Memory Management Mavi ekran Hatası

İşletim sistemi
Windows 10

Sonmohicann

Hectopat
Katılım
6 Temmuz 2018
Mesajlar
35
Ekran kartı ve RAM'lerimi değiştirdim. Formatla temiz kurulum yaptım 3 gün önce. Ama günde 1 kere bilgisayarı ilk açtığımda mavi ekran hatası alıyorum. Sonra yeniden başlatıyor bilgisayarı masaüstü geliyor hop tekrardan bilgisayar kendi kendine yeniden başlıyor. Her sabah böyle uğraştıktan sonra gün boyu sıkıntısız kullanıyorum bilgisayarı. Dmp dosyalarını ekleyeceğim. RAM'leri Windows Memory diagnostic ile test ettiğimde bir sorun çıkmamıştı gece de Memtest86'yı açacağım.
Ryzen 7 3700X
G.Skill Ripjaws V 32 GB 3600MHz(16x2)
MSI B450TOMAHawk Max(4133MHz kadar destekliyor)
Zotac 3060 Ti
Ve windows update 2OH2 güncellemesi yüklerken hep bu hatayı alıyorum.
Güncelleştirmeleri yüklerken bazı sorunlar oluştu, ancak daha sonra yeniden deneyeceğiz. Bunu görmeye devam ederseniz ve bilgi için Web'de arama yapmak ya da destek birimine başvurmak isterseniz bu yardımcı olabilir: (0x80073701)
 
Bence takıldığı slotta kalsın. Farklı slota takınca farklı sonuç vermeyeceğini düşünüyorum.

Üstat bir de bende sistemi kurduğum SSD dışında depolama olarak kullandığım eski HDD var. Ben ne zaman format atsam formattan sonra ilk başlatırken bilgisayarı hangi Windows 10'u başlatmak istiyorsunuz diye soruyor. Acaba bu HDD'de Windows falan kurulu olabilir mi? Saçma bir soru oldu belki ama inan hatırlamıyorum bunda Windows kurulu muydu değil miydi? Dosyalarına baktığımda da Windows sistem gibi dosyalar gözükmüyor HDD'de. Belki bu da sebep olabiliyordur diye bir sana sorayım dedim.
 
HDD'de Windows10 ait dosyalar yoksa Windows10 kurulu değildir.

Eski HDD olunca test edelim. Test etmekten zarar gelmez.

HDD Sentinel ile sağlık değerlerini bakın. İnternete HDD Sentinel yazarsanız görürseniz zaten.

HD Tune ile "error scan" testi yapın. İnternete yazarsanız görürsünüz. Bad sector var mı diye bakacağız.
 
HDD'de Windows10 ait dosyalar yoksa Windows10 kurulu değildir.

Eski HDD olunca test edelim. Test etmekten zarar gelmez.

HDD Sentinel ile sağlık değerlerini bakın. İnternete HDD Sentinel yazarsanız görürseniz zaten.

HD Tune ile "error scan" testi yapın. İnternete yazarsanız görürsünüz. Bad sector var mı diye bakacağız.

Sabah yine mavi ekran aldım ama son 2 gündür Memory management mavi ekran hatası almıyorum. Dün System service exception ve IRQL_NOT_LESS_OR_EQUAL idi. Bugünde kernel Security check failure mavi ekran hatasını aldım sonrasında yeniden başlatınca winload. EFI ile ilgili bir hata aldım SS'ini ekleyeceğim DMP dosyası oluşmadığı için onu ekleyemiyorum. Diğer RAM'i tek başına takılı olduğu slotta test ettim bir sorun çıkmadı. HDD Tune ile SSD'imi test ettim hiç error bulmadı şu an HDD'imi test ediyorum test %75'inde 3 tane error buldu.
Bu Ryzen işlemcilerde RAM uyumluluğu çok önemliymiş galiba. Anakartın kendi sitesinde RAM'im uyumlu gözükmüyor ama başka bir sitede uyumlu olduğunu söylüyor. Vatan Bilgisayar vs diğer sitelerdede istediğim özelliklerde RAM bulamıyorum hangisini anakartın sitesinden kontrol etsem hep Single çalıştığını söylüyor.
Sabahki mavi ekran sonrası: 13565843-3971-4ab5-be55-e9c99ece67ba.jpg
 
HDD'yi sistemden çıkartın. 3 tane hata bulmuş. Çıkardıktan sonra mavi ekran alırsanız minidump dosyasını paylaşın.

Eğer almaz iseniz HDD sorunlu olduğunu belli olacak.
 
HDD'yi sistemden çıkartın. 3 tane hata bulmuş. Çıkardıktan sonra mavi ekran alırsanız minidump dosyasını paylaşın.

Eğer almaz iseniz HDD sorunlu olduğunu belli olacak.

Mavi ekran aldığım tek zaman dilimi bilgisayarı gün içinde ilk başlattığım zaman. Bunun için yarın sabahı beklememmi gerekiyor illa yoksa başka bir yolla şimdi test edebilir miyim?
Ve RAM'ler hakkında düşünceniz nedir? [Çözüldü] Memory management hatası şu konuda Memtest'te sorun olmamısına rağmen RAM değiştirerek sorunu çözmüş birkaç kişi.
1 Hafta oldu RAM'i alalı Vatan Bilgisayar'dan. RAM'lerimi 1 hafta içinde koşulsuz şartsız iade edebiliyorum ne önerirsin?
 
Eğer RAM'lerden şüphe ediyorsan iade talebi oluşturabilirsin kesinlikle. En iyisi işini garantiye alıp iade oluşturabilirsiniz.

Bir HDD olayına bakalım. HDD'de kaç hata buldu toplam? HDD sorunlu gibi gözüküyor.
 
Eğer RAM'lerden şüphe ediyorsan iade talebi oluşturabilirsin kesinlikle. En iyisi işini garantiye alıp iade oluşturabilirsiniz.

Bir HDD olayına bakalım. HDD'de kaç hata buldu toplam? HDD sorunlu gibi gözüküyor.


Böyle.

Ekran Görüntüsü (4).png
 
HDD'de sorun var belli gibi. Test bitince HDD'yi bir süre kullanmayın. Eğer mavi ekran almazsan HDD sorun var galiba demek.

İsterseniz RAM'leri değiştirebilirsiniz. Şüpheniz varsa RAM'leri değiştirin.
 
@Ted Kaczynski Dün gece bilgisayarı kapattıktan sonra HDD'nin SATA kablosunu sökmüştüm. Sabah bilgisayarı açarken "an operating System wasnt found press CTRL alt delete to restart" yazısı aldım. Yeniden başlattım yine aynı yazı geldi. Sonra HDD'nin SATA kablosunu taktım Memory management ve kernel data in page error mavi ekranlarını aldım arka arkaya.
DMP dosyaları


Crash Dump Analysis



Crash dumps are enabled on your computer.

Crash dump directories:
C:\Windows
C:\Windows\Minidump
C:\Users\burak\Desktop\Minidump

On Sun 13.12.2020 14:24:46 your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe (nt!memset+0xFDB8)
Bugcheck code: 0x7A (0x1, 0xFFFFFFFFC0000005, 0xFFFFCA0B3C3B5340, 0xFFFF843FFA828000)
Error: KERNEL_DATA_INPAGE_ERROR
Bug check description: This bug check indicates that the requested page of kernel data from the paging file could not be read into memory.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 13.12.2020 14:24:46 your computer crashed or a problem was reported
crash dump file: C:\Users\burak\Desktop\Minidump\121320-5968-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780)
Bugcheck code: 0x7A (0x1, 0xFFFFFFFFC0000005, 0xFFFFCA0B3C3B5340, 0xFFFF843FFA828000)
Error: KERNEL_DATA_INPAGE_ERROR
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the requested page of kernel data from the paging file could not be read into memory.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sat 12.12.2020 17:17:06 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\121220-6671-01.dmp
This was probably caused by the following module: fltmgr.sys (0xFFFFF80310604A1E)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80310604A1E, 0xFFFF950E51BEF8E0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\fltmgr.sys
product: Microsoft® Windows® İşletim Sistemi
company: Microsoft Corporation
description: Microsoft Dosya Sistemi Filtre Yöneticisi
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK.



On Fri 11.12.2020 11:50:50 your computer crashed or a problem was reported
crash dump file: C:\Users\burak\Desktop\Minidump\121120-5734-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8035AFEDB9F, 0xFFFFFA86173E6050, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Fri 11.12.2020 11:50:04 your computer crashed or a problem was reported
crash dump file: C:\Users\burak\Desktop\Minidump\121120-6375-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780)
Bugcheck code: 0xA (0xE900000000, 0x2, 0x1, 0xFFFFF8036D665892)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug.
This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Thu 10.12.2020 14:00:12 your computer crashed or a problem was reported
crash dump file: C:\Users\burak\Desktop\Minidump\MEMORY.DMP
This was probably caused by the following module: hardware.sys (hardware)
Bugcheck code: 0x1A (0x41792, 0xFFFFF43FFF0D6380, 0x2000000000, 0x0)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred. A corrupted PTE has been detected.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue).
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: hardware.sys .
Google query: hardware.sys MEMORY_MANAGEMENT



On Thu 10.12.2020 14:00:12 your computer crashed or a problem was reported
crash dump file: C:\Users\burak\Desktop\Minidump\121020-5578-01.dmp
This was probably caused by the following module: hardware.sys (hardware)
Bugcheck code: 0x1A (0x41792, 0xFFFFF43FFF0D6380, 0x2000000000, 0x0)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred. A corrupted PTE has been detected.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue).
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: hardware.sys .
Google query: hardware.sys MEMORY_MANAGEMENT



On Thu 10.12.2020 13:58:31 your computer crashed or a problem was reported
crash dump file: C:\Users\burak\Desktop\Minidump\121020-8390-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780)
Bugcheck code: 0x50 (0xFFFFF3DDC0602FE0, 0x0, 0xFFFFF8021AC4D0D4, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 9.12.2020 13:50:32 your computer crashed or a problem was reported
crash dump file: C:\Users\burak\Desktop\Minidump\120920-9453-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF801290E55C4, 0xFFFFFB0FCE101E38, 0xFFFFFB0FCE101670)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



The following dump files were found but could not be read. These files may be corrupted:
C:\Users\burak\Desktop\Minidump\121320-6687-01.dmp





Conclusion



On your computer a total of 12 crash dumps have been found. Only 10 have been analyzed. Only 9 are included in this report. If dump files are found and they could not be analuzed, it means they are corrupted. Because crash dumps are an emergency measure it is not uncommon for this to happen, however often it points to a problem in the storage stack. It is suggested that you run CHKDSK on your system drive to check your drive for errors.
A third party driver has been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:

hardware.sys

If no updates for these drivers are available, try searching with Google on the names of these drivers in combination with the errors that have been reported for these drivers. Include the brand and model name of your computer as well in the query. This often yields interesting results from discussions on the web by users who have been experiencing similar problems.
 
Bir minidump açılmadı çünkü boyutu yoktu. Hiç hata dökümü vermemiş.

Bir tamesinde pek anlamadım ama RAM'ler ilgili şüphe duydum gibi.

Siz mavi ekran aldıkça minidump dosyasını paylaşın.

SATA kablosu takılı kalsın.
 

Geri
Yukarı