BAT dosyasını düzenleyerek "--LHR-Tune -1" yazmayı deneyebilirsiniz.
T-Rex NVIDIA GPU miner with web control monitoring page - trexminer/T-Rex
github.com
"LHR mode is enabled by default for LHR cards, however, if you want to override LHR Card Auto-detection, you can do so by specifying --LHR-Tune parameter which takes values from -1 to 100:
-1 - Auto-mode (LHR Tune is set to 71 (or 68'in Low Power mode) for LHR cards and 0 for non-LHR)
0 - disabled (use for non-LHR cards)
68 - recommended starting Value for most LHR cards in Low Power mode (see --LHR-Low-Power)
71 - recommended starting Value for most LHR cards
It can also be set for each GPU separately, e. G. --LHR-Tune 0, 0,71.5, 0 - this will tell the miner that the Third GPU is LHR and that it needs to start with the tuning Value of 71.5, while the rest of the cards are non-LHR.
Hive OS equivalent would be "LHR-Tune": "0, 0,71.5, 0""
