Kuara
Kilopat
- Katılım
- 13 Nisan 2014
- Mesajlar
- 1.180
- Makaleler
- 2
- Çözümler
- 2
Daha fazla
- Cinsiyet
- Erkek
Merhaba arkadaşlar, ben bir program indirdim. Ancak nasıl kurulacağını anlamadım, İngilizce bilen varsa bir söyleyebilir mi ? nasıl kuracağımı.
''If you already have got SSQ's USB-Emulator for Mastercam X4-X7 installed you do not need to re-installed it (skip step 3).
1. Install MasterCAM X8 HotFix1 (v17.0.16257.0) Win64
If you already have got MasterCAM X8 (v17.0.14947.0) installed you can install Mastercam X8 HotFix1 patch only
to do it:
1.1. Copy all folders and files from archive "MC_X8_17.0.14947.0_orig.zip" to <Mastercam X8 progdir> (by default C:\Program Files\mcamX8\ ) and overwrite original ones
1.2. Run "mastercamx8-hf1-x64-patch-only.exe" and install HotFix1 for Mastercam X8
If you have no got MasterCAM X8 (v17.0.14947.0) installed you can install Mastercam X8 HotFix1 full setup
to do it:
1.3. Run "mastercamx8-hf1-x64-full-setup.exe" and install HotFix1 for Mastercam X8
2. Copy all files and folders from "MC_X8_HotFix1_v17.0.16257.0_patched.zip" to <mastercam X8 progdir> (by default C:\Program Files\mcamX8\ ) and overwrite original ones
3. Install USB-Emulator
ATTENTION!
To install emulator you need Administrator rights!
To install emulator for 64bit Win Vista or Win7 you need to boot computer in mofe F8 > "Disable Driver Signature Enforcement"
Moreover you need to use boot mode F8 > "Disable Driver Signature Enforcement" at every reboot of computer!
3.1. Copy folder "USB_Emul_Win32" to C:
3.2. Run (as Administrator) "mcam_X5_X7_hasp_SSQ.reg" for SIM Type > HASP setup or "mcam_X5_X7_nethasp_SSQ.reg" for SIM Type > NetHASP and confirm to add info in Windows Registry
3.3. Run ..\USB_Emul_Win32\install.bat and wait until system will find and install new devices
If setup is succesfull you have to see new devices:
Device Manager -> Universal Serial Bus controllers -> SafNet inc. HASP key
Device Manager -> Universal Serial Bus controllers -> SafNet inc. USB key
That's all''
''If you already have got SSQ's USB-Emulator for Mastercam X4-X7 installed you do not need to re-installed it (skip step 3).
1. Install MasterCAM X8 HotFix1 (v17.0.16257.0) Win64
If you already have got MasterCAM X8 (v17.0.14947.0) installed you can install Mastercam X8 HotFix1 patch only
to do it:
1.1. Copy all folders and files from archive "MC_X8_17.0.14947.0_orig.zip" to <Mastercam X8 progdir> (by default C:\Program Files\mcamX8\ ) and overwrite original ones
1.2. Run "mastercamx8-hf1-x64-patch-only.exe" and install HotFix1 for Mastercam X8
If you have no got MasterCAM X8 (v17.0.14947.0) installed you can install Mastercam X8 HotFix1 full setup
to do it:
1.3. Run "mastercamx8-hf1-x64-full-setup.exe" and install HotFix1 for Mastercam X8
2. Copy all files and folders from "MC_X8_HotFix1_v17.0.16257.0_patched.zip" to <mastercam X8 progdir> (by default C:\Program Files\mcamX8\ ) and overwrite original ones
3. Install USB-Emulator
ATTENTION!
To install emulator you need Administrator rights!
To install emulator for 64bit Win Vista or Win7 you need to boot computer in mofe F8 > "Disable Driver Signature Enforcement"
Moreover you need to use boot mode F8 > "Disable Driver Signature Enforcement" at every reboot of computer!
3.1. Copy folder "USB_Emul_Win32" to C:
3.2. Run (as Administrator) "mcam_X5_X7_hasp_SSQ.reg" for SIM Type > HASP setup or "mcam_X5_X7_nethasp_SSQ.reg" for SIM Type > NetHASP and confirm to add info in Windows Registry
3.3. Run ..\USB_Emul_Win32\install.bat and wait until system will find and install new devices
If setup is succesfull you have to see new devices:
Device Manager -> Universal Serial Bus controllers -> SafNet inc. HASP key
Device Manager -> Universal Serial Bus controllers -> SafNet inc. USB key
That's all''