Çözüm Windows 10 MEMORY_MANAGEMENT Mavi Ekran Hatası

Bu konu bir çözümü açıklamaktadır. Herhangi bir çözüm açıklanmadığını düşünüyorsanız konuyu rapor edebilirsiniz.
Katılım
25 Mayıs 2017
Mesajlar
28
Daha fazla  
Cinsiyet
Erkek
Arkadaşlar minidump dosyaları aşağıdaki linktedir. Format atacağım ama donanımsaldır diye girişmiyorum.

Minidump dosyaları.rar

Şuan yeniden bir hata aldım "PAGE NON FAULT" gibi bir şeydi.

Evet arkadaşlar bad pool header adlı bir mavi ekran hatası daha aldım ve bilgisayar kendine reset atarken bu çıktı.

hata.jpg
 
Bellek arızası olması muhtemel. Test edin, kırmızı girdi çıkarsa bellekleri değiştirmeniz gerekebilir:

Memtest86+ USB'den Çalışan RAM Bellek Test Programı


Kod:
*** STOP: 0x0000001a (0x0000000000003455, 0xffffc984de933580, 0xffffc984e278e350,
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff801307f73f0 base at 0xfffff8013068b000 DateStamp
0x59327910
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff80873562f5c, 0x0000000000000000, 
0xffffffffffffffff)
*** USBPORT.SYS - Address 0xfffff80873562f5c base at 0xfffff80873550000 DateStamp 
0xce983203

*** STOP: 0xc000021a (0xffffb806ed522c70, 0xffffffffc0000428, 0x0000000000000000, 
0x000001d94f7e0000)
*** ntoskrnl.exe - Address 0xfffff802c038a3f0 base at 0xfffff802c021e000 DateStamp 
0x59327910

*** STOP: 0x00000154 (0xffffcc009af6a000, 0xffff82810ef0c990, 0x0000000000000001, 
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff80387df63f0 base at 0xfffff80387c8a000 DateStamp 
0x59327910

*** STOP: 0x00000154 (0xffffcd05db6d8000, 0xffffbb015716d840, 0x0000000000000001, 
0x0000000000000000)
*** rdyboost.sys - Address 0xfffff80c3f7604cf base at 0xfffff80c3f740000 DateStamp 
0xca830c4c
 
Merhaba Recep abi,
Dediğin gibi belleği test ettim bozuk cikti, yeni calisan bellek taktim ama hala mavi ekran hatalari devam ediyor. Ne yapmaliyim?

Yeni minidump dosyaları: minidump dosyası
Hata kodları: "Bad pool header", "page faultın nonpaged area", "System service exception"
 
Son düzenleyen: Moderatör:
İşlemcin Intel ise işlemciyi sök ve geri tak. Geri takınca soğutucuyu çok sıkma.

İkinci bir ihtimal de yeni aldığın belleğin de arızalı olabileceği. Marka/model belirt.

Kod:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: ffffd900f59fc520, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8010d2d9147, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.Sec
    Value: 2

    Key  : Analysis.DebugAnalysisProvider.CPP
    Value: Create: 8007007e on DESKTOP-G25IS1E

    Key  : Analysis.DebugData
    Value: CreateObject

    Key  : Analysis.DebugModel
    Value: CreateObject

    Key  : Analysis.Elapsed.Sec
    Value: 13

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 68

    Key  : Analysis.System
    Value: CreateObject


ADDITIONAL_XML: 1

BUGCHECK_CODE:  50

BUGCHECK_P1: ffffd900f59fc520

BUGCHECK_P2: 0

BUGCHECK_P3: fffff8010d2d9147

BUGCHECK_P4: 2

READ_ADDRESS: fffff8010d678358: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
fffff8010d5d1ff0: Unable to get Flags value from nt!KdVersionBlock
 ffffd900f59fc520

MM_INTERNAL_CODE:  2

BLACKBOXBSD: 1 (!blackboxbsd)


CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  svchost.exe

TRAP_FRAME:  ffff8f0109cca040 -- (.trap 0xffff8f0109cca040)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffd900f59fc520 rbx=0000000000000000 rcx=ffff8f0109cca390
rdx=0000024416c5d7df rsi=0000000000000000 rdi=0000000000000000
rip=fffff8010d2d9147 rsp=ffff8f0109cca1d0 rbp=ffff8f0109cca8a0
 r8=0000000000000000  r9=0000000000001000 r10=fffff8010d6157c0
r11=0000024416c5d7df r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz ac pe nc
nt!MiMakePageAvoidRead+0x87:
fffff801`0d2d9147 4c8b28          mov     r13,qword ptr [rax] ds:ffffd900`f59fc520=????????????????
Resetting default scope

STACK_TEXT: 
ffff8f01`09cc9da8 fffff801`0d438f32 : 00000000`00000050 ffffd900`f59fc520 00000000`00000000 ffff8f01`09cca040 : nt!KeBugCheckEx
ffff8f01`09cc9db0 fffff801`0d324246 : 00000000`00000000 ffffd900`f59fc520 ffff8f01`09cca040 ffffd901`f55d7080 : nt!MiSystemFault+0x116e92
ffff8f01`09cc9e50 fffff801`0d40cc72 : ffffe947`80000000 00000000`00000014 00000000`00000002 00000000`00000000 : nt!MmAccessFault+0xae6
ffff8f01`09cca040 fffff801`0d2d9147 : fffffb80`0335a330 fffffb80`0335a330 ffff8f01`09cca8a0 00000000`00000000 : nt!KiPageFault+0x132
ffff8f01`09cca1d0 fffff801`0d2d8a86 : 0a000000`578c3963 00000000`00023861 00000000`00000000 00000000`1daa3861 : nt!MiMakePageAvoidRead+0x87
ffff8f01`09cca350 fffff801`0d2d81bf : 00000000`00000000 00000244`16c5d7df ffff8f01`00000000 ffff8f01`09cca411 : nt!MmCopyToCachedPage+0x186
ffff8f01`09cca420 fffff801`0d2d7541 : ffffd901`f5f8eae0 00000244`16c5d7df ffff8f01`09cca5e0 00000000`00000000 : nt!CcMapAndCopyInToCache+0x31f
ffff8f01`09cca580 fffff800`e3d05566 : ffff9f03`776f1c28 ffff8f01`09cca800 ffffd901`00000000 ffff9f03`776f1c00 : nt!CcCopyWriteEx+0x111
ffff8f01`09cca600 fffff800`e3d04574 : ffffd901`f6c0b298 00000000`00000000 00000000`00000000 ffffd901`f6c0b298 : NTFS!NtfsCommonWrite+0xd26
ffff8f01`09cca870 fffff800`e371563d : ffffd901`f7c7f010 ffffd901`f55e9b40 ffffd901`f4d92960 ffffd901`f55e9f70 : NTFS!NtfsFsdWrite+0x1d4
ffff8f01`09cca930 fffff800`e37134d6 : ffff8f01`09cca9c0 00000000`00000001 ffff8f01`09ccaa1c 00000000`00000001 : FLTMGR!FltpLegacyProcessingAfterPreCallbacksCompleted+0x18d
ffff8f01`09cca9a0 fffff801`0d72d6af : ffffd901`f3b79ab0 ffffd901`f55e9b40 ffffd901`f55e9fb8 00000001`00000000 : FLTMGR!FltpDispatch+0xb6
ffff8f01`09ccaa00 fffff801`0d7569b8 : ffff9f03`00000001 00000000`00000004 ffffd901`f33f5220 ffff8f01`09ccacc0 : nt!IopSynchronousServiceTail+0x1af
ffff8f01`09ccaac0 fffff801`0d40e313 : 00000000`746c6644 00000000`00000000 00000000`00000000 00000244`16c09d70 : nt!NtWriteFile+0x6d8
ffff8f01`09ccabd0 00007ffc`dd0d54b4 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
000000e1`457ff698 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffc`dd0d54b4


SYMBOL_NAME:  nt!MiMakePageAvoidRead+87

MODULE_NAME: nt

IMAGE_VERSION:  10.0.15063.413

STACK_COMMAND:  .thread ; .cxr ; kb

IMAGE_NAME:  memory_corruption

BUCKET_ID_FUNC_OFFSET:  87

FAILURE_BUCKET_ID:  AV_R_INVALID_nt!MiMakePageAvoidRead

OS_VERSION:  10.0.15063.0

BUILDLAB_STR:  rs2_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {c63fd351-30dc-f312-e8b5-c37b331b82b6}

Followup:     MachineOwner
---------
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80161e8d2e1, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.Sec
    Value: 2

    Key  : Analysis.DebugAnalysisProvider.CPP
    Value: Create: 8007007e on DESKTOP-G25IS1E

    Key  : Analysis.DebugData
    Value: CreateObject

    Key  : Analysis.DebugModel
    Value: CreateObject

    Key  : Analysis.Elapsed.Sec
    Value: 92

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 78

    Key  : Analysis.System
    Value: CreateObject


ADDITIONAL_XML: 1

BUGCHECK_CODE:  1e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff80161e8d2e1

BUGCHECK_P3: 0

BUGCHECK_P4: ffffffffffffffff

READ_ADDRESS: fffff803c146b358: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
fffff803c13c4ff0: Unable to get Flags value from nt!KdVersionBlock
 ffffffffffffffff

EXCEPTION_PARAMETER2:  ffffffffffffffff

BLACKBOXBSD: 1 (!blackboxbsd)


CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

TRAP_FRAME:  ffffc78300000001 -- (.trap 0xffffc78300000001)
Unable to read trap frame at ffffc783`00000001

STACK_TEXT: 
fffff803`c2e59e18 fffff803`c12850f6 : 00000000`0000001e ffffffff`c0000005 fffff801`61e8d2e1 00000000`00000000 : nt!KeBugCheckEx
fffff803`c2e59e20 fffff803`c11fc8cd : fffff803`c1414000 fffff803`c108a000 000536f4`00889000 00000000`00000000 : nt!KiFatalExceptionHandler+0x22
fffff803`c2e59e60 fffff803`c10b5d94 : 00000000`00000000 fffff803`c2e59f90 00000000`00000000 00000000`00000006 : nt!RtlpExecuteHandlerForException+0xd
fffff803`c2e59e90 fffff803`c10b4b36 : fffff803`c2e5ad68 fffff803`c2e5aab0 fffff803`c2e5ad68 fffff803`c2e5ad68 : nt!RtlDispatchException+0x404
fffff803`c2e5a580 fffff803`c120188e : ffffc783`784b41a0 00000000`00000000 ffffc783`00000001 00000000`00000000 : nt!KiDispatchException+0x1f6
fffff803`c2e5ac30 fffff803`c11ffb34 : 00000000`00000000 00000000`00006efe 29671af8`00544208 159c614c`09dc2828 : nt!KiExceptionDispatch+0xce
fffff803`c2e5ae10 fffff801`61e8d2e1 : ffffc783`78c02c20 ffffc783`78c02ba8 ffffc783`79483000 00000000`00000002 : nt!KiGeneralProtectionFault+0xf4
fffff803`c2e5afa0 fffff801`61fab537 : ffffc783`789fba00 00000000`00000000 ffffc783`79483000 fffff803`c1409b80 : netr28ux!REPORT_ETHERNET_FRAME_TO_LLC+0x1a1
fffff803`c2e5b010 fffff801`61e9b749 : ffffc783`790c6018 ffffc783`790c6028 ffffc783`790c6000 ffffc783`790c6000 : netr28ux!QosBADataParse+0x75b
fffff803`c2e5b0b0 fffff801`61f99166 : ffffc783`78c00000 ffffc783`789fbe00 ffffc783`78630602 00000000`00000000 : netr28ux!RTUSBRxPacket+0x4371
fffff803`c2e5b270 fffff801`5ddb12fe : ffffc783`789fbe60 ffffc783`7809e810 ffffc783`78f31e68 00000000`00000000 : netr28ux!RTUSBBulkRxComplete+0x216
fffff803`c2e5b2e0 fffff801`5ddb0a90 : 00000000`00000000 00000000`00000001 ffffc783`789fbe60 00000000`00000000 : Wdf01000!FxRequestBase::CompleteSubmitted+0x60e [minkernel\wdf\framework\shared\core\fxrequestbase.cpp @ 523]
fffff803`c2e5b3a0 fffff803`c119c728 : ffffc783`784b4050 00000000`00000002 00000000`00000000 ffffc783`77ab72f8 : Wdf01000!FxIoTarget::_RequestCompletionRoutine+0xd0 [minkernel\wdf\framework\shared\targets\general\fxiotarget.cpp @ 2448]
fffff803`c2e5b410 fffff803`c10f6107 : ffffc783`789fbc50 fffff803`c2e5b540 00000000`00000000 ffffc783`789fbdfb : nt!IopUnloadSafeCompletion+0x58
fffff803`c2e5b440 fffff801`61b82ea3 : ffffc783`7657a680 ffffc783`77afc000 ffffc783`77afc1a0 ffffc783`00000000 : nt!IopfCompleteRequest+0x117
fffff803`c2e5b570 fffff801`61b80fbe : 00000000`00000002 ffffc783`7a2de57c ffffc783`77afd0e8 00000000`00000000 : USBPORT!USBPORT_Core_iCompleteDoneTransfer+0x873
fffff803`c2e5b910 fffff801`61b7dceb : ffffc783`7a2de6b4 ffffc783`77afd180 ffffc783`77afc1a0 fffff801`00000000 : USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x21e
fffff803`c2e5b970 fffff801`61b7da54 : 00000000`00000000 ffffc783`77afc050 ffffc783`77aa5002 ffffc783`75f01010 : USBPORT!USBPORT_Core_UsbIocDpc_Worker+0x23b
fffff803`c2e5b9e0 fffff803`c10fcb6c : fffff803`c2e5bb60 00000000`00000000 fffff803`c02b0180 00000000`00000002 : USBPORT!USBPORT_Xdpc_Worker_IocDpc+0x204
fffff803`c2e5ba60 fffff803`c10fc477 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiExecuteAllDpcs+0x1dc
fffff803`c2e5bba0 fffff803`c11f949a : 00000000`00000000 fffff803`c02b0180 00000000`001a6fe0 fffff803`c1483a40 : nt!KiRetireDpcList+0xd7
fffff803`c2e5bda0 00000000`00000000 : fffff803`c2e5c000 fffff803`c2e56000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5a


SYMBOL_NAME:  netr28ux!REPORT_ETHERNET_FRAME_TO_LLC+1a1

MODULE_NAME: netr28ux

IMAGE_NAME:  netr28ux.sys

IMAGE_VERSION:  5.1.22.0

STACK_COMMAND:  .thread ; .cxr ; kb

BUCKET_ID_FUNC_OFFSET:  1a1

FAILURE_BUCKET_ID:  0x1E_c0000005_R_netr28ux!REPORT_ETHERNET_FRAME_TO_LLC

OS_VERSION:  10.0.15063.0

BUILDLAB_STR:  rs2_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {f3faef62-8d45-c55c-68ce-97eaeb902110}

Followup:     MachineOwner
---------
UNEXPECTED_STORE_EXCEPTION (154)
The store component caught an unexpected exception.
Arguments:
Arg1: ffff9e0e49608000, Pointer to the store context or data manager
Arg2: ffffe281af9bc9b0, Exception information
Arg3: 0000000000000001, Reserved
Arg4: 0000000000000000, Reserved

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for win32k.sys

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.Sec
    Value: 2

    Key  : Analysis.DebugAnalysisProvider.CPP
    Value: Create: 8007007e on DESKTOP-G25IS1E

    Key  : Analysis.DebugData
    Value: CreateObject

    Key  : Analysis.DebugModel
    Value: CreateObject

    Key  : Analysis.Elapsed.Sec
    Value: 19

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 66

    Key  : Analysis.System
    Value: CreateObject


ADDITIONAL_XML: 1

BUGCHECK_CODE:  154

BUGCHECK_P1: ffff9e0e49608000

BUGCHECK_P2: ffffe281af9bc9b0

BUGCHECK_P3: 1

BUGCHECK_P4: 0

EXCEPTION_RECORD:  ffffe281af9bd8f8 -- (.exr 0xffffe281af9bd8f8)
ExceptionAddress: fffff80bf495c47e (rdyboost!memset+0x00000000000060be)
   ExceptionCode: c0000420 (Assertion failure)
  ExceptionFlags: 00000000
NumberParameters: 0

EXCEPTION_PARAMETER1:  ffff9e0e49c9bec8

EXCEPTION_PARAMETER2:  0000000000005eeb

CONTEXT:  ffffe281af9bd140 -- (.cxr 0xffffe281af9bd140)
rax=00000000c0000225 rbx=ffff9e0e49608050 rcx=00000000f36f0a12
rdx=ffff9e0e49fd1070 rsi=0000000000015007 rdi=ffff9e0e496080e8
rip=fffff80bf495c47e rsp=ffffe281af9bdb30 rbp=0000000000000000
 r8=000000004dc9551f  r9=ffff9e0e49c9bec8 r10=0000000000005eeb
r11=ffff9e0e49d51000 r12=ffff9e0e49608068 r13=ffff9e0e49fcf000
r14=ffff9e0e49fd1088 r15=ffff9e0e49fd1088
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00000282
rdyboost!memset+0x60be:
fffff80b`f495c47e cd2c            int     2Ch
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

ERROR_CODE: (NTSTATUS) 0xc0000420 - Onaylama hatas  olu tu.

EXCEPTION_CODE_STR:  c0000420

EXCEPTION_STR:  0xc0000420

STACK_TEXT: 
ffffe281`af9bdb30 fffff80b`f4950968 : ffff9e0e`49fd1088 00000000`0405ea4e ffffe281`af9bdbe9 00000000`00000000 : rdyboost!memset+0x60be
ffffe281`af9bdb70 fffff80b`f494fc99 : ffff9e0e`49608000 fffff80b`f494dca1 00000000`00000000 00000000`00000002 : rdyboost!ST_STORE<SMD_TRAITS>::StDmPageRemove+0x368
ffffe281`af9bdc50 fffff80b`f494db11 : ffffe281`af1bb048 00000000`00000001 ffff9e0e`49608000 ffffe281`af1bb048 : rdyboost!ST_STORE<SMD_TRAITS>::StWorkItemProcess+0x119
ffffe281`af9bdca0 fffff80b`f49556d1 : ec8b55ff`00000000 458d00fc`00000000 00000000`00000001 ffffe281`af20f000 : rdyboost!SMKM_STORE<SMD_TRAITS>::SmStWorker+0x141
ffffe281`af9bdd20 fffff801`e1cdda37 : ffff9e0e`49608000 fffff801`e1d727f7 00000000`0038373d ffff9e0e`49652040 : rdyboost!SMKM_STORE<SMD_TRAITS>::SmStWorkerThread+0x11
ffffe281`af9bdd50 fffff801`e1d72876 : ffffe281`af200180 ffff9e0e`49652040 fffff801`e1cdd9f0 ce8bec75`8b3c478b : nt!PspSystemThreadStartup+0x47
ffffe281`af9bdda0 00000000`00000000 : ffffe281`af9be000 ffffe281`af9b8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16


SYMBOL_NAME:  rdyboost!memset+60be

MODULE_NAME: rdyboost

IMAGE_NAME:  rdyboost.sys

IMAGE_VERSION:  10.0.15063.413

STACK_COMMAND:  .cxr 0xffffe281af9bd140 ; kb

BUCKET_ID_FUNC_OFFSET:  60be

FAILURE_BUCKET_ID:  0x154_c0000420_rdyboost!memset

OS_VERSION:  10.0.15063.0

BUILDLAB_STR:  rs2_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {d8ceb239-bf51-bb45-d0e8-3face644ed01}

Followup:     MachineOwner
---------
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault).  The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
Else
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: fffff80061e6be70
Arg3: fffff80061e52000
Arg4: fffff807226738c4

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.Sec
    Value: 2

    Key  : Analysis.DebugAnalysisProvider.CPP
    Value: Create: 8007007e on DESKTOP-G25IS1E

    Key  : Analysis.DebugData
    Value: CreateObject

    Key  : Analysis.DebugModel
    Value: CreateObject

    Key  : Analysis.Elapsed.Sec
    Value: 10

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 67

    Key  : Analysis.System
    Value: CreateObject


ADDITIONAL_XML: 1

BUGCHECK_CODE:  7f

BUGCHECK_P1: 8

BUGCHECK_P2: fffff80061e6be70

BUGCHECK_P3: fffff80061e52000

BUGCHECK_P4: fffff807226738c4

TRAP_FRAME:  fffff80061e6be70 -- (.trap 0xfffff80061e6be70)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffff807226710f0
rdx=000000dd8daff368 rsi=0000000000000000 rdi=0000000000000000
rip=fffff807226738c4 rsp=fffff80061e52000 rbp=ffffca8136dfcef0
 r8=00000000d5a0b346  r9=242766f57ccb4a4f r10=00000000000024fe
r11=0000000000004a4f r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
clipsp+0x38c4:
fffff807`226738c4 51              push    rcx
Resetting default scope

BLACKBOXBSD: 1 (!blackboxbsd)


CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  SearchUI.exe

BAD_STACK_POINTER:  fffff80061e52000

STACK_TEXT: 
fffff800`61e6bd28 fffff800`6018d7a9 : 00000000`0000007f 00000000`00000008 fffff800`61e6be70 fffff800`61e52000 : nt!KeBugCheckEx
fffff800`61e6bd30 fffff800`6018b5f3 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`61e6be70 fffff807`226738c4 : 36dfedd0`00000000 00000000`ffffca81 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb3
fffff800`61e52000 36dfedd0`00000000 : 00000000`ffffca81 00000000`00000000 00000000`00000000 61e6c000`00000000 : clipsp+0x38c4
fffff800`61e52008 00000000`ffffca81 : 00000000`00000000 00000000`00000000 61e6c000`00000000 61e70000`fffff800 : 0x36dfedd0`00000000
fffff800`61e52010 00000000`00000000 : 00000000`00000000 61e6c000`00000000 61e70000`fffff800 61e6e000`fffff800 : 0xffffca81


SYMBOL_NAME:  clipsp+38c4

MODULE_NAME: clipsp

IMAGE_NAME:  clipsp.sys

IMAGE_VERSION:  10.0.15063.0

STACK_COMMAND:  .thread ; .cxr ; kb

BUCKET_ID_FUNC_OFFSET:  38c4

FAILURE_BUCKET_ID:  0x7f_8_STACKPTR_ERROR_clipsp!unknown_function

OS_VERSION:  10.0.15063.0

BUILDLAB_STR:  rs2_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {48f2dfdf-6e28-ad4e-f693-f41bb475ff86}

Followup:     MachineOwner
---------
 
Uyarı! Bu konu 6 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Technopat Haberler

Yeni konular

Geri
Yukarı