Elementary OS kurarken "buffer I/O error" hatası

börek

Hectopat
Katılım
4 Şubat 2021
Mesajlar
8
Daha fazla  
Cinsiyet
Erkek
Elementary OS kurmaya çalışırken, SSD'e kurduktan sonra yeniden başlata tıklayınca.

Kod:
Buffer I/O error on dev sdc2 logical block 880, async page read.

Bu hatayı alıyorum. dev/sdc Elementary OS'ın kurulduğu USB bellek yeniden başlatmayı engelliyor. Sorunun çözümü nedir? Yardımcı olursanız sevinirim.
 

Dosya Ekleri

  • 17117891829057776658922683072392.jpg
    17117891829057776658922683072392.jpg
    191,4 KB · Görüntüleme: 19
Diskte bozukluk var gibi görünüyor.
 
Diskte bozukluk var gibi görünüyor.

Hocam bu 40dk filan bekleyince bilgisayar kendine reset atıyor ama "ata3 softreset failed" diye hata alıyorum ve ekran bunun ardından ekranın alt kısmı fotoğrafta belirttiğim gibi oluyor daha önceden bu SSD'e Windows'da kurduğumda garip bir hata almıştım ama kullanmama engel değildi
 

Dosya Ekleri

  • 17117900393131026188373036060046.jpg
    17117900393131026188373036060046.jpg
    204,3 KB · Görüntüleme: 11
Son düzenleme:
Hocam bu 40dk filan bekleyince bilgisayar kendine reset atıyor ama "ata3 softreset failed" diye hata alıyorum ve ekran bunun ardından ekranın alt kısmı fotoğrafta belirttiğim gibi oluyor daha önceden bu SSD'e Windows'da kurduğumda garip bir hata almıştım ama kullanmama engel değildi
Disk sağlığına bakabilir misin. Ssdnin nand modüllerinden biri ölmüş galiba. Tabi basit bir mantıksal bölüm bozukluğu lvm bozukluğu falan da olabilir. Tekrar bir format atmayı dene bakalım yine aynı hatayı verecek mi ? USB’den Ubuntu önyükleyebilir misin ? Diskler uygulamasında Smart değerlerini ölçen sekme var. Ordan anlayabiliriz. Bozuk değilse tekrar formatlarsın ona göre.
 
Disk sağlığına bakabilir misin? SSD'nin NAND modüllerinden biri ölmüş galiba. Tabii basit bir mantıksal bölüm bozukluğu lvm bozukluğu falan da olabilir. Tekrar bir format atmayı dene bakalım yine aynı hatayı verecek mi? USB'den Ubuntu önyükleyebilir misin? Diskler uygulamasında Smart değerlerini ölçen sekme var. Oradan anlayabiliriz. Bozuk değilse tekrar formatlarsın ona göre.

Hocam disk gayet iyi diyor ama ben yine terminalden bütün disklere USB dahil badblocks komudunu uygulamayı düşünüyorum işe yarar mı ona göre uzun bir işlem başlatıcam

Disk sağlığına bakabilir misin. Ssdnin nand modüllerinden biri ölmüş galiba. Tabi basit bir mantıksal bölüm bozukluğu lvm bozukluğu falan da olabilir. Tekrar bir format atmayı dene bakalım yine aynı hatayı verecek mi ? USB’den Ubuntu önyükleyebilir misin ? Diskler uygulamasında Smart değerlerini ölçen sekme var. Ordan anlayabiliriz. Bozuk değilse tekrar formatlarsın ona göre.
şimdi tekrar terminalden yaptım smart kontrolde hem usb sorunsuz geçti hem de ssd ama hard diskte hata aldım acaba sebebi hard disk mi diye düşünüyorum şöyle bir sorun var harddisk /dev/sda olarak geçiyor

Kod:
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar
Device Model:     WDC WD800BB-00JKA0
Serial Number:    WD-WMAMD2007725
Firmware Version: 05.01C05
User Capacity:    80.026.361.856 bytes [80,0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-6 (minor revision not indicated)
Local Time is:    Sun Mar 31 10:04:07 2024 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         ( 2460) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    No General Purpose Logging support.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  35) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x003f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       2
  3 Spin_Up_Time            0x0003   163   161   021    Pre-fail  Always       -       2825
  4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4944
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   080   080   000    Old_age   Always       -       15170
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4432
194 Temperature_Celsius     0x0022   112   092   000    Old_age   Always       -       31
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   174   000    Old_age   Always       -       24551
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 1
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 14713 hours (613 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 07 29 47 1b e1  Error: UNC 7 sectors at LBA = 0x011b4729 = 18564905

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 28 47 1b 01 58      00:01:42.710  READ DMA
  c8 00 10 16 31 6c 00 58      00:01:42.705  READ DMA
  c8 00 08 80 83 4e 00 58      00:01:42.690  READ DMA
  c8 00 40 48 94 5f 01 58      00:01:42.680  READ DMA
  c8 00 80 50 6f 1d 01 58      00:01:42.665  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
böyle bir hata alıyorum

sudo dmesg yapınca da
Kod:
[    0.000000] Linux version 6.2.0-33-generic (buildd@lcy02-amd64-073) (x86_64-linux-gnu-gcc-11 (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #33~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Sep  7 10:33:52 UTC 2 (Ubuntu 6.2.0-33.33~22.04.1-generic 6.2.16)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz boot=casper maybe-ubiquity quiet splash nomodeset initrd=/casper/initrd.lz
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000018fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer System Product Name/M2A-VM, BIOS ASUS M2A-VM ACPI BIOS Revision 2302 02/05/2009
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2700.050 MHz processor
[    0.002917] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002923] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.011770] AGP: No AGP bridge found
[    0.011854] last_pfn = 0x190000 max_arch_pfn = 0x400000000
[    0.011874] total RAM covered: 3327M
[    0.012147] Found optimal setting for mtrr clean up
[    0.012149]  gran_size: 64K     chunk_size: 2M     num_reg: 4      lose cover RAM: 0G
[    0.012156] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.012430] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.012447] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[    0.015620] found SMP MP-table at [mem 0x000f64c0-0x000f64cf]
[    0.016194] RAMDISK: [mem 0x7861b000-0x7fffffff]
[    0.016207] ACPI: Early table checksum verification disabled
[    0.016214] ACPI: RSDP 0x00000000000F8170 000024 (v02 ATI   )
[    0.016221] ACPI: XSDT 0x00000000CFEE3100 00004C (v01 ATI    ASUSACPI 42302E31 AWRD 00000000)
[    0.016231] ACPI: FACP 0x00000000CFEE8440 0000F4 (v03 ATI    ASUSACPI 42302E31 AWRD 00000000)
[    0.016240] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20221020/tbfadt-564)
[    0.016245] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20221020/tbfadt-564)
[    0.016249] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20221020/tbfadt-564)
[    0.016253] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20221020/tbfadt-564)
[    0.016258] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20221020/tbfadt-669)
[    0.016262] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20221020/tbfadt-669)
[    0.016266] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20221020/tbfadt-669)
[    0.016272] ACPI: DSDT 0x00000000CFEE3280 00515A (v01 ATI    ASUSACPI 00001000 MSFT 03000000)
[    0.016278] ACPI: FACS 0x00000000CFEE0000 000040
[    0.016283] ACPI: FACS 0x00000000CFEE0000 000040
[    0.016288] ACPI: SSDT 0x00000000CFEE8680 0002CC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.016294] ACPI: HPET 0x00000000CFEE89C0 000038 (v01 ATI    ASUSACPI 42302E31 AWRD 00000098)
[    0.016300] ACPI: MCFG 0x00000000CFEE8A40 00003C (v01 ATI    ASUSACPI 42302E31 AWRD 00000000)
[    0.016305] ACPI: APIC 0x00000000CFEE8580 000084 (v01 ATI    ASUSACPI 42302E31 AWRD 00000000)
[    0.016310] ACPI: Reserving FACP table memory at [mem 0xcfee8440-0xcfee8533]
[    0.016313] ACPI: Reserving DSDT table memory at [mem 0xcfee3280-0xcfee83d9]
[    0.016314] ACPI: Reserving FACS table memory at [mem 0xcfee0000-0xcfee003f]
[    0.016316] ACPI: Reserving FACS table memory at [mem 0xcfee0000-0xcfee003f]
[    0.016318] ACPI: Reserving SSDT table memory at [mem 0xcfee8680-0xcfee894b]
[    0.016320] ACPI: Reserving HPET table memory at [mem 0xcfee89c0-0xcfee89f7]
[    0.016322] ACPI: Reserving MCFG table memory at [mem 0xcfee8a40-0xcfee8a7b]
[    0.016323] ACPI: Reserving APIC table memory at [mem 0xcfee8580-0xcfee8603]
[    0.016525] Scanning NUMA topology in Northbridge 24
[    0.016594] No NUMA configuration found
[    0.016596] Faking a node at [mem 0x0000000000000000-0x000000018fffffff]
[    0.016611] NODE_DATA(0) allocated [mem 0x18ffd1000-0x18fffbfff]
[    0.017076] Zone ranges:
[    0.017077]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.017081]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.017083]   Normal   [mem 0x0000000100000000-0x000000018fffffff]
[    0.017086]   Device   empty
[    0.017088] Movable zone start for each node
[    0.017091] Early memory node ranges
[    0.017092]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.017095]   node   0: [mem 0x0000000000100000-0x00000000cfedffff]
[    0.017097]   node   0: [mem 0x0000000100000000-0x000000018fffffff]
[    0.017101] Initmem setup node 0 [mem 0x0000000000001000-0x000000018fffffff]
[    0.017113] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.017249] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.094109] On node 0, zone Normal: 288 pages in unavailable ranges
[    0.094239] Detected use of extended apic ids on hypertransport bus
[    0.094257] ACPI: PM-Timer IO Port: 0x4008
[    0.094272] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.094275] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.094276] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.094278] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.094295] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.094299] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.094303] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.094309] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.094311] ACPI: HPET id: 0x8200 base: 0xfed00000
[    0.094317] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.094337] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.094340] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.094342] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.094344] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.094346] PM: hibernation: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
[    0.094348] PM: hibernation: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[    0.094349] PM: hibernation: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[    0.094351] PM: hibernation: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.094352] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.094354] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.094356] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.094359] [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.094361] Booting paravirtualized kernel on bare hardware
[    0.094365] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.094378] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.097008] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u524288
[    0.097018] pcpu-alloc: s217088 r8192 d28672 u524288 alloc=1*2097152
[    0.097024] pcpu-alloc: [0] 0 1 2 3
[    0.097076] Fallback order for Node 0: 0
[    0.097082] Built 1 zonelists, mobility grouping on.  Total pages: 1418724
[    0.097084] Policy zone: Normal
[    0.097087] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper maybe-ubiquity quiet splash nomodeset initrd=/casper/initrd.lz
[    0.097247] Booted with the nomodeset parameter. Only the system framebuffer will be available
[    0.097273] Unknown kernel command line parameters "maybe-ubiquity splash BOOT_IMAGE=/casper/vmlinuz boot=casper", will be passed to user space.
[    0.103925] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.107308] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.107411] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.107415] AGP: Checking aperture...
[    0.116249] AGP: No AGP bridge found
[    0.116252] AGP: Node 0: aperture [bus addr 0x2d60000000-0x2d61ffffff] (32MB)
[    0.116255] Aperture beyond 4GB. Ignoring.
[    0.116256] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.116257] AGP: Please enable the IOMMU option in the BIOS setup
[    0.116259] AGP: This costs you 64MB of RAM
[    0.116262] AGP: Mapping aperture over RAM [mem 0xc8000000-0xcbffffff] (65536KB)
[    0.116267] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xcbffffff]
[    0.116357] software IO TLB: area num 4.
[    0.306790] Memory: 5342904K/5765624K available (20480K kernel code, 4151K rwdata, 12712K rodata, 4764K init, 17540K bss, 422460K reserved, 0K cma-reserved)
[    0.307364] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.307454] ftrace: allocating 53405 entries in 209 pages
[    0.321293] ftrace: allocated 209 pages with 4 groups
[    0.322611] Dynamic Preempt: voluntary
[    0.322714] rcu: Preemptible hierarchical RCU implementation.
[    0.322716] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.322719]     Trampoline variant of Tasks RCU enabled.
[    0.322720]     Rude variant of Tasks RCU enabled.
[    0.322721]     Tracing variant of Tasks RCU enabled.
[    0.322723] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.322725] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.328915] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.329186] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.333383] Console: colour VGA+ 80x25
[    0.333388] printk: console [tty0] enabled
[    0.333495] ACPI: Core revision 20221020
[    0.333658] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.333692] APIC: Switch to symmetric I/O mode setup
[    0.334273] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.353688] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.353701] Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.10 BogoMIPS (lpj=10800200)
[    0.353745] LVT offset 0 assigned for vector 0xf9
[    0.353750] process: using AMD E400 aware idle routine
[    0.353753] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.353755] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.353762] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.353766] Spectre V2 : Mitigation: Retpolines
[    0.353768] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.353770] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.353777] x86/fpu: x87 FPU will use FXSAVE
[    0.379469] Freeing SMP alternatives memory: 44K
[    0.379488] pid_max: default: 32768 minimum: 301
[    0.379650] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor
[    0.379678] landlock: Up and running.
[    0.379680] Yama: becoming mindful.
[    0.379794] AppArmor: AppArmor initialized
[    0.379985] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.380082] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.492116] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (family: 0xf, model: 0x6b, stepping: 0x2)
[    0.492457] cblist_init_generic: Setting adjustable number of callback queues.
[    0.492462] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.492530] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.492571] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.492609] Performance Events: AMD PMU driver.
[    0.492617] ... version:                0
[    0.492619] ... bit width:              48
[    0.492621] ... generic registers:      4
[    0.492623] ... value mask:             0000ffffffffffff
[    0.492625] ... max period:             00007fffffffffff
[    0.492627] ... fixed-purpose events:   0
[    0.492628] ... event mask:             000000000000000f
[    0.492857] signal: max sigframe size: 1440
[    0.492916] rcu: Hierarchical SRCU implementation.
[    0.492918] rcu:     Max phase no-delay instances is 1000.
[    0.493691] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.493691] smp: Bringing up secondary CPUs ...
[    0.493691] x86: Booting SMP configuration:
[    0.493691] .... node  #0, CPUs:      #1
[    0.008474] __common_interrupt: 1.55 No irq handler for vector
[    0.569835] smp: Brought up 1 node, 2 CPUs
[    0.569835] smpboot: Max logical packages: 2
[    0.569835] smpboot: Total of 2 processors activated (10800.22 BogoMIPS)
[    0.571079] devtmpfs: initialized
[    0.571079] x86/mm: Memory block size: 128MB
[    0.571148] ACPI: PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.571264] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.571329] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.571457] pinctrl core: initialized pinctrl subsystem
[    0.571729] PM: RTC time: 06:54:33, date: 2024-03-31
[    0.577382] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.578481] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.579310] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.580163] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.580217] audit: initializing netlink subsys (disabled)
[    0.580461] audit: type=2000 audit(1711868073.244:1): state=initialized audit_enabled=0 res=1
[    0.580744] thermal_sys: Registered thermal governor 'fair_share'
[    0.580749] thermal_sys: Registered thermal governor 'bang_bang'
[    0.580751] thermal_sys: Registered thermal governor 'step_wise'
[    0.580753] thermal_sys: Registered thermal governor 'user_space'
[    0.580754] thermal_sys: Registered thermal governor 'power_allocator'
[    0.580765] EISA bus registered
[    0.580791] cpuidle: using governor ladder
[    0.580798] cpuidle: using governor menu
[    0.580810] node 0 link 0: io port [c000, ffff]
[    0.580814] TOM: 00000000d0000000 aka 3328M
[    0.580818] node 0 link 0: mmio [a0000, bffff]
[    0.580823] node 0 link 0: mmio [d0000000, dfffffff]
[    0.580827] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.580838] node 0 link 0: mmio [e0000000, e03fffff]
[    0.580841] TOM2: 0000000190000000 aka 6400M
[    0.580844] bus: [bus 00-03] on node 0 link 0
[    0.580848] bus: 00 [io  0x0000-0xffff]
[    0.580850] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.580853] bus: 00 [mem 0xd0000000-0xefffffff]
[    0.580855] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.580857] bus: 00 [mem 0x190000000-0xfcffffffff]
[    0.580985] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.581185] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.581193] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry
[    0.581223] PCI: Using configuration type 1 for base access
[    0.581548] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.599264] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.599274] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.600332] ACPI: Added _OSI(Module Device)
[    0.600341] ACPI: Added _OSI(Processor Device)
[    0.600343] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.600345] ACPI: Added _OSI(Processor Aggregator Device)
[    0.606722] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.606966] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
[    0.607030] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20221020/dspkginit-438)
[    0.607087] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20221020/dspkginit-438)
[    0.607144] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20221020/dspkginit-438)
[    0.607212] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20221020/dspkginit-438)
[    0.607269] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20221020/dspkginit-438)
[    0.607326] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20221020/dspkginit-438)
[    0.607383] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
[    0.607450] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20221020/dspkginit-438)
[    0.607507] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20221020/dspkginit-438)
[    0.607564] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
[    0.607621] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20221020/dspkginit-438)
[    0.607697] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20221020/dspkginit-438)
[    0.607771] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
[    0.607845] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20221020/dspkginit-438)
[    0.607919] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20221020/dspkginit-438)
[    0.608003] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
[    0.608078] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20221020/dspkginit-438)
[    0.608152] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20221020/dspkginit-438)
[    0.608226] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20221020/dspkginit-438)
[    0.608310] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20221020/dspkginit-438)
[    0.608385] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20221020/dspkginit-438)
[    0.608458] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20221020/dspkginit-438)
[    0.608532] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
[    0.608617] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20221020/dspkginit-438)
[    0.608691] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20221020/dspkginit-438)
[    0.608765] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
[    0.608839] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20221020/dspkginit-438)
[    0.609204] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.CPU0 (20221020/dspkginit-438)
[    0.616335] ACPI: Interpreter enabled
[    0.616335] ACPI: PM: (supports S0 S1 S3 S4 S5)
[    0.616335] ACPI: Using IOAPIC for interrupt routing
[    0.616335] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.616335] PCI: Using E820 reservations for host bridge windows
[    0.616335] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.626468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.626490] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.627135] PCI host bridge to bus 0000:00
[    0.627140] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.627143] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.627147] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.627150] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[    0.627154] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.627179] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[    0.627286] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
[    0.627304] pci 0000:00:02.0: enabling Extended Tags
[    0.627334] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.627489] pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
[    0.627506] pci 0000:00:07.0: enabling Extended Tags
[    0.627530] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.627674] pci 0000:00:12.0: [1002:4380] type 00 class 0x010601
[    0.627694] pci 0000:00:12.0: reg 0x10: [io  0xff00-0xff07]
[    0.627705] pci 0000:00:12.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.627716] pci 0000:00:12.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.627727] pci 0000:00:12.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.627738] pci 0000:00:12.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.627750] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[    0.627928] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[    0.627947] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[    0.628126] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[    0.628145] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.628339] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[    0.628358] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[    0.628535] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[    0.628554] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[    0.628753] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[    0.628772] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.628963] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[    0.628982] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[    0.629070] pci 0000:00:13.5: supports D1 D2
[    0.629072] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    0.629222] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.629240] pci 0000:00:14.0: reg 0x10: [io  0x0b00-0x0b0f]
[    0.629421] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[    0.629439] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.629450] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.629461] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.629472] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.629483] pci 0000:00:14.1: reg 0x20: [io  0xf900-0xf90f]
[    0.629505] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.629508] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.629511] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.629514] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.629642] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.629666] pci 0000:00:14.2: reg 0x10: [mem 0xfe020000-0xfe023fff 64bit]
[    0.629755] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.629878] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[    0.630098] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.630266] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.630362] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.630427] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.630490] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.630625] pci 0000:01:00.0: [10de:0640] type 00 class 0x030000
[    0.630639] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.630650] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.630662] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.630670] pci 0000:01:00.0: reg 0x24: [io  0xdf00-0xdf7f]
[    0.630678] pci 0000:01:00.0: reg 0x30: [mem 0xfbf80000-0xfbffffff pref]
[    0.630685] pci 0000:01:00.0: enabling Extended Tags
[    0.630705] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.641721] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.641727] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.641731] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.641735] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.641798] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.641818] pci 0000:02:00.0: reg 0x10: [io  0xee00-0xeeff]
[    0.641842] pci 0000:02:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit]
[    0.641871] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.641880] pci 0000:02:00.0: enabling Extended Tags
[    0.641964] pci 0000:02:00.0: supports D1 D2
[    0.641966] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.642110] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.642120] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.642125] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.642128] pci 0000:00:07.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.642132] pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.642147] pci_bus 0000:03: extended config space not accessible
[    0.642215] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.642221] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.642226] pci 0000:00:14.4:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.642231] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff pref]
[    0.642234] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.642237] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.642240] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    0.642243] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[    0.642503] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.642507] ACPI: PCI: Interrupt link LNKA disabled
[    0.642602] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.642604] ACPI: PCI: Interrupt link LNKB disabled
[    0.642698] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.642701] ACPI: PCI: Interrupt link LNKC disabled
[    0.642794] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.642797] ACPI: PCI: Interrupt link LNKD disabled
[    0.642888] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.642891] ACPI: PCI: Interrupt link LNKE disabled
[    0.642982] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.642985] ACPI: PCI: Interrupt link LNKF disabled
[    0.643077] ACPI: PCI: Interrupt link LNK0 configured for IRQ 11
[    0.643171] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
[    0.643174] ACPI: PCI: Interrupt link LNK1 disabled
[    0.644794] iommu: Default domain type: Translated
[    0.644803] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.645197] SCSI subsystem initialized
[    0.645286] libata version 3.00 loaded.
[    0.645336] ACPI: bus type USB registered
[    0.645355] usbcore: registered new interface driver usbfs
[    0.645364] usbcore: registered new interface driver hub
[    0.645375] usbcore: registered new device driver usb
[    0.645427] pps_core: LinuxPPS API ver. 1 registered
[    0.645429] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.645435] PTP clock support registered
[    0.645535] EDAC MC: Ver: 3.0.0
[    0.646141] NetLabel: Initializing
[    0.646148] NetLabel:  domain hash size = 128
[    0.646150] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.646185] NetLabel:  unlabeled traffic allowed by default
[    0.646221] mctp: management component transport protocol core
[    0.646221] NET: Registered PF_MCTP protocol family
[    0.646221] PCI: Using ACPI for IRQ routing
[    0.655480] PCI: pci_cache_line_size set to 64 bytes
[    0.655546] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.655550] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.655581] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.655581] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.655581] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.655581] vgaarb: loaded
[    0.655581] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.655581] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.657791] clocksource: Switched to clocksource hpet
[    0.696231] VFS: Disk quotas dquot_6.6.0
[    0.696274] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.696689] AppArmor: AppArmor Filesystem Enabled
[    0.696739] pnp: PnP ACPI init
[    0.697100] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.697175] system 00:00: [io  0x4100-0x411f] has been reserved
[    0.697180] system 00:00: [io  0x0228-0x022f] has been reserved
[    0.697183] system 00:00: [io  0x040b] has been reserved
[    0.697186] system 00:00: [io  0x04d6] has been reserved
[    0.697189] system 00:00: [io  0x0c00-0x0c01] has been reserved
[    0.697192] system 00:00: [io  0x0c14] has been reserved
[    0.697195] system 00:00: [io  0x0c50-0x0c52] has been reserved
[    0.697198] system 00:00: [io  0x0c6c-0x0c6d] has been reserved
[    0.697201] system 00:00: [io  0x0c6f] has been reserved
[    0.697204] system 00:00: [io  0x0cd0-0x0cd1] has been reserved
[    0.697207] system 00:00: [io  0x0cd2-0x0cd3] has been reserved
[    0.697210] system 00:00: [io  0x0cd4-0x0cdf] has been reserved
[    0.697213] system 00:00: [io  0x4000-0x40fe] has been reserved
[    0.697216] system 00:00: [io  0x4210-0x4217] has been reserved
[    0.697219] system 00:00: [io  0x0b10-0x0b1f] has been reserved
[    0.697223] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.697622] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.697627] system 00:02: [io  0x0220-0x0225] has been reserved
[    0.697892] pnp 00:03: [dma 2]
[    0.699172] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.699511] pnp 00:08: disabling [mem 0x000cde00-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.699552] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.699556] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.699560] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.699563] system 00:08: [mem 0xcfef0000-0xcffeffff] could not be reserved
[    0.699567] system 00:08: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.699570] system 00:08: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.699574] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[    0.699577] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.699581] system 00:08: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.699584] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.699588] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.699592] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.699607] pnp: PnP ACPI: found 9 devices
[    0.708308] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.708514] NET: Registered PF_INET protocol family
[    0.709366] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.712889] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.713083] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.713462] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.715340] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.717034] TCP: Hash tables configured (established 65536 bind 65536)
[    0.717555] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.717717] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.717859] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.718025] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.718045] NET: Registered PF_XDP protocol family
[    0.718084] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.718093] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.718098] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.718102] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.718112] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[    0.718117] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.718120] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.718123] pci 0000:00:07.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.718126] pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.718132] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.718136] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.718142] pci 0000:00:14.4:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.718146] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff pref]
[    0.718157] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.718160] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.718163] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.718166] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window]
[    0.718169] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.718171] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.718174] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.718177] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.718180] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.718182] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.718186] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.718188] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.718191] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
[    0.718194] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.718197] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.718199] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.718202] pci_bus 0000:03: resource 7 [mem 0xd0000000-0xfebfffff window]
[    0.718319] pci 0000:00:13.0: avoiding MSI to work around a hardware defect
[    0.796647] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x190 took 76482 usecs
[    0.796663] pci 0000:00:13.1: avoiding MSI to work around a hardware defect
[    0.864610] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x190 took 66344 usecs
[    0.864620] pci 0000:00:13.2: avoiding MSI to work around a hardware defect
[    0.920610] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x190 took 54666 usecs
[    0.920619] pci 0000:00:13.3: avoiding MSI to work around a hardware defect
[    0.948607] pci 0000:00:13.3: quirk_usb_early_handoff+0x0/0x190 took 27323 usecs
[    0.948617] pci 0000:00:13.4: avoiding MSI to work around a hardware defect
[    0.968611] pci 0000:00:13.4: quirk_usb_early_handoff+0x0/0x190 took 19517 usecs
[    0.968621] pci 0000:00:13.5: avoiding MSI to work around a hardware defect
[    0.968917] PCI: CLS 32 bytes, default 64
[    0.969087] Trying to unpack rootfs image as initramfs...
[    0.969616] PCI-DMA: Disabling AGP.
[    0.969798] PCI-DMA: aperture base @ c8000000 size 65536 KB
[    0.969802] PCI-DMA: using GART IOMMU.
[    0.969807] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.969924] software IO TLB: tearing down default memory pool
[    0.976170] Initialise system trusted keyrings
[    0.976212] Key type blacklist registered
[    0.976386] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.976414] zbud: loaded
[    0.976957] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.977201] fuse: init (API version 7.38)
[    0.977568] integrity: Platform Keyring initialized
[    0.977576] integrity: Machine keyring initialized
[    0.989044] Key type asymmetric registered
[    0.989047] Asymmetric key parser 'x509' registered
[    0.989106] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.989251] io scheduler mq-deadline registered
[    0.990494] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.990595] Driver imsttfb not loading because of nomodeset parameter
[    0.990598] Driver asiliantfb not loading because of nomodeset parameter
[    0.990781] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.990829] ACPI: button: Power Button [PWRB]
[    0.990905] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.991336] ACPI: button: Power Button [PWRF]
[    0.992309] ACPI: \_TZ_.THRM: Invalid passive threshold
[    0.992824] thermal LNXTHERM:00: registered as thermal_zone0
[    0.992828] ACPI: thermal: Thermal Zone [THRM] (40 C)
[    0.993428] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.014101] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.018304] Linux agpgart interface v0.103
[    1.022878] loop: module loaded
[    1.024413] tun: Universal TUN/TAP device driver, 1.6
[    1.024540] PPP generic driver version 2.4.2
[    1.025348] ehci-pci 0000:00:13.5: EHCI Host Controller
[    1.025373] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[    1.025385] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    1.025400] ehci-pci 0000:00:13.5: debug port 1
[    1.025505] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[    1.040559] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    1.040765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[    1.040770] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040773] usb usb1: Product: EHCI Host Controller
[    1.040775] usb usb1: Manufacturer: Linux 6.2.0-33-generic ehci_hcd
[    1.040778] usb usb1: SerialNumber: 0000:00:13.5
[    1.041029] hub 1-0:1.0: USB hub found
[    1.041044] hub 1-0:1.0: 10 ports detected
[    1.041558] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.041570] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.041690] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[    1.104563] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02
[    1.104568] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.104571] usb usb2: Product: OHCI PCI host controller
[    1.104573] usb usb2: Manufacturer: Linux 6.2.0-33-generic ohci_hcd
[    1.104575] usb usb2: SerialNumber: 0000:00:13.0
[    1.104804] hub 2-0:1.0: USB hub found
[    1.104819] hub 2-0:1.0: 2 ports detected
[    1.105474] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.105491] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.105572] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[    1.168591] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02
[    1.168595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.168598] usb usb3: Product: OHCI PCI host controller
[    1.168601] usb usb3: Manufacturer: Linux 6.2.0-33-generic ohci_hcd
[    1.168603] usb usb3: SerialNumber: 0000:00:13.1
[    1.168842] hub 3-0:1.0: USB hub found
[    1.168858] hub 3-0:1.0: 2 ports detected
[    1.169364] ohci-pci 0000:00:13.2: OHCI PCI host controller
[    1.169378] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.169516] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[    1.236573] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02
[    1.236580] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.236582] usb usb4: Product: OHCI PCI host controller
[    1.236585] usb usb4: Manufacturer: Linux 6.2.0-33-generic ohci_hcd
[    1.236588] usb usb4: SerialNumber: 0000:00:13.2
[    1.236855] hub 4-0:1.0: USB hub found
[    1.236872] hub 4-0:1.0: 2 ports detected
[    1.237457] ohci-pci 0000:00:13.3: OHCI PCI host controller
[    1.237470] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[    1.237530] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[    1.300587] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02
[    1.300592] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.300594] usb usb5: Product: OHCI PCI host controller
[    1.300596] usb usb5: Manufacturer: Linux 6.2.0-33-generic ohci_hcd
[    1.300599] usb usb5: SerialNumber: 0000:00:13.3
[    1.300846] hub 5-0:1.0: USB hub found
[    1.300862] hub 5-0:1.0: 2 ports detected
[    1.301321] ohci-pci 0000:00:13.4: OHCI PCI host controller
[    1.301334] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[    1.301385] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[    1.364562] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02
[    1.364567] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.364569] usb usb6: Product: OHCI PCI host controller
[    1.364572] usb usb6: Manufacturer: Linux 6.2.0-33-generic ohci_hcd
[    1.364574] usb usb6: SerialNumber: 0000:00:13.4
[    1.364815] hub 6-0:1.0: USB hub found
[    1.364830] hub 6-0:1.0: 2 ports detected
[    1.365303] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.365310] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.365517] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.365663] mousedev: PS/2 mouse device common for all mice
[    1.365870] rtc_cmos 00:01: RTC can wake from S4
[    1.366183] rtc_cmos 00:01: registered as rtc0
[    1.366224] rtc_cmos 00:01: setting system clock to 2024-03-31T06:54:34 UTC (1711868074)
[    1.366283] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.366300] i2c_dev: i2c /dev entries driver
[    1.366341] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    1.366394] device-mapper: uevent: version 1.0.3
[    1.366482] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
[    1.366534] platform eisa.0: Probing EISA bus 0
[    1.366540] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.366543] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.366546] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.366548] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.366551] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.366553] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.366556] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.366558] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.366561] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.366563] platform eisa.0: EISA: Detected 0 cards
[    1.366748] ledtrig-cpu: registered to indicate activity on CPUs
[    1.367007] drop_monitor: Initializing network drop monitor service
[    1.406131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.406368] NET: Registered PF_INET6 protocol family
[    1.560507] usb 2-2: new low-speed USB device number 2 using ohci-pci
[    1.790930] usb 2-2: New USB device found, idVendor=3938, idProduct=1080, bcdDevice= 3.11
[    1.790935] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.790938] usb 2-2: Product: 2.4G Wireless Device
[    1.790941] usb 2-2: Manufacturer: YK
[    2.064548] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    2.280048] usb 1-5: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    2.280063] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.280066] usb 1-5: Product: Mass Storage
[    2.280069] usb 1-5: Manufacturer: Generic
[    2.280071] usb 1-5: SerialNumber: 54ZF8H99J6FUFTAD
[    3.376544] Freeing initrd memory: 124820K
[    3.394013] Segment Routing with IPv6
[    3.394057] In-situ OAM (IOAM) with IPv6
[    3.394111] NET: Registered PF_PACKET protocol family
[    3.394305] Key type dns_resolver registered
[    3.394755] IPI shorthand broadcast: enabled
[    3.397974] registered taskstats version 1
[    3.398252] Loading compiled-in X.509 certificates
[    3.399537] Loaded X.509 cert 'Build time autogenerated kernel key: 505f0cb41da65a7ebed3e8e9ed5364fb4a8fc5c3'
[    3.400747] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    3.401845] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    3.401849] blacklist: Loading compiled-in revocation X.509 certificates
[    3.401886] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    3.401922] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    3.401951] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    3.402001] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    3.402032] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    3.402066] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    3.402100] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    3.402134] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    3.403037] zswap: loaded using pool lzo/zbud
[    3.407315] Key type .fscrypt registered
[    3.407319] Key type fscrypt-provisioning registered
[    3.416211] Key type encrypted registered
[    3.416234] AppArmor: AppArmor sha1 policy hashing enabled
[    3.416272] ima: No TPM chip found, activating TPM-bypass!
[    3.416286] Loading compiled-in module X.509 certificates
[    3.417487] Loaded X.509 cert 'Build time autogenerated kernel key: 505f0cb41da65a7ebed3e8e9ed5364fb4a8fc5c3'
[    3.417493] ima: Allocated hash algorithm: sha1
[    3.417509] ima: No architecture policies found
[    3.417531] evm: Initialising EVM extended attributes:
[    3.417533] evm: security.selinux
[    3.417535] evm: security.SMACK64
[    3.417537] evm: security.SMACK64EXEC
[    3.417539] evm: security.SMACK64TRANSMUTE
[    3.417540] evm: security.SMACK64MMAP
[    3.417541] evm: security.apparmor
[    3.417543] evm: security.ima
[    3.417544] evm: security.capability
[    3.417546] evm: HMAC attrs: 0x1
[    3.418126] PM:   Magic number: 0:836:924
[    3.418758] powernow_k8: fid 0x13 (2700 MHz), vid 0x9
[    3.418769] powernow_k8: fid 0x12 (2600 MHz), vid 0xa
[    3.418771] powernow_k8: fid 0x10 (2400 MHz), vid 0xc
[    3.418773] powernow_k8: fid 0xe (2200 MHz), vid 0xe
[    3.418775] powernow_k8: fid 0xc (2000 MHz), vid 0x10
[    3.418777] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[    3.418779] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[    3.418988] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
[    3.419103] RAS: Correctable Errors collector initialized.
[    3.419164] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    3.424377] Freeing unused decrypted memory: 2036K
[    3.429237] Freeing unused kernel image (initmem) memory: 4764K
[    3.440503] Write protecting the kernel read-only data: 34816k
[    3.442114] Freeing unused kernel image (rodata/data gap) memory: 1624K
[    3.499180] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.499335] Run /init as init process
[    3.499339]   with arguments:
[    3.499341]     /init
[    3.499343]     maybe-ubiquity
[    3.499344]     splash
[    3.499346]   with environment:
[    3.499347]     HOME=/
[    3.499349]     TERM=linux
[    3.499350]     BOOT_IMAGE=/casper/vmlinuz
[    3.499352]     boot=casper
[    3.780652] scsi host0: pata_atiixp
[    3.780858] Floppy drive(s): fd0 is 1.44M
[    3.782710] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    3.782937] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
[    3.793238] scsi host1: pata_atiixp
[    3.793379] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[    3.793384] ata2: DUMMY
[    3.799585] hid: raw HID events driver (C) Jiri Kosina
[    3.804394] FDC 0 is a post-1991 82077
[    3.816725] usb-storage 1-5:1.0: USB Mass Storage device detected
[    3.818677] scsi host2: usb-storage 1-5:1.0
[    3.818854] usbcore: registered new interface driver usb-storage
[    3.819373] r8169 0000:02:00.0 eth0: RTL8168b/8111b, fe:70:aa:16:77:78, XID 380, IRQ 19
[    3.819389] r8169 0000:02:00.0 eth0: jumbo features [frames: 4074 bytes, tx checksumming: ko]
[    3.827565] usbcore: registered new interface driver usbhid
[    3.827577] usbhid: USB HID core driver
[    3.976160] ata1.00: ATA-6: WDC WD800BB-00JKA0, 05.01C05, max UDMA/100
[    3.976168] ata1.00: 156301488 sectors, multi 1: LBA
[    3.976176] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H44N, RB00, max UDMA/66
[    4.007604] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-00JK 1C05 PQ: 0 ANSI: 5
[    4.009048] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.009091] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    4.009175] sd 0:0:0:0: [sda] Write Protect is off
[    4.009175] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.013769] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-H44N  RB00 PQ: 0 ANSI: 5
[    4.013944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.014153] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    4.093018] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.093026] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.126821] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    4.127263] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    4.141984]  sda: sda1
[    4.142202] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.156019] ahci 0000:00:12.0: version 3.0
[    4.156805] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA
[    4.156925] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    4.156930] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    4.157357] input: YK 2.4G Wireless Device Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/0003:3938:1080.0001/input/input3
[    4.157689] input: YK 2.4G Wireless Device System Control as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/0003:3938:1080.0001/input/input4
[    4.158234] usbcore: registered new interface driver uas
[    4.160387] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    4.165636] scsi host3: ahci
[    4.170648] scsi host4: ahci
[    4.172464] scsi host5: ahci
[    4.215692] scsi host6: ahci
[    4.215849] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    4.215854] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    4.215858] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    4.215861] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    4.217690] ACPI: bus type drm_connector registered
[    4.220681] input: YK 2.4G Wireless Device Consumer Control as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/0003:3938:1080.0001/input/input5
[    4.220786] hid-generic 0003:3938:1080.0001: input,hidraw0: USB HID v2.00 Mouse [YK 2.4G Wireless Device] on usb-0000:00:13.0-2/input0
[    4.221254] input: YK 2.4G Wireless Device as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/0003:3938:1080.0002/input/input6
[    4.280895] hid-generic 0003:3938:1080.0002: input,hidraw1: USB HID v2.00 Keyboard [YK 2.4G Wireless Device] on usb-0000:00:13.0-2/input1
[    4.530995] ata5: SATA link down (SStatus 0 SControl 300)
[    4.535046] ata6: SATA link down (SStatus 0 SControl 300)
[    4.535071] ata4: SATA link down (SStatus 0 SControl 300)
[    4.692511] ata3: softreset failed (device not ready)
[    4.692546] ata3: applying PMP SRST workaround and retrying
[    4.852515] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.853180] ata3.00: ATA-10: SanDisk SSD PLUS 240GB, UF4004RL, max UDMA/133
[    4.853185] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32)
[    4.854147] ata3.00: Features: Dev-Sleep
[    4.854152] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    4.860337] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    4.860345] ata3.00: configured for UDMA/133
[    4.860410] scsi: waiting for bus probes to complete ...
[    5.701342] scsi 2:0:0:0: Direct-Access     Generic  Flash Disk       1100 PQ: 0 ANSI: 4
[    5.702074] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.702590] scsi 3:0:0:0: Direct-Access     ATA      SanDisk SSD PLUS 04RL PQ: 0 ANSI: 5
[    5.702964] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[    5.704602] sd 3:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    5.704626] sd 3:0:0:0: [sdc] Write Protect is off
[    5.704629] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.704652] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.704969] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[    5.705050] sd 2:0:0:0: [sdb] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[    5.706278] sd 2:0:0:0: [sdb] Write Protect is off
[    5.706290] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    5.708681] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.718435]  sdb: sdb1 sdb2 sdb3
[    5.718775] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    5.725216]  sdc: sdc1 sdc2
[    5.725535] sd 3:0:0:0: [sdc] Attached SCSI disk
[    6.512496] random: crng init done
[    8.138781] EXT4-fs (dm-0): mounted filesystem a712e84c-f261-46ef-abef-91381a2328c7 with ordered data mode. Quota mode: none.
[    8.140805] EXT4-fs (dm-0): unmounting filesystem a712e84c-f261-46ef-abef-91381a2328c7.
[    8.577169] EXT4-fs (sda1): mounted filesystem e09a8bba-a151-4ebb-8ab7-9f9b6c60608b with ordered data mode. Quota mode: none.
[    8.600530] EXT4-fs (sda1): unmounting filesystem e09a8bba-a151-4ebb-8ab7-9f9b6c60608b.
[    8.995247] ISO 9660 Extensions: Microsoft Joliet Level 3
[    8.997746] ISO 9660 Extensions: RRIP_1991A
[    9.022996] ISO 9660 Extensions: Microsoft Joliet Level 3
[    9.025372] ISO 9660 Extensions: RRIP_1991A
[    9.101272] loop0: detected capacity change from 0 to 5060704
[    9.126530] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[    9.304505] EXT4-fs (sdb3): recovery complete
[    9.320303] EXT4-fs (sdb3): mounted filesystem 3d76b2c8-ef28-11ee-9d9f-83388b926066 with ordered data mode. Quota mode: none.
[   21.001660] systemd[1]: Inserted module 'autofs4'
[   21.119716] systemd[1]: systemd 249.11-0ubuntu3.10 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   21.119716] systemd[1]: Detected architecture x86-64.
[   21.130444] systemd[1]: Initializing machine ID from random generator.
[   22.967108] systemd[1]: Queued start job for default target Graphical Interface.
[   22.985551] systemd[1]: Created slice Slice /system/modprobe.
[   22.986199] systemd[1]: Created slice User and Session Slice.
[   22.986378] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   22.986753] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   22.986884] systemd[1]: Reached target User and Group Name Lookups.
[   22.986919] systemd[1]: Reached target Remote File Systems.
[   22.986952] systemd[1]: Reached target Slice Units.
[   22.986991] systemd[1]: Reached target Swaps.
[   22.987042] systemd[1]: Reached target Local Verity Protected Volumes.
[   22.987220] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   22.989733] systemd[1]: Listening on LVM2 poll daemon socket.
[   22.990077] systemd[1]: Listening on Syslog Socket.
[   22.990218] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   22.991955] systemd[1]: Listening on Journal Audit Socket.
[   22.992233] systemd[1]: Listening on Journal Socket (/dev/log).
[   22.992462] systemd[1]: Listening on Journal Socket.
[   22.994834] systemd[1]: Listening on udev Control Socket.
[   22.995122] systemd[1]: Listening on udev Kernel Socket.
[   22.997261] systemd[1]: Mounting Huge Pages File System...
[   22.999720] systemd[1]: Mounting POSIX Message Queue File System...
[   23.002432] systemd[1]: Mounting Kernel Debug File System...
[   23.005339] systemd[1]: Mounting Kernel Trace File System...
[   23.021052] systemd[1]: Starting Journal Service...
[   23.021506] systemd[1]: Finished Availability of block devices.
[   23.024561] systemd[1]: Starting Set the console keyboard layout...
[   23.065067] systemd[1]: Starting Create List of Static Device Nodes...
[   23.067847] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   23.085454] systemd[1]: Starting Load Kernel Module configfs...
[   23.088409] systemd[1]: Starting Load Kernel Module drm...
[   23.100004] systemd[1]: Starting Load Kernel Module efi_pstore...
[   23.112386] systemd[1]: Starting Load Kernel Module fuse...
[   23.149086] systemd[1]: Starting Load Kernel Modules...
[   23.151823] systemd[1]: Starting Remount Root and Kernel File Systems...
[   23.161486] systemd[1]: Starting Coldplug All udev Devices...
[   23.173033] systemd[1]: Mounted Huge Pages File System.
[   23.173783] systemd[1]: Mounted POSIX Message Queue File System.
[   23.174333] systemd[1]: Mounted Kernel Debug File System.
[   23.174923] systemd[1]: Mounted Kernel Trace File System.
[   23.176080] systemd[1]: Finished Create List of Static Device Nodes.
[   23.178128] systemd[1]: [email protected]: Deactivated successfully.
[   23.178679] systemd[1]: Finished Load Kernel Module configfs.
[   23.179325] systemd[1]: [email protected]: Deactivated successfully.
[   23.179821] systemd[1]: Finished Load Kernel Module drm.
[   23.180462] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   23.181122] systemd[1]: Finished Load Kernel Module efi_pstore.
[   23.182113] systemd[1]: [email protected]: Deactivated successfully.
[   23.182699] systemd[1]: Finished Load Kernel Module fuse.
[   23.186271] systemd[1]: Mounting FUSE Control File System...
[   23.188954] systemd[1]: Mounting Kernel Configuration File System...
[   23.222986] systemd[1]: Finished Remount Root and Kernel File Systems.
[   23.223871] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   23.249275] systemd[1]: Starting Load/Save Random Seed...
[   23.256433] systemd[1]: Starting Create System Users...
[   23.271114] systemd[1]: Mounted FUSE Control File System.
[   23.271838] systemd[1]: Mounted Kernel Configuration File System.
[   23.281717] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   23.284357] systemd[1]: Started Journal Service.
[   23.364162] systemd-journald[757]: Received client request to flush runtime journal.
[   23.444609] lp: driver loaded but no devices found
[   23.478319] ppdev: user-space parallel port driver
[   23.487194] parport_pc 00:05: reported by Plug and Play ACPI
[   23.487280] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   23.591380] lp0: using parport0 (interrupt-driven).
[   38.153992] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   39.570042] RTL8211B Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[   39.637087] r8169 0000:02:00.0 enp2s0: Link is Down
[   41.082025] kvm: Nested Virtualization enabled
[   41.082037] SVM: kvm: Nested Paging disabled
[   41.082052] SVM: LBR virtualization supported
[   41.166348] MCE: In-kernel MCE decoding enabled.
[   41.434689] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off
[   41.434720] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   41.592250] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   41.592268] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   41.592271] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   41.592274] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   41.592277] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   41.592279] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   41.592283] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   41.592285] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   41.592287] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   41.617485] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   41.617632] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   41.617725] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   41.619797] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   41.619969] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   42.819963] mtrr: base(0xf9000000) is not aligned on a size(0xe00000) boundary
[  139.740688] mtrr: base(0xf9000000) is not aligned on a size(0xe00000) boundary
[  148.271467] rfkill: input handler disabled
[  418.076490] raid6: sse2x4   gen()  4744 MB/s
[  418.144488] raid6: sse2x2   gen()  5106 MB/s
[  418.212486] raid6: sse2x1   gen()  4374 MB/s
[  418.212490] raid6: using algorithm sse2x2 gen() 5106 MB/s
[  418.280485] raid6: .... xor() 3531 MB/s, rmw enabled
[  418.280489] raid6: using intx1 recovery algorithm
[  418.285569] xor: measuring software checksum speed
[  418.286644]    prefetch64-sse  :  9283 MB/sec
[  418.287709]    generic_sse     :  9283 MB/sec
[  418.287711] xor: using function: generic_sse (9283 MB/sec)
[  418.643619] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[  418.872068] JFS: nTxBlock = 8192, nTxLock = 65536
[  419.512576] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 1124.961435] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 1261.553680] traps: epiphany[3755] general protection fault ip:7f5152f5c761 sp:7fffc6197f08 error:0 in libgobject-2.0.so.0.7600.3[7f5152f2f000+36000]
ata3 de softreset failed yazıyor ve hata olarak yine
[ 0.606966] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20221020/dspkginit-438)
 
Son düzenleme:

Geri
Yukarı