Çözüldü R5 3600X-RTX 3060 sistem açılırken "FAULT IN NONPAGED AREA" hatası

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
İşletim sistemi
Windows 11

cartel.exe

Hectopat
Katılım
8 Ocak 2021
Mesajlar
4.955
Makaleler
1
Çözümler
26
Yer
Los Angeles
RAM
Kingston HyperX 2x16 3200mhz cl16
SSD veya HDD modeli
Samsung 970 Evo Plus + WD Blue 7200RPM 1TB HDD
Ekran kartı
RTX 3060 12GB
Anakart
Asus Prime B550M-A Wifi
İşlemci
AMD R5 3600x


Bu şekilde 4 tane minidump dosyam var.
Occt Power testinde PC kapandı sanırım işlemci ısısından dolayı 120 dereceye kadar çıktı. Memory ve CPU testinde bir sorun göremedim. VRam ve 3D testinde de bir sorun yok.
 
Son düzenleyen: Moderatör:
Çözüm
120 dereceye kadar çıktı.
👀🫢

Mavi ekranların hepsi aynı.
vgk.sys = Riot Vanguard sebebiyle kaynaklanmış.
Son zamanlarda çok sık karşılaşılan bir hata.


* Şu konuya girip sadece Vanguard ile alakalı silme / tekrar yükleme işlemini gerçekleştirin.
* Sonra kendi konunuza geri dönersiniz.


* Ayrıca Windows işletim sisteminden hızlı başlat özelliğini kapatın.




- BIOS epey ama epey eski.
- Haziran 2020 tarihli 0603 sürümünü kullanıyorsunuz.
- Neredeyse anakartın çıktığı zamandan kalma bir BIOS.
- Bu süreç içerisinde çok fazla kalite, performans ve stabilite güncelleştirmesi gelmiş.
- 3002 sürümüne güncelleyin.


* BIOS güncelleme rehber videosu: Asus Anakartlarda BIOS Güncelleme | 2023

* BIOS'u güncelledikten sonra BIOS'a girin, F5 tuşuna basın ve gelen "Load optimized defaults?" sorusuna "Yes" deyip BIOS'tan çıkın. BIOS'a tekrar girin ve ayarlarınızı yapın (RAM XMP profili, fan ayarları vs.).


Döküm:
Kod:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: ffffcc81d21d0704, memory referenced.
Arg2: 0000000000000000, X64: bit 0 set if the fault was due to a not-present PTE.
    bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the processor decided the fault was due to a corrupted PTE.
    bit 4 is set if the fault was due to attempted execute of a no-execute PTE.
    - ARM64: bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the fault was due to attempted execute of a no-execute PTE.
Arg3: fffff8037c97f511, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for vgk.sys

KEY_VALUES_STRING: 1

    Key  : AV.Type
    Value: Read

    Key  : Analysis.CPU.mSec
    Value: 2187

    Key  : Analysis.Elapsed.mSec
    Value: 4142

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 187

    Key  : Analysis.Init.Elapsed.mSec
    Value: 2546

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 142

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x50

    Key  : Failure.Bucket
    Value: AV_R_(null)_vgk!unknown_function

    Key  : Failure.Hash
    Value: {2c74f9bf-c695-1cb8-996e-ae91d1a2ef92}

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Version
    Value: 10.0.22621.1


BUGCHECK_CODE:  50

BUGCHECK_P1: ffffcc81d21d0704

BUGCHECK_P2: 0

BUGCHECK_P3: fffff8037c97f511

BUGCHECK_P4: 0

FILE_IN_CAB:  071023-12156-01.dmp

READ_ADDRESS: fffff80366d1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffffcc81d21d0704

MM_INTERNAL_CODE:  0

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  vgc.exe

TRAP_FRAME:  fffff406cac52e80 -- (.trap 0xfffff406cac52e80)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000f48 rbx=0000000000000000 rcx=ffffcc81d21d0704
rdx=00002784f8a82bec rsi=0000000000000000 rdi=0000000000000000
rip=fffff8037c97f511 rsp=fffff406cac53018 rbp=ffff98036973eb50
 r8=0000000000000046  r9=ffffcc81d21d0704 r10=0000000000000704
r11=ffffcc81d21d0000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac po cy
vgk+0x2f511:
fffff803`7c97f511 413801          cmp     byte ptr [r9],al ds:ffffcc81`d21d0704=00
Resetting default scope

STACK_TEXT:
fffff406`cac52c58 fffff803`664a77a9     : 00000000`00000050 ffffcc81`d21d0704 00000000`00000000 fffff406`cac52e80 : nt!KeBugCheckEx
fffff406`cac52c60 fffff803`662eb42c     : fffff406`cac532f0 00000000`00000000 fffff406`cac52e19 00000000`00000000 : nt!MiSystemFault+0x1bf299
fffff406`cac52d60 fffff803`6643c529     : 00000000`00000000 00000000`00000000 ffff9803`6973ebf0 00000000`00000000 : nt!MmAccessFault+0x29c
fffff406`cac52e80 fffff803`7c97f511     : fffff803`7ca2ba1d ffff9803`5c0fad90 00000000`000000e0 00000001`7d7ad000 : nt!KiPageFault+0x369
fffff406`cac53018 fffff803`7ca2ba1d     : ffff9803`5c0fad90 00000000`000000e0 00000001`7d7ad000 00000000`00000090 : vgk+0x2f511
fffff406`cac53020 ffff9803`5c0fad90     : 00000000`000000e0 00000001`7d7ad000 00000000`00000090 00000000`000000a0 : vgk+0xdba1d
fffff406`cac53028 00000000`000000e0     : 00000001`7d7ad000 00000000`00000090 00000000`000000a0 00000000`00000001 : 0xffff9803`5c0fad90
fffff406`cac53030 00000001`7d7ad000     : 00000000`00000090 00000000`000000a0 00000000`00000001 00000000`00000001 : 0xe0
fffff406`cac53038 00000000`00000090     : 00000000`000000a0 00000000`00000001 00000000`00000001 ffff9803`6f0c1608 : 0x00000001`7d7ad000
fffff406`cac53040 00000000`000000a0     : 00000000`00000001 00000000`00000001 ffff9803`6f0c1608 00000000`00000046 : 0x90
fffff406`cac53048 00000000`00000001     : 00000000`00000001 ffff9803`6f0c1608 00000000`00000046 fffff803`7caf8654 : 0xa0
fffff406`cac53050 00000000`00000001     : ffff9803`6f0c1608 00000000`00000046 fffff803`7caf8654 fffff406`cac532f0 : 0x1
fffff406`cac53058 ffff9803`6f0c1608     : 00000000`00000046 fffff803`7caf8654 fffff406`cac532f0 00000000`00000046 : 0x1
fffff406`cac53060 00000000`00000046     : fffff803`7caf8654 fffff406`cac532f0 00000000`00000046 00000001`7d7ad000 : 0xffff9803`6f0c1608
fffff406`cac53068 fffff803`7caf8654     : fffff406`cac532f0 00000000`00000046 00000001`7d7ad000 ffff9803`5c0fad90 : 0x46
fffff406`cac53070 fffff406`cac532f0     : 00000000`00000046 00000001`7d7ad000 ffff9803`5c0fad90 efa8246e`640232ce : vgk+0x1a8654
fffff406`cac53078 00000000`00000046     : 00000001`7d7ad000 ffff9803`5c0fad90 efa8246e`640232ce 00000000`00000000 : 0xfffff406`cac532f0
fffff406`cac53080 00000001`7d7ad000     : ffff9803`5c0fad90 efa8246e`640232ce 00000000`00000000 00000000`00000000 : 0x46
fffff406`cac53088 ffff9803`5c0fad90     : efa8246e`640232ce 00000000`00000000 00000000`00000000 1057db91`9bfdcd31 : 0x00000001`7d7ad000
fffff406`cac53090 efa8246e`640232ce     : 00000000`00000000 00000000`00000000 1057db91`9bfdcd31 fffff406`cac53408 : 0xffff9803`5c0fad90
fffff406`cac53098 00000000`00000000     : 00000000`00000000 1057db91`9bfdcd31 fffff406`cac53408 00000000`00000000 : 0xefa8246e`640232ce


SYMBOL_NAME:  vgk+2f511

MODULE_NAME: vgk

IMAGE_NAME:  vgk.sys

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  2f511

FAILURE_BUCKET_ID:  AV_R_(null)_vgk!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {2c74f9bf-c695-1cb8-996e-ae91d1a2ef92}

Followup:     MachineOwner
---------
120 dereceye kadar çıktı.
👀🫢

Mavi ekranların hepsi aynı.
vgk.sys = Riot Vanguard sebebiyle kaynaklanmış.
Son zamanlarda çok sık karşılaşılan bir hata.


* Şu konuya girip sadece Vanguard ile alakalı silme / tekrar yükleme işlemini gerçekleştirin.
* Sonra kendi konunuza geri dönersiniz.


* Ayrıca Windows işletim sisteminden hızlı başlat özelliğini kapatın.




- BIOS epey ama epey eski.
- Haziran 2020 tarihli 0603 sürümünü kullanıyorsunuz.
- Neredeyse anakartın çıktığı zamandan kalma bir BIOS.
- Bu süreç içerisinde çok fazla kalite, performans ve stabilite güncelleştirmesi gelmiş.
- 3002 sürümüne güncelleyin.


* BIOS güncelleme rehber videosu: Asus Anakartlarda BIOS Güncelleme | 2023

* BIOS'u güncelledikten sonra BIOS'a girin, F5 tuşuna basın ve gelen "Load optimized defaults?" sorusuna "Yes" deyip BIOS'tan çıkın. BIOS'a tekrar girin ve ayarlarınızı yapın (RAM XMP profili, fan ayarları vs.).


Döküm:
Kod:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: ffffcc81d21d0704, memory referenced.
Arg2: 0000000000000000, X64: bit 0 set if the fault was due to a not-present PTE.
    bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the processor decided the fault was due to a corrupted PTE.
    bit 4 is set if the fault was due to attempted execute of a no-execute PTE.
    - ARM64: bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the fault was due to attempted execute of a no-execute PTE.
Arg3: fffff8037c97f511, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for vgk.sys

KEY_VALUES_STRING: 1

    Key  : AV.Type
    Value: Read

    Key  : Analysis.CPU.mSec
    Value: 2187

    Key  : Analysis.Elapsed.mSec
    Value: 4142

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 0

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 187

    Key  : Analysis.Init.Elapsed.mSec
    Value: 2546

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 142

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x50

    Key  : Failure.Bucket
    Value: AV_R_(null)_vgk!unknown_function

    Key  : Failure.Hash
    Value: {2c74f9bf-c695-1cb8-996e-ae91d1a2ef92}

    Key  : WER.OS.Branch
    Value: ni_release

    Key  : WER.OS.Version
    Value: 10.0.22621.1


BUGCHECK_CODE:  50

BUGCHECK_P1: ffffcc81d21d0704

BUGCHECK_P2: 0

BUGCHECK_P3: fffff8037c97f511

BUGCHECK_P4: 0

FILE_IN_CAB:  071023-12156-01.dmp

READ_ADDRESS: fffff80366d1c468: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffffcc81d21d0704

MM_INTERNAL_CODE:  0

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  vgc.exe

TRAP_FRAME:  fffff406cac52e80 -- (.trap 0xfffff406cac52e80)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000f48 rbx=0000000000000000 rcx=ffffcc81d21d0704
rdx=00002784f8a82bec rsi=0000000000000000 rdi=0000000000000000
rip=fffff8037c97f511 rsp=fffff406cac53018 rbp=ffff98036973eb50
 r8=0000000000000046  r9=ffffcc81d21d0704 r10=0000000000000704
r11=ffffcc81d21d0000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac po cy
vgk+0x2f511:
fffff803`7c97f511 413801          cmp     byte ptr [r9],al ds:ffffcc81`d21d0704=00
Resetting default scope

STACK_TEXT:
fffff406`cac52c58 fffff803`664a77a9     : 00000000`00000050 ffffcc81`d21d0704 00000000`00000000 fffff406`cac52e80 : nt!KeBugCheckEx
fffff406`cac52c60 fffff803`662eb42c     : fffff406`cac532f0 00000000`00000000 fffff406`cac52e19 00000000`00000000 : nt!MiSystemFault+0x1bf299
fffff406`cac52d60 fffff803`6643c529     : 00000000`00000000 00000000`00000000 ffff9803`6973ebf0 00000000`00000000 : nt!MmAccessFault+0x29c
fffff406`cac52e80 fffff803`7c97f511     : fffff803`7ca2ba1d ffff9803`5c0fad90 00000000`000000e0 00000001`7d7ad000 : nt!KiPageFault+0x369
fffff406`cac53018 fffff803`7ca2ba1d     : ffff9803`5c0fad90 00000000`000000e0 00000001`7d7ad000 00000000`00000090 : vgk+0x2f511
fffff406`cac53020 ffff9803`5c0fad90     : 00000000`000000e0 00000001`7d7ad000 00000000`00000090 00000000`000000a0 : vgk+0xdba1d
fffff406`cac53028 00000000`000000e0     : 00000001`7d7ad000 00000000`00000090 00000000`000000a0 00000000`00000001 : 0xffff9803`5c0fad90
fffff406`cac53030 00000001`7d7ad000     : 00000000`00000090 00000000`000000a0 00000000`00000001 00000000`00000001 : 0xe0
fffff406`cac53038 00000000`00000090     : 00000000`000000a0 00000000`00000001 00000000`00000001 ffff9803`6f0c1608 : 0x00000001`7d7ad000
fffff406`cac53040 00000000`000000a0     : 00000000`00000001 00000000`00000001 ffff9803`6f0c1608 00000000`00000046 : 0x90
fffff406`cac53048 00000000`00000001     : 00000000`00000001 ffff9803`6f0c1608 00000000`00000046 fffff803`7caf8654 : 0xa0
fffff406`cac53050 00000000`00000001     : ffff9803`6f0c1608 00000000`00000046 fffff803`7caf8654 fffff406`cac532f0 : 0x1
fffff406`cac53058 ffff9803`6f0c1608     : 00000000`00000046 fffff803`7caf8654 fffff406`cac532f0 00000000`00000046 : 0x1
fffff406`cac53060 00000000`00000046     : fffff803`7caf8654 fffff406`cac532f0 00000000`00000046 00000001`7d7ad000 : 0xffff9803`6f0c1608
fffff406`cac53068 fffff803`7caf8654     : fffff406`cac532f0 00000000`00000046 00000001`7d7ad000 ffff9803`5c0fad90 : 0x46
fffff406`cac53070 fffff406`cac532f0     : 00000000`00000046 00000001`7d7ad000 ffff9803`5c0fad90 efa8246e`640232ce : vgk+0x1a8654
fffff406`cac53078 00000000`00000046     : 00000001`7d7ad000 ffff9803`5c0fad90 efa8246e`640232ce 00000000`00000000 : 0xfffff406`cac532f0
fffff406`cac53080 00000001`7d7ad000     : ffff9803`5c0fad90 efa8246e`640232ce 00000000`00000000 00000000`00000000 : 0x46
fffff406`cac53088 ffff9803`5c0fad90     : efa8246e`640232ce 00000000`00000000 00000000`00000000 1057db91`9bfdcd31 : 0x00000001`7d7ad000
fffff406`cac53090 efa8246e`640232ce     : 00000000`00000000 00000000`00000000 1057db91`9bfdcd31 fffff406`cac53408 : 0xffff9803`5c0fad90
fffff406`cac53098 00000000`00000000     : 00000000`00000000 1057db91`9bfdcd31 fffff406`cac53408 00000000`00000000 : 0xefa8246e`640232ce


SYMBOL_NAME:  vgk+2f511

MODULE_NAME: vgk

IMAGE_NAME:  vgk.sys

STACK_COMMAND:  .cxr; .ecxr ; kb

BUCKET_ID_FUNC_OFFSET:  2f511

FAILURE_BUCKET_ID:  AV_R_(null)_vgk!unknown_function

OS_VERSION:  10.0.22621.1

BUILDLAB_STR:  ni_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {2c74f9bf-c695-1cb8-996e-ae91d1a2ef92}

Followup:     MachineOwner
---------
 
Çözüm
- BIOS epey ama epey eski.
- Haziran 2020 tarihli 0603 sürümünü kullanıyorsunuz.
- Neredeyse anakartın çıktığı zamandan kalma bir BIOS.
- Bu süreç içerisinde çok fazla kalite, performans ve stabilite güncelleştirmesi gelmiş.
- 3002 sürümüne güncelleyin.

* BIOS güncelleme rehber videosu: Asus Anakartlarda BIOS Güncelleme | 2023

* BIOS'u güncelledikten sonra BIOS'a girin, F5 tuşuna basın ve gelen "Load optimized defaults?" sorusuna "Yes" deyip BIOS'tan çıkın. BIOS'a tekrar girin ve ayarlarınızı yapın (RAM XMP profili, fan ayarları vs.).
Hocam teşekkürler yapacağım fakat 3 senedir elektrik gider korkusuyla yapamıyorum. Bir ara yapacağım. Teşekkürler her şey için.
 

Geri
Yukarı