Colorful B650M sistemde "WHEA_UNCORRECTABLE_ERROR" hatası

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
nt!_WHEA_ERROR_RECORD structure that describes the error condition. Try !errrec Address of the nt!_WHEA_ERROR_RECORD structure to get more details.
Arguments:
Arg1: 0000000000000001, Corrected Machine Check
Arg2: ffff998dbac98078, Address of the nt!_WHEA_ERROR_RECORD structure.
Arg3: 0000000098201000
Arg4: 000000000004080a

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 1062

    Key  : Analysis.Elapsed.mSec
    Value: 3297

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 812

    Key  : Analysis.Init.Elapsed.mSec
    Value: 32755

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 95

    Key  : Analysis.Version.DbgEng
    Value: 10.0.29482.1003

    Key  : Analysis.Version.Description
    Value: 10.2509.29.03 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2509.29.3

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x124

    Key  : Bugcheck.Code.TargetModel
    Value: 0x124

    Key  : Failure.Bucket
    Value: 0x124_1_AuthenticAMD_PROCESSOR__UNKNOWN_IMAGE_AuthenticAMD.sys

    Key  : Failure.Hash
    Value: {7cf2a33e-22ba-d47f-d16c-25ce0c4027d7}

    Key  : Hypervisor.Enlightenments.Value
    Value: 77057948

    Key  : Hypervisor.Enlightenments.ValueHex
    Value: 0x497cf9c

    Key  : Hypervisor.Flags.AnyHypervisorPresent
    Value: 1

    Key  : Hypervisor.Flags.ApicEnlightened
    Value: 1

    Key  : Hypervisor.Flags.ApicVirtualizationAvailable
    Value: 0

    Key  : Hypervisor.Flags.AsyncMemoryHint
    Value: 0

    Key  : Hypervisor.Flags.CoreSchedulerRequested
    Value: 0

    Key  : Hypervisor.Flags.CpuManager
    Value: 1

    Key  : Hypervisor.Flags.DeprecateAutoEoi
    Value: 0

    Key  : Hypervisor.Flags.DynamicCpuDisabled
    Value: 1

    Key  : Hypervisor.Flags.Epf
    Value: 0

    Key  : Hypervisor.Flags.ExtendedProcessorMasks
    Value: 1

    Key  : Hypervisor.Flags.HardwareMbecAvailable
    Value: 1

    Key  : Hypervisor.Flags.MaxBankNumber
    Value: 0

    Key  : Hypervisor.Flags.MemoryZeroingControl
    Value: 0

    Key  : Hypervisor.Flags.NoExtendedRangeFlush
    Value: 0

    Key  : Hypervisor.Flags.NoNonArchCoreSharing
    Value: 1

    Key  : Hypervisor.Flags.Phase0InitDone
    Value: 1

    Key  : Hypervisor.Flags.PowerSchedulerQos
    Value: 0

    Key  : Hypervisor.Flags.RootScheduler
    Value: 0

    Key  : Hypervisor.Flags.SynicAvailable
    Value: 1

    Key  : Hypervisor.Flags.UseQpcBias
    Value: 0

    Key  : Hypervisor.Flags.Value
    Value: 4853999

    Key  : Hypervisor.Flags.ValueHex
    Value: 0x4a10ef

    Key  : Hypervisor.Flags.VpAssistPage
    Value: 1

    Key  : Hypervisor.Flags.VsmAvailable
    Value: 1

    Key  : Hypervisor.RootFlags.AccessStats
    Value: 1

    Key  : Hypervisor.RootFlags.CrashdumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.CreateVirtualProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.DisableHyperthreading
    Value: 0

    Key  : Hypervisor.RootFlags.HostTimelineSync
    Value: 1

    Key  : Hypervisor.RootFlags.HypervisorDebuggingEnabled
    Value: 0

    Key  : Hypervisor.RootFlags.IsHyperV
    Value: 1

    Key  : Hypervisor.RootFlags.LivedumpEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.MapDeviceInterrupt
    Value: 1

    Key  : Hypervisor.RootFlags.MceEnlightened
    Value: 1

    Key  : Hypervisor.RootFlags.Nested
    Value: 0

    Key  : Hypervisor.RootFlags.StartLogicalProcessor
    Value: 1

    Key  : Hypervisor.RootFlags.Value
    Value: 1015

    Key  : Hypervisor.RootFlags.ValueHex
    Value: 0x3f7

    Key  : Stack.Pointer
    Value: NMI

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1

    Key  : WER.System.BIOSRevision
    Value: 5.35.0.0


BUGCHECK_CODE:  124

BUGCHECK_P1: 1

BUGCHECK_P2: ffff998dbac98078

BUGCHECK_P3: 98201000

BUGCHECK_P4: 4080a

FILE_IN_CAB:  122525-6593-01.dmp

FAULTING_THREAD:  ffff998dba4190c0

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1 (!blackboxwinlogon)


CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  vivaldi.exe

DPC_STACK_BASE:  FFFF8C0B388A7FB0

STACK_TEXT:
ffff8c0b`388a7808 fffff801`196b916a     : 00000000`00000124 00000000`00000001 ffff998d`bac98078 00000000`98201000 : nt!KeBugCheckEx
ffff8c0b`388a7810 fffff801`174815b0     : 00000000`00000000 ffff998d`bac98078 ffff998d`a68ff8e0 ffff998d`bac98078 : nt!HalBugCheckSystem+0xca
ffff8c0b`388a7850 fffff801`197bb44d     : 00000000`00000000 ffff8c0b`388a78e9 ffff998d`bac98078 ffff998d`a68ff8e0 : PSHED!PshedBugCheckSystem+0x10
ffff8c0b`388a7880 fffff801`196baa91     : ffff998d`a7194a80 ffff998d`a7194a80 ffff998d`a68ff930 ffff998d`a68ff8e0 : nt!WheaReportHwError+0x3dd
ffff8c0b`388a7950 fffff801`196a3b17     : 00000000`00000008 00000000`00000001 ffffb980`993c0100 00000000`00000008 : nt!HalpMcaReportError+0xb1
ffff8c0b`388a7ac0 fffff801`195a03f2     : 00000000`00000008 ffff8c0b`388a7cb0 ffff8c0b`388a7e70 00000000`00000368 : nt!HalpCmcPollProcessor+0x103707
ffff8c0b`388a7b50 fffff801`1958d3d6     : ffffb980`993c3240 000002fb`ece06d01 ffffb980`993c0180 00000000`00000000 : nt!HalpCmciPollProcessor+0x46
ffff8c0b`388a7b80 fffff801`19446f2e     : ffffb980`993c3240 ffff998d`a4ed8000 ffff8c0b`388a7e70 ffffb980`00000002 : nt!HalpCmciDeferredRoutine+0x16
ffff8c0b`388a7bb0 fffff801`19446214     : ffffb980`993c0180 00000001`00000000 00000000`00000002 00000000`00000004 : nt!KiExecuteAllDpcs+0x30e
ffff8c0b`388a7d20 fffff801`19605e25     : 00000000`00000000 ffffb980`993c0180 ffff998d`a49b3c40 00007ffc`fd3649c0 : nt!KiRetireDpcList+0x1f4
ffff8c0b`388a7fb0 fffff801`19605c10     : 00000000`00000035 fffff801`19605341 00000000`01000010 00000000`00000282 : nt!KxRetireDpcList+0x5
ffff8c0b`3966f440 fffff801`19605355     : 00007ffc`fd3649c0 fffff801`195ffa61 00001554`00c01b80 00000000`00000001 : nt!KiDispatchInterruptContinue
ffff8c0b`3966f470 fffff801`195ffa61     : 00001554`00c01b80 00000000`00000001 ffff8c0b`3966f498 ffffffff`fb91f780 : nt!KiDpcInterruptBypass+0x25
ffff8c0b`3966f480 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatchNoLock+0xb1


MODULE_NAME: AuthenticAMD

IMAGE_NAME:  AuthenticAMD.sys

STACK_COMMAND: .process /r /p 0xffff998db951a2c0; .thread 0xffff998dba4190c0 ; kb

FAILURE_BUCKET_ID:  0x124_1_AuthenticAMD_PROCESSOR__UNKNOWN_IMAGE_AuthenticAMD.sys

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {7cf2a33e-22ba-d47f-d16c-25ce0c4027d7}

Followup:     MachineOwner
---------

8: kd> !errrec ffff998dbac98078
===============================================================================
Common Platform Error Record @ ffff998dbac98078
-------------------------------------------------------------------------------
Record Id     : 01dc75b853a2adc0
Severity      : Fatal (1)
Length        : 936
Creator       : Microsoft
Notify Type   : Corrected Machine Check (CMCI)
Timestamp     : 12/25/2025 16:20:14 (UTC)
Flags         : 0x00000000

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ ffff998dbac980f8
Section       @ ffff998dbac981d0
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_PROCESSOR_GENERIC_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************
No valid data fields are present.

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ ffff998dbac98140
Section       @ ffff998dbac98290
Offset        : 536
Length        : 128
Flags         : 0x00000000
Severity      : Fatal

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_XPF_PROCESSOR_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_XPF_PROCESSOR_ERROR_SECTION                ***
***                                                                   ***
*************************************************************************
No valid data fields are present.

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ ffff998dbac98188
Section       @ ffff998dbac98310
Offset        : 664
Length        : 272
Flags         : 0x00000000
Severity      : Fatal

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_XPF_MCA_SECTION                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_XPF_MCA_SECTION                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_XPF_MCA_SECTION                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: hal!_WHEA_XPF_MCA_SECTION                     ***
***                                                                   ***
*************************************************************************
Error         : Unknown (Proc 0 Bank 0)
  Status      : 0x0000000000000000