword>DepthBelowSurfaceId</Keyword>
<Text>Depth below surface</Text>
</Translation>
<!-- finishline profile filenames begin -->
<Translation>
<Keyword>Lower</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>Sharkfin</Keyword>
<Text>Shark fin</Text>
</Translation>
<Translation>
<Keyword>Standard-1</Keyword>
<Text>Standard 1</Text>
</Translation>
<Translation>
<Keyword>Standard-2</Keyword>
<Text>Standard 2</Text>
</Translation>
<Translation>
<Keyword>Upper</Keyword>
<Text>Upper</Text>
</Translation>
<!-- finishline profile filenames end -->
<Translation>
<Keyword>ProfileOrientationId</Keyword>
<Text>Profile orientation</Text>
</Translation>
<Translation>
<Keyword>CreateEndcapsId</Keyword>
<Text>Capped ends</Text>
</Translation>
<Translation>
<Keyword>WaxSurfaceId</Keyword>
<Text>Wax surface</Text>
</Translation>
<Translation>
<Keyword>RefractorySurfaceId</Keyword>
<Text>Refractory surface</Text>
</Translation>
<Translation>
<Keyword>InsertionPathId</Keyword>
<Text>Insertion path</Text>
</Translation>
<Translation>
<Keyword>CurveTangentId</Keyword>
<Text>Curve tangent</Text>
</Translation>
<Translation>
<Keyword>NoRotationId</Keyword>
<Text>No rotation</Text>
</Translation>
<!-- bar profile filenames begin -->
<Translation>
<Keyword>Circle</Keyword>
<Text>Circle</Text>
</Translation>
<Translation>
<Keyword>Halfround</Keyword>
<Text>Half round</Text>
</Translation>
<Translation>
<Keyword>Standard</Keyword>
<Text>Standard bar</Text>
</Translation>
<Translation>
<Keyword>TearDrop</Keyword>
<Text>Tear drop</Text>
</Translation>
<!-- bar profile filenames end -->
<Translation>
<Keyword>DefaultId</Keyword>
<Text>Default</Text>
</Translation>
<Translation>
<Keyword>AddWaxWaitId</Keyword>
<Text>Adding wax. This may take a few moments.</Text>
</Translation>
<Translation>
<Keyword>SelectStlId</Keyword>
<Text>Load scan data</Text>
</Translation>
<Translation>
<Keyword>ConvertingPartsToWaxId</Keyword>
<Text>Converting imported part %s to wax</Text>
</Translation>
<Translation>
<Keyword>ConvertingPartsToRefractoryId</Keyword>
<Text>Converting imported part %s to refractory</Text>
</Translation>
<Translation>
<Keyword>AddFileId</Keyword>
<Text>Add file</Text>
</Translation>
<Translation>
<Keyword>ConvertToWaxId</Keyword>
<Text>Convert to wax</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsReferenceId</Keyword>
<Text>Reference</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsWaxId</Keyword>
<Text>Editable</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsMergedMeshId</Keyword>
<Text>Non-editable</Text>
</Translation>
<Translation>
<Keyword>ImportedPartAsRefactoryId</Keyword>
<Text>Refractory</Text>
</Translation>
<Translation>
<Keyword>SaveAnywayId</Keyword>
<Text>Save anyway</Text>
</Translation>
<Translation>
<Keyword>SaveAnywayExtId</Keyword>
<Text>The existing scene will be overwritten</Text>
</Translation>
<Translation>
<Keyword>SaveAsExtId</Keyword>
<Text>You can select a new location or filename</Text>
</Translation>
<Translation>
<Keyword>SaveKeepBothId</Keyword>
<Text>Save, but keep both files</Text>
</Translation>
<Translation>
<Keyword>SaveKeepBothExtId</Keyword>
<Text>The pre-existing scene will be renamed</Text>
</Translation>
<Translation>
<Keyword>CancelExtId</Keyword>
<Text>The scene will not be saved</Text>
</Translation>
<Translation>
<Keyword>FinishId</Keyword>
<Text>Finish</Text>
</Translation>
<Translation>
<Keyword>MillingId</Keyword>
<Text>Milling</Text>
</Translation>
<Translation>
<Keyword>WatertightnessId</Keyword>
<Text>Watertightness</Text>
</Translation>
<Translation>
<Keyword>FitToPartialFilesId</Keyword>
<Text>Make separate files, fit to partial</Text>
</Translation>
<Translation>
<Keyword>OptimizeMergedPartsForId</Keyword>
<Text>Optimize merged parts for</Text>
</Translation>
<Translation>
<Keyword>PartialPonticsId</Keyword>
<Text>Partial pontics</Text>
</Translation>
<Translation>
<Keyword>MinimumThicknessId</Keyword>
<Text>Minimum thickness</Text>
</Translation>
<Translation>
<Keyword>MakeHollowId</Keyword>
<Text>Make hollow</Text>
</Translation>
<Translation>
<Keyword>DraftAngleForFitToPartialId</Keyword>
<Text>Draft angle</Text>
</Translation>
<Translation>
<Keyword>ToolRadiusForFitToPartialId</Keyword>
<Text>Tool diameter</Text>
</Translation>
<Translation>
<Keyword>GapForFitToPartialId</Keyword>
<Text>Offset</Text>
</Translation>
<Translation>
<Keyword>MakeImportedPartActiveId</Keyword>
<Text>Active</Text>
</Translation>
<Translation>
<Keyword>CutoffForFitToPartialId</Keyword>
<Text>Distance from relief</Text>
</Translation>
<Translation>
<Keyword>InnerTrianglesToRefractory</Keyword>
<Text>Inside to refractory</Text>
</Translation>
<Translation>
<Keyword>OptimizedForMillingId</Keyword>
<Text>Optimized for milling</Text>
</Translation>
<Translation>
<Keyword>OptimizedForWatertightnessId</Keyword>
<Text>Optimized for watertightness</Text>
</Translation>
<Translation>
<Keyword>ImportMeshToReferenceId</Keyword>
<Text>Creating new piece. Please wait...</Text>
</Translation>
<Translation>
<Keyword>ImportGeometryId</Keyword>
<Text>Importing geometry. Please wait...</Text>
</Translation>
<Translation>
<Keyword>ImportMeshToWaxId</Keyword>
<Text>Converting mesh to wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>InvolvedHealthyToothId</Keyword>
<Text>Healthy tooth</Text>
</Translation>
<Translation>
<Keyword>PartialPonticId</Keyword>
<Text>Partial pontic</Text>
</Translation>
<Translation>
<Keyword>PonticId</Keyword>
<Text>Pontic</Text>
</Translation>
<Translation>
<Keyword>CrownId</Keyword>
<Text>Crown</Text>
</Translation>
<Translation>
<Keyword>WaxupId</Keyword>
<Text>Waxup</Text>
</Translation>
<Translation>
<Keyword>InlayId</Keyword>
<Text>Inlay</Text>
</Translation>
<Translation>
<Keyword>BridgeId</Keyword>
<Text>Bridge</Text>
</Translation>
<Translation>
<Keyword>ImportedPartialId</Keyword>
<Text>Imported partial</Text>
</Translation>
<Translation>
<Keyword>TelescopeId</Keyword>
<Text>Telescope</Text>
</Translation>
<Translation>
<Keyword>VeneerId</Keyword>
<Text>Veneer</Text>
</Translation>
<Translation>
<Keyword>CopingId</Keyword>
<Text>Coping</Text>
</Translation>
<Translation>
<Keyword>InnerCopingId</Keyword>
<Text>Inner coping</Text>
</Translation>
<Translation>
<Keyword>AttachmentId</Keyword>
<Text>Attachment</Text>
</Translation>
<Translation>
<Keyword>InnerCrownId</Keyword>
<Text>Inner crown</Text>
</Translation>
<Translation>
<Keyword>InnerWaxupId</Keyword>
<Text>Inner waxup</Text>
</Translation>
<Translation>
<Keyword>InnerBridgeId</Keyword>
<Text>Inner bridge</Text>
</Translation>
<Translation>
<Keyword>BarPillarId</Keyword>
<Text>Bar pillar</Text>
</Translation>
<Translation>
<Keyword>BarSegmentId</Keyword>
<Text>Bar segment</Text>
</Translation>
<Translation>
<Keyword>NextWizardId</Keyword>
<Text>Next</Text>
</Translation>
<Translation>
<Keyword>BackWizardId</Keyword>
<Text>Back</Text>
</Translation>
<Translation>
<Keyword>DoneWizardId</Keyword>
<Text>Done</Text>
</Translation>
<Translation>
<Keyword>WizardId</Keyword>
<Text>Wizard</Text>
</Translation>
<Translation>
<Keyword>ExpertId</Keyword>
<Text>Expert</Text>
</Translation>
<Translation>
<Keyword>FixDraftModeId</Keyword>
<Text>Mode:</Text>
</Translation>
<Translation>
<Keyword>SetPathModeId</Keyword>
<Text>Set path</Text>
</Translation>
<Translation>
<Keyword>SelectAreaId</Keyword>
<Text>Select area</Text>
</Translation>
<Translation>
<Keyword>SelectAreaToolTipId</Keyword>
<Text>Select area</Text>
</Translation>
<Translation>
<Keyword>SetFromViewId</Keyword>
<Text>Set from view</Text>
</Translation>
<Translation>
<Keyword>EraseId</Keyword>
<Text>Erase</Text>
</Translation>
<Translation>
<Keyword>SelectAllId</Keyword>
<Text>Select</Text>
</Translation>
<Translation>
<Keyword>ClearAllId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>InvertSelectionId</Keyword>
<Text>Invert</Text>
</Translation>
<Translation>
<Keyword>EraseToolTipId</Keyword>
<Text>Erase selection</Text>
</Translation>
<Translation>
<Keyword>SelectAllToolTipId</Keyword>
<Text>Select all</Text>
</Translation>
<Translation>
<Keyword>ClearAllToolTipId</Keyword>
<Text>Clear all</Text>
</Translation>
<Translation>
<Keyword>InvertSelectionToolTipId</Keyword>
<Text>Invert selection</Text>
</Translation>
<Translation>
<Keyword>SetFromViewToolTipId</Keyword>
<Text>Set the view to point down the insertion path</Text>
</Translation>
<Translation>
<Keyword>DensityId</Keyword>
<Text>Density</Text>
</Translation>
<Translation>
<Keyword>UndercutId</Keyword>
<Text>Undercut</Text>
</Translation>
<Translation>
<Keyword>BlendWithMaskId</Keyword>
<Text>Blend with mask</Text>
</Translation>
<Translation>
<Keyword>WaxOnlyId</Keyword>
<Text>Wax only</Text>
</Translation>
<Translation>
<Keyword>ApplyFeatherId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>ApplyFeatherToolTipId</Keyword>
<Text>Apply feathering to the boundary</Text>
</Translation>
<Translation>
<Keyword>PreserveDetailId</Keyword>
<Text>Preserve detail</Text>
</Translation>
<Translation>
<Keyword>FillingSelectedWaxId</Keyword>
<Text>Filling the selected wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>SmoothAreaStatusBarId</Keyword>
<Text>Drag mouse over wax to select an area to smooth</Text>
</Translation>
<Translation>
<Keyword>FeatheringWaxId</Keyword>
<Text>Feathering the selected wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>DiameterId</Keyword>
<Text>Diameter</Text>
</Translation>
<Translation>
<Keyword>FeatherLevelId</Keyword>
<Text>Feather level</Text>
</Translation>
<Translation>
<Keyword>FillPassesId</Keyword>
<Text>Fill passes</Text>
</Translation>
<Translation>
<Keyword>FillerPromptSelectRegionId</Keyword>
<Text>Select a set of curves that enclose the wax region to be filled</Text>
</Translation>
<Translation>
<Keyword>ApplyingFillerId</Keyword>
<Text>Applying filler, please wait...</Text>
</Translation>
<Translation>
<Keyword>ThicknessToolTipId</Keyword>
<Text>Extra thickness added to supplement the fill</Text>
</Translation>
<Translation>
<Keyword>ClearFillerId</Keyword>
<Text>Clear</Text>
</Translation>
<Translation>
<Keyword>ClearFillerToolTipId</Keyword>
<Text>Clear the fill preview and curve selection</Text>
</Translation>
<Translation>
<Keyword>ApplyFillerId</Keyword>
<Text>Apply</Text>
</Translation>
<Translation>
<Keyword>ApplyFillerToolTipId</Keyword>
<Text>Apply the fill</Text>
</Translation>
<Translation>
<Keyword>FillerThicknessId</Keyword>
<Text>Thickness</Text>
</Translation>
<Translation>
<Keyword>FillSmoothLevelId</Keyword>
<Text>Smooth level</Text>
</Translation>
<Translation>
<Keyword>UseRulerId</Keyword>
<Text>Use ruler</Text>
</Translation>
<Translation>
<Keyword>UseRulerToolTipId</Keyword>
<Text>Display a ToolTip of the distance tugged</Text>
</Translation>
<Translation>
<Keyword>RestrictTugToNormalId</Keyword>
<Text>Tug only straight out of surface</Text>
</Translation>
<Translation>
<Keyword>RestrictTugToNormalToolTipId</Keyword>
<Text>Restrict the tug direction to the surface normal</Text>
</Translation>
<Translation>
<Keyword>TugProcessingId</Keyword>
<Text>Modifying the model. This may take a few moments.</Text>
</Translation>
<Translation>
<Keyword>EmbossPatternId</Keyword>
<Text>Pattern</Text>
</Translation>
<Translation>
<Keyword>EmbossPatternToolTipId</Keyword>
<Text>Change the pattern used for marking wax</Text>
</Translation>
<Translation>
<Keyword>EmbossTextPatternId</Keyword>
<Text>Text as pattern</Text>
</Translation>
<Translation>
<Keyword>EmbossTextPatternToolTipId</Keyword>
<Text>Use text to mark wax</Text>
</Translation>
<Translation>
<Keyword>InvertEmbossPatternId</Keyword>
<Text>Invert the emboss pattern</Text>
</Translation>
<Translation>
<Keyword>InvertEmbossPatternToolTipId</Keyword>
<Text>Invert the emboss pattern</Text>
</Translation>
<Translation>
<Keyword>EmbossPreviewId</Keyword>
<Text>Preview the emboss</Text>
</Translation>
<Translation>
<Keyword>RaiseId</Keyword>
<Text>Raise</Text>
</Translation>
<Translation>
<Keyword>DepressId</Keyword>
<Text>Depth</Text>
</Translation>
<Translation>
<Keyword>RaiseToolTipId</Keyword>
<Text>Add pattern to wax</Text>
</Translation>
<Translation>
<Keyword>DepressToolTipId</Keyword>
<Text>Remove pattern from wax</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveRaiseId</Keyword>
<Text>Raise</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveDepressId</Keyword>
<Text>Lower</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveRaiseToolTipId</Keyword>
<Text>Raise wax</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveDepressToolTipId</Keyword>
<Text>Lower wax</Text>
</Translation>
<Translation>
<Keyword>FontId</Keyword>
<Text>Font:</Text>
</Translation>
<Translation>
<Keyword>SetFontId</Keyword>
<Text>Set font...</Text>
</Translation>
<Translation>
<Keyword>TextId</Keyword>
<Text>Text:</Text>
</Translation>
<Translation>
<Keyword>UpdateId</Keyword>
<Text>Update</Text>
</Translation>
<Translation>
<Keyword>AddOnTopOfRefractoryId</Keyword>
<Text>Layer on
refractory</Text>
</Translation>
<Translation>
<Keyword>AddOnTopOfRefractoryToolTipId</Keyword>
<Text>Add the wax as a layer on the refractory instead of layering over existing wax.</Text>
</Translation>
<Translation>
<Keyword>EaseInId</Keyword>
<Text>Ease In</Text>
</Translation>
<Translation>
<Keyword>EaseInToolTipId</Keyword>
<Text>Produces a gradual falloff to the boundary over the distance specified.</Text>
</Translation>
<Translation>
<Keyword>RoundId</Keyword>
<Text>Round</Text>
</Translation>
<Translation>
<Keyword>LinearId</Keyword>
<Text>Linear</Text>
</Translation>
<Translation>
<Keyword>LinearToolTipId</Keyword>
<Text>Produces a linear falloff to the boundary over the distance specified</Text>
</Translation>
<Translation>
<Keyword>FalloffAngleId</Keyword>
<Text>Falloff angle</Text>
</Translation>
<Translation>
<Keyword>DistanceId</Keyword>
<Text>Distance</Text>
</Translation>
<Translation>
<Keyword>FalloffDistanceShortId</Keyword>
<Text>Falloff dist.</Text>
</Translation>
<Translation>
<Keyword>RoundToolTipId</Keyword>
<Text>Produces a rounded falloff to the boundary over the distance specified</Text>
</Translation>
<Translation>
<Keyword>EmbossDirectionSurfaceNormalId</Keyword>
<Text>Surface normal</Text>
</Translation>
<Translation>
<Keyword>EmbossDirectionAverageSurfaceNormalId</Keyword>
<Text>Average surface normal</Text>
</Translation>
<Translation>
<Keyword>EmbossDirectionInsertionAxisId</Keyword>
<Text>Insertion axis</Text>
</Translation>
<Translation>
<Keyword>DirectionId</Keyword>
<Text>Direction</Text>
</Translation>
<Translation>
<Keyword>NormalSmoothingId</Keyword>
<Text>Normal smoothing</Text>
</Translation>
<Translation>
<Keyword>NormalSmoothingToolTipId</Keyword>
<Text>Strength of normal smoothing</Text>
</Translation>
<Translation>
<Keyword>EmbossCurveAdvancedId</Keyword>
<Text>Emboss curve advanced</Text>
</Translation>
<Translation>
<Keyword>SelectEmbossCurveId</Keyword>
<Text>Click one or more end-connected curves that enclose an area of wax.</Text>
</Translation>
<Translation>
<Keyword>ClickInsideAreaToEmbossId</Keyword>
<Text>Click in the area to emboss.</Text>
</Translation>
<Translation>
<Keyword>EmbossPickCurveOperationId</Keyword>
<Text>Set the thickness, choose raise or lower, and apply to add or remove wax.</Text>
</Translation>
<Translation>
<Keyword>EmbossApplyingId</Keyword>
<Text>Modifying the model...</Text>
</Translation>
<Translation>
<Keyword>SelectPolyToolTipId</Keyword>
<Text>Select mesh area with ball</Text>
</Translation>
<Translation>
<Keyword>SelectPlaneToolToolTipId</Keyword>
<Text>Select mesh area with plane tool</Text>
</Translation>
<Translation>
<Keyword>SelectWithSeedToolTipId</Keyword>
<Text>Select mesh area with seed point</Text>
</Translation>
<Translation>
<Keyword>DeselectToolTipId</Keyword>
<Text>Remove triangles from selection</Text>
</Translation>
<Translation>
<Keyword>ClearSelectionToolTipId</Keyword>
<Text>Deselect all</Text>
</Translation>
<Translation>
<Keyword>TrimSelectModeId</Keyword>
<Text>Select polygons with the ball tool</Text>
</Translation>
<Translation>
<Keyword>TrimSelectModeNoMeshId</Keyword>
<Text>Scan mesh can only be trimmed before survey is applied.</Text>
</Translation>
<Translation>
<Keyword>ColorizeThicknessId</Keyword>
<Text>Colorize thickness:</Text>
</Translation>
<Translation>
<Keyword>RulerMessageId</Keyword>
<Text>Measure distance</Text>
</Translation>
<Translation>
<Keyword>RulerMessageToolTipId</Keyword>
<Text>Measures the distance between two points in the model</Text>
</Translation>
<Translation>
<Keyword>RulerMessageThicknessId</Keyword>
<Text>Measure thickness</Text>
</Translation>
<Translation>
<Keyword>RulerMessageThicknessToolTipId</Keyword>
<Text>Touch the location to measure</Text>
</Translation>
<Translation>
<Keyword>MinId</Keyword>
<Text>Min</Text>
</Translation>
<Translation>
<Keyword>MaxId</Keyword>
<Text>Max</Text>
</Translation>
<Translation>
<Keyword>ComputingThicknessColorsId</Keyword>
<Text>Computing thickness colors. Please wait...</Text>
</Translation>
<Translation>
<Keyword>BallSelectStartMsgId</Keyword>
<Text>Select wax with the tool</Text>
</Translation>
<Translation>
<Keyword>DeleteSelectionToolTipId</Keyword>
<Text>Delete selected wax</Text>
</Translation>
<Translation>
<Keyword>RemoveWaxMessageId</Keyword>
<Text>Removing wax. Please wait...</Text>
</Translation>
<Translation>
<Keyword>AddSelectionToBlockoutToolTipId</Keyword>
<Text>Add selection to block out wax</Text>
</Translation>
<Translation>
<Keyword>RemoveSelectionToBlockoutToolTipId</Keyword>
<Text>Remove selection from block out wax</Text>
</Translation>
<Translation>
<Keyword>FalloffId</Keyword>
<Text>Falloff</Text>
</Translation>
<Translation>
<Keyword>OpacityId</Keyword>
<Text>Opacity</Text>
</Translation>
<Translation>
<Keyword>LanguageSettingId</Keyword>
<Text>Language:</Text>
</Translation>
<Translation>
<Keyword>ApplyApronId</Keyword>
<Text>Apply apron:</Text>
</Translation>
<Translation>
<Keyword>OrId</Keyword>
<Text>Or</Text>
</Translation>
<Translation>
<Keyword>SelectPartialCadId</Keyword>
<Text>Select a PartialCad file:</Text>
</Translation>
<Translation>
<Keyword>LoadScanId</Keyword>
<Text>Load Scan</Text>
</Translation>
<Translation>
<Keyword>CloneThicknessPresetId</Keyword>
<Text>Presets:</Text>
</Translation>
<Translation>
<Keyword>CloneThickness1Id</Keyword>
<Text>Occlusal rest</Text>
</Translation>
<Translation>
<Keyword>CloneThickness1ToolTipId</Keyword>
<Text>Occlusal rest thickness (1)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness2Id</Keyword>
<Text>Lingual rest</Text>
</Translation>
<Translation>
<Keyword>CloneThickness2ToolTipId</Keyword>
<Text>Lingual rest thickness (2)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness3Id</Keyword>
<Text>Minor connector</Text>
</Translation>
<Translation>
<Keyword>CloneThickness3ToolTipId</Keyword>
<Text>Minor connector thickness (3)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness4Id</Keyword>
<Text>Connector</Text>
</Translation>
<Translation>
<Keyword>CloneThickness4ToolTipId</Keyword>
<Text>Major connector thickness (4)</Text>
</Translation>
<Translation>
<Keyword>CloneThickness5Id</Keyword>
<Text>Mesh</Text>
</Translation>
<Translation>
<Keyword>CloneThickness5ToolTipId</Keyword>
<Text>Mesh thickness (5)</Text>
</Translation>
<Translation>
<Keyword>ClickToPlaceCurvePointsId</Keyword>
<Text>Click To Place Curve Points</Text>
</Translation>
<Translation>
<Keyword>DentalProjectNotValidForPartialsId</Keyword>
<Text>It is best to specify at least one Partial framework tooth.
Without this no workflow, orientation, or material specific settings will be used.
[ In the DentalDB in options select material configurations 'Partial',
then apply a Partial framework to a tooth of the jaw you want to design on. ]</Text>
</Translation>
<Translation>
<Keyword>MissingAttachmentsId</Keyword>
<Text>The following attachments could not be located and will not be loaded:
%s
</Text>
</Translation>
<Translation>
<Keyword>CurveNameId</Keyword>
<Text>Curve</Text>
</Translation>
<Translation>
<Keyword>FinishLineCurveNumberNameId</Keyword>
<Text>Finish line curve %d</Text>
</Translation>
<Translation>
<Keyword>CloneThicknessEditId</Keyword>
<Text>Thickness of wax copied by the tool (If the thickness exceeds that of the piece, the difference will form a gap.)</Text>
</Translation>
<Translation>
<Keyword>CurveEditPointMessageId</Keyword>
<Text>Click on the curve to insert an edit point or click on an edit point to delete it</Text>
</Translation>
<Translation>
<Keyword>ComputingMaskVolumeId</Keyword>
<Text>Computing mask volume</Text>
</Translation>
<Translation>
<Keyword>DetermineGpuBoundId</Keyword>
<Text>Determining Boundary</Text>
</Translation>
<Translation>
<Keyword>SettingupGpuId</Keyword>
<Text>Setting up Gpu</Text>
</Translation>
<Translation>
<Keyword>SnapMeshToTargetDepthId</Keyword>
<Text>Snap springloaded mesh to target depth</Text>
</Translation>
<Translation>
<Keyword>RelieveImportedId</Keyword>
<Text>Add Blockout relief</Text>
</Translation>
<Translation>
<Keyword>ApplyReliefToImportedId</Keyword>
<Text>Apply relief</Text>
</Translation>
<Translation>
<Keyword>ImportedReliefAMountId</Keyword>
<Text>Relief</Text>
</Translation>
<Translation>
<Keyword>EditCurveId</Keyword>
<Text>Edit Curve</Text>
</Translation>
<Translation>
<Keyword>ClickCurveToEditId</Keyword>
<Text>Click a curve to edit</Text>
</Translation>
<Translation>
<Keyword>AdvancedLoggingId</Keyword>
<Text>Detailed log messages</Text>
</Translation>
<Translation>
<Keyword>ShowLogId</Keyword>
<Text>Save Log</Text>
</Translation>
<Translation>
<Keyword>IdExitProfileEditorFirst</Keyword>
<Text>Please exit the profile editor first</Text>
</Translation>
<Translation>
<Keyword>IdInvalidBound</Keyword>
<Text>There is no valid bound</Text>
</Translation>
<Translation>
<Keyword>IdInnerContourNotWithinOuter</Keyword>
<Text>The outer contour doesn't contain the inner contour curve</Text>
</Translation>
<Translation>
<Keyword>IdInnerContourAlreadyExists</Keyword>
<Text>An outer contour curve can only have one inner countour curve</Text>
</Translation>
<Translation>
<Keyword>IdNoOuterContourForInner</Keyword>
<Text>There is no outer contour for this inner contour curve</Text>
</Translation>
<Translation>
<Keyword>FillImportedRefractoryToBottomId</Keyword>
<Text>Fill Imported Part to Bottom</Text>
</Translation>
<Translation>
<Keyword>FeaturePreviewId</Keyword>
<Text>Pre-release features</Text>
</Translation>
<Translation>
<Keyword>ResizingWorkspaceId</Keyword>
<Text>The workspace is being resized, please wait..</Text>
</Translation>
<Translation>
<Keyword>RefractoryNeedsToBeVisibleToApplyId</Keyword>
<Text>The refractory needs to be visible before you apply</Text>
</Translation>
<Translation>
<Keyword>SoftwareEULAInformation</Keyword>
<Text>By activating or using this software, you acknowledge the existence of a binding EULA,
based on which this product has been delivered and sublicensed by a distributor entitled by exocad GmbH,
and that anonymous user statistics might be collected in the software for improving the software experience.
In particular, you acknowledge that the sublicense is a „per seat“ license that is limited to one user and computer at a time.
(Note: Sending the statistics to exocad is a separate, optional step and is disabled by default)</Text>
</Translation>
<Translation>
<Keyword>AllowSendingStatisticsId</Keyword>
<Text>Permission to send statistics.</Text>
</Translation>
<Translation>
<Keyword>Permission_To_Send_Statistic_To_Development_Team_ToolTip</Keyword>
<Text>Allow sending advanced anonymous usage statistics to help the development team to fix and improve products and service.
Note: The statistics are anonymous, i.e. no patient or medical data is transfered.</Text>
</Translation>
<Translation>
<Keyword>ShowStatisticsInfoId</Keyword>
<Text>Show Info</Text>
</Translation>
<Translation>
<Keyword>SendStatisticsNowId</Keyword>
<Text>Send Now</Text>
</Translation>
<Translation>
<Keyword>StatisticsId</Keyword>
<Text>Statistics</Text>
</Translation>
<Translation>
<Keyword>InvertStippleId</Keyword>
<Text>Invert pattern</Text>
</Translation>
<Translation>
<Keyword>ApplyOverWaxId</Keyword>
<Text>Apply over wax</Text>
</Translation>
<Translation>
<Keyword>SurveyAutoReduceScanId</Keyword>
<Text>Auto reduce scan</Text>
</Translation>
<Translation>
<Keyword>SurveyAutoReduceScanToolTipId</Keyword>
<Text>A reduced scan size will improve overall performance.
However sometimes you may wish to disable if too much data is removed</Text>
</Translation>
<Translation>
<Keyword>SurveyBlockOutUndercutsToolTipId</Keyword>
<Text>Block out undercuts</Text>
</Translation>
<Translation>
<Keyword>ConnectorReliefEdgeFalloffId</Keyword>
<Text>Connector margin width</Text>
</Translation>
<Translation>
<Keyword>EnableAutoReliefId</Keyword>
<Text>Enable relief</Text>
</Translation>
<Translation>
<Keyword>SaveEditedBlockoutId</Keyword>
<Text>With edited blockout</Text>
</Translation>
<Translation>
<Keyword>EndPostId</Keyword>
<Text>End Thickness</Text>
</Translation>
<Translation>
<Keyword>UseFileId</Keyword>
<Text>Use File</Text>
</Translation>
<Translation>
<Keyword>UsePostId</Keyword>
<Text>Use Post</Text>
</Translation>
</Translations>
</TranslationContainer>

<TranslationContainer>
<Translations>
    <Translation>
      <Keyword>missingResoureDllID</Keyword>
      <Text>Install Problem: missing resource DLL</Text>
    </Translation>
  <Translation>
    <Keyword>ProblemWithNumericInputId</Keyword>
    <Text>Problem with number</Text>
  </Translation>
  <Translation>
    <Keyword>skipNextWizardStepsId</Keyword>
    <Text>Do you wish to skip these steps?</Text>
  </Translation>
  <Translation>
    <Keyword>skipNextWizardStepId</Keyword>
    <Text>Do you wish to skip this step?</Text>
  </Translation>
  <Translation>
    <Keyword>requiresClosedCurveId</Keyword>
    <Text>%s requires a closed curve loop</Text>
  </Translation>
  <Translation>
    <Keyword>requiresOpenCurveId</Keyword>
    <Text>%s requires an open curve</Text>
  </Translation>
  <Translation>
    <Keyword>PartialsWorkflowModifierTagId</Keyword>
    <Text>PartialsWorkflowModifier tag not found in %s</Text>
  </Translation>
  <Translation>
    <Keyword>WorkflowBeforeAfterErrorId</Keyword>
    <Text>Don't use both "Before" and "After"
in RemoveWorkflowStep in %s</Text>
  </Translation>
  <Translation>
    <Keyword>WorkflowBeforeAfterErrorInAddId</Keyword>
    <Text>Don't use both "Before" and "After"
in AddWorkflowStep in %s</Text>
  </Translation>
  <Translation>
    <Keyword>WorkflowMustSpecifyBeforeOrAfterInAddId</Keyword>
    <Text>Must specify either "Before" or "After"
in AddWorkflowStep in %s</Text>
  </Translation>
  <Translation>
    <Keyword>MissingRemoveWorkflowStepErrorId</Keyword>
    <Text>RemoveWorkflowStep %s in %s was not found in wizard steps</Text>
  </Translation>
  <Translation>
    <Keyword>AddWorkflowStepNotFound</Keyword>
    <Text>AddWorkflowStep %s in %s was not found in wizard steps</Text>
  </Translation>
  <Translation>
    <Keyword>UnableToGenerateKeyboardMappingsId</Keyword>
    <Text>Unable to generate the CurrentKeyMappings html file</Text>
  </Translation>
  <Translation>
    <Keyword>BuildPieceCouldNotBeCreatedId</Keyword>
    <Text>The build piece could not be created.</Text>
  </Translation>
  <Translation>
    <Keyword>DentallabExitFileDirtyId</Keyword>
    <Text>The model for the current job has not been saved.
Do you wish to save it before exiting?</Text>
  </Translation>
  <Translation>
    <Keyword>VirtualModelErrorId</Keyword>
    <Text>The virtual model could not be created.</Text>
  </Translation>
  <Translation>
    <Keyword>RemoveAllScanFilesId</Keyword>
    <Text>Remove all scan files from this project?
(scan files from folder \"%s\" directory will also be removed)</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileWriteDiskFullId</Keyword>
    <Text>Unable to save file. Check to make sure that the directory exists,
is accessible and has space available.</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileReadIncompleteId</Keyword>
    <Text>Error reading file - file is incomplete.</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileReadcorruptId</Keyword>
    <Text>The selected file cannot be read. It may not be a valid file, it may be a corrupted file, or it may have been created in a newer version.</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileWriteId</Keyword>
    <Text>Error writing file</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileReadBadExtensionId</Keyword>
    <Text>Error reading file - bad file extension.</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileWriteBadExtensionId</Keyword>
    <Text>Error writing file - bad extension.</Text>
  </Translation>
  <Translation>
    <Keyword>LoadUndoOpErrorId</Keyword>
    <Text>Unable to read history from disk. Cannot undo/redo last operation.</Text>
  </Translation>
  <Translation>
    <Keyword>SaveUndoOpErrorId</Keyword>
    <Text>Unable to save history to disk - you will not be able to undo the last operation.
Verify that you have space on your drive and that the temporary directory is present.</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileReadId</Keyword>
    <Text>Error reading file</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileSaveId</Keyword>
    <Text>File not saved.
Unable to save a temporary copy of the file.
The temporary directory may be full or it may not have write permissions.</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorFileWriteTempFullId</Keyword>
    <Text>Unable to save a temporary copy of the file. The temporary directory may be full or it may not exist.</Text>
  </Translation>
  <Translation>
    <Keyword>AskToSaveId</Keyword>
    <Text>The file '%s' has been modified.
Would you like to save it?</Text>
  </Translation>
  <Translation>
    <Keyword>UnableToCreateFolderFreeformPalettesId</Keyword>
    <Text>Unable to create folder for palettes in temp directory.</Text>
  </Translation>
  <Translation>
    <Keyword>CustomToolSameNameAsStandardLoopId</Keyword>
    <Text>The tool name "StandardLoop1" is already in use by one of the standard tools. Please choose another name.</Text>
  </Translation>
  <Translation>
    <Keyword>CustomToolSameNameAsStandardAngleId</Keyword>
    <Text>The tool name "StandardAngle1" is already in use by one of the standard tools. Please choose another name.</Text>
  </Translation>
  <Translation>
    <Keyword>TooManySavedViewsId</Keyword>
    <Text>You have 50 views saved. You must delete a saved view to save a new view.</Text>
  </Translation>
  <Translation>
    <Keyword>UnexpectedErrorLoadingFileId</Keyword>
    <Text>Unexpected error loading file:
"%s"</Text>
  </Translation>
  <Translation>
    <Keyword>ResourcesFailedToLoadId</Keyword>
    <Text>The main application resource file could not be found. You may need to reinstall the software.</Text>
  </Translation>
  <Translation>
    <Keyword>RequireFullColorId</Keyword>
    <Text>Full color (32 bit) mode is strongly recommended. Please adjust your display properties and restart the application.</Text>
  </Translation>
  <Translation>
    <Keyword>InvalidParamInstallationProblemDbToPartialId</Keyword>
    <Text>Installation problem
Invalid parameter matching in \"config\\dbtopartialappmap.xml\".
The parameter name \"%s\" is unknown.</Text>
  </Translation>
  <Translation>
    <Keyword>MissingParamInstallationProblemDbToPartialId</Keyword>
    <Text>Installation problem
Missing parameter linkage in \"config\\dbtopartialappmap.xml".
The parameter name \"%s\" has no partial equivalent defined.</Text>
  </Translation>
  <Translation>
    <Keyword>PartialAndAntagonistOnSameJawId</Keyword>
    <Text>Antagonist and partial denture should not both be %s.</Text>
  </Translation>
  <Translation>
    <Keyword>InconsistentDbSettingsId</Keyword>
    <Text>Job settings are inconsistent between tooth %s and %s.
Partial framework reconstructions should use the same material and parameters.
Do you wish to return to the DB to fix this?</Text>
  </Translation>
  <Translation>
    <Keyword>MissingImportedPartFileId</Keyword>
    <Text>Imported part file "%s"
specified but not found. Skipping...</Text>
  </Translation>
  <Translation>
    <Keyword>WhatIsTypeOfThisScanFileId</Keyword>
    <Text>The scan file found in the folder:
\"%s\".
Appears to be the wrong type for the project.
Do you want to manually select a scan or cancel loading this scene?</Text>
  </Translation>
  <Translation>
    <Keyword>DoYouWantToRevertId</Keyword>
    <Text>Do you want to revert to the saved '%s'?</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorNoValidGeometryId</Keyword>
    <Text>Error loading file.
Either there is no valid geometry in the file for the options selected, or the file is corrupt.</Text>
  </Translation>
  <Translation>
    <Keyword>CloneBlockoutWarningId</Keyword>
    <Text>To avoid clearing the current 'Limit to depth' setting,
do you wish to automatically switch to 'Layer on refractory only' mode?</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossPreviewFailedId</Keyword>
    <Text>Preview for emboss failed.
You may not have enough memory to perform the preview.</Text>
  </Translation>
  <Translation>
    <Keyword>FixdraftErrFailureId</Keyword>
    <Text>The FixDraft operation failed.</Text>
  </Translation>
  <Translation>
    <Keyword>FixDraftErrBadInputsId</Keyword>
    <Text>The FixDraft operation failed because one or more of the input parameters were invalid.
Please verify the inputs and repeat the operation.</Text>
  </Translation>
  <Translation>
    <Keyword>FixdraftErrGrowWorkspaceFailedId</Keyword>
    <Text>The FixDraft operation failed because the requested draft angle may cause the model to grow to a size that would exceed available memory.
Please reduce the draft angle or modify the draft mode.</Text>
  </Translation>
  <Translation>
    <Keyword>FixdraftErrTempVolAllocFailedId</Keyword>
    <Text>Insufficient memory available to perform the FixDraft operation.</Text>
  </Translation>
  <Translation>
    <Keyword>UnableToLoadImageFileId</Keyword>
    <Text>Unable to load image file</Text>
  </Translation>
  <Translation>
    <Keyword>NurbsCurveCreateErrorId</Keyword>
    <Text>The curve was not placed. The points may be too far apart for the curve to fit properly.</Text>
  </Translation>
  <Translation>
    <Keyword>NonCurveLoopSelectedId</Keyword>
    <Text>The selected curves don't form a closed loop.</Text>
  </Translation>
  <Translation>
    <Keyword>YellowZoneWorkspaceId</Keyword>
    <Text>This operation may require more memory than your computer has.
If you proceed, save your work often since exceeding memory may lead to unpredictable problems.</Text>
  </Translation>
  <Translation>
    <Keyword>RedZoneWorkspaceId</Keyword>
    <Text>This workspace requires too much memory.</Text>
  </Translation>
  <Translation>
    <Keyword>UnableToCreatNewDocId</Keyword>
    <Text>Unable to create a new document.</Text>
  </Translation>
  <Translation>
    <Keyword>ZeroOrLessWorkspaceId</Keyword>
    <Text>Negative values or zero are not a valid choice for width, height, depth, diameter, or edge sharpness.</Text>
  </Translation>
  <Translation>
    <Keyword>ResampleReallyDownsampleId</Keyword>
    <Text>Changing to this coarser wax setting will cause a loss of detail.
Are you sure you want to proceed?</Text>
  </Translation>
  <Translation>
    <Keyword>ResizeWorkspaceEmptyWsMinimizeId</Keyword>
    <Text>An empty work area cannot be minimized.</Text>
  </Translation>
  <Translation>
    <Keyword>EdgeSharpnessId</Keyword>
    <Text>Wax resolution is too high.</Text>
  </Translation>
  <Translation>
    <Keyword>OpenFileMemoryWarningId</Keyword>
    <Text>This model requires more memory than your computer has. If you proceed, save your work often since exceeding memory will lead to unpredictable problems.
Would you like to proceed?</Text>
  </Translation>
  <Translation>
    <Keyword>MultipleFileFormatOnlyStlId</Keyword>
    <Text>Multiple file import is only supported for STL files.</Text>
  </Translation>
  <Translation>
    <Keyword>UnknownFileTypeId</Keyword>
    <Text>Unknown file type</Text>
  </Translation>
  <Translation>
    <Keyword>ProfileNotFoundId</Keyword>
    <Text>The profile: "%s"
could not be found.
    </Text>
  </Translation>
  <Translation>
    <Keyword>BadProfileId</Keyword>
    <Text>This profile is invalid.
The outline must be a closed curve.</Text>
  </Translation>
  <Translation>
    <Keyword>BadProfileXId</Keyword>
    <Text>This profile is invalid.
The outline is missing the horizontal line at the bottom.</Text>
  </Translation>
  <Translation>
    <Keyword>BadProfileFillId</Keyword>
    <Text>The profile could not be applied with the current settings.</Text>
  </Translation>
  <Translation>
    <Keyword>BadProfileEndcapsId</Keyword>
    <Text>The profile endcaps could not be applied with the current settings.</Text>
  </Translation>
  <Translation>
    <Keyword>UnfitCurveId</Keyword>
    <Text>The selected curve could not be used.
Curves must be fit to the surface.</Text>
  </Translation>
  <Translation>
    <Keyword>ShapeErrorFailedToCreatePatchId</Keyword>
    <Text>The wax may be too bumpy to shape or the boundary curves may be too irregular to enclose an area of wax.
Use the option to fit sections to boundaries only or edit the boundary curves.</Text>
  </Translation>
  <Translation>
    <Keyword>FillerApplyFailedId</Keyword>
    <Text>Failed to commit the filler surface to the wax.</Text>
  </Translation>
  <Translation>
    <Keyword>GpuSetupErrorId</Keyword>
    <Text>There was a problem with the graphics hardware acceleration initialization.</Text>
  </Translation>
  <Translation>
    <Keyword>GpuBoundsErrorId</Keyword>
    <Text>There was a problem with the bounds setup for the graphics hardware acceleration initialization.</Text>
  </Translation>
  <Translation>
    <Keyword>GpuNotEnabledId</Keyword>
    <Text>Hardware acceleration must be enabled to use this feature.</Text>
  </Translation>
  <Translation>
    <Keyword>GpuMemErrorId</Keyword>
    <Text>The use of hardware acceleration with this model exceeds the memory limits of the graphics card.</Text>
  </Translation>
  <Translation>
    <Keyword>BadMeshId</Keyword>
    <Text>The chosen pattern could not be used.</Text>
  </Translation>
  <Translation>
    <Keyword>OutlineCurvesNotJoinedAtEndpointsId</Keyword>
    <Text>The connector outline curves are not joined at the end points.</Text>
  </Translation>
  <Translation>
    <Keyword>NoMajorConnectorCurveFoundId</Keyword>
    <Text>No major connector curve found.</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorSelectCurvesId</Keyword>
    <Text>First, select the outer curve loop defining the wax area, then, if desired, an inner curve loop to create a hole.</Text>
  </Translation>
  <Translation>
    <Keyword>ConnectorAreaNotEmbossedId</Keyword>
    <Text>The connector area could not be embossed.</Text>
  </Translation>
  <Translation>
    <Keyword>ConnectorHoleCurvesNotJoinedId</Keyword>
    <Text>The connector hole curves are not joined at the end points.</Text>
  </Translation>
  <Translation>
    <Keyword>ConnectorHoleNotCreatedId</Keyword>
    <Text>The connector hole could not be created.</Text>
  </Translation>
  <Translation>
    <Keyword>MeshPreviewFailedId</Keyword>
    <Text>The preview could not be created for the selected mesh areas.</Text>
  </Translation>
  <Translation>
    <Keyword>MeshPreviewErrorId</Keyword>
    <Text>The preview could not be created for all the selected mesh areas.</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserApplyFailedId</Keyword>
    <Text>The wax could not be created.</Text>
  </Translation>
  <Translation>
    <Keyword>FalloffApplyFailedId</Keyword>
    <Text>The connector edge falloff could not be applied due to overlapping curve regions.
This can be avoided by applying each overlapping region sequentially rather than simultaneously.</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserErrorSnipFailedId</Keyword>
    <Text>The mesh preview could not be generated.</Text>
  </Translation>
  <Translation>
    <Keyword>DirtyProfileWarningLockedId</Keyword>
    <Text>The current profile has been modified.
This is a locked standard profile.
If you wish to save the changes, press 'Save as'.
Do you wish to discard the changes?</Text>
  </Translation>
  <Translation>
    <Keyword>DirtyProfileWarningId</Keyword>
    <Text>The current profile has been modified, but not saved.
Do you wish to return to the 'Edit profile' screen to save your changes?</Text>
  </Translation>
  <Translation>
    <Keyword>DeleteProfileWarningId</Keyword>
    <Text>Are you sure you want to delete this custom profile?</Text>
  </Translation>
  <Translation>
    <Keyword>DeleteProfileErrorId</Keyword>
    <Text>Error deleting profile</Text>
  </Translation>
  <Translation>
    <Keyword>BarFailedGenericId</Keyword>
    <Text>The current profile orientation choice doesn't work with the selected curve.</Text>
  </Translation>
  <Translation>
    <Keyword>BadProfileCenterId</Keyword>
    <Text>This profile is invalid.
The outline does not contain the plane center.</Text>
  </Translation>
  <Translation>
    <Keyword>SelectSketchPlaneId</Keyword>
    <Text>Please use a closed loop profile.</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyColorUndercutErrorId</Keyword>
    <Text>Failed to generate the undercut coloring.</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyApplyWarningId</Keyword>
    <Text>Do you wish to apply the 'Survey tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyNoMeshFoundId</Keyword>
    <Text>Can't find an input mesh for survey.</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyBlockoutErrorId</Keyword>
    <Text>Failed to generate refractory model and blockout wax.</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyFinishErrorId</Keyword>
    <Text>Failed to complete surveying of the blocked out model.</Text>
  </Translation>
  <Translation>
    <Keyword>ConstrainedTugNotOnSurfaceId</Keyword>
    <Text>The selected curves do not lie near the surface of the wax.
Please fit the curves to the wax.</Text>
  </Translation>
  <Translation>
    <Keyword>ConstrainedTugPendingId</Keyword>
    <Text>Clear or apply the existing tug.</Text>
  </Translation>
  <Translation>
    <Keyword>ConstrainedTugSplitFailedId</Keyword>
    <Text>The selected curve loop may be too small for this operation. Try clicking farther from the edge of the curve.
If this does not work, make the curve loop bigger or increase the wax coarseness of the piece.</Text>
  </Translation>
  <Translation>
    <Keyword>FloatingPointOnFitCurveWarningId</Keyword>
    <Text>Floating a curve point on a 'fit to surface' curve.
This will produce an unexpected result.</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyPostToolId</Keyword>
    <Text>Do you wish to apply the 'Post tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>CantFindRegisteredToolId</Keyword>
    <Text>Can't find registered tool %s.</Text>
  </Translation>
  <Translation>
    <Keyword>CouldNotFillToPlaneId</Keyword>
    <Text>Could not fill to plane.</Text>
  </Translation>
  <Translation>
    <Keyword>NoBitmapToSaveId</Keyword>
    <Text>No bitmap image attached.
File save cancelled.</Text>
  </Translation>
  <Translation>
    <Keyword>CantSaveBitmapWithZeroDimensionId</Keyword>
    <Text>Bitmap has zero width and/or zero height.
File save cancelled.</Text>
  </Translation>
  <Translation>
    <Keyword>UnsupportedBitmapSaveOperationId</Keyword>
    <Text>Unsupported operation saving this bitmap.
Save has been canceled</Text>
  </Translation>
  <Translation>
    <Keyword>CantOpenBitmapForWriteId</Keyword>
    <Text>Error opening bitmap file for write.
File save cancelled.</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyClaspNowId</Keyword>
    <Text>Do you wish to apply the 'Clasp tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyFinishlineNowId</Keyword>
    <Text>Do you wish to apply the 'Finish line tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>ModelTooLargeForGPUId</Keyword>
    <Text>This model is too large to be processed in GPU.
Currently there is %dMb of GPU memory in use.
You can improve this by closing or reducing the window size of any other 3D applications.</Text>
  </Translation>
  <Translation>
    <Keyword>IgnoringUnfitCurvesId</Keyword>
    <Text>There are curve loops present that do not fit to the surface.
These will be ignored by this tool.</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyMajorConnectorNowId</Keyword>
    <Text>Do you wish to apply the 'Major connector tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>NeedToPreviewAndAPplyMeshConnectorId</Keyword>
    <Text>You still need to preview and apply the 'Mesh connector tool'.
Would you like to do that now?</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyMeshConnectorNowId</Keyword>
    <Text>Do you wish to apply the 'Mesh connector tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyMeshRiserToolNowId</Keyword>
    <Text>Do you wish to apply the 'Mesh riser tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>GpuVolumeNotFoundId</Keyword>
    <Text>GPU volume not found</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyBarToolId</Keyword>
    <Text>Do you wish to apply the 'Bar tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>SaveForBuildNowId</Keyword>
    <Text>Do you wish to save for build now?</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyPipeNowId</Keyword>
    <Text>Do you wish to apply the 'Pipe tool' now?</Text>
  </Translation>
  <Translation>
    <Keyword>FinishInProgressCurveId</Keyword>
    <Text>Please finish the current curve first.</Text>
  </Translation>
  <Translation>
    <Keyword>CantUndoId</Keyword>
    <Text>Can't undo.</Text>
  </Translation>
  <Translation>
    <Keyword>SaveDisabledDuringBlockoutId</Keyword>
    <Text>Due to special scene state:
Saving disabled in 'Edit blockout'.
Please leave this tool before saving.
    </Text>
  </Translation>
  <Translation>
    <Keyword>CouldNotFindRefractoryId</Keyword>
    <Text>Error: Could not find refactory.</Text>
  </Translation>
  <Translation>
    <Keyword>FileHasChangedSaveItFirstId</Keyword>
    <Text>The current file has changed.
Do you want to save it first?</Text>
  </Translation>
  <Translation>
    <Keyword>MeshCurvesNotDeletingScaneDisabledId</Keyword>
    <Text>This project has partial mesh curves: Deleting of scan meshes disabled.</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectoraNotDeletingScaneDisabledId</Keyword>
    <Text>This project has major connector curves: Deleting of scan meshes disabled.</Text>
  </Translation>
  <Translation>
    <Keyword>WaxDataNotDeletingScaneDisabledId</Keyword>
    <Text>This project has wax data: Deleting of scan meshes disabled.</Text>
  </Translation>
  <Translation>
    <Keyword>NoScanMeshId</Keyword>
    <Text>Did not find any scan meshes in the scene.</Text>
  </Translation>
  <Translation>
    <Keyword>ProblemExportingId</Keyword>
    <Text>There was a problem with exporting.</Text>
  </Translation>
  <Translation>
    <Keyword>NoSceneFoudErrorId</Keyword>
    <Text>No scene found.</Text>
  </Translation>
  <Translation>
    <Keyword>DuplicateContextNameErrorId</Keyword>
    <Text>Duplicate context installation error:
%s</Text>
  </Translation>
  <Translation>
    <Keyword>WorkOnUpperOrLowerId</Keyword>
    <Text>This case has a partial in the lower and the upper jaw.
Which one you want to work on?</Text>
  </Translation>
  <Translation>
    <Keyword>AntagonistErrorId</Keyword>
    <Text>Error: Antagonist teeth found on both jaws.</Text>
  </Translation>
  <Translation>
    <Keyword>UnregisteredScanWarningId</Keyword>
    <Text>Warning!
The scan file needs to be registered.
Please load the project in the main exocad app to register.</Text>
  </Translation>
  <Translation>
    <Keyword>FailedToCopyAntagonistFileId</Keyword>
    <Text>Failed to copy antagonist file.</Text>
  </Translation>
  <Translation>
    <Keyword>FailedToCopyTextureFileId</Keyword>
    <Text>Failed to copy texture file.</Text>
  </Translation>
  <Translation>
    <Keyword>FoundUnregisteredAntagonistId</Keyword>
    <Text>Warning!
The antagonist needs to be registered.
Please load the project in the main exocad app to register.</Text>
  </Translation>
  <Translation>
    <Keyword>ConvertWaterTightToMillingWarningId</Keyword>
    <Text>Converting parts to 3D printing that were optimized for milling may reduce accuracy.
Are you sure you want to do this?</Text>
  </Translation>
  <Translation>
    <Keyword>ConvertWaterTightToMillingChangeProjectWarningId</Keyword>
    <Text>Note: With these imported parts/settings, the output file may not be suitable for 3D printing.
Change production mode to milling?
    </Text>
  </Translation>
  <Translation>
    <Keyword>ApplyImportedPartsNowId</Keyword>
    <Text>Do you wish to apply the parts now?</Text>
  </Translation>
  <Translation>
    <Keyword>NeedSurveyBeforeImportedPartsId</Keyword>
    <Text>Please complete the survey step before adding imported parts.</Text>
  </Translation>
  <Translation>
    <Keyword>ChangeProjectToOptimizedForMillingId</Keyword>
    <Text> Note: This imported part was optimized for milling, yet this project is optimized for watertightness.
Would you like to change the project optimization to milling?</Text>
  </Translation>
  <Translation>
    <Keyword>TheInnerObjectAlreadyExistsId</Keyword>
    <Text>The inner object "%s" already exists.
If you want to convert it to refractory,
make sure it is active and press "Convert to wax".</Text>
  </Translation>
  <Translation>
    <Keyword>NoInnerTrianglesFoundId</Keyword>
    <Text>No inner triangles found.
No inner object could be created.
This option only works on exocad generated files.</Text>
  </Translation>
  <Translation>
    <Keyword>CurveEditErrorId</Keyword>
    <Text>The curve(s) could not be fitted to the object.
Either the object was deleted, made invisible,
or its surface was too far away.
    </Text>
  </Translation>
  <Translation>
    <Keyword>CurveFitFailureId</Keyword>
    <Text>Curve fitting failed, please try again using more control points to place the curve closer to the surface.</Text>
  </Translation>
  <Translation>
    <Keyword>CurveReplaceModeUsageId</Keyword>
    <Text>When replacing a curve segment, start and end the segment with a single click on an existing curve.</Text>
  </Translation>
  <Translation>
    <Keyword>OKId</Keyword>
    <Text>OK</Text>
  </Translation>
  <Translation>
    <Keyword>CancelId</Keyword>
    <Text>Cancel</Text>
  </Translation>
  <Translation>
    <Keyword>YesId</Keyword>
    <Text>Yes</Text>
  </Translation>
  <Translation>
    <Keyword>NoId</Keyword>
    <Text>No</Text>
  </Translation>
  <Translation>
    <Keyword>RetryId</Keyword>
    <Text>Retry</Text>
  </Translation>
  <Translation>
    <Keyword>AbortId</Keyword>
    <Text>Abort</Text>
  </Translation>
  <Translation>
    <Keyword>UpperId</Keyword>
    <Text>Upper</Text>
  </Translation>
  <Translation>
    <Keyword>LowerId</Keyword>
    <Text>Lower</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyTooltipId</Keyword>
    <Text>Survey</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyDescriptionId</Keyword>
    <Text>Generate refractory model from scanned mesh and block out undercuts.</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothFeatureTooltipId</Keyword>
    <Text>Edit wax</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothFeatureDescriptionId</Keyword>
    <Text>Smooth and smudge wax</Text>
  </Translation>
  <Translation>
    <Keyword>MeshConnectorTooltipId</Keyword>
    <Text>Mesh connector</Text>
  </Translation>
  <Translation>
    <Keyword>MeshConnectorDescriptionId</Keyword>
    <Text>Apply mesh and major connector</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothAreaTooltipId</Keyword>
    <Text>Smooth area</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothAreaDescriptionId</Keyword>
    <Text>Smooth an area or the entire model</Text>
  </Translation>
  <Translation>
    <Keyword>SmudgeBlockoutTooltipId</Keyword>
    <Text>Edit blockout</Text>
  </Translation>
  <Translation>
    <Keyword>SmudgeBlockoutDescriptionId</Keyword>
    <Text>Push or pull (shift) wax with a ball tool</Text>
  </Translation>
  <Translation>
    <Keyword>TugTooltipId</Keyword>
    <Text>Tug</Text>
  </Translation>
  <Translation>
    <Keyword>TugDescriptionId</Keyword>
    <Text>Modify wax by tugging an area</Text>
  </Translation>
  <Translation>
    <Keyword>PipeTooltipId</Keyword>
    <Text>Pipe</Text>
  </Translation>
  <Translation>
    <Keyword>PipeDescriptionId</Keyword>
    <Text>Create a pipe along one or more curves</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossWithCurveTooltipId</Keyword>
    <Text>Emboss with curve</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossWithCurveDescriptionId</Keyword>
    <Text>Raise or lower wax enclosed by a curve</Text>
  </Translation>
  <Translation>
    <Keyword>RetentionBeadTooltipId</Keyword>
    <Text>Retention beads</Text>
  </Translation>
  <Translation>
    <Keyword>RetentionBeadDescriptionId</Keyword>
    <Text>Add retention beads on a surface area bounded by a curve</Text>
  </Translation>
  <Translation>
    <Keyword>AddPostTooltipId</Keyword>
    <Text>Add post</Text>
  </Translation>
  <Translation>
    <Keyword>AddPostDescriptionId</Keyword>
    <Text>Add post to the model</Text>
  </Translation>
  <Translation>
    <Keyword>FixDraftSelectionTooltipId</Keyword>
    <Text>Secondary blockout</Text>
  </Translation>
  <Translation>
    <Keyword>FixDraftSelectionDescriptionId</Keyword>
    <Text>Add wax in the selected area with a specified blockout angle</Text>
  </Translation>
  <Translation>
    <Keyword>BarTooltipId</Keyword>
    <Text>Bar</Text>
  </Translation>
  <Translation>
    <Keyword>BarDescriptionId</Keyword>
    <Text>Add wax by sweeping a profile along a curve</Text>
  </Translation>
  <Translation>
    <Keyword>FillerTooltipId</Keyword>
    <Text>Filler</Text>
  </Translation>
  <Translation>
    <Keyword>FillerDescriptionId</Keyword>
    <Text>Fills area inside a curve loop with wax</Text>
  </Translation>
  <Translation>
    <Keyword>PaintFillerTooltipId</Keyword>
    <Text>Paint filler</Text>
  </Translation>
  <Translation>
    <Keyword>PaintFillerDescriptionId</Keyword>
    <Text>Fills a paint-selected area with wax</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossAreaTooltipId</Keyword>
    <Text>Emboss with image or text</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossAreaDescriptionId</Keyword>
    <Text>Raise or lower wax with a projected image</Text>
  </Translation>
  <Translation>
    <Keyword>CloneTooltipId</Keyword>
    <Text>Clone</Text>
  </Translation>
  <Translation>
    <Keyword>CloneDescriptionId</Keyword>
    <Text>Add wax with constant thickness by tracing mouse on the surface</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspTooltipId</Keyword>
    <Text>Clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspDescriptionId</Keyword>
    <Text>Apply clasp</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserTooltipId</Keyword>
    <Text>Mesh</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserDescriptionId</Keyword>
    <Text>Wrap a mesh pattern with a spacer underneath</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorTooltipId</Keyword>
    <Text>Connector</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorDescriptionId</Keyword>
    <Text>Create a connector based on a curve boundary loop</Text>
  </Translation>
  <Translation>
    <Keyword>WaxPonticsTooltipId</Keyword>
    <Text>Add parts</Text>
  </Translation>
  <Translation>
    <Keyword>WaxPonticsDescriptionId</Keyword>
    <Text>Add parts to the partial</Text>
  </Translation>
  <Translation>
    <Keyword>FinishLineTooltipId</Keyword>
    <Text>Finish line</Text>
  </Translation>
  <Translation>
    <Keyword>SaveForBuildTooltipId</Keyword>
    <Text>Prepare for build</Text>
  </Translation>
  <Translation>
    <Keyword>SaveForBuildDescriptionId</Keyword>
    <Text>Convert wax to STL for build</Text>
  </Translation>
  <Translation>
    <Keyword>MinorConnectorTooltipId</Keyword>
    <Text>Minor connector</Text>
  </Translation>
  <Translation>
    <Keyword>MinorConnectorDescriptionId</Keyword>
    <Text>Connect clasps to major connector</Text>
  </Translation>
  <Translation>
    <Keyword>DrawExoCurveTooltipId</Keyword>
    <Text>Curve</Text>
  </Translation>
  <Translation>
    <Keyword>DrawExoCurveDescriptionId</Keyword>
    <Text>Make a curve by clicking points on the model</Text>
  </Translation>
  <Translation>
    <Keyword>SelectClayWithBallTooltipId</Keyword>
    <Text>Select wax</Text>
  </Translation>
  <Translation>
    <Keyword>SelectClayWithBallDescriptionId</Keyword>
    <Text>Select wax with ball</Text>
  </Translation>
  <Translation>
    <Keyword>MaskTooltipId</Keyword>
    <Text>Mask</Text>
  </Translation>
  <Translation>
    <Keyword>MaskDescriptionId</Keyword>
    <Text>Mask wax with falloff</Text>
  </Translation>
  <Translation>
    <Keyword>MeasureWaxTooltipId</Keyword>
    <Text>Measure wax</Text>
  </Translation>
  <Translation>
    <Keyword>MeasureWaxDescriptionId</Keyword>
    <Text>Measure distance and thickness of wax</Text>
  </Translation>
  <Translation>
    <Keyword>TrimScanTooltipId</Keyword>
    <Text>Trim scan</Text>
  </Translation>
  <Translation>
    <Keyword>TrimScanDescriptionId</Keyword>
    <Text>Trim scan</Text>
  </Translation>
  <Translation>
    <Keyword>ExpertPaletteCaptionId</Keyword>
    <Text>Expert</Text>
  </Translation>
  <Translation>
    <Keyword>UtilityPaletteCaptionId</Keyword>
    <Text>Utilities</Text>
  </Translation>
  <Translation>
    <Keyword>BasicPaletteCaptionId</Keyword>
    <Text>Basic</Text>
  </Translation>
  <Translation>
    <Keyword>DrawBarandMeshNameId</Keyword>
    <Text>Draw bar and mesh</Text>
  </Translation>
  <Translation>
    <Keyword>DrawBarandMeshDescriptionId</Keyword>
    <Text>Make a curve by clicking points on the model</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyMeshNameId</Keyword>
    <Text>Apply mesh</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyMeshDescriptionId</Keyword>
    <Text>Draw outline for mesh, adjust settings, and apply</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyBarNameId</Keyword>
    <Text>Apply bar</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyBarDescriptionId</Keyword>
    <Text>Select curve, adjust settings, then apply</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyApronNameId</Keyword>
    <Text>Apply apron</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyApronDescriptionId</Keyword>
    <Text>Select curve, adjust settings, then apply</Text>
  </Translation>
  <Translation>
    <Keyword>DrawApronNameId</Keyword>
    <Text>Draw apron</Text>
  </Translation>
  <Translation>
    <Keyword>DrawApronDescriptionId</Keyword>
    <Text>Make a curve by clicking points on the model</Text>
  </Translation>
  <Translation>
    <Keyword>DrawConnectorNameId</Keyword>
    <Text>Draw connector</Text>
  </Translation>
  <Translation>
    <Keyword>DrawConnectorDescriptionId</Keyword>
    <Text>Make a curve by clicking points on the model</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyFlexiConnectorNameId</Keyword>
    <Text>Apply flexi connector</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyFlexiConnectorDescriptionId</Keyword>
    <Text>Select curve, adjust settings, then apply</Text>
  </Translation>
  <Translation>
    <Keyword>DrawIndentationAreaNameId</Keyword>
    <Text>Draw indentation areas for teeth</Text>
  </Translation>
  <Translation>
    <Keyword>DrawIndentationAreaDescriptionId</Keyword>
    <Text>Make a curve by clicking points on the model</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyIndentationNameId</Keyword>
    <Text>Apply indentation</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyIndentationDescriptionId</Keyword>
    <Text>Make indentation for teeth</Text>
  </Translation>
  <Translation>
    <Keyword>DrawSupportBarsNameId</Keyword>
    <Text>Draw support bars</Text>
  </Translation>
  <Translation>
    <Keyword>DrawSupportBarsDescriptionId</Keyword>
    <Text>Draw support bar across arch with unfit curves</Text>
  </Translation>
  <Translation>
    <Keyword>ApplySupportBarsNameId</Keyword>
    <Text>Apply support bars</Text>
  </Translation>
  <Translation>
    <Keyword>ApplySupportBarsDescriptionId</Keyword>
    <Text>Select curves and apply support bars</Text>
  </Translation>
  <Translation>
    <Keyword>AddPartNameId</Keyword>
    <Text>Add part</Text>
  </Translation>
  <Translation>
    <Keyword>AddPartDescriptionId</Keyword>
    <Text>Add parts to model</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyModelNameId</Keyword>
    <Text>Survey model</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyModelDescriptionId</Keyword>
    <Text>Set insertion path, then apply to blockout model</Text>
  </Translation>
  <Translation>
    <Keyword>EditBlockoutNameId</Keyword>
    <Text>Edit blockout</Text>
  </Translation>
  <Translation>
    <Keyword>EditBlockoutDescriptionId</Keyword>
    <Text>Expose undercuts in blockout, then add extra relief wax</Text>
  </Translation>
  <Translation>
    <Keyword>DrawConnectorandMeshNameId</Keyword>
    <Text>Draw connector and mesh</Text>
  </Translation>
  <Translation>
    <Keyword>DrawConnectorandMeshDescriptionId</Keyword>
    <Text>Draw major connector and mesh curves by clicking points on model</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyMeshConnectorNameId</Keyword>
    <Text>Apply mesh connector</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyMeshConnectorDescriptionId</Keyword>
    <Text>Preview mesh, then adjust and apply</Text>
  </Translation>
  <Translation>
    <Keyword>DrawClaspsNameId</Keyword>
    <Text>Draw clasps</Text>
  </Translation>
  <Translation>
    <Keyword>DrawClaspsDescriptionId</Keyword>
    <Text>Draw clasp curves by clicking points on the model</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyClaspNameId</Keyword>
    <Text>Apply clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyClaspDescriptionId</Keyword>
    <Text>Apply clasps: Select curve, adjust, and apply</Text>
  </Translation>
  <Translation>
    <Keyword>FillInWaxNameId</Keyword>
    <Text>Fill in wax (clone)</Text>
  </Translation>
  <Translation>
    <Keyword>FillInWaxDescriptionId</Keyword>
    <Text>Fill in and create rest seats, around mesh, distal minor connector</Text>
  </Translation>
  <Translation>
    <Keyword>DrawFinishLineNameId</Keyword>
    <Text>Draw finish line</Text>
  </Translation>
  <Translation>
    <Keyword>DrawFinishLineDescriptionId</Keyword>
    <Text>Create curve by clicking on the wax</Text>
  </Translation>
  <Translation>
    <Keyword>FinishLineNameId</Keyword>
    <Text>Finish line</Text>
  </Translation>
  <Translation>
    <Keyword>FinishLineDescriptionId</Keyword>
    <Text>Create finish line: Select curve, adjust, and apply</Text>
  </Translation>
  <Translation>
    <Keyword>EditWaxNameId</Keyword>
    <Text>Edit wax</Text>
  </Translation>
  <Translation>
    <Keyword>EditWaxDescriptionId</Keyword>
    <Text>Clean up the wax</Text>
  </Translation>
  <Translation>
    <Keyword>BuildNameId</Keyword>
    <Text>Build</Text>
  </Translation>
  <Translation>
    <Keyword>BuildDescriptionId</Keyword>
    <Text>Create STL file for export</Text>
  </Translation>
  <Translation>
    <Keyword>HelpMenuId</Keyword>
    <Text>Help</Text>
  </Translation>
  <Translation>
    <Keyword>LoadProjectMenuId</Keyword>
    <Text>Load project</Text>
  </Translation>
  <Translation>
    <Keyword>LoadSceneMenuId</Keyword>
    <Text>Load scene</Text>
  </Translation>
  <Translation>
    <Keyword>LoadJawMenuId</Keyword>
    <Text>Load jaw</Text>
  </Translation>
  <Translation>
    <Keyword>SettingsMenuId</Keyword>
    <Text>Settings</Text>
  </Translation>
  <Translation>
    <Keyword>GPUMenuId</Keyword>
    <Text>GPU</Text>
  </Translation>
  <Translation>
    <Keyword>AboutMenuId</Keyword>
    <Text>About</Text>
  </Translation>
  <Translation>
    <Keyword>SaveMenuId</Keyword>
    <Text>Save</Text>
  </Translation>
  <Translation>
    <Keyword>SaveAsMenuId</Keyword>
    <Text>Save as</Text>
  </Translation>
  <Translation>
    <Keyword>ShowHideGroupsMenuId</Keyword>
    <Text>Show/hide groups</Text>
  </Translation>
  <Translation>
    <Keyword>ShowHideScanColorsMenuId</Keyword>
    <Text>Show/hide scan colors</Text>
  </Translation>
  <Translation>
    <Keyword>SaveDraftedRefractoryMenuId</Keyword>
    <Text>Save drafted refractory</Text>
  </Translation>
  <Translation>
    <Keyword>SaveDraftedRefractoryWithBlockoutMenuId</Keyword>
    <Text>Save drafted refractory with blockout</Text>
  </Translation>
  <Translation>
    <Keyword>FDITwoDigitId</Keyword>
    <Text>FDITwoDigit</Text>
  </Translation>
  <Translation>
    <Keyword>UniversalNumberingSystemId</Keyword>
    <Text>UniversalNumberingSystem</Text>
  </Translation>
  <Translation>
    <Keyword>PalmerId</Keyword>
    <Text>Palmer</Text>
  </Translation>
  <Translation>
    <Keyword>SceneFileAlreadyExistsId</Keyword>
    <Text>There is already a scene file "%s"
in the project directory.</Text>
  </Translation>
  <Translation>
    <Keyword>SettingsDialogTitleId</Keyword>
    <Text>Settings (may require relaunch to take effect)</Text>
  </Translation>
  <Translation>
    <Keyword>ToothNumberingSystemId</Keyword>
    <Text>Tooth Numbering System:</Text>
  </Translation>
  <Translation>
    <Keyword>OpenUserPrefencesFileId</Keyword>
    <Text>Open user preferences file</Text>
  </Translation>
  <Translation>
    <Keyword>AdvancedRenderingId</Keyword>
    <Text>Advanced rendering</Text>
  </Translation>
  <Translation>
    <Keyword>JawTypeUpperId</Keyword>
    <Text>Upper</Text>
  </Translation>
  <Translation>
    <Keyword>JawTypeLowerId</Keyword>
    <Text>Lower</Text>
  </Translation>
  <Translation>
    <Keyword>ScanTypeIsId</Keyword>
    <Text>Scan is:</Text>
  </Translation>
  <Translation>
    <Keyword>WorkflowContainsId</Keyword>
    <Text>Workflow contains:</Text>
  </Translation>
  <Translation>
    <Keyword>FlexibleId</Keyword>
    <Text>Flexible</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartsId</Keyword>
    <Text>Imported parts</Text>
  </Translation>
  <Translation>
    <Keyword>NoSupportBarId</Keyword>
    <Text>No support bar</Text>
  </Translation>
  <Translation>
    <Keyword>AddApronId</Keyword>
    <Text>Add apron</Text>
  </Translation>
  <Translation>
    <Keyword>AntagonistsId</Keyword>
    <Text>Antagonists</Text>
  </Translation>
  <Translation>
    <Keyword>JawScansId</Keyword>
    <Text>Jaw scans</Text>
  </Translation>
  <Translation>
    <Keyword>AllOtherPartsId</Keyword>
    <Text>All other parts</Text>
  </Translation>
  <Translation>
    <Keyword>AntagonistId</Keyword>
    <Text>Antagonist</Text>
  </Translation>
  <Translation>
    <Keyword>JawScanId</Keyword>
    <Text>Jaw scan</Text>
  </Translation>
  <Translation>
    <Keyword>OtherPartId</Keyword>
    <Text>Other part</Text>
  </Translation>
  <Translation>
    <Keyword>ErrorId</Keyword>
    <Text>Error</Text>
  </Translation>
  <Translation>
    <Keyword>ShowHideGroupId</Keyword>
    <Text>SHOW/HIDE</Text>
  </Translation>
  <Translation>
    <Keyword>PartialGroupId</Keyword>
    <Text>PARTIAL</Text>
  </Translation>
  <Translation>
    <Keyword>HiddenGroupId</Keyword>
    <Text>HIDDEN</Text>
  </Translation>
  <Translation>
    <Keyword>ShowAllButtonId</Keyword>
    <Text>Show all</Text>
  </Translation>
  <Translation>
    <Keyword>WaxNameId</Keyword>
    <Text>Wax</Text>
  </Translation>
  <Translation>
    <Keyword>RefractoryNameId</Keyword>
    <Text>Refractory</Text>
  </Translation>
  <Translation>
    <Keyword>BlockoutNameId</Keyword>
    <Text>Blockout</Text>
  </Translation>
   <Translation>
    <Keyword>BuildNumberedNameId</Keyword>
    <Text>Build part %d</Text>
  </Translation>
  <Translation>
    <Keyword>ScanNameId</Keyword>
    <Text>Scan</Text>
  </Translation>
  <Translation>
    <Keyword>AntagonistNameId</Keyword>
    <Text>Antagonist</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartId</Keyword>
    <Text>Imported part</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorCurveNameId</Keyword>
    <Text>Major connector</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorCurveNumberedNameId</Keyword>
    <Text>Major connector curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorHoleCurveNameId</Keyword>
    <Text>Major connector hole</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorHoleCurveNumberedNameId</Keyword>
    <Text>Major connector hole curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserCurveNameId</Keyword>
    <Text>Mesh riser</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserCurveNumberedNameId</Keyword>
    <Text>Mesh riser curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserHoleCurveNameId</Keyword>
    <Text>Mesh riser hole</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserHoleCurveNumberedNameId</Keyword>
    <Text>Mesh riser hole curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserTissueSupportCurveNameId</Keyword>
    <Text>Tissue support</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserTissueSupportCurveNumberedNameId</Keyword>
    <Text>Tissue support curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspCurveNameId</Keyword>
    <Text>Clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspCurveNumberedNameId</Keyword>
    <Text>Clasp curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>FinishLineCurveNameId</Keyword>
    <Text>Finish line</Text>
  </Translation>
  <Translation>
    <Keyword>FinishLineCurveNumberedNameId</Keyword>
    <Text>Finish line curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>MinorConnectorCurveNameId</Keyword>
    <Text>Minor connector</Text>
  </Translation>
  <Translation>
    <Keyword>MinorConnectorCurveNumberedNameId</Keyword>
    <Text>Minor connector curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspApproachCurveNameId</Keyword>
    <Text>Clasp approach</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspApproachCurveNumberedNameId</Keyword>
    <Text>Clasp approach curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>BuildPartId</Keyword>
    <Text>Output part %d</Text>
  </Translation>
  <Translation>
    <Keyword>SkippingUnfitCurveWithExplanationId</Keyword>
    <Text>Curves fit to the surface will not be used.
If you really want to use this curve, go to the curve tool,
select 'Edit curve', select the curve, and deselect the 'Fit curve' button.</Text>
  </Translation>
  <Translation>
    <Keyword>english</Keyword>
    <Text>english</Text>
  </Translation>
  <Translation>
    <Keyword>german</Keyword>
    <Text>german</Text>
  </Translation>
  <Translation>
    <Keyword>UndercutColorScaleId</Keyword>
    <Text>Undercut color scale</Text>
  </Translation>
  <Translation>
    <Keyword>DepthId</Keyword>
    <Text>Depth:</Text>
  </Translation>
  <Translation>
    <Keyword>ColorId</Keyword>
    <Text>Color:</Text>
  </Translation>
  <Translation>
    <Keyword>mm</Keyword>
    <Text>mm</Text>
  </Translation>
  <Translation>
    <Keyword>SettingsId</Keyword>
    <Text>Settings</Text>
  </Translation>
  <Translation>
    <Keyword>DefaultInsertionId</Keyword>
    <Text>Default insertion</Text>
  </Translation>
  <Translation>
    <Keyword>DefaultInsertionToolTipId</Keyword>
    <Text>Reset the path of insertion
to the default direction.</Text>
  </Translation>
  <Translation>
    <Keyword>SetInsertionFromViewId</Keyword>
    <Text>Set from view</Text>
  </Translation>
  <Translation>
    <Keyword>SetInsertionFromViewToolTipId</Keyword>
    <Text>Set the insertion path
to match the view direction.</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyBlockOutUndercutsId</Keyword>
    <Text>Block out undercuts</Text>
  </Translation>
  <Translation>
    <Keyword>DraftAngleId</Keyword>
    <Text>Draft angle</Text>
  </Translation>
  <Translation>
    <Keyword>DraftAngleToolTipId</Keyword>
    <Text>Sets draft angle for
blocking out undercuts.</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyApplyId</Keyword>
    <Text>Apply</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyApplyToolTipId</Keyword>
    <Text>Performs the blockout using current
values and insertion axis.</Text>
  </Translation>
  <Translation>
    <Keyword>HardId</Keyword>
    <Text>Hard</Text>
  </Translation>
  <Translation>
    <Keyword>SoftId</Keyword>
    <Text>Soft</Text>
  </Translation>
  <Translation>
    <Keyword>WaxHardnessId</Keyword>
    <Text>Wax hardness</Text>
  </Translation>
  <Translation>
    <Keyword>AreaOfInfluenceId</Keyword>
    <Text>Area of influence</Text>
  </Translation>
  <Translation>
    <Keyword>SmallId</Keyword>
    <Text>Small</Text>
  </Translation>
  <Translation>
    <Keyword>LargeId</Keyword>
    <Text>Large</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothToggleId</Keyword>
    <Text>Smooth</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothToggleToolTipId</Keyword>
    <Text>Switch to smoothing mode</Text>
  </Translation>
  <Translation>
    <Keyword>SmudgeToggleId</Keyword>
    <Text>Smudge</Text>
  </Translation>
  <Translation>
    <Keyword>SmudgeToggleToolTipId</Keyword>
    <Text>Switch to smudging mode</Text>
  </Translation>
  <Translation>
    <Keyword>FillRemovedBlockoutWithWaxId</Keyword>
    <Text>Fill removed blockout with wax</Text>
  </Translation>
  <Translation>
    <Keyword>FillRemovedBlockoutWithWaxToolTipId</Keyword>
    <Text>Removed blockout will become wax
after leaving the tool</Text>
  </Translation>
  <Translation>
    <Keyword>ShowWaxId</Keyword>
    <Text>Show wax</Text>
  </Translation>
  <Translation>
    <Keyword>ShowWaxToolTipId</Keyword>
    <Text>Show the hidden wax.
Suspends blockout editing.</Text>
  </Translation>
  <Translation>
    <Keyword>ToolSizeId</Keyword>
    <Text>Tool size</Text>
  </Translation>
  <Translation>
    <Keyword>DefaultSmudgeStatusBarId</Keyword>
    <Text>Drag mouse to remove, SHIFT and drag to add blockout. Use ALT-1 to toggle smoothing.</Text>
  </Translation>
  <Translation>
    <Keyword>DefaultSmoothStatusBarId</Keyword>
    <Text>Drag mouse over blockout to smooth. Use ALT-1 to toggle to smudging, ALT-234 for modes.</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothLevelId</Keyword>
    <Text>Smooth level</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothLevelToolTipId</Keyword>
    <Text>Smoothing strength</Text>
  </Translation>
  <Translation>
    <Keyword>ReadyId</Keyword>
    <Text>Ready</Text>
  </Translation>
  <Translation>
    <Keyword>SurveyInfoId</Keyword>
    <Text>Orient and set the desired path of insertion, then press 'Apply' to block out undercuts.</Text>
  </Translation>
  <Translation>
    <Keyword>GpuInitFirstTimeId</Keyword>
    <Text>Initializing GPU (first-time initialization may take a few minutes).</Text>
  </Translation>
  <Translation>
    <Keyword>OpeningSelectedModelId</Keyword>
    <Text>Opening selected model</Text>
  </Translation>
  <Translation>
    <Keyword>PreparingToEditBlockoutId</Keyword>
    <Text>Preparing to edit blockout</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothMeltToolTipId</Keyword>
    <Text>Melt smooth</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothMaterialToolTipId</Keyword>
    <Text>Regular smooth</Text>
  </Translation>
  <Translation>
    <Keyword>AddMaterialToolTipId</Keyword>
    <Text>Additive Smooth</Text>
  </Translation>
  <Translation>
    <Keyword>RemoveMaterialToolTipId</Keyword>
    <Text>Subtractive smooth</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothMeltId</Keyword>
    <Text>Melt smooth</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothMaterialId</Keyword>
    <Text>Regular smooth</Text>
  </Translation>
  <Translation>
    <Keyword>AddMaterialId</Keyword>
    <Text>Additive smooth</Text>
  </Translation>
  <Translation>
    <Keyword>RemoveMaterialId</Keyword>
    <Text>Subtractive smooth</Text>
  </Translation>
  <Translation>
    <Keyword>WaxHardnessToolTipId</Keyword>
    <Text>Controls tool speed</Text>
  </Translation>
  <Translation>
    <Keyword>AreaOfInfluenceToolTipId</Keyword>
    <Text>Sets area of influence</Text>
  </Translation>
  <Translation>
    <Keyword>UndoId</Keyword>
    <Text>Undo</Text>
  </Translation>
  <Translation>
    <Keyword>RedoId</Keyword>
    <Text>Redo</Text>
  </Translation>
  <Translation>
    <Keyword>SettingsToolTipId</Keyword>
    <Text>Show advanced settings</Text>
  </Translation>
  <Translation>
    <Keyword>GeneratingRefractoryColorMapId</Keyword>
    <Text>Generating a color map to indicate the depth of refractory undercuts.</Text>
  </Translation>
  <Translation>  
    <Keyword>GeneratingMeshColorMapId</Keyword>
    <Text>Generating a color map to indicate the depth of mesh undercuts.</Text>
  </Translation>
  <Translation>
    <Keyword>GeneratingRefractoryId</Keyword>
    <Text>Generating refractory model</Text>
  </Translation>
  <Translation>
    <Keyword>UpdatingUndercutColorsId</Keyword>
    <Text>Updating undercut colors</Text>
  </Translation>
  <Translation>
    <Keyword>ReloadingSurveyToolId</Keyword>
    <Text>Reloading the survey tool</Text>
  </Translation>
  <Translation>
    <Keyword>FinishingSurveyId</Keyword>
    <Text>Updating the refractory model with blockout wax and generating undercut depth coloring.</Text>
  </Translation>
  <Translation>
    <Keyword>SetsToolSizeId</Keyword>
    <Text>Sets tool size (SHIFT +/-)</Text>
  </Translation>
  <Translation>
    <Keyword>DrawNewCurveId</Keyword>
    <Text>Draw new curve</Text>
  </Translation>
  <Translation>
    <Keyword>DrawNewCurveToolTipId</Keyword>
    <Text>Click to add points.
Double click to end.</Text>
  </Translation>
  <Translation>
    <Keyword>DrawReplaceSegmentId</Keyword>
    <Text>Draw/replace segment</Text>
  </Translation>
  <Translation>
    <Keyword>DrawReplaceSegmentToolTipId</Keyword>
    <Text>Start and end new segment
on an existing curve.</Text>
  </Translation>
  <Translation>
    <Keyword>MoveControlPointsId</Keyword>
    <Text>Edit curve</Text>
  </Translation>
  <Translation>
    <Keyword>MoveControlPointsToolTipId</Keyword>
    <Text>Select the curve you want to edit.</Text>
  </Translation>
  <Translation>
    <Keyword>CurveFittingId</Keyword>
    <Text>Fitting:</Text>
  </Translation>
  <Translation>
    <Keyword>FitToWaxId</Keyword>
    <Text>Fit to wax</Text>
  </Translation>
  <Translation>
    <Keyword>FitToWaxToolTipId</Keyword>
    <Text>Fit curve to topmost surface.
Uncheck to free-float curve between points.</Text>
  </Translation>
  <Translation>
    <Keyword>FitToRefractoryId</Keyword>
    <Text>Fit to refractory</Text>
  </Translation>
  <Translation>
    <Keyword>FitToRefractoryToolTipId</Keyword>
    <Text>Fit curve control points under the wax</Text>
  </Translation>
  <Translation>
    <Keyword>FitToMeshId</Keyword>
    <Text>Fit to model scan</Text>
  </Translation>
  <Translation>
    <Keyword>FitToMeshToolTipId</Keyword>
    <Text>Fit curve to mesh</Text>
  </Translation>
  <Translation>
    <Keyword>TwoPointCurveId</Keyword>
    <Text>Two-point curve:</Text>
  </Translation>
  <Translation>
    <Keyword>AttachableCurveId</Keyword>
    <Text>T-junction curve:</Text>
  </Translation>
  <Translation>
    <Keyword>LeaveCurvesOpenId</Keyword>
    <Text>Leave curves open:</Text>
  </Translation>
  <Translation>
    <Keyword>CurveLengthId</Keyword>
    <Text>Curve length (mm)</Text>
  </Translation>
  <Translation>
    <Keyword>EditPointsId</Keyword>
    <Text>Edit points</Text>
  </Translation>
  <Translation>
    <Keyword>ReduceToleranceId</Keyword>
    <Text>Tolerance:</Text>
  </Translation>
  <Translation>
    <Keyword>ReduceToleranceToolTipId</Keyword>
    <Text>Reduce triangles in output within a specified tolerance</Text>
  </Translation>
  <Translation>
    <Keyword>OrientToInsertionId</Keyword>
    <Text>Orient to insertion axis</Text>
  </Translation>
  <Translation>
    <Keyword>OrientToInsertionToolTipId</Keyword>
    <Text>Rotate output to insertion axis</Text>
  </Translation>
  <Translation>
    <Keyword>AutoReliefId</Keyword>
    <Text>Auto relief</Text>
  </Translation>
  <Translation>
    <Keyword>AutoReliefToolTipId</Keyword>
    <Text>Use algorithm to improve fit</Text>
  </Translation>
  <Translation>
    <Keyword>FillVoidCheckId</Keyword>
    <Text>Fill void check</Text>
  </Translation>
  <Translation>
    <Keyword>FillVoidCheckToolTipId</Keyword>
    <Text>Find and fill any voids in wax</Text>
  </Translation>
  <Translation>
    <Keyword>DeleteSceneOnExitId</Keyword>
    <Text>Delete scene on exit</Text>
  </Translation>
  <Translation>
    <Keyword>DeleteConstructedPartId</Keyword>
    <Text>Delete constructed part</Text>
  </Translation>
  <Translation>
    <Keyword>BuildCompleteId</Keyword>
    <Text>Build complete</Text>
  </Translation>
  <Translation>
    <Keyword>SavingTheModelId</Keyword>
    <Text>Saving the model</Text>
  </Translation>
  <Translation>
    <Keyword>RemovingRefractoryId</Keyword>
    <Text>Removing refractory</Text>
  </Translation>
  <Translation>
    <Keyword>BuildInProgressId</Keyword>
    <Text>Save for build in progress, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>BuildFailedId</Keyword>
    <Text>Build failed</Text>
  </Translation>
  <Translation>
    <Keyword>VirtualModelId</Keyword>
    <Text>Creating virtual model</Text>
  </Translation>
  <Translation>
    <Keyword>FillingVoidsId</Keyword>
    <Text>Filling voids</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyingAutoReliefId</Keyword>
    <Text>Applying auto relief</Text>
  </Translation>
  <Translation>
    <Keyword>ReducingNewMeshId</Keyword>
    <Text>Creating new mesh. Please wait.</Text>
  </Translation>
  <Translation>
    <Keyword>ExportingStlId</Keyword>
    <Text>Exporting STL</Text>
  </Translation>
  <Translation>
    <Keyword>RemovingSceneFileId</Keyword>
    <Text>Removing scene file</Text>
  </Translation>
  <Translation>
    <Keyword>RestoringSceneId</Keyword>
    <Text>Restoring scene</Text>
  </Translation>
  <Translation>
    <Keyword>SavingSceneId</Keyword>
    <Text>Saving scene</Text>
  </Translation>
  <Translation>
    <Keyword>TriangleReductionId</Keyword>
    <Text>Reducing triangles</Text>
  </Translation>
  <Translation>
    <Keyword>GeneratingTrianglesId</Keyword>
    <Text>Generating triangles</Text>
  </Translation>
  <Translation>
    <Keyword>SaveForBuildId</Keyword>
    <Text>Save for build</Text>
  </Translation>
  <Translation>
    <Keyword>IncreasingModelToFitId</Keyword>
    <Text>Processing model</Text>
  </Translation>
  <Translation>
    <Keyword>CuttingPartialPonticNumId</Keyword>
    <Text>Cutting partial pontic %s</Text>
  </Translation>
  <Translation>
    <Keyword>MakingPartialPonticNumHollowId</Keyword>
    <Text>Making partial pontic %s hollow</Text>
  </Translation>
  <Translation>
    <Keyword>InsertingPartNumId</Keyword>
    <Text>Inserting part %s</Text>
  </Translation>
  <Translation>
    <Keyword>AdvancedDialogTitleId</Keyword>
    <Text>Advanced</Text>
  </Translation>
  <Translation>
    <Keyword>DefaultButtonId</Keyword>
    <Text>Use defaults</Text>
  </Translation>
  <Translation>
    <Keyword>ScaleModelId</Keyword>
    <Text>Scale</Text>
  </Translation>
  <Translation>
    <Keyword>StaticReliefId</Keyword>
    <Text>Static relief</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspAreaId</Keyword>
    <Text>Clasps</Text>
  </Translation>
  <Translation>
    <Keyword>OtherAreaId</Keyword>
    <Text>Other</Text>
  </Translation>
  <Translation>
    <Keyword>DynamicReliefId</Keyword>
    <Text>Dynamic relief</Text>
  </Translation>
  <Translation>
    <Keyword>OtherAreaNotClaspsId</Keyword>
    <Text>Other (except clasps)</Text>
  </Translation>
  <Translation>
    <Keyword>ConnectorAreaId</Keyword>
    <Text>Connector</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartsAreaId</Keyword>
    <Text>Imported parts</Text>
  </Translation>
  <Translation>
    <Keyword>ClearId</Keyword>
    <Text>Clear</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyId</Keyword>
    <Text>Apply</Text>
  </Translation>
  <Translation>
    <Keyword>SubtractPipeId</Keyword>
    <Text>Subtract pipe</Text>
  </Translation>
  <Translation>
    <Keyword>SubtractPipeToolTipId</Keyword>
    <Text>Remove wax from model with pipe</Text>
  </Translation>
  <Translation>
    <Keyword>AddPipeId</Keyword>
    <Text>Add pipe</Text>
  </Translation>
  <Translation>
    <Keyword>AddPipeToolTipId</Keyword>
    <Text>Add pipe to wax</Text>
  </Translation>
  <Translation>
    <Keyword>EndPipeDiamId</Keyword>
    <Text>End diam.</Text>
  </Translation>
  <Translation>
    <Keyword>EndPipeDiamToolTipId</Keyword>
    <Text>To create a variable diameter pipe,
enable the 'End diameter' field.</Text>
  </Translation>
  <Translation>
    <Keyword>StartPipeDiamId</Keyword>
    <Text>Start diam.</Text>
  </Translation>
  <Translation>
    <Keyword>BlendSmoothlyIntoMaskId</Keyword>
    <Text>Blend smoothly into mask</Text>
  </Translation>
  <Translation>
    <Keyword>BlendSmoothlyIntoMaskToolTipId</Keyword>
    <Text>Make smooth transition to mask boundary</Text>
  </Translation>
  <Translation>
    <Keyword>HidingBlockoutAndRefractoryId</Keyword>
    <Text>Hiding blockout and refractory</Text>
  </Translation>
  <Translation>
    <Keyword>HideBlockoutAndRefractoryId</Keyword>
    <Text>Hide blockout and refractory</Text>
  </Translation>
  <Translation>
    <Keyword>HideBlockoutAndRefractoryToolTipId</Keyword>
    <Text>Temporarily remove refractory
to edit bottom of the wax.</Text>
  </Translation>
  <Translation>
    <Keyword>ThicknessId</Keyword>
    <Text>Thickness</Text>
  </Translation>
  <Translation>
    <Keyword>ThicknessAdvId</Keyword>
    <Text>Thickness:</Text>
  </Translation>
  <Translation>
    <Keyword>CurvePipeMessageId</Keyword>
    <Text>Select one or more curves to create a pipe.</Text>
  </Translation>
  <Translation>
    <Keyword>ClearPipeId</Keyword>
    <Text>Clear</Text>
  </Translation>
  <Translation>
    <Keyword>ClearPipeToolTipId</Keyword>
    <Text>Clears all selected curves.</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothingWaxId</Keyword>
    <Text>Smoothing the selected wax. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>DragToSmoothId</Keyword>
    <Text>Drag mouse over wax to smooth.</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothSmudgeId</Keyword>
    <Text>Drag mouse to remove. Drag mouse and press SHIFT to add.</Text>
  </Translation>
  <Translation>
    <Keyword>CreateMeshId</Keyword>
    <Text>Create mesh</Text>
  </Translation>
  <Translation>
    <Keyword>CreateConnectorId</Keyword>
    <Text>Create connector</Text>
  </Translation>
  <Translation>
    <Keyword>MeshPreviewId</Keyword>
    <Text>Preview</Text>
  </Translation>
  <Translation>
    <Keyword>MeshPreviewToolTipId</Keyword>
    <Text>Preview the mesh</Text>
  </Translation>
  <Translation>
    <Keyword>MeshClearId</Keyword>
    <Text>Clear</Text>
  </Translation>
  <Translation>
    <Keyword>MeshClearToolTipId</Keyword>
    <Text>Clear the preview</Text>
  </Translation>
  <Translation>
    <Keyword>MeshApplyId</Keyword>
    <Text>Apply</Text>
  </Translation>
  <Translation>
    <Keyword>MeshConnectorSelectId</Keyword>
    <Text>Use the mouse to (de)select curve loops that you wish to use, use CTRL to force the curve to be a connector curve.</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserComputingId</Keyword>
    <Text>Wrapping preview of mesh image to wax, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyWaitId</Keyword>
    <Text>Applying wax, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>ModifyingWaitId</Keyword>
    <Text>Modifying mesh, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>LoadTextureWaitId</Keyword>
    <Text>Loading new pattern, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>UnknownErrorId</Keyword>
    <Text>An unknown error occurred.</Text>
  </Translation>
  <Translation>
    <Keyword>RepositionTriadId</Keyword>
    <Text>Drag the on-screen interactor to scale and position the mesh preview.</Text>
  </Translation>
  <Translation>
    <Keyword>TranslateTextureId</Keyword>
    <Text>Drag the image</Text>
  </Translation>
  <Translation>
    <Keyword>RotateTextureId</Keyword>
    <Text>Rotate the image</Text>
  </Translation>
  <Translation>
    <Keyword>ScaleTextureId</Keyword>
    <Text>Scale the image</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossOffsetId</Keyword>
    <Text>Change the emboss distance</Text>
  </Translation>
  <Translation>
    <Keyword>AdjustMeshPreviewId</Keyword>
    <Text>Adjust the preview by manipulating the triad or settings. When done, press 'Apply' to create the wax.</Text>
  </Translation>
  <Translation>
    <Keyword>TextureId</Keyword>
    <Text>Pattern:</Text>
  </Translation>
  <Translation>
    <Keyword>HoleSizeId</Keyword>
    <Text>Hole size:</Text>
  </Translation>
  <Translation>
    <Keyword>MeshThicknessId</Keyword>
    <Text>Mesh wax:</Text>
  </Translation>
  <Translation>
    <Keyword>MeshReliefWaxId</Keyword>
    <Text>Relief wax:</Text>
  </Translation>
  <Translation>
    <Keyword>MeshSMoothingId</Keyword>
    <Text>Smoothing:</Text>
  </Translation>
  <Translation>
    <Keyword>MeshTensionId</Keyword>
    <Text>Tension:</Text>
  </Translation>
  <Translation>
    <Keyword>StippleScaleId</Keyword>
    <Text>Scale:</Text>
  </Translation>
  <Translation>
    <Keyword>StippleThicknessId</Keyword>
    <Text>Offset:</Text>
  </Translation>
  <Translation>
    <Keyword>BaseThicknessId</Keyword>
    <Text>Thickness:</Text>
  </Translation>
  <Translation>
    <Keyword>ConnectorUseFalloffId</Keyword>
    <Text>Use falloff</Text>
  </Translation>
  <Translation>
    <Keyword>LinearFalloffId</Keyword>
    <Text>Linear falloff:</Text>
  </Translation>
  <Translation>
    <Keyword>PartialMeshId</Keyword>
    <Text>Mesh</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorId</Keyword>
    <Text>Connector</Text>
  </Translation>
  <Translation>
    <Keyword>LowId</Keyword>
    <Text>Low</Text>
  </Translation>
  <Translation>
    <Keyword>MediumId</Keyword>
    <Text>Medium</Text>
  </Translation>
  <Translation>
    <Keyword>HighId</Keyword>
    <Text>High</Text>
  </Translation>
  <Translation>
    <!-- Major connector texture (stipple) filename -->
    <Keyword>BEGO-Coarse</Keyword>
    <Text>Coarse</Text>
  </Translation>
  <Translation>
    <!-- Major connector texture (stipple) filename -->
    <Keyword>BEGO-Fine</Keyword>
    <Text>Fine</Text>
  </Translation>
  <Translation>
    <!-- Major connector texture (stipple) filename -->
    <Keyword>Leather-1</Keyword>
    <Text>Leather 1</Text>
  </Translation>
  <Translation>
    <!-- Major connector texture (stipple) filename -->
    <Keyword>Leather-2</Keyword>
    <Text>Leather 2</Text>
  </Translation>
  <Translation>
    <!-- Major connector texture (stipple) filename -->
    <Keyword>Smooth-1</Keyword>
    <Text>Smooth</Text>
  </Translation>
  <Translation>
    <!-- Mesh Riser texture filename -->
    <Keyword>Round-1</Keyword>
    <Text>Round</Text>
  </Translation>
  <Translation>
    <!-- Mesh Riser texture filename -->
    <Keyword>Square-1</Keyword>
    <Text>Square</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyingWaxHoleWaitId</Keyword>
    <Text>Applying wax hole, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>MajorConnectorCurveSelectId</Keyword>
    <Text>First, select the outer curve loop defining the wax area, then, if desired, an inner curve loop to create a hole.</Text>
  </Translation>
  <Translation>
    <Keyword>GpuComputationPrepId</Keyword>
    <Text>Processing model</Text>
  </Translation>
  <Translation>
    <Keyword>ComputingMaskVolId</Keyword>
    <Text>Processing model</Text>
  </Translation>
  <Translation>
    <Keyword>ComputingMaskDistanceVolId</Keyword>
    <Text>Processing model</Text>
  </Translation>
  <Translation>
    <Keyword>ConvertingToWaxWaitId</Keyword>
    <Text>Converting to wax, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>StippleId</Keyword>
    <Text>Stipple pattern</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserAutoSelectId</Keyword>
    <Text>Auto-select</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserAutoSelectToolTipId</Keyword>
    <Text>Automatically select the curve-bounded mesh regions. Invisible curves will be skipped.</Text>
  </Translation>
  <Translation>
    <Keyword>MeshRiserSelectCurvesId</Keyword>
    <Text>Select a set of curves that enclose the wax region to be embossed.</Text>
  </Translation>
  <!-- clasp profile filenames begin-->
  <Translation>
    <Keyword>ApproachArm</Keyword>
    <Text>Approach arm</Text>
  </Translation>
  <Translation>
    <Keyword>Anterior</Keyword>
    <Text>Anterior</Text>
  </Translation>
  <Translation>
    <Keyword>Posterior</Keyword>
    <Text>Posterior</Text>
  </Translation>
  <Translation>
    <Keyword>GuidePlane</Keyword>
    <Text>Guide plane</Text>
  </Translation>
  <Translation>
    <Keyword>Ring</Keyword>
    <Text>Ring</Text>
  </Translation>
  <Translation>
    <Keyword>RoundWire</Keyword>
    <Text>Round wire</Text>
  </Translation>
  <!-- clasp profile filenames end-->
  <Translation>
    <Keyword>ClaspTypeId</Keyword>
    <Text>Type:</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType1Id</Keyword>
    <Text>Ring clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType2Id</Keyword>
    <Text>Ring clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType3Id</Keyword>
    <Text>J clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType4Id</Keyword>
    <Text>T clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType5Id</Keyword>
    <Text>T clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType1ToolTipId</Keyword>
    <Text>Single curve ring clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType2ToolTipId</Keyword>
    <Text>Dual curve ring clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType3ToolTipId</Keyword>
    <Text>Dual curve J clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType4ToolTipId</Keyword>
    <Text>Dual curve T clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspType5ToolTipId</Keyword>
    <Text>Triple curve T clasp</Text>
  </Translation>
  <Translation>
    <Keyword>ProfileId</Keyword>
    <Text>Profile</Text>
  </Translation>
  <Translation>
    <Keyword>FlipProfileId</Keyword>
    <Text>Flip profile</Text>
  </Translation>
  <Translation>
    <Keyword>FlipProfileToolTipId</Keyword>
    <Text>Flip profile</Text>
  </Translation>
  <Translation>
    <Keyword>RotateProfileId</Keyword>
    <Text>Rotate profile</Text>
  </Translation>
  <Translation>
    <Keyword>RotateProfileToolTipId</Keyword>
    <Text>Rotate the profile 180 degrees</Text>
  </Translation>
  <Translation>
    <Keyword>EditProfileId</Keyword>
    <Text>Edit profile</Text>
  </Translation>
  <Translation>
    <Keyword>EditProfileToolTipId</Keyword>
    <Text>Edit this profile, delete it
or create a new one.</Text>
  </Translation>
  <Translation>
    <Keyword>SaveId</Keyword>
    <Text>Save</Text>
  </Translation>
  <Translation>
    <Keyword>SaveAsId</Keyword>
    <Text>Save as</Text>
  </Translation>
  <Translation>
    <Keyword>DeleteId</Keyword>
    <Text>Delete</Text>
  </Translation>
  <Translation>
    <Keyword>DoneId</Keyword>
    <Text>Done</Text>
  </Translation>
  <Translation>
    <Keyword>OverwriteProfileId</Keyword>
    <Text>Overwrite existing profile named "%s"?</Text>
  </Translation>
  <Translation>
    <Keyword>ChooseUniqueProfileNameId</Keyword>
    <Text>Choose a unique name for your custom profile,
unless you wish to replace an existing profile.</Text>
  </Translation>
  <Translation>
    <Keyword>SaveCustomProfileId</Keyword>
    <Text>Save custom profile</Text>
  </Translation>
  <Translation>
    <Keyword>NumberId</Keyword>
    <Text>Number:</Text>
  </Translation>
  <Translation>
    <Keyword>NameId</Keyword>
    <Text>Name</Text>
  </Translation>
  <Translation>
    <Keyword>PipeProgressId</Keyword>
    <Text>Converting pipe to wax</Text>
  </Translation>
  <Translation>
    <Keyword>SelectSingleCurveForClaspId</Keyword>
    <Text>Select a single curve to form the clasp</Text>
  </Translation>
  <Translation>
    <Keyword>SelectTwoCurvesForClaspId</Keyword>
    <Text>Select two curves to form the clasp</Text>
  </Translation>
  <Translation>
    <Keyword>SelectTwoCurvesForClaspRingFirstId</Keyword>
    <Text>Select two curves to form the clasp. The connector curve must be selected before the ring curve.</Text>
  </Translation>
  <Translation>
    <Keyword>SelectThreeCurvesForClaspRingFirstId</Keyword>
    <Text>Select three curves to form the clasp. The connector curve must be selected before the ring curves.</Text>
  </Translation>
  <Translation>
    <Keyword>WidthAdvId</Keyword>
    <Text>Width:</Text>
  </Translation>
  <Translation>
    <Keyword>Width1Id</Keyword>
    <Text>Width 1:</Text>
  </Translation>
  <Translation>
    <Keyword>Width2Id</Keyword>
    <Text>Width 2:</Text>
  </Translation>
  <Translation>
    <Keyword>Width3Id</Keyword>
    <Text>Width 3:</Text>
  </Translation>
  <Translation>
    <Keyword>LengthId</Keyword>
    <Text>Length</Text>
  </Translation>
  <Translation>
    <Keyword>LengthAdvId</Keyword>
    <Text>Length:</Text>
  </Translation>
  <Translation>
    <Keyword>ClaspAdvId</Keyword>
    <Text>Clasp:</Text>
  </Translation>
  <Translation>
    <Keyword>ApproachAdvId</Keyword>
    <Text>Approach:</Text>
  </Translation>
  <Translation>
    <Keyword>SwapEndsId</Keyword>
    <Text>Swap ends</Text>
  </Translation>
  <Translation>
    <Keyword>SizeId</Keyword>
    <Text>Size</Text>
  </Translation>
  <Translation>
    <Keyword>TaperEndsId</Keyword>
    <Text>Taper ends</Text>
  </Translation>
  <Translation>
    <Keyword>OffsetAboveSurfaceId</Keyword>
    <Text>Offset above surface</Text>
  </Translation>
  <Translation>
    <Keyword>TaperLengthFromEnd1Id</Keyword>
    <Text>Taper length from end 1</Text>
  </Translation>
  <Translation>
    <Keyword>SettingsAdvId</Keyword>
    <Text>Settings: </Text>
  </Translation>
  <Translation>
    <Keyword>FinishlinePreviewId</Keyword>
    <Text>Preview</Text>
  </Translation>
  <Translation>
    <Keyword>FinishlinePreviewToolTipId</Keyword>
    <Text>Preview the finish line</Text>
  </Translation>
  <Translation>
    <Keyword>FixedAspectId</Keyword>
    <Text>Fixed aspect</Text>
  </Translation>
  <Translation>
    <Keyword>ActualSizeId</Keyword>
    <Text>Actual size</Text>
  </Translation>
  <Translation>
    <Keyword>DepthBelowSurfaceId</Keyword>
    <Text>Depth below surface</Text>
  </Translation>
  <!-- finishline profile filenames begin -->
  <Translation>
    <Keyword>Lower</Keyword>
    <Text>Lower</Text>
  </Translation>
  <Translation>
    <Keyword>Sharkfin</Keyword>
    <Text>Shark fin</Text>
  </Translation>
  <Translation>
    <Keyword>Standard-1</Keyword>
    <Text>Standard 1</Text>
  </Translation>
  <Translation>
    <Keyword>Standard-2</Keyword>
    <Text>Standard 2</Text>
  </Translation>
  <Translation>
    <Keyword>Upper</Keyword>
    <Text>Upper</Text>
  </Translation>
  <!-- finishline profile filenames end -->
  <Translation>
    <Keyword>ProfileOrientationId</Keyword>
    <Text>Profile orientation</Text>
  </Translation>
  <Translation>
    <Keyword>CreateEndcapsId</Keyword>
    <Text>Capped ends</Text>
  </Translation>
  <Translation>
    <Keyword>WaxSurfaceId</Keyword>
    <Text>Wax surface</Text>
  </Translation>
  <Translation>
    <Keyword>RefractorySurfaceId</Keyword>
    <Text>Refractory surface</Text>
  </Translation>
  <Translation>
    <Keyword>InsertionPathId</Keyword>
    <Text>Insertion path</Text>
  </Translation>
  <Translation>
    <Keyword>CurveTangentId</Keyword>
    <Text>Curve tangent</Text>
  </Translation>
  <Translation>
    <Keyword>NoRotationId</Keyword>
    <Text>No rotation</Text>
  </Translation>
  <!-- bar profile filenames begin -->
  <Translation>
    <Keyword>Circle</Keyword>
    <Text>Circle</Text>
  </Translation>
  <Translation>
    <Keyword>Halfround</Keyword>
    <Text>Half round</Text>
  </Translation>
  <Translation>
    <Keyword>Standard</Keyword>
    <Text>Standard bar</Text>
  </Translation>
  <Translation>
    <Keyword>TearDrop</Keyword>
    <Text>Tear drop</Text>
  </Translation>
  <!-- bar profile filenames end -->
  <Translation>
    <Keyword>DefaultId</Keyword>
    <Text>Default</Text>
  </Translation>
  <Translation>
    <Keyword>AddWaxWaitId</Keyword>
    <Text>Adding wax. This may take a few moments.</Text>
  </Translation>
  <Translation>
    <Keyword>SelectStlId</Keyword>
    <Text>Load scan data</Text>
  </Translation>
  <Translation>
    <Keyword>ConvertingPartsToWaxId</Keyword>
    <Text>Converting imported part %s to wax</Text>
  </Translation>
  <Translation>
    <Keyword>ConvertingPartsToRefractoryId</Keyword>
    <Text>Converting imported part %s to refractory</Text>
  </Translation>
  <Translation>
    <Keyword>AddFileId</Keyword>
    <Text>Add file</Text>
  </Translation>
  <Translation>
    <Keyword>ConvertToWaxId</Keyword>
    <Text>Convert to wax</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartAsReferenceId</Keyword>
    <Text>Reference</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartAsWaxId</Keyword>
    <Text>Editable</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartAsMergedMeshId</Keyword>
    <Text>Non-editable</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartAsRefactoryId</Keyword>
    <Text>Refractory</Text>
  </Translation>
  <Translation>
    <Keyword>SaveAnywayId</Keyword>
    <Text>Save anyway</Text>
  </Translation>
  <Translation>
    <Keyword>SaveAnywayExtId</Keyword>
    <Text>The existing scene will be overwritten</Text>
  </Translation>
  <Translation>
    <Keyword>SaveAsExtId</Keyword>
    <Text>You can select a new location or filename</Text>
  </Translation>
  <Translation>
    <Keyword>SaveKeepBothId</Keyword>
    <Text>Save, but keep both files</Text>
  </Translation>
  <Translation>
    <Keyword>SaveKeepBothExtId</Keyword>
    <Text>The pre-existing scene will be renamed</Text>
  </Translation>
  <Translation>
    <Keyword>CancelExtId</Keyword>
    <Text>The scene will not be saved</Text>
  </Translation>
  <Translation>
    <Keyword>FinishId</Keyword>
    <Text>Finish</Text>
  </Translation>
  <Translation>
    <Keyword>MillingId</Keyword>
    <Text>Milling</Text>
  </Translation>
  <Translation>
    <Keyword>WatertightnessId</Keyword>
    <Text>Watertightness</Text>
  </Translation>
  <Translation>
    <Keyword>FitToPartialFilesId</Keyword>
    <Text>Make separate files, fit to partial</Text>
  </Translation>
  <Translation>
    <Keyword>OptimizeMergedPartsForId</Keyword>
    <Text>Optimize merged parts for</Text>
  </Translation>
  <Translation>
    <Keyword>PartialPonticsId</Keyword>
    <Text>Partial pontics</Text>
  </Translation>
  <Translation>
    <Keyword>MinimumThicknessId</Keyword>
    <Text>Minimum thickness</Text>
  </Translation>
  <Translation>
    <Keyword>MakeHollowId</Keyword>
    <Text>Make hollow</Text>
  </Translation>
  <Translation>
    <Keyword>DraftAngleForFitToPartialId</Keyword>
    <Text>Draft angle</Text>
  </Translation>
  <Translation>
    <Keyword>ToolRadiusForFitToPartialId</Keyword>
    <Text>Tool diameter</Text>
  </Translation>
  <Translation>
    <Keyword>GapForFitToPartialId</Keyword>
    <Text>Offset</Text>
  </Translation>
  <Translation>
    <Keyword>MakeImportedPartActiveId</Keyword>
    <Text>Active</Text>
  </Translation>
  <Translation>
    <Keyword>CutoffForFitToPartialId</Keyword>
    <Text>Distance from relief</Text>
  </Translation>
  <Translation>
    <Keyword>InnerTrianglesToRefractory</Keyword>
    <Text>Inside to refractory</Text>
  </Translation>
  <Translation>
    <Keyword>OptimizedForMillingId</Keyword>
    <Text>Optimized for milling</Text>
  </Translation>
  <Translation>
    <Keyword>OptimizedForWatertightnessId</Keyword>
    <Text>Optimized for watertightness</Text>
  </Translation>
  <Translation>
    <Keyword>ImportMeshToReferenceId</Keyword>
    <Text>Creating new piece. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>ImportGeometryId</Keyword>
    <Text>Importing geometry. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>ImportMeshToWaxId</Keyword>
    <Text>Converting mesh to wax. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>InvolvedHealthyToothId</Keyword>
    <Text>Healthy tooth</Text>
  </Translation>
  <Translation>
    <Keyword>PartialPonticId</Keyword>
    <Text>Partial pontic</Text>
  </Translation>
  <Translation>
    <Keyword>PonticId</Keyword>
    <Text>Pontic</Text>
  </Translation>
  <Translation>
    <Keyword>CrownId</Keyword>
    <Text>Crown</Text>
  </Translation>
  <Translation>
    <Keyword>WaxupId</Keyword>
    <Text>Waxup</Text>
  </Translation>
  <Translation>
    <Keyword>InlayId</Keyword>
    <Text>Inlay</Text>
  </Translation>
  <Translation>
    <Keyword>BridgeId</Keyword>
    <Text>Bridge</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedPartialId</Keyword>
    <Text>Imported partial</Text>
  </Translation>
  <Translation>
    <Keyword>TelescopeId</Keyword>
    <Text>Telescope</Text>
  </Translation>
  <Translation>
    <Keyword>VeneerId</Keyword>
    <Text>Veneer</Text>
  </Translation>
  <Translation>
    <Keyword>CopingId</Keyword>
    <Text>Coping</Text>
  </Translation>
  <Translation>
    <Keyword>InnerCopingId</Keyword>
    <Text>Inner coping</Text>
  </Translation>
  <Translation>
    <Keyword>AttachmentId</Keyword>
    <Text>Attachment</Text>
  </Translation>
  <Translation>
    <Keyword>InnerCrownId</Keyword>
    <Text>Inner crown</Text>
  </Translation>
  <Translation>
    <Keyword>InnerWaxupId</Keyword>
    <Text>Inner waxup</Text>
  </Translation>
  <Translation>
    <Keyword>InnerBridgeId</Keyword>
    <Text>Inner bridge</Text>
  </Translation>
  <Translation>
    <Keyword>BarPillarId</Keyword>
    <Text>Bar pillar</Text>
  </Translation>
  <Translation>
    <Keyword>BarSegmentId</Keyword>
    <Text>Bar segment</Text>
  </Translation>
  <Translation>
    <Keyword>NextWizardId</Keyword>
    <Text>Next</Text>
  </Translation>
  <Translation>
    <Keyword>BackWizardId</Keyword>
    <Text>Back</Text>
  </Translation>
  <Translation>
    <Keyword>DoneWizardId</Keyword>
    <Text>Done</Text>
  </Translation>
  <Translation>
    <Keyword>WizardId</Keyword>
    <Text>Wizard</Text>
  </Translation>
  <Translation>
    <Keyword>ExpertId</Keyword>
    <Text>Expert</Text>
  </Translation>
  <Translation>
    <Keyword>FixDraftModeId</Keyword>
    <Text>Mode:</Text>
  </Translation>
  <Translation>
    <Keyword>SetPathModeId</Keyword>
    <Text>Set path</Text>
  </Translation>
  <Translation>
    <Keyword>SelectAreaId</Keyword>
    <Text>Select area</Text>
  </Translation>
  <Translation>
    <Keyword>SelectAreaToolTipId</Keyword>
    <Text>Select area</Text>
  </Translation>
  <Translation>
    <Keyword>SetFromViewId</Keyword>
    <Text>Set from view</Text>
  </Translation>
  <Translation>
    <Keyword>EraseId</Keyword>
    <Text>Erase</Text>
  </Translation>
  <Translation>
    <Keyword>SelectAllId</Keyword>
    <Text>Select</Text>
  </Translation>
  <Translation>
    <Keyword>ClearAllId</Keyword>
    <Text>Clear</Text>
  </Translation>
  <Translation>
    <Keyword>InvertSelectionId</Keyword>
    <Text>Invert</Text>
  </Translation>
  <Translation>
    <Keyword>EraseToolTipId</Keyword>
    <Text>Erase selection</Text>
  </Translation>
  <Translation>
    <Keyword>SelectAllToolTipId</Keyword>
    <Text>Select all</Text>
  </Translation>
  <Translation>
    <Keyword>ClearAllToolTipId</Keyword>
    <Text>Clear all</Text>
  </Translation>
  <Translation>
    <Keyword>InvertSelectionToolTipId</Keyword>
    <Text>Invert selection</Text>
  </Translation>
  <Translation>
    <Keyword>SetFromViewToolTipId</Keyword>
    <Text>Set the view to point down the insertion path</Text>
  </Translation>
  <Translation>
    <Keyword>DensityId</Keyword>
    <Text>Density</Text>
  </Translation>
  <Translation>
    <Keyword>UndercutId</Keyword>
    <Text>Undercut</Text>
  </Translation>
  <Translation>
    <Keyword>BlendWithMaskId</Keyword>
    <Text>Blend with mask</Text>
  </Translation>
  <Translation>
    <Keyword>WaxOnlyId</Keyword>
    <Text>Wax only</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyFeatherId</Keyword>
    <Text>Apply</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyFeatherToolTipId</Keyword>
    <Text>Apply feathering to the boundary</Text>
  </Translation>
  <Translation>
    <Keyword>PreserveDetailId</Keyword>
    <Text>Preserve detail</Text>
  </Translation>
  <Translation>
    <Keyword>FillingSelectedWaxId</Keyword>
    <Text>Filling the selected wax. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>SmoothAreaStatusBarId</Keyword>
    <Text>Drag mouse over wax to select an area to smooth</Text>
  </Translation>
  <Translation>
    <Keyword>FeatheringWaxId</Keyword>
    <Text>Feathering the selected wax. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>DiameterId</Keyword>
    <Text>Diameter</Text>
  </Translation>
  <Translation>
    <Keyword>FeatherLevelId</Keyword>
    <Text>Feather level</Text>
  </Translation>
  <Translation>
    <Keyword>FillPassesId</Keyword>
    <Text>Fill passes</Text>
  </Translation>
  <Translation>
    <Keyword>FillerPromptSelectRegionId</Keyword>
    <Text>Select a set of curves that enclose the wax region to be filled</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyingFillerId</Keyword>
    <Text>Applying filler, please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>ThicknessToolTipId</Keyword>
    <Text>Extra thickness added to supplement the fill</Text>
  </Translation>
  <Translation>
    <Keyword>ClearFillerId</Keyword>
    <Text>Clear</Text>
  </Translation>
  <Translation>
    <Keyword>ClearFillerToolTipId</Keyword>
    <Text>Clear the fill preview and curve selection</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyFillerId</Keyword>
    <Text>Apply</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyFillerToolTipId</Keyword>
    <Text>Apply the fill</Text>
  </Translation>
  <Translation>
    <Keyword>FillerThicknessId</Keyword>
    <Text>Thickness</Text>
  </Translation>
  <Translation>
    <Keyword>FillSmoothLevelId</Keyword>
    <Text>Smooth level</Text>
  </Translation>
  <Translation>
    <Keyword>UseRulerId</Keyword>
    <Text>Use ruler</Text>
  </Translation>
  <Translation>
    <Keyword>UseRulerToolTipId</Keyword>
    <Text>Display a ToolTip of the distance tugged</Text>
  </Translation>
  <Translation>
    <Keyword>RestrictTugToNormalId</Keyword>
    <Text>Tug only straight out of surface</Text>
  </Translation>
  <Translation>
    <Keyword>RestrictTugToNormalToolTipId</Keyword>
    <Text>Restrict the tug direction to the surface normal</Text>
  </Translation>
  <Translation>
    <Keyword>TugProcessingId</Keyword>
    <Text>Modifying the model. This may take a few moments.</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossPatternId</Keyword>
    <Text>Pattern</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossPatternToolTipId</Keyword>
    <Text>Change the pattern used for marking wax</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossTextPatternId</Keyword>
    <Text>Text as pattern</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossTextPatternToolTipId</Keyword>
    <Text>Use text to mark wax</Text>
  </Translation>
  <Translation>
    <Keyword>InvertEmbossPatternId</Keyword>
    <Text>Invert the emboss pattern</Text>
  </Translation>
  <Translation>
    <Keyword>InvertEmbossPatternToolTipId</Keyword>
    <Text>Invert the emboss pattern</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossPreviewId</Keyword>
    <Text>Preview the emboss</Text>
  </Translation>
  <Translation>
    <Keyword>RaiseId</Keyword>
    <Text>Raise</Text>
  </Translation>
  <Translation>
    <Keyword>DepressId</Keyword>
    <Text>Depth</Text>
  </Translation>
  <Translation>
    <Keyword>RaiseToolTipId</Keyword>
    <Text>Add pattern to wax</Text>
  </Translation>
  <Translation>
    <Keyword>DepressToolTipId</Keyword>
    <Text>Remove pattern from wax</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossCurveRaiseId</Keyword>
    <Text>Raise</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossCurveDepressId</Keyword>
    <Text>Lower</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossCurveRaiseToolTipId</Keyword>
    <Text>Raise wax</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossCurveDepressToolTipId</Keyword>
    <Text>Lower wax</Text>
  </Translation>
  <Translation>
    <Keyword>FontId</Keyword>
    <Text>Font:</Text>
  </Translation>
  <Translation>
    <Keyword>SetFontId</Keyword>
    <Text>Set font...</Text>
  </Translation>
  <Translation>
    <Keyword>TextId</Keyword>
    <Text>Text:</Text>
  </Translation>
  <Translation>
    <Keyword>UpdateId</Keyword>
    <Text>Update</Text>
  </Translation>
  <Translation>
    <Keyword>AddOnTopOfRefractoryId</Keyword>
    <Text>Layer on
refractory</Text>
  </Translation>
  <Translation>
    <Keyword>AddOnTopOfRefractoryToolTipId</Keyword>
    <Text>Add the wax as a layer on the refractory instead of layering over existing wax.</Text>
  </Translation>
  <Translation>
    <Keyword>EaseInId</Keyword>
    <Text>Ease In</Text>
  </Translation>
  <Translation>
    <Keyword>EaseInToolTipId</Keyword>
    <Text>Produces a gradual falloff to the boundary over the distance specified.</Text>
  </Translation>
  <Translation>
    <Keyword>RoundId</Keyword>
    <Text>Round</Text>
  </Translation>
  <Translation>
    <Keyword>LinearId</Keyword>
    <Text>Linear</Text>
  </Translation>
  <Translation>
    <Keyword>LinearToolTipId</Keyword>
    <Text>Produces a linear falloff to the boundary over the distance specified</Text>
  </Translation>  
  <Translation>
    <Keyword>FalloffAngleId</Keyword>
    <Text>Falloff angle</Text>
  </Translation>
  <Translation>
    <Keyword>DistanceId</Keyword>
    <Text>Distance</Text>
  </Translation>
  <Translation>
    <Keyword>FalloffDistanceShortId</Keyword>
    <Text>Falloff dist.</Text>
  </Translation>
  <Translation>
    <Keyword>RoundToolTipId</Keyword>
    <Text>Produces a rounded falloff to the boundary over the distance specified</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossDirectionSurfaceNormalId</Keyword>
    <Text>Surface normal</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossDirectionAverageSurfaceNormalId</Keyword>
    <Text>Average surface normal</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossDirectionInsertionAxisId</Keyword>
    <Text>Insertion axis</Text>
  </Translation>
  <Translation>
    <Keyword>DirectionId</Keyword>
    <Text>Direction</Text>
  </Translation>
  <Translation>
    <Keyword>NormalSmoothingId</Keyword>
    <Text>Normal smoothing</Text>
  </Translation>
  <Translation>
    <Keyword>NormalSmoothingToolTipId</Keyword>
    <Text>Strength of normal smoothing</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossCurveAdvancedId</Keyword>
    <Text>Emboss curve advanced</Text>
  </Translation>
  <Translation>
    <Keyword>SelectEmbossCurveId</Keyword>
    <Text>Click one or more end-connected curves that enclose an area of wax.</Text>
  </Translation>
  <Translation>
    <Keyword>ClickInsideAreaToEmbossId</Keyword>
    <Text>Click in the area to emboss.</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossPickCurveOperationId</Keyword>
    <Text>Set the thickness, choose raise or lower, and apply to add or remove wax.</Text>
  </Translation>
  <Translation>
    <Keyword>EmbossApplyingId</Keyword>
    <Text>Modifying the model...</Text>
  </Translation>
  <Translation>
    <Keyword>SelectPolyToolTipId</Keyword>
    <Text>Select mesh area with ball</Text>
  </Translation>
  <Translation>
    <Keyword>SelectPlaneToolToolTipId</Keyword>
    <Text>Select mesh area with plane tool</Text>
  </Translation>
  <Translation>
    <Keyword>SelectWithSeedToolTipId</Keyword>
    <Text>Select mesh area with seed point</Text>
  </Translation>
  <Translation>
    <Keyword>DeselectToolTipId</Keyword>
    <Text>Remove triangles from selection</Text>
  </Translation>
  <Translation>
    <Keyword>ClearSelectionToolTipId</Keyword>
    <Text>Deselect all</Text>
  </Translation>
  <Translation>
    <Keyword>TrimSelectModeId</Keyword>
    <Text>Select polygons with the ball tool</Text>
  </Translation>
  <Translation>
    <Keyword>TrimSelectModeNoMeshId</Keyword>
    <Text>Scan mesh can only be trimmed before survey is applied.</Text>
  </Translation>
  <Translation>
    <Keyword>ColorizeThicknessId</Keyword>
    <Text>Colorize thickness:</Text>
  </Translation>
  <Translation>
    <Keyword>RulerMessageId</Keyword>
    <Text>Measure distance</Text>
  </Translation>
  <Translation>
    <Keyword>RulerMessageToolTipId</Keyword>
    <Text>Measures the distance between two points in the model</Text>
  </Translation>
  <Translation>
    <Keyword>RulerMessageThicknessId</Keyword>
    <Text>Measure thickness</Text>
  </Translation>
  <Translation>
    <Keyword>RulerMessageThicknessToolTipId</Keyword>
    <Text>Touch the location to measure</Text>
  </Translation>
  <Translation>
    <Keyword>MinId</Keyword>
    <Text>Min</Text>
  </Translation>
  <Translation>
    <Keyword>MaxId</Keyword>
    <Text>Max</Text>
  </Translation>
  <Translation>
    <Keyword>ComputingThicknessColorsId</Keyword>
    <Text>Computing thickness colors. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>BallSelectStartMsgId</Keyword>
    <Text>Select wax with the tool</Text>
  </Translation>
  <Translation>
    <Keyword>DeleteSelectionToolTipId</Keyword>
    <Text>Delete selected wax</Text>
  </Translation>
  <Translation>
    <Keyword>RemoveWaxMessageId</Keyword>
    <Text>Removing wax. Please wait...</Text>
  </Translation>
  <Translation>
    <Keyword>AddSelectionToBlockoutToolTipId</Keyword>
    <Text>Add selection to block out wax</Text>
  </Translation>
  <Translation>
    <Keyword>RemoveSelectionToBlockoutToolTipId</Keyword>
    <Text>Remove selection from block out wax</Text>
  </Translation>
  <Translation>
    <Keyword>FalloffId</Keyword>
    <Text>Falloff</Text>
  </Translation>
  <Translation>
    <Keyword>OpacityId</Keyword>
    <Text>Opacity</Text>
  </Translation>
  <Translation>
    <Keyword>LanguageSettingId</Keyword>
    <Text>Language:</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyApronId</Keyword>
    <Text>Apply apron:</Text>
  </Translation>
  <Translation>
    <Keyword>OrId</Keyword>
    <Text>Or</Text>
  </Translation>
  <Translation>
    <Keyword>SelectPartialCadId</Keyword>
    <Text>Select a PartialCad file:</Text>
  </Translation>
  <Translation>
    <Keyword>LoadScanId</Keyword>
    <Text>Load Scan</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThicknessPresetId</Keyword>
    <Text>Presets:</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness1Id</Keyword>
    <Text>Occlusal rest</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness1ToolTipId</Keyword>
    <Text>Occlusal rest thickness (1)</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness2Id</Keyword>
    <Text>Lingual rest</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness2ToolTipId</Keyword>
    <Text>Lingual rest thickness (2)</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness3Id</Keyword>
    <Text>Minor connector</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness3ToolTipId</Keyword>
    <Text>Minor connector thickness (3)</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness4Id</Keyword>
    <Text>Connector</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness4ToolTipId</Keyword>
    <Text>Major connector thickness (4)</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness5Id</Keyword>
    <Text>Mesh</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThickness5ToolTipId</Keyword>
    <Text>Mesh thickness (5)</Text>
  </Translation>
  <Translation>
    <Keyword>ClickToPlaceCurvePointsId</Keyword>
    <Text>Click To Place Curve Points</Text>
  </Translation>
  <Translation>
    <Keyword>DentalProjectNotValidForPartialsId</Keyword>
    <Text>It is best to specify at least one Partial framework tooth.
Without this no workflow, orientation, or material specific settings will be used.  
[ In the DentalDB in options select material configurations 'Partial',
then apply a Partial framework to a tooth of the jaw you want to design on. ]</Text>
  </Translation>
  <Translation>
    <Keyword>MissingAttachmentsId</Keyword>
    <Text>The following attachments could not be located and will not be loaded:
%s
    </Text>
  </Translation>
  <Translation>
    <Keyword>CurveNameId</Keyword>
    <Text>Curve</Text>
  </Translation>
  <Translation>
    <Keyword>FinishLineCurveNumberNameId</Keyword>
    <Text>Finish line curve %d</Text>
  </Translation>
  <Translation>
    <Keyword>CloneThicknessEditId</Keyword>
    <Text>Thickness of wax copied by the tool (If the thickness exceeds that of the piece, the difference will form a gap.)</Text>
  </Translation>
  <Translation>
    <Keyword>CurveEditPointMessageId</Keyword>
    <Text>Click on the curve to insert an edit point or click on an edit point to delete it</Text>
  </Translation>
  <Translation>
    <Keyword>ComputingMaskVolumeId</Keyword>
    <Text>Computing mask volume</Text>
  </Translation>
  <Translation>
    <Keyword>DetermineGpuBoundId</Keyword>
    <Text>Determining Boundary</Text>
  </Translation>
  <Translation>
    <Keyword>SettingupGpuId</Keyword>
    <Text>Setting up Gpu</Text>
  </Translation>
  <Translation>
    <Keyword>SnapMeshToTargetDepthId</Keyword>
    <Text>Snap springloaded mesh to target depth</Text>
  </Translation>
  <Translation>
    <Keyword>RelieveImportedId</Keyword>
    <Text>Add Blockout relief</Text>
  </Translation>
  <Translation>
    <Keyword>ApplyReliefToImportedId</Keyword>
    <Text>Apply relief</Text>
  </Translation>
  <Translation>
    <Keyword>ImportedReliefAMountId</Keyword>
    <Text>Relief</Text>
  </Translation>
  <Translation>
    <Keyword>EditCurveId</Keyword>
    <Text>Edit Curve</Text>
  </Translation>
  <Translation>
    <Keyword>ClickCurveToEditId</Keyword>
    <Text>Click a curve to edit</Text>
  </Translation>
  <Translation>
    <Keyword>AdvancedLoggingId</Keyword>
    <Text>Detailed log messages</Text>
  </Translation>
  <Translation>
    <Keyword>ShowLogId</Keyword>
    <Text>Save Log</Text>
  </Translation>
  <Translation>
    <Keyword>IdExitProfileEditorFirst</Keyword>
    <Text>Please exit the profile editor first</Text>
  </Translation>
  <Translation>
    <Keyword>IdInvalidBound</Keyword>
    <Text>There is no valid bound</Text>
  </Translation>
  <Translation>
    <Keyword>IdInnerContourNotWithinOuter</Keyword>
    <Text>The outer contour doesn't contain the inner contour curve</Text>
  </Translation>
  <Translation>
    <Keyword>IdInnerContourAlreadyExists</Keyword>
    <Text>An outer contour curve can only have one inner countour curve</Text>
  </Translation>
  <Translation>
    <Keyword>IdNoOuterContourForInner</Keyword>
    <Text>There is no outer contour for this inner contour curve</Text>
  </Translation>
  <Translation>
    <Keyword>FillImportedRefractoryToBottomId</Keyword>
    <Text>Fill Imported Part to Bottom</Text>
  </Translation>
  <Translation>
    <Keyword>FeaturePreviewId</Keyword>
    <Text>Pre-release features</Text>
  </Translation>
<Translation>
<Keyword>ResizingWorkspaceId</Keyword>
<Text>The workspace is being resized, please wait..</Text>
</Translation>
<Translation>
<Keyword>RefractoryNeedsToBeVisibleToApplyId</Keyword>
<Text>The refractory needs to be visible before you apply</Text>
</Translation>
<Translation>
<Keyword>SoftwareEULAInformation</Keyword>
<Text>By activating or using this software, you acknowledge the existence of a binding EULA,
based on which this product has been delivered and sublicensed by a distributor entitled by exocad GmbH,
and that anonymous user statistics might be collected in the software for improving the software experience.
In particular, you acknowledge that the sublicense is a „per seat“ license that is limited to one user and computer at a time.
(Note: Sending the statistics to exocad is a separate, optional step and is disabled by default)</Text>
</Translation>
<Translation>
<Keyword>AllowSendingStatisticsId</Keyword>
<Text>Permission to send statistics.</Text>
</Translation>
<Translation>
<Keyword>Permission_To_Send_Statistic_To_Development_Team_ToolTip</Keyword>
<Text>Allow sending advanced anonymous usage statistics to help the development team to fix and improve products and service.
Note: The statistics are anonymous, i.e. no patient or medical data is transfered.</Text>
</Translation>
<Translation>
<Keyword>ShowStatisticsInfoId</Keyword>
<Text>Show Info</Text>
</Translation>
<Translation>
<Keyword>SendStatisticsNowId</Keyword>
<Text>Send Now</Text>
</Translation>
<Translation>
<Keyword>StatisticsId</Keyword>
<Text>Statistics</Text>
</Translation>
<Translation>
<Keyword>InvertStippleId</Keyword>
<Text>Invert pattern</Text>
</Translation>
<Translation>
<Keyword>ApplyOverWaxId</Keyword>
<Text>Apply over wax</Text>
</Translation>
<Translation>
<Keyword>SurveyAutoReduceScanId</Keyword>
<Text>Auto reduce scan</Text>
</Translation>
<Translation>
<Keyword>SurveyAutoReduceScanToolTipId</Keyword>
<Text>A reduced scan size will improve overall performance.
However sometimes you may wish to disable if too much data is removed</Text>
</Translation>
<Translation>
  <Keyword>SurveyBlockOutUndercutsToolTipId</Keyword>
  <Text>Block out undercuts</Text>
</Translation>
<Translation>
  <Keyword>ConnectorReliefEdgeFalloffId</Keyword>
  <Text>Connector margin width</Text>
</Translation>
<Translation>
  <Keyword>EnableAutoReliefId</Keyword>
  <Text>Enable relief</Text>
</Translation>
<Translation>
  <Keyword>SaveEditedBlockoutId</Keyword>
  <Text>With edited blockout</Text>
</Translation>
<Translation>
  <Keyword>EndPostId</Keyword>
  <Text>End Thickness</Text>
</Translation>
<Translation>
  <Keyword>UseFileId</Keyword>
  <Text>Use File</Text>
</Translation>
<Translation>
  <Keyword>UsePostId</Keyword>
  <Text>Use Post</Text>
</Translation>
</Translations>
</TranslationContainer>