DMESG ÇIKTISI.
------------------------------------
[ 1.262270] pci 0000:00:01.7: Adding to iommu group 2
[ 1.262286] pci 0000:00:08.0: Adding to iommu group 3
[ 1.262297] pci 0000:00:08.1: Adding to iommu group 4
[ 1.262309] pci 0000:00:08.2: Adding to iommu group 5
[ 1.262327] pci 0000:00:14.0: Adding to iommu group 6
[ 1.262335] pci 0000:00:14.3: Adding to iommu group 6
[ 1.262366] pci 0000:00:18.0: Adding to iommu group 7
[ 1.262376] pci 0000:00:18.1: Adding to iommu group 7
[ 1.262385] pci 0000:00:18.2: Adding to iommu group 7
[ 1.262393] pci 0000:00:18.3: Adding to iommu group 7
[ 1.262402] pci 0000:00:18.4: Adding to iommu group 7
[ 1.262410] pci 0000:00:18.5: Adding to iommu group 7
[ 1.262418] pci 0000:00:18.6: Adding to iommu group 7
[ 1.262426] pci 0000:00:18.7: Adding to iommu group 7
[ 1.262443] pci 0000:01:00.0: Adding to iommu group 8
[ 1.262472] pci 0000:03:00.0: Adding to iommu group 9
[ 1.262498] pci 0000:03:00.1: Adding to iommu group 10.
[ 1.262511] pci 0000:03:00.2: Adding to iommu group 10.
[ 1.262524] pci 0000:03:00.3: Adding to iommu group 10.
[ 1.262538] pci 0000:03:00.5: Adding to iommu group 10.
[ 1.262552] pci 0000:03:00.6: Adding to iommu group 10.
[ 1.262563] pci 0000:04:00.0: Adding to iommu group 11.
[ 1.264245] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 1.264256] pci 0000:00:00.2: PCI INT A: not connected.
[ 1.264675] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40.
[ 1.264678] AMD-Vi: Extended features (0x4f77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC.
[ 1.264685] AMD-Vi: Interrupt remapping enabled.
[ 1.264742] AMD-Vi: Virtual APIC enabled.
[ 1.264926] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.264929] software IO TLB: mapped [mem 0x00000000c79f8000-0x00000000cb9f8000] (64MB)
[ 1.265030] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 1.265831] Initialise system trusted keyrings.
[ 1.265847] Key type blacklist registered.
[ 1.265907] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.265926] zbud: loaded.
[ 1.266264] squashfs: version 4.0 (2009/01/31) Phillip Lougher.
[ 1.266352] fuse: init (API version 7.38)
[ 1.266511] integrity: Platform Keyring initialized.
[ 1.266520] integrity: Machine keyring initialized.
[ 1.277897] Key type asymmetric registered.
[ 1.277903] Asymmetric key parser 'x509' registered.
[ 1.277938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 1.277998] io scheduler mq-deadline registered.
[ 1.279528] pcieport 0000:00:01.6: PME: Signaling with IRQ 26.
[ 1.279625] pcieport 0000:00:01.6: AER: enabled with IRQ 26.
[ 1.279928] pcieport 0000:00:01.7: PME: Signaling with IRQ 27.
[ 1.280010] pcieport 0000:00:01.7: AER: enabled with IRQ 27.
[ 1.280040] pcieport 0000:00:01.7: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.280323] pcieport 0000:00:08.1: PME: Signaling with IRQ 28.
[ 1.280588] pcieport 0000:00:08.2: PME: Signaling with IRQ 29.
[ 1.280651] pcieport 0000:00:08.2: AER: enabled with IRQ 29.
[ 1.280755] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.352552] ACPI: AC: AC Adapter [ACAD] (off-line)
[ 1.352702] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.352736] ACPI: button: Power Button [PWRB]
[ 1.352790] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.352813] ACPI: button: Lid Switch [LID]
[ 1.352849] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.353008] ACPI: button: Power Button [PWRF]
[ 1.353212] Monitor-Mwait will be used to enter C-1 state.
[ 1.353221] ACPI: \_PR_.P000: Found 2 idle states.
[ 1.353355] ACPI: \_PR_.P001: Found 2 idle states.
[ 1.353458] ACPI: \_PR_.P002: Found 2 idle states.
[ 1.353561] ACPI: \_PR_.P003: Found 2 idle states.
[ 1.374526] thermal LNXTHERM:00: registered as thermal_zone0.
[ 1.374537] ACPI: thermal: Thermal Zone [THRM] (38 C)
[ 1.375132] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled.
[ 1.377248] Linux agpgart interface v0.103
[ 1.477645] ACPI: battery: Slot [BAT0] (battery present)
[ 1.508545] tpm tpm0: AMD fTPM version 0x3005700000004 causes system stutter; hwrng disabled.
[ 1.511807] loop: module loaded.
[ 1.512257] tun: Universal TUN/TAP device driver, 1.6
[ 1.512303] PPP generic driver version 2.4.2
[ 1.512516] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.512520] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.517668] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.517814] mousedev: PS/2 mouse device common for all mice.
[ 1.518652] rtc_cmos 00:01: RTC can wake from S4.
[ 1.518967] rtc_cmos 00:01: registered as rtc0.
[ 1.519015] rtc_cmos 00:01: setting system clock to 2023-09-26T14:04:01 UTC (1695737041)
[ 1.519066] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs.
[ 1.519078] i2c_dev: i2c /dev entries driver.
[ 1.519167] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.519192] device-mapper: uevent: version 1.0.3
[ 1.519236] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 1.519265] platform eisa.0: Probing EISA bus 0
[ 1.519269] platform eisa.0: EISA: Cannot allocate resource for mainboard.
[ 1.519271] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.519273] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.519275] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.519277] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.519279] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.519280] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.519282] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.519284] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.519285] platform eisa.0: EISA: Detected 0 cards.
[ 1.519610] ledtrig-cpu: registered to indicate activity on CPUs.
[ 1.519642] efifb: probing for efifb.
[ 1.519680] efifb: showing boot graphics.
[ 1.520959] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k.
[ 1.520962] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 1.520964] efifb: scrolling: redraw.
[ 1.520965] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.521020] fbcon: Deferring console take-over
[ 1.521022] fb0: EFI VGA frame buffer device.
[ 1.521221] drop_monitor: Initializing network drop monitor service.
[ 1.542293] NET: Registered PF_INET6 protocol family.
[ 1.605059] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.159033] Freeing initrd memory: 144296K.
[ 2.165805] Segment Routing with IPv6.
[ 2.165834] In-situ OAM (IOAM) with IPv6.
[ 2.165887] NET: Registered PF_PACKET protocol family.
[ 2.165932] Key type dns_resolver registered.
[ 2.166459] microcode: CPU1: patch_level=0x08108109
[ 2.166459] microcode: CPU0: patch_level=0x08108109
[ 2.166460] microcode: CPU2: patch_level=0x08108109
[ 2.166462] microcode: CPU3: patch_level=0x08108109
[ 2.166475] microcode: Microcode Update Driver: v2.2.
[ 2.166484] IPI shorthand broadcast: enabled.
[ 2.167817] sched_clock: Marking stable (2165981866, 323680)->(2169999844, -3694298)
[ 2.168063] registered taskstats version 1
[ 2.168270] Loading compiled-in X.509 certificates.
[ 2.169065] Loaded X.509 cert 'Build time autogenerated kernel key: 505f0cb41da65a7ebed3e8e9ed5364fb4a8fc5c3'
[ 2.169770] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 2.170457] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 2.170459] blacklist: Loading compiled-in revocation X.509 certificates.
[ 2.170483] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 2.170505] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[ 2.170525] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[ 2.170545] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[ 2.170567] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[ 2.170588] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[ 2.170610] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[ 2.170632] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[ 2.171427] zswap: loaded using pool lzo/zbud
[ 2.173121] Key type .fscrypt registered.
[ 2.173123] Key type fscrypt-provisioning registered.
[ 2.173266] Key type trusted registered.
[ 2.176312] Key type encrypted registered.
[ 2.176318] AppArmor: AppArmor sha1 policy hashing enabled.
[ 2.176442] integrity: Loading X.509 certificate: UEFI:db
[ 2.176481] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
[ 2.176483] integrity: Loading X.509 certificate: UEFI:db
[ 2.176505] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 2.176506] integrity: Loading X.509 certificate: UEFI:db
[ 2.176526] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 2.177308] Loading compiled-in module X.509 certificates.
[ 2.177800] Loaded X.509 cert 'Build time autogenerated kernel key: 505f0cb41da65a7ebed3e8e9ed5364fb4a8fc5c3'
[ 2.177802] ima: Allocated hash algorithm: sha1.
[ 2.276623] tsc: Refined TSC clocksource calibration: 2596.607 MHz.
[ 2.276645] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256db715939, max_idle_ns: 440795308474 ns.
[ 2.276706] clocksource: Switched to clocksource tsc.
[ 2.312754] ima: No architecture policies found.
[ 2.312796] evm: Initialising EVM extended attributes:
[ 2.312798] evm: security.selinux
[ 2.312800] evm: security.SMACK64
[ 2.312802] evm: security.SMACK64EXEC
[ 2.312803] evm: security.SMACK64TRANSMUTE
[ 2.312805] evm: security.SMACK64MMAP
[ 2.312806] evm: security.apparmor
[ 2.312807] evm: security.ima
[ 2.312808] evm: security.capability
[ 2.312810] evm: HMAC attrs: 0x1.
[ 2.313396] PM: Magic number: 7:969:81
[ 2.313849] acpi_cpufreq: overriding BIOS provided _PSD data.
[ 2.314317] RAS: Correctable Errors collector initialized.
[ 2.317930] Freeing unused decrypted memory: 2036K.
[ 2.319300] Freeing unused kernel image (initmem) memory: 4764K.
[ 2.332739] Write protecting the kernel read-only data: 34816k.
[ 2.333466] Freeing unused kernel image (rodata/data gap) memory: 1624K.
[ 2.434410] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.434430] Run /init as init process.
[ 2.434432] with arguments:
[ 2.434434] /init
[ 2.434435] splash.
[ 2.434436] with environment:
[ 2.434437] HOME=/
[ 2.434438] TERM=linux
[ 2.434439] BOOT_IMAGE=/boot/vmlinuz-6.2.0-33-generic
[ 2.837806] hid: raw HID events driver (C) Jiri Kosina.
[ 2.854269] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.854855] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 3.024271] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.024283] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection.
[ 3.027819] xhci_hcd 0000:03:00.3: xHCI Host Controller.
[ 3.027835] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
[ 3.028170] xhci_hcd 0000:03:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000004000000490.
[ 3.028930] xhci_hcd 0000:03:00.3: xHCI Host Controller.
[ 3.028942] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
[ 3.028950] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed.
[ 3.029130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 3.029138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.029143] usb usb1: Product: xHCI Host Controller.
[ 3.029147] usb usb1: Manufacturer: Linux 6.2.0-33-generic xhci-hcd
[ 3.029151] usb usb1: SerialNumber: 0000:03:00.3
[ 3.029671] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20.
[ 3.030428] hub 1-0:1.0: USB hub found.
[ 3.030493] hub 1-0:1.0: 6 ports detected.
[ 3.030818] ahci 0000:04:00.0: version 3.0
[ 3.032707] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.033243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 3.033252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.033256] usb usb2: Product: xHCI Host Controller.
[ 3.033259] usb usb2: Manufacturer: Linux 6.2.0-33-generic xhci-hcd
[ 3.033262] usb usb2: SerialNumber: 0000:03:00.3
[ 3.033479] hub 2-0:1.0: USB hub found.
[ 3.033502] hub 2-0:1.0: 4 ports detected.
[ 3.041435] ahci 0000:04:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode.
[ 3.041476] ahci 0000:04:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part.
[ 3.042585] scsi host0: ahci.
[ 3.043506] scsi host1: ahci.
[ 3.043646] ata1: DUMMY.
[ 3.043681] ata2: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00180 irq 39.
[ 3.085199] cryptd: max_cpu_qlen set to 1000.
[ 3.086142] ACPI: bus type drm_connector registered.
[ 3.104231] input: SYNA3296:00 06CB:CD50 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA3296:00/0018:06CB:CD50.0001/input/input5
[ 3.104793] input: SYNA3296:00 06CB:CD50 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA3296:00/0018:06CB:CD50.0001/input/input6
[ 3.105001] hid-generic 0018:06CB:CD50.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3296:00 06CB:CD50] on i2c-SYNA3296:00
[ 3.288358] usb 1-2: new high-speed USB device number 2 using xhci_hcd.
[ 3.438152] usb 1-2: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00
[ 3.438165] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.438170] usb 1-2: Product: USB2.0 HUB.
[ 3.477174] hub 1-2:1.0: USB hub found.
[ 3.477503] hub 1-2:1.0: 4 ports detected.
[ 3.520402] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.523321] ata2.00: ATA-11: SAMSUNG MZNLH128HBHQ-000H1, RVT22H0Q, max UDMA/100
[ 3.524062] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA.
[ 3.525404] ata2.00: Features: Dev-Sleep NCQ-sndrcv
[ 3.527955] ata2.00: configured for UDMA/100
[ 3.528225] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZNLH128 2H0Q PQ: 0 ANSI: 5
[ 3.528870] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.528922] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 3.528930] sd 1:0:0:0: [sda] 4096-byte physical blocks.
[ 3.528957] sd 1:0:0:0: [sda] Write Protect is off.
[ 3.528963] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00.
[ 3.529007] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA.
[ 3.529063] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes.
[ 3.546295] sda: sda1 sda2.
[ 3.546457] sd 1:0:0:0: [sda] Attached SCSI disk.
[ 3.559651] AVX2 version of gcm_enc/dec engaged.
[ 3.559715] AES CTR mode by8 optimization enabled.
[ 3.607993] AMD-Vi: AMD IOMMUv2 loaded and initialized.
[ 3.608361] usb 1-3: new high-speed USB device number 3 using xhci_hcd.
[ 3.766058] usb 1-3: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00
[ 3.766071] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.766075] usb 1-3: Product: USB2.0 HUB.
[ 3.828919] hub 1-3:1.0: USB hub found.
[ 3.829145] hub 1-3:1.0: 4 ports detected.
[ 3.844353] usb 1-2.2: new full-speed USB device number 4 using xhci_hcd.
[ 3.960587] usb 1-2.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=25.20
[ 3.960594] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.960596] usb 1-2.2: Product: CSR8510 A10.
[ 4.080340] usb 1-4: new full-speed USB device number 5 using xhci_hcd.
[ 4.259412] usb 1-4: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10
[ 4.259420] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.259424] usb 1-4: Product: Bluetooth Radio.
[ 4.259426] usb 1-4: Manufacturer: Realtek.
[ 4.259429] usb 1-4: SerialNumber: 00e04c000001.
[ 4.320341] usb 1-2.3: new low-speed USB device number 6 using xhci_hcd.
[ 4.453358] usb 1-2.3: New USB device found, idVendor=0e6a, idProduct=02c0, bcdDevice=9f.01
[ 4.453365] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.453367] usb 1-2.3: Manufacturer: DaKai.
[ 4.548350] usb 1-5: new high-speed USB device number 7 using xhci_hcd.
[ 4.699273] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[ 4.699279] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.699282] usb 1-5: Product: USB2.0 Hub.
[ 4.756657] hub 1-5:1.0: USB hub found.
[ 4.757006] hub 1-5:1.0: 4 ports detected.
[ 4.776349] usb 1-2.4: new low-speed USB device number 8 using xhci_hcd.
[ 4.893127] usb 1-2.4: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[ 4.893136] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.893139] usb 1-2.4: Product: Usb Mouse.
[ 4.893141] usb 1-2.4: Manufacturer: SIGMACHIP.
[ 5.052353] usb 1-5.2: new high-speed USB device number 9 using xhci_hcd.
[ 5.172625] usb 1-5.2: New USB device found, idVendor=30c9, idProduct=0013, bcdDevice= 0.01
[ 5.172631] usb 1-5.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.172634] usb 1-5.2: Product: HP TrueVision HD Camera.
[ 5.172636] usb 1-5.2: Manufacturer: DJKCVA19IE5NB7.
[ 5.172638] usb 1-5.2: SerialNumber: 0001.
[ 6.896513] input: DaKai as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2.3/1-2.3:1.0/0003:0E6A:02C0.0002/input/input8
[ 6.902752] [drm] amdgpu kernel modesetting enabled.
[ 6.906792] amdgpu: Topology: Add APU node [0x0:0x0]
[ 6.906985] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[ 6.907063] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x103C:0x87B7 0xC4).
[ 6.956644] hid-generic 0003:0E6A:02C0.0002: input,hidraw1: USB HID v1.11 Keyboard [DaKai] on usb-0000:03:00.3-2.3/input0
[ 6.966068] [drm] register mmio base: 0xFCD00000.
[ 6.966072] [drm] register mmio size: 524288.
[ 6.966190] [drm] add ip block number 0 <soc15_common>
[ 6.966192] [drm] add ip block number 1 <gmc_v9_0>
[ 6.966195] [drm] add ip block number 2 <vega10_ih>
[ 6.966197] [drm] add ip block number 3 <psp>
[ 6.966199] [drm] add ip block number 4 <powerplay>
[ 6.966201] [drm] add ip block number 5 <dm>
[ 6.966203] [drm] add ip block number 6 <gfx_v9_0>
[ 6.966205] [drm] add ip block number 7 <sdma_v4_0>
[ 6.966207] [drm] add ip block number 8 <vcn_v1_0>
[ 6.966301] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT.
[ 6.966306] amdgpu: ATOM BIOS: 113-RAVEN2-117
[ 6.966363] [drm] VCN decode is enabled in VM mode.
[ 6.966365] [drm] VCN encode is enabled in VM mode.
[ 6.966367] [drm] JPEG decode is enabled in VM mode.
[ 6.966529] amdgpu 0000:03:00.0: vgaarb: deactivate vga console.
[ 6.966534] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled.
[ 6.966616] [drm] vm size is 262144 GB, 3 levels, block size is 9-bit, fragment size is 9-bit
[ 6.966627] amdgpu 0000:03:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 6.966631] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF.
[ 6.966634] amdgpu 0000:03:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF.
[ 6.966645] [drm] Detected VRAM RAM=2048M, BAR=2048M
[ 6.966647] [drm] RAM width 128bits DDR4.
[ 6.966779] [drm] amdgpu: 2048M of VRAM memory ready.
[ 6.966782] [drm] amdgpu: 3072M of GTT memory ready.
[ 6.966802] [drm] GART: num cpu pages 262144, num gpu pages 262144.
[ 6.967168] [drm] PCIE GART of 1024M enabled.
[ 6.967172] [drm] PTB located at 0x000000F400A00000.
[ 6.967513] input: DaKai Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2.3/1-2.3:1.1/0003:0E6A:02C0.0003/input/input9
[ 6.967687] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist.
[ 6.967691] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist.
[ 6.967903] amdgpu: hwmgr_sw_init smu backed is smu10_smu.
[ 6.969599] [drm] Found VCN firmware Version ENC: 1.13 DEC: 2 VEP: 0 Revision: 3
[ 6.969612] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware.
[ 6.990875] [drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR.
[ 7.024644] input: DaKai System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2.3/1-2.3:1.1/0003:0E6A:02C0.0003/input/input10
[ 7.024808] input: DaKai Keyboard as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2.3/1-2.3:1.1/0003:0E6A:02C0.0003/input/input12
[ 7.025093] hid-generic 0003:0E6A:02C0.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [DaKai] on usb-0000:03:00.3-2.3/input1
[ 7.030411] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2.4/1-2.4:1.0/0003:1C4F:0034.0004/input/input13
[ 7.030657] hid-generic 0003:1C4F:0034.0004: input,hidraw3: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:03:00.3-2.4/input0
[ 7.030769] usbcore: registered new interface driver usbhid.
[ 7.030775] usbhid: USB HID core driver.
[ 7.040861] [drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[ 7.040870] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[ 7.041509] [drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[ 7.041512] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[ 7.042253] [drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[ 7.042255] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[ 7.075229] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available.
[ 7.086918] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available.
[ 7.086920] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available.
[ 7.087242] [drm] DM_PPLIB: values for F clock.
[ 7.087244] [drm] DM_PPLIB: 400000 in kHz, 3174 in mV.
[ 7.087246] [drm] DM_PPLIB: 933000 in kHz, 3724 in mV.
[ 7.087247] [drm] DM_PPLIB: 1067000 in kHz, 3924 in mV.
[ 7.087248] [drm] DM_PPLIB: 1200000 in kHz, 4074 in mV.
[ 7.087250] [drm] DM_PPLIB: values for DCF clock.
[ 7.087251] [drm] DM_PPLIB: 300000 in kHz, 3174 in mV.
[ 7.087253] [drm] DM_PPLIB: 600000 in kHz, 3724 in mV.
[ 7.087254] [drm] DM_PPLIB: 626000 in kHz, 3924 in mV.
[ 7.087255] [drm] DM_PPLIB: 654000 in kHz, 4074 in mV.
[ 7.088256] [drm] Display Core initialized with v3.2.215!
[ 7.182758] [drm] kiq ring mec 2 pipe 1 q 0
[ 7.198010] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[ 7.201681] kfd kfd: amdgpu: Allocated 3969056 bytes on gart.
[ 7.201798] amdgpu: sdma_bitmap: 3
[ 7.232271] memmap_init_zone_device initialised 524288 pages in 8ms.
[ 7.232289] amdgpu: HMM registered 2048MB device memory.
[ 7.232455] amdgpu: Topology: Add APU node [0x15d8:0x1002]
[ 7.232464] kfd kfd: amdgpu: added device 1002:15d8
[ 7.232578] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 3, active_cu_number 3
[ 7.232847] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 7.232855] amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
[ 7.232860] amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
[ 7.232864] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
[ 7.232869] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
[ 7.232873] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
[ 7.232877] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
[ 7.232881] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
[ 7.232885] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
[ 7.232889] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
[ 7.232893] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
[ 7.232910] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 13 on hub 0
[ 7.232915] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[ 7.232920] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[ 7.232925] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 7.232930] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 7.232935] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 7.242621] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:03:00.0 on minor 0
[ 7.252590] fbcon: amdgpudrmfb (fb0) is primary device.
[ 7.252601] fbcon: Deferring console take-over
[ 7.252611] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device.
[ 7.712337] raid6: avx2x4 gen() 15492 MB/s
[ 7.780337] raid6: avx2x2 gen() 17415 MB/s
[ 7.848338] raid6: avx2x1 gen() 15460 MB/s
[ 7.848340] raid6: using algorithm avx2x2 gen() 17415 MB/s
[ 7.916336] raid6: .... xor() 10885 MB/s, rmw enabled.
[ 7.916338] raid6: using avx2x2 recovery algorithm.
[ 7.917541] xor: measuring software checksum speed.
[ 7.918230] prefetch64-sse : 14354 MB/sec
[ 7.918987] generic_sse : 13035 MB/sec
[ 7.918988] xor: using function: prefetch64-sse (14354 MB/sec)
[ 8.065134] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[ 8.124492] EXT4-fs (sda2): mounted filesystem 4cdf4626-aa10-4348-a579-076b4d978104 with ordered data mode. Quota mode: none.
[ 8.325488] systemd[1]: Inserted module 'autofs4'.
[ 8.359930] systemd[1]: systemd 249.11-0ubuntu3.10 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 8.360104] systemd[1]: Detected architecture x86-64.
[ 8.681092] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.706026] systemd[1]: Created slice Slice /system/modprobe.
[ 8.706725] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 8.707114] systemd[1]: Created slice User and Session Slice.
[ 8.707241] systemd[1]: Started ntp-systemd-netif.path.
[ 8.707378] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.707728] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.707915] systemd[1]: Reached target User and Group Name Lookups.
[ 8.707970] systemd[1]: Reached target Remote File Systems.
[ 8.708021] systemd[1]: Reached target Slice Units.
[ 8.708094] systemd[1]: Reached target Local Verity Protected Volumes.
[ 8.708272] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.708531] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.708715] systemd[1]: Listening on Syslog Socket.
[ 8.710593] systemd[1]: Listening on Process Core Dump Socket.
[ 8.710735] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.710830] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.711096] systemd[1]: Listening on Journal Audit Socket.
[ 8.711278] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.711448] systemd[1]: Listening on Journal Socket.
[ 8.711649] systemd[1]: Listening on udev Control Socket.
[ 8.711803] systemd[1]: Listening on udev Kernel Socket.
[ 8.713184] systemd[1]: Mounting Huge Pages File System...
[ 8.714503] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.716017] systemd[1]: Mounting Kernel Debug File System...
[ 8.717591] systemd[1]: Mounting Kernel Trace File System...
[ 8.722851] systemd[1]: Starting Journal Service...
[ 8.723141] systemd[1]: Finished Availability of block devices.
[ 8.725333] systemd[1]: Starting Set the console keyboard layout...
[ 8.727097] systemd[1]: Starting Create List of Static Device Nodes...
[ 8.728879] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 8.731073] systemd[1]: Starting Load Kernel Module configfs...
[ 8.734687] systemd[1]: Starting Load Kernel Module drm...
[ 8.736777] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 8.738740] systemd[1]: Starting Load Kernel Module fuse...
[ 8.739026] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.743754] systemd[1]: Starting Load Kernel Modules...
[ 8.746671] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.748825] systemd[1]: Starting Coldplug All udev Devices...
[ 8.754817] systemd[1]: Mounted Huge Pages File System.
[ 8.755244] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.755519] systemd[1]: Mounted Kernel Debug File System.
[ 8.755797] systemd[1]: Mounted Kernel Trace File System.
[ 8.756597] systemd[1]: Finished Create List of Static Device Nodes.
[ 8.757257] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 8.757710] systemd[1]: Finished Load Kernel Module configfs.
[ 8.758091] pstore: Using crash dump compression: deflate.
[ 8.758488] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 8.759014] systemd[1]: Finished Load Kernel Module drm.
[ 8.759791] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 8.760340] systemd[1]: Finished Load Kernel Module fuse.
[ 8.762869] EXT4-fs (sda2): re-mounted 4cdf4626-aa10-4348-a579-076b4d978104. Quota mode: none.
[ 8.765908] pstore: Registered efi_pstore as persistent store backend.
[ 8.766723] systemd[1]: Mounting FUSE Control File System...
[ 8.768479] systemd[1]: Mounting Kernel Configuration File System...
[ 8.772133] lp: driver loaded but no devices found.
[ 8.772304] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 8.772806] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 8.773443] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 8.773858] systemd[1]: Mounted FUSE Control File System.
[ 8.776311] systemd[1]: Activating swap /swapfile...
[ 8.777172] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 8.779745] ppdev: user-space parallel port driver.
[ 8.779761] systemd[1]: Starting Load/Save Random Seed...
[ 8.781865] systemd[1]: Starting Create System Users...
[ 8.794222] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 8.794550] systemd[1]: Mounted Kernel Configuration File System.
[ 8.795730] Adding 2097148k swap on /swapfile. Priority:-2 extents:5 across:44171264k SSFS.
[ 8.795911] systemd[1]: Activated swap /swapfile.
[ 8.796102] systemd[1]: Reached target Swaps.
[ 8.799039] systemd[1]: Finished Load/Save Random Seed.
[ 8.799731] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 8.807169] systemd[1]: Finished Create System Users.
[ 8.807902] systemd[1]: Finished Load Kernel Modules.
[ 8.810013] systemd[1]: Starting Apply Kernel Variables...
[ 8.811621] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.828771] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 8.834704] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 8.852662] systemd[1]: Finished Apply Kernel Variables.
[ 8.876969] systemd[1]: Finished Set the console keyboard layout.
[ 8.877301] systemd[1]: Reached target Preparation for Local File Systems.
[ 8.888453] systemd[1]: Started Journal Service.
[ 8.919330] systemd-journald[293]: Received client request to flush runtime journal.
[ 9.243594] input: Wireless hotkeys as /devices/virtual/input/input14
[ 9.482135] snd_pci_acp3x 0000:03:00.5: enabling device (0000 -> 0002)
[ 9.483149] snd_pci_acp3x 0000:03:00.5: ACP audio mode : 1
[ 9.495910] ccp 0000:03:00.2: enabling device (0000 -> 0002)
[ 9.507699] ccp 0000:03:00.2: ccp enabled.
[ 9.517930] ccp 0000:03:00.2: tee enabled.
[ 9.517941] ccp 0000:03:00.2: psp enabled.
[ 9.549295] cfg80211: Loading compiled-in X.509 certificates for regulatory database.
[ 9.550009] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'.
[ 9.584495] mc: Linux media interface: v0.10
[ 9.731149] videodev: Linux video capture interface: v2.00
[ 9.779966] Bluetooth: Core ver 2.22
[ 9.780003] NET: Registered PF_BLUETOOTH protocol family.
[ 9.780005] Bluetooth: HCI device and connection manager initialized.
[ 9.780013] Bluetooth: HCI socket layer initialized.
[ 9.780017] Bluetooth: L2CAP socket layer initialized.
[ 9.780025] Bluetooth: SCO socket layer initialized.
[ 9.820871] usb 1-5.2: Found UVC 1.00 device HP TrueVision HD Camera (30c9:0013)
[ 9.822973] usbcore: registered new interface driver btusb.
[ 9.825770] Bluetooth: hci1: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
[ 9.826504] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 9.826512] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 9.826516] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 9.827251] Bluetooth: hci1: RTL: rom_version status=0 version=1
[ 9.827260] Bluetooth: hci1: RTL: loading rtl_bt/rtl8821c_fw.bin
[ 9.829198] Bluetooth: hci1: RTL: loading rtl_bt/rtl8821c_config.bin
[ 9.829497] Bluetooth: hci1: RTL: cfg_sz 10, total sz 34926.
[ 9.830189] rtw_8821ce 0000:01:00.0: enabling device (0000 -> 0003)
[ 9.837222] rtw_8821ce 0000:01:00.0: Firmware version 24.8.0, H2C version 12.
[ 9.843072] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 9.887175] input: HP TrueVision HD Camera: HP Tru as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-5/1-5.2/1-5.2:1.0/input/input16
[ 9.917833] usbcore: registered new interface driver uvcvideo.
[ 9.934281] input: SYNA3296:00 06CB:CD50 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA3296:00/0018:06CB:CD50.0001/input/input17
[ 9.960282] input: SYNA3296:00 06CB:CD50 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA3296:00/0018:06CB:CD50.0001/input/input18
[ 9.969493] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer.
[ 9.969503] RAPL PMU: hw unit of domain package 2^-16 Joules.
[ 9.969651] hid-multitouch 0018:06CB:CD50.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3296:00 06CB:CD50] on i2c-SYNA3296:00
[ 9.970789] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[ 9.970944] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client.
[ 9.971495] snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002)
[ 9.980781] 8821ce: loading out-of-tree module taints kernel.
[ 9.983755] 8821ce: module verification failed: signature and/or required key missing - tainting kernel.
[ 9.990274] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 9.992125] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input20
[ 10.357737] rtw_8821ce 0000:01:00.0 wlo1: renamed from wlan0.
[ 10.362791] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.362805] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.362810] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.362815] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 10.362818] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 10.362822] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 10.362825] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 10.379383] SVM: TSC scaling supported.
[ 10.379393] kvm: Nested Virtualization enabled.
[ 10.379395] SVM: kvm: Nested Paging enabled.
[ 10.379398] SEV supported: 16 ASIDs.
[ 10.379400] SEV-ES supported: 4294967295 ASIDs.
[ 10.379433] SVM: Virtual VMLOAD VMSAVE supported.
[ 10.379434] SVM: Virtual GIF supported.
[ 10.379435] SVM: LBR virtualization supported.
[ 10.400472] MCE: In-kernel MCE decoding enabled.
[ 10.415882] intel_rapl_common: Found RAPL domain package.
[ 10.415892] intel_rapl_common: Found RAPL domain core.
[ 10.480909] Bluetooth: hci1: RTL: fw version 0x75b8f098.
[ 10.642036] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input21
[ 10.642130] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input22
[ 10.729459] znvpair: module license 'CDDL' taints kernel.
[ 10.729467] Disabling lock debugging due to kernel taint.
[ 11.619070] ZFS: Loaded module v2.1.9-2ubuntu1.1, ZFS pool version 5000, ZFS filesystem version 5
[ 11.710808] audit: type=1400 audit(1695737051.685:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=586 comm="apparmor_parser"
[ 11.711110] audit: type=1400 audit(1695737051.685:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=587 comm="apparmor_parser"
[ 11.711115] audit: type=1400 audit(1695737051.685:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=587 comm="apparmor_parser"
[ 11.719710] audit: type=1400 audit(1695737051.693:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/redshift" pid=590 comm="apparmor_parser"
[ 11.719847] audit: type=1400 audit(1695737051.693:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=588 comm="apparmor_parser"
[ 11.719853] audit: type=1400 audit(1695737051.693:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=588 comm="apparmor_parser"
[ 11.719858] audit: type=1400 audit(1695737051.693:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=588 comm="apparmor_parser"
[ 11.719862] audit: type=1400 audit(1695737051.693:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=588 comm="apparmor_parser"
[ 11.720271] audit: type=1400 audit(1695737051.693:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=585 comm="apparmor_parser"
[ 11.720277] audit: type=1400 audit(1695737051.693:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=585 comm="apparmor_parser"
[ 12.259013] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.259024] Bluetooth: BNEP filters: protocol multicast.
[ 12.259034] Bluetooth: BNEP socket layer initialized.
[ 12.279086] Bluetooth: MGMT ver 1.22
[ 12.327167] NET: Registered PF_ALG protocol family.
[ 14.522818] fbcon: Taking over console.
[ 14.532796] Console: switching to colour frame buffer device 170x48.
[ 14.890403] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 14.890474] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 14.890478] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 14.890481] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 16.900441] Bluetooth: hci0: Opcode 0x c03 failed: -110
[ 17.431885] Bluetooth: RFCOMM TTY layer initialized.
[ 17.431905] Bluetooth: RFCOMM socket layer initialized.
[ 17.431915] Bluetooth: RFCOMM ver 1.11
[ 17.708103] wlo1: authenticate with bc:99:11:1d:30:7a
[ 18.356478] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 18.358039] wlo1: authenticated.
[ 18.360410] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 18.363895] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 18.364186] wlo1: associated.
[ 18.460693] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready.
[ 57.453841] wlo1: authenticate with bc:99:11:1d:30:7a
[ 58.101367] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 58.104790] wlo1: authenticated.
[ 58.113351] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 58.119440] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 58.119733] wlo1: associated.
[ 85.129604] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 85.129620] Bluetooth: HIDP socket layer initialized.
[ 85.377292] input: P47 (AVRCP) as /devices/virtual/input/input23
[ 85.406182] hid-generic 0005:05D6:000A.0005: unknown main item tag 0x0.
[ 85.406368] input: P47 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-4/1-4:1.0/bluetooth/hci1/hci1:1/0005:05D6:000A.0005/input/input24
[ 85.408359] hid-generic 0005:05D6:000A.0005: input,hidraw4: BLUETOOTH HID v2.40 Device [P47] on d8:c0:a6:e2:01:d6
[ 100.510964] usb 1-2.2: USB disconnect, device number 4
[ 113.223247] Bluetooth: hci1: unexpected event for opcode 0xfc19.
[ 113.247212] Bluetooth: hci1: unexpected event for opcode 0xfc19.
[ 592.485877] usb 1-2.2: new full-speed USB device number 10 using xhci_hcd.
[ 592.602469] usb 1-2.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=25.20
[ 592.602483] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 592.602487] usb 1-2.2: Product: CSR8510 A10.
[ 592.649010] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 592.649026] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 592.649031] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 597.703559] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 597.703646] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 597.703651] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 597.703654] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 599.717414] Bluetooth: hci0: Opcode 0x c03 failed: -110
[ 662.403442] wlo1: authenticate with bc:99:11:1d:30:7a
[ 663.050545] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 663.052111] wlo1: authenticated.
[ 663.053962] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 663.057438] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 663.057730] wlo1: associated.
[ 1125.283669] Bluetooth: hci0: CSR: Local version failed (-32)
[ 1125.283687] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 1125.283691] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 1125.283694] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 1155.652658] usb 1-2.2: USB disconnect, device number 10.
[ 1173.017908] usb 1-2.2: new full-speed USB device number 11 using xhci_hcd.
[ 1173.134922] usb 1-2.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=25.20
[ 1173.134934] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1173.134939] usb 1-2.2: Product: CSR8510 A10.
[ 1173.181171] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 1173.181186] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 1173.181191] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 1178.231186] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 1178.231280] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 1178.231285] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 1178.231289] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 1180.244430] Bluetooth: hci0: Opcode 0x c03 failed: -110
[ 1234.904785] Bluetooth: hci0: CSR: Local version failed (-32)
[ 1234.904801] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 1234.904804] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 1234.904807] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 1266.281552] wlo1: authenticate with bc:99:11:1d:30:7a
[ 1266.928315] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 1266.929889] wlo1: authenticated.
[ 1266.932000] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 1266.935605] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 1266.935878] wlo1: associated.
[ 1507.196027] usb 1-2.2: USB disconnect, device number 11.
[ 1526.597544] wlo1: deauthenticated from bc:99:11:1d:30:7a (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 1527.249081] wlo1: authenticate with bc:99:11:1d:30:7a
[ 1527.901378] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 1527.902954] wlo1: authenticated.
[ 1527.904781] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 1527.908766] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 1527.909053] wlo1: associated.
[ 1532.156755] usb 1-3.1: new full-speed USB device number 12 using xhci_hcd.
[ 1532.272835] usb 1-3.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=25.20
[ 1532.272847] usb 1-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1532.272850] usb 1-3.1: Product: CSR8510 A10.
[ 1532.336069] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 1532.336085] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 1532.336091] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 1532.336096] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 1532.336204] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 1532.336211] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 1532.336214] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 1532.389036] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 1532.389068] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 1778.372981] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 1778.372994] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 1778.372998] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 1778.373004] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 1778.373015] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 1778.373019] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 1778.373021] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 1778.385591] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 1778.421543] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 1778.421579] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 1870.207679] wlo1: authenticate with bc:99:11:1d:30:7a
[ 1870.854709] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 1870.858593] wlo1: authenticated.
[ 1870.862164] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 1870.867381] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 1870.867686] wlo1: associated.
[ 1874.072001] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 1874.072013] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 1874.072017] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 1874.072023] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 1874.072034] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 1874.072037] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 1874.072039] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 1874.085013] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 1874.122264] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 1874.122348] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 1925.706839] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 1925.706852] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 1925.706856] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 1925.706863] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 1925.706874] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 1925.706878] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 1925.706880] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 1925.720842] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 1925.757390] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 1925.757451] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 2074.962263] wlo1: deauthenticating from bc:99:11:1d:30:7a by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2083.602294] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 2083.602308] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 2083.602312] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 2083.602317] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 2083.602325] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 2083.602328] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 2083.602331] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 2083.616222] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 2083.653240] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 2083.653297] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 2086.557811] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 2086.557825] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 2086.557829] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 2086.557835] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 2086.557843] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 2086.557846] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 2086.557849] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 2086.572015] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 2086.608548] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 2086.608606] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 2115.410059] wlo1: authenticate with bc:99:11:1d:30:7a
[ 2116.059673] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 2116.061295] wlo1: authenticated.
[ 2116.067377] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 2116.075743] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 2116.076053] wlo1: associated.
[ 2116.151637] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready.
[ 2289.783591] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 2289.783603] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 2289.783607] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 2289.783614] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 2289.783624] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 2289.783628] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 2289.783631] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 2289.796536] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 2289.832500] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 2289.832557] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 2474.160738] wlo1: authenticate with bc:99:11:1d:30:7a
[ 2474.807712] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 2474.809255] wlo1: authenticated.
[ 2474.811117] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 2474.821192] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 2474.821492] wlo1: associated.
[ 3078.117879] wlo1: authenticate with bc:99:11:1d:30:7a
[ 3078.764558] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 3078.766106] wlo1: authenticated.
[ 3078.768364] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 3078.772010] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 3078.772276] wlo1: associated.
[ 3217.168918] wlo1: authenticate with bc:99:11:1d:30:7a
[ 3217.824105] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 3217.828279] wlo1: authenticated.
[ 3217.831855] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 3217.840627] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 3217.840913] wlo1: associated.
[ 3454.321697] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 3454.321709] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 3454.321713] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 3454.321719] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 3454.321727] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 3454.321730] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 3454.321733] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 3454.334485] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 3454.371738] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 3454.371792] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 3471.929520] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 3471.929533] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 3471.929537] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 3471.929543] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 3471.929555] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 3471.929558] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 3471.929561] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 3471.942453] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 3471.980820] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 3471.980908] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 3500.976238] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 3500.976251] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 3500.976255] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 3500.976262] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 3500.976272] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 3500.976276] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 3500.976279] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 3500.989357] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 3501.026072] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 3501.026116] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 3582.313475] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 3582.313488] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 3582.313492] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 3582.313499] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 3582.313511] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 3582.313514] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 3582.313517] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 3582.327382] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 3582.364349] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 3582.364405] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 3587.781698] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[ 3587.781712] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[ 3587.781716] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 3587.781722] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround.
[ 3587.781735] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 3587.781738] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 3587.781741] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 3587.795290] debugfs: File 'dut_mode' in directory 'hci0' already present!
[ 3587.832225] Bluetooth: hci0: unexpected cc 0x0c25 length: 2 < 3
[ 3587.832286] Bluetooth: hci0: Opcode 0x c25 failed: -38
[ 3677.723561] rtw_8821ce 0000:01:00.0: timed out to flush queue 1
[ 3682.246694] wlo1: authenticate with bc:99:11:1d:30:7a
[ 3682.893739] wlo1: send auth to bc:99:11:1d:30:7a (try 1/3)
[ 3682.895277] wlo1: authenticated.
[ 3682.901725] wlo1: associate with bc:99:11:1d:30:7a (try 1/3)
[ 3682.907467] wlo1: RX AssocResp from bc:99:11:1d:30:7a (capab=0x411 status=0 aid=4)
[ 3682.907760] wlo1: associated.
