Acer Aspire One ZG5 Mavi Ekran Sorunu

S

Sabri Sertan Tan

Hectopat
Katılım
24 Şubat 2013
Mesajlar
25
Merhaba;

Bende Acer AspireOne ZG5 model netbook var. Eskiden League of Legends tarzı oyunlar Vertex Shader hatası vermeden çalıştırıyordu. LOTRO oynamaya çalışırken bilgisayar mavi ekran vermeye başladı ve oyunlarda Vertex Shader hataları karşıma çıktı. LoL'de Stream izlerken aynı anda Skype'dan konuştuğumda bile mavi ekran hatası alıyorum. Bilgisayarım acaba virüs mü kapmıştır yoksa ekran kartında bir problem mi çıkmıştır? Şimdiden teşekkürler.

Bilgisayarın hardware özelliklerini yazmadım netbook olduğu için. İnternetten çıkıyor. Windows 7, Ubuntu, Windows XP yükledim. Daha önce Windows XP'de en az kasıyordu. Fabrika çıkışı Windows XP ondan dolayı Windows XP yükledim, şu anda Windows XP yüklü.
 
Son düzenleyen: Moderatör:
Tarihe göre sırala Puana göre sırala
Kod: 
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: portcls.sys


DRIVER_IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x100000d1 (0x43ae804c, 0x00000002, 0x00000000, 0xaa1ab7cc)


*** portcls.sys - Address 0xaa1ab7cc base at 0xaa1a4000 DateStamp 0x47e39d81

Kod: 
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


DRIVER_CORRUPTED_EXPOOL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x100000c5 (0x454c494a, 0x00000002, 0x00000001, 0x805515a1)


*** ntoskrnl.exe - Address 0x805515a1 base at 0x804d7000 DateStamp 0x50b7444b

Kod: 
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: Ntfs.sys


DRIVER_CORRUPTED_MMPOOL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x100000d0 (0x41300004, 0x00000002, 0x00000001, 0x8054e579)


*** Ntfs.sys - Address 0xf7539484 base at 0xf7514000 DateStamp 0x4922d8ed

Kod: 
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: RtkHDAud.sys


DRIVER_IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x100000d1 (0xfad97000, 0x00000002, 0x00000001, 0xaa2bab4d)


*** RtkHDAud.sys - Address 0xaa2bab4d base at 0xaa037000 DateStamp 0x4b30a3c9


Kod: 
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


PAGE_FAULT_IN_NONPAGED_AREA


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x10000050 (0xfffffffc, 0x00000000, 0x805eb343, 0x00000000)


*** ntoskrnl.exe - Address 0x805eb343 base at 0x804d7000 DateStamp 0x50b7444b

Kod: 
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


KERNEL_MODE_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x1000008e (0xc0000005, 0x805eb343, 0xa8e61c20, 0x00000000)


*** ntoskrnl.exe - Address 0x805eb343 base at 0x804d7000 DateStamp 0x50b7444b

Kod: 
A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x1000000a (0x3f7ffffc, 0x0000001c, 0x00000000, 0x804e1468)


*** ntoskrnl.exe - Address 0x804e1468 base at 0x804d7000 DateStamp 0x50b7444b

Hepsi farklı sürücülerden kaynaklanmış. Bana daha çok RAM arızası gibi geldi bu yüzden. İlk olarak bi RAM taraması yapın bu program ile:


https://www.technopat.net/forum/mas...usb-den-calisan-ram-bellek-test-programi.html
 
Artı 0 Eksi
Teşekkürler, Bugün RAM'i değiştirmeyi deneyeceğim. Sanırım bir yerlerde DDR2 1GB yedek RAM vardı :) Bir de Recep bey eskiden LoL açılıyordu şimdi vertex shader hatası veriyor acaba driver güncellemeden dolayı mı oldu ?
 
Son düzenleyen: Moderatör:
Artı 0 Eksi
Driver'ımı defalarca güncelledim. Explorer.exe'yi kapatıp girmiştim oyuna o zaman bozuldu ama nasıl olduğunu anlamadım. Sadece LoL'de değil çoğu oyunu eskiden kaldırırken artık vertex shader hatası vermeye başladı. Ekran kartımda bir problem çıktığını düşünüyorum.
 
Artı 0 Eksi
39509057.png

- - - Güncellendi - - -

Kod: 
PCI\VEN_8086&DEV_27A6&SUBSYS_015B1025&REV_03
PCI\VEN_8086&DEV_27A6&SUBSYS_015B1025
PCI\VEN_8086&DEV_27A6&CC_038000
PCI\VEN_8086&DEV_27A6&CC_0380
 
Artı 0 Eksi
Uyarı! Bu konu 13 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Benzer konular

Rorschach159
  • Soru
Acer Aspire 5742G Mavi ekran sorunu
Mesaj
2
Görüntüleme
3.127
Murat5038
Murat5038
Rapella
  • Soru
Acer Aspire 5737Z Mavi Ekran sorunu
Mesaj
9
Görüntüleme
1.366
Recep Baltaş
Recep Baltaş
legatusVI
  • Soru
Acer Aspire V5-123 Mavi Ekran Sorunu
Mesaj
2
Görüntüleme
977
legatusVI
legatusVI
M
  • Soru
Acer Aspire v3 571G mavi ekran sorunu
Mesaj
0
Görüntüleme
851
mcutkan
M
FurkanGmK
  • Soru
Acer Aspire V3 772G "Whea_Uncorrectable_Error" mavi ekran sorunu
Mesaj
5
Görüntüleme
1.210
FurkanGmK
FurkanGmK

Technopat Haberler

Yeni konular

Yeni mesajlar

Geri
Yukarı