PC Açılırken Üst Üste 3 Kere Mavi Ekran

NirvanA1

Kilopat
Katılım
9 Eylül 2012
Mesajlar
975
Makaleler
1
Çözümler
1
Daha fazla  
Meslek
Okula giden kurbanlık koyunlardan(LİSE)
Arkadaşlar, Bu gün Pc'yi yaklaşık 7-8 kere açtım ve 3 kere Mavi ekran aldım. Sizce neden oluyor, nasıl çözebilirim ?


Bu resim işinize yarar mı ? :


g1z5x.png
 
Ortada mavi ekrana neden olan bir sürücü yok. Çöken işletim sisteminin çekirdeğine ait bir dosya. Hatayı tekrar alırsan yeni Dump'ları paylaş, incelemeye devam edelim. Şu an hastaya bir tanı koyamadığımız için ilaç yazamıyoruz.

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 
0xfffff8000309ff74)

*** ntoskrnl.exe - Address 0xfffff8000308afc0 base at 0xfffff8000300c000 DateStamp 
0x503f82be

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 
0xfffff800030ddf74)

*** ntoskrnl.exe - Address 0xfffff800030c8fc0 base at 0xfffff8000304a000 DateStamp 
0x503f82be

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 
0xfffff800030e7f74)

*** ntoskrnl.exe - Address 0xfffff800030d2fc0 base at 0xfffff80003054000 DateStamp 
0x503f82be
 
Yine aynı hata, değişen pek bir şey yok gibi.

Windows 8 yükler misin. Sürücü uyuşmazlığı veya çakışma gibi bir sorun gibime geldi.

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 
0xfffff800030aaf74)

*** ntoskrnl.exe - Address 0xfffff80003095fc0 base at 0xfffff80003017000 DateStamp 
0x503f82be
 
Bu hata Ekran kartı ve PSU'yu değiştirdikten sonra başladı. Ondan olabilir mi ?
 
Son düzenleyen: Moderatör:
Nisan'a veya Haziran'a doğru 4500 TL civarı bir sistem toplayabilirim, o zamana kadar idare eder mi ? Bir de Asus 7970 DirectUII Matrix ile CrossFire yapacağım. 2 Ekran kartına da PCI-Express bağlamam gerekli mi ? Öyleyse 4 tane 8 pinlik PCI-E Kabloya ihtiyacım olacak.

Diğer bir soru 2 Ekran Kartı'na da O.C yapabilir miyim CF. de ?
 
Son düzenleyen: Moderatör:
Uyarı! Bu konu 13 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Technopat Haberler

Geri
Yukarı