Çözüldü USB Bellek Biçimlendirilmiyor

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.
Çözüm
Eki Görüntüle 884182

Hocam şöyle bir hata alıyorum.
Microsoft Windows [Version 10.0.18363.1379] (c) 2019 Microsoft Corporation. Tüm hakları saklıdır. C:\WINDOWS\system32>diskpart Microsoft DiskPart version 10.0.18362.1171 Copyright (C) Microsoft Corporation. On computer: DESKTOP-GT6KC09 DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 119 GB 0 B * Disk 1 Online 931 GB 0 B Disk 2 Online 29 GB 29 GB DISKPART> select disk 2 Disk 2 is now the selected disk. DISKPART> clean DiskPart has encountered an error: Aygıt hazır değil. See the System Event Log for more information. DISKPART>



Bu araç ile bir ISO dosyası seçip yazdırmayı deneyin.
Yazdırma işlemini yarıda kesebilirsiniz.
Nasıl yapılacağını bilmiyorsanız anlatabilirim.
CMD'yi açın ve şunları girin tek tek:
  • diskpart
  • list disk
  • select disk 2 (Buradaki 2, sizin disk numaranız. Boyuta göre anlayabilirsiniz. Eğer emin olmak istiyorsanız disk yönetimine bakın.)
  • clean
  • create partition primary
  • format quick fs fat32
  • exit
  • exit
Not: USB üzerindeki her şeyi siler.
 
usb.PNG

CMD'yi açın ve şunları girin tek tek:
  • diskpart
  • list disk
  • select disk 2 (Buradaki 2, sizin disk numaranız. Boyuta göre anlayabilirsiniz. Eğer emin olmak istiyorsanız disk yönetimine bakın.)
  • clean
  • create partition primary
  • format quick fs fat32
  • exit
  • exit
Not: USB üzerindeki her şeyi siler.
Hocam şöyle bir hata alıyorum.
Microsoft Windows [Version 10.0.18363.1379] (c) 2019 Microsoft Corporation. Tüm hakları saklıdır. C:\WINDOWS\system32>diskpart Microsoft DiskPart version 10.0.18362.1171 Copyright (C) Microsoft Corporation. On computer: DESKTOP-GT6KC09 DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 119 GB 0 B * Disk 1 Online 931 GB 0 B Disk 2 Online 29 GB 29 GB DISKPART> select disk 2 Disk 2 is now the selected disk. DISKPART> clean DiskPart has encountered an error: Aygıt hazır değil. See the System Event Log for more information. DISKPART>
 
Eki Görüntüle 884182

Hocam şöyle bir hata alıyorum.
Microsoft Windows [Version 10.0.18363.1379] (c) 2019 Microsoft Corporation. Tüm hakları saklıdır. C:\WINDOWS\system32>diskpart Microsoft DiskPart version 10.0.18362.1171 Copyright (C) Microsoft Corporation. On computer: DESKTOP-GT6KC09 DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 119 GB 0 B * Disk 1 Online 931 GB 0 B Disk 2 Online 29 GB 29 GB DISKPART> select disk 2 Disk 2 is now the selected disk. DISKPART> clean DiskPart has encountered an error: Aygıt hazır değil. See the System Event Log for more information. DISKPART>



Bu araç ile bir ISO dosyası seçip yazdırmayı deneyin.
Yazdırma işlemini yarıda kesebilirsiniz.
Nasıl yapılacağını bilmiyorsanız anlatabilirim.
 
Çözüm
Rufus x64 v4.5.2180 (AppStore version)
Windows version: Windows 11 Pro x64 (Build 22631.3880)
Syslinux versions: 4.07/2013-07-25, 6.04/pre1
Grub versions: 0.4.6a, 2.12
System locale ID: 0x041F (tr-TR)
Will use default UI locale 0x041F
SetLGP: Successfully set NoDriveTypeAutorun policy to 0x0000009E
Localization set to 'tr-TR'
Found 517 officially revoked UEFI bootloaders from embedded list
Found 2351 additional revoked UEFI bootloaders from this system's SKUSiPolicy.p7b
Notice: Windows VDS is unavailable
Found USB 2.0 device 'USB Flash Disk USB Device' (090C:1000)
1 device found
No volume information for drive 0x85
Disk type: Removable, Disk size: 4GB, Sector size: 512 bytes
Cylinders: 489, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 0
Disk ID: 0x00000000
read_sectors: Read error [0x00000015] (NB: This system was unable to provide an English error message)
Read: 0, Expected: 512
StartSector: 0x00000000, nSectors: 0x1, SectorSize: 0x200
Drive does not have a Boot Marker
Scanning image...
ISO analysis:
Image is a UDF image
Disk image analysis:
Image does not have a Boot Marker
ISO label: 'GSP1RMCHBFRER_TR_DVD'
Detected: Windows 7 ISO (Build 7601.17514)
Size: 2.3 GB (Projected)
Uses: Bootmgr (BIOS only)
Uses: Install.wim (version 0.13.1)
Using image: tr_windows_7_home_basic_with_sp1_x86_dvd_u_676488.iso (2.3 GB)
Timeout while retrieving conflicting process list

Format operation started
Requesting disk access...
Will use 'H:' as volume mountpoint
Warning: Could not delete partition(s): VDS is not available
read_sectors: Read error [0x00000015] (NB: This system was unable to provide an English error message)
Read: 0, Expected: 512
StartSector: 0x00000000, nSectors: 0x1, SectorSize: 0x200
Opened \\.\PhysicalDrive5 for shared write access
Requesting logical volume handle...
Analyzing existing boot records...
read_sectors: Read error [0x00000015] (NB: This system was unable to provide an English error message)
Read: 0, Expected: 512
StartSector: 0x00000000, nSectors: 0x1, SectorSize: 0x200
Drive does not have a Boot Marker
Clearing MBR/PBR/GPT structures...
Erasing 128 sectors
Write error [0x00000079] (NB: This system was unable to provide an English error message)
Retrying in 5 seconds...
Write error [0x00000079] (NB: This system was unable to provide an English error message)
Retrying in 5 seconds...
Write error [0x00000079] (NB: This system was unable to provide an English error message)
Retrying in 5 seconds...
Write error [0x00000079] (NB: This system was unable to provide an English error message)
Could not reset partitions
Re-mounted volume as H: after error

Found USB 2.0 device 'USB Flash Disk USB Device' (090C:1000)
1 device found
No volume information for drive 0x85
Disk type: Removable, Disk size: 4GB, Sector size: 512 bytes
Cylinders: 489, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 0
Disk ID: 0x00000000
read_sectors: Read error [0x00000015] (NB: This system was unable to provide an English error message)
Read: 0, Expected: 512
StartSector: 0x00000000, nSectors: 0x1, SectorSize: 0x200
Drive does not have a Boot Marker
Found USB 2.0 device 'USB Flash Disk USB Device' (090C:1000)
1 device found
No volume information for drive 0x85
Disk type: Removable, Disk size: 4GB, Sector size: 512 bytes
Cylinders: 489, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 0
Disk ID: 0x00000000
read_sectors: Read error [0x00000015] (NB: This system was unable to provide an English error message)
Read: 0, Expected: 512
StartSector: 0x00000000, nSectors: 0x1, SectorSize: 0x200
Drive does not have a Boot Marker

Rufus ile söylediğiniz gibi herhangi bir iso dosyasını yazdırmaya çalıştığımda bu şekilde hata oluyor. Yardımcı olabilir misiniz? Aynı hatayı alıyorum konu sahibi ile. Cmd işe yaramıyor. Sizin dediğinizde işe yaramadı. Ne yapabilirim?
Rufustaki hata ekte.
 

Dosya Ekleri

  • Adsız.jpg
    Adsız.jpg
    63,2 KB · Görüntüleme: 50

Bu konuyu görüntüleyen kullanıcılar

Technopat Haberler

Yeni konular

Geri
Yukarı