KERNEL_MODE_EXCEPTION_NOT_HANDLED Mavi Ekran Sorunu

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


KERNEL_MODE_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x1000008e (0xc0000005, 0x814e79d5, 0x90bd69e8, 0x00000000)


*** ntoskrnl.exe - Address 0x814e79d5 base at 0x8121e000 DateStamp 0x50ecebab

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: dxgmms1.sys


SYSTEM_THREAD_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x1000007e (0xc0000005, 0x8fb940b2, 0x823aa350, 0x823a9f20)


*** dxgmms1.sys - Address 0x8fb940b2 base at 0x8fb73000 DateStamp 0x50ecea8b

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: ntoskrnl.exe


DRIVER_POWER_STATE_FAILURE


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000009f (0x00000003, 0x849d4030, 0x80555b00, 0x89cba008)


*** ntoskrnl.exe - Address 0x8111d614 base at 0x81069000 DateStamp 0x50ecebab

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: halmacpi.dll


IRQL_NOT_LESS_OR_EQUAL


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x0000000a (0x8afe7638, 0x00000002, 0x00000001, 0x81c208e1)


*** halmacpi.dll - Address 0x81a10000 base at 0x81a09000 DateStamp 0x5010add0

Technical Information:


*** STOP: 0x00000133 (0x00000001, 0x00000784, 0x00000000, 0x00000000)


*** ntoskrnl.exe - Address 0x816c3614 base at 0x8160f000 DateStamp 0x50ecebab

A problem has been detected and Windows has been shut down to prevent damage
to your computer.


The problem seems to be caused by the following file: dxgkrnl.sys


KERNEL_MODE_EXCEPTION_NOT_HANDLED


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:


Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.


If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.


Technical Information:


*** STOP: 0x1000008e (0xc000001d, 0x8f8458a8, 0xb0c4bbb8, 0x00000000)


*** dxgkrnl.sys - Address 0x8f8458a8 base at 0x8f81d000 DateStamp 0x5010acbb

KERNEL_MODE_EXCEPTION_NOT_HANDLED