Çözüm Windows 8 MEMORY_MANAGEMENT mavi ekran hatası

Bu konu bir çözümü açıklamaktadır. Herhangi bir çözüm açıklanmadığını düşünüyorsanız konuyu rapor edebilirsiniz.
Mavi ekran hatası oluyor ve ekranda kalıyor mu? Yoksa mavi ekran hatası olup hemen PC Restart mı atıyor?

Hemen reset atıyorsa işlemcin ısınıyor olmalı sıcaklıkları paylaş.

Değilse sırf RAM'de sorun beklememek lazım, belki güç kaynağında sorun var.
 
Senin sorunun Norton ve Ekran kartından kaynaklı gözüküyor. Nortonu kaldırın ve ekran kartı driverini güncelleyin.
Usb 3.0 Driverinde de Sorun olduğu gözüküyor, Driveri silip tekrar yükleyin. Ramde de Sorun olduğu gözküyor, Ayrıca şu komutları çalıştırın "chkdsk /f /r" , "sfc /scannow" HDTune 5.0 ile errorscan yapıp sonuç resmini paylaşın.
 
İlk olarak Memtest sorun var dediyse vardır. RAM'ler değişecek. Hangi marka laptop bu? Hatalar bariz gösteriyor ki RAM'ler bozuk!

Bunun dışında bu sisteme siz mi sürücü kurdunuz? Kurduysanız nerden kurdunuz?

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: dxgmms1.sys

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff88005e266f9, 0xfffff88006aa2468, 
0xfffff88006aa1ca0)

*** dxgmms1.sys - Address 0xfffff88005e23c02 base at 0xfffff88005e00000 DateStamp 
0x50eceb02
Kod:
*** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff8800601cd6b, 0xfffff88007fb6708, 
0xfffff88007fb5f40)

*** dxgmms1.sys - Address 0xfffff88006056427 base at 0xfffff88006017000 DateStamp 
0x50eceb02
Kod:
*** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff88005c6b312, 0xfffff880079e8468, 
0xfffff880079e7ca0)

*** dxgmms1.sys - Address 0xfffff88005c47ae0 base at 0xfffff88005c45000 DateStamp 
0x50eceb02
Kod:
*** STOP: 0x00000139 (0x0000000000000003, 0xfffff8800e38b6d0, 0xfffff8800e38b628, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff80288a6f240 base at 0xfffff80288a15000 DateStamp 
0x513814ba
Kod:
*** STOP: 0x00000139 (0x0000000000000003, 0xfffff88002e697f0, 0xfffff88002e69748, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff8009bc79240 base at 0xfffff8009bc1f000 DateStamp 
0x513814ba
Kod:
*** STOP: 0x00000139 (0x0000000000000003, 0xfffff88006751510, 0xfffff88006751468, 
0x0000000000000000)

*** nvlddmkm.sys - Address 0xfffff880069a18a1 base at 0xfffff880068cd000 DateStamp 
0x51427b3c


Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: nvlddmkm.sys

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x000000d1 (0x000000000000a658, 0x0000000000000002, 0x0000000000000000, 
0xfffff88005bb8a5a)

*** nvlddmkm.sys - Address 0xfffff88006798681 base at 0xfffff880066e0000 DateStamp 
0x51427b3c
Kod:
*** STOP: 0x000000d1 (0x0000000000000011, 0x0000000000000002, 0x0000000000000000, 
0xfffff88001b3d7c6)

*** tcpip.sys - Address 0xfffff88001b3d7c6 base at 0xfffff88001ace000 DateStamp 
0x51303549


Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

UNEXPECTED_KERNEL_MODE_TRAP

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000007f (0x0000000000000008, 0xfffff88002ae3db0, 0x00000000000003a8, 
0xfffff802602a8872)

*** ntoskrnl.exe - Address 0xfffff802602d0440 base at 0xfffff80260276000 DateStamp 
0x5165e551
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: tcpip.sys

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x00000050 (0xfffff10005caaa6a, 0x0000000000000000, 0xfffff800630bb154, 
0x0000000000000002)

*** tcpip.sys - Address 0xfffff88001c992b3 base at 0xfffff88001c1e000 DateStamp 
0x51303549
Kod:
*** STOP: 0x00000050 (0xffffffffffffffb0, 0x0000000000000000, 0xfffff88005e5f8b3, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff800508c7240 base at 0xfffff8005086d000 DateStamp 
0x513814ba
Kod:
*** STOP: 0x00000050 (0xffffffffffffffd0, 0x0000000000000001, 0xfffff8001d284e3e, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff8001d0e4240 base at 0xfffff8001d08a000 DateStamp 
0x513814ba
Kod:
*** STOP: 0x00000050 (0xfffff95f8546c28a, 0x0000000000000008, 0xfffff95f8546c28a, 
0x0000000000000002)

*** ntoskrnl.exe - Address 0xfffff8016aad6440 base at 0xfffff8016aa7c000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x00000050 (0xfffff8a0cf063ee2, 0x0000000000000000, 0xfffff8002472d61f, 
0x0000000000000002)

*** ntoskrnl.exe - Address 0xfffff800246d4440 base at 0xfffff8002467a000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x00000050 (0xffffed8020369c49, 0x0000000000000000, 0xfffff800a7aaaacc, 
0x0000000000000002)

*** ntoskrnl.exe - Address 0xfffff800a7679440 base at 0xfffff800a761f000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x00000050 (0xfffff8a002fe8c80, 0x0000000000000000, 0xfffff803e18db79b, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff803e1878440 base at 0xfffff803e181e000 DateStamp 
0x5165e551
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

PFN_LIST_CORRUPT

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000004e (0x0000000000000099, 0x000000000017a9e7, 0x0000000000000000, 
0x0e00000000179587)

*** ntoskrnl.exe - Address 0xfffff8017b460240 base at 0xfffff8017b406000 DateStamp 
0x513814ba
Kod:
*** STOP: 0x0000004e (0x0000000000000099, 0x00000000001375cb, 0x0000000000000002, 
0x00000130001375c3)

*** ntoskrnl.exe - Address 0xfffff8009ba5b440 base at 0xfffff8009ba01000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000004e (0x0000000000000099, 0x00000000000d43e5, 0x0000000000000002, 
0x0800017000171046)

*** ntoskrnl.exe - Address 0xfffff8000cac6440 base at 0xfffff8000ca6c000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000004e (0x0000000000000099, 0x0000000000177575, 0x0000000000000000, 
0x0a0000000017ca15)

*** ntoskrnl.exe - Address 0xfffff8013ec78440 base at 0xfffff8013ec1e000 DateStamp 
0x5165e551


Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: win32k.sys

SYSTEM_SERVICE_EXCEPTION

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff9600019b5b4, 0xfffff8800c93ef90, 
0x0000000000000000)

*** win32k.sys - Address 0xfffff9600019b5b4 base at 0xfffff96000074000 DateStamp 
0x5148e456
Kod:
*** STOP: 0x0000003b (0x00000000c000001d, 0xfffff800312a9f2e, 0xfffff8800c83e7c0, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff80031278440 base at 0xfffff8003121e000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000003b (0x00000000c000001d, 0xfffff8038caa8ec9, 0xfffff8800e5d9590, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff8038ca71440 base at 0xfffff8038ca17000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000003b (0x00000000c000001d, 0xfffff8030bf65f8a, 0xfffff8800b936ec0, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff8030beca440 base at 0xfffff8030be70000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000003b (0x00000000c000001d, 0xfffff80291caad4f, 0xfffff8800bc86ed0, 
0x0000000000000000)

***  - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp 
0x00000000
Kod:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff960001f77f6, 0xfffff8800c246de0, 
0x0000000000000000)

*** win32k.sys - Address 0xfffff960001f77f6 base at 0xfffff960001c8000 DateStamp 
0x51637e38
Kod:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff802634497cb, 0xfffff8800d904e80, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff80263071440 base at 0xfffff80263017000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000003b (0x00000000c0000005, 0x000000000045b000, 0xfffff8800db619a0, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff80057474440 base at 0xfffff8005741a000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff9600006de09, 0xfffff8800d302e60, 
0x0000000000000000)

*** win32k.sys - Address 0xfffff9600006de09 base at 0xfffff96000031000 DateStamp 
0x51637e38


Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

CACHE_MANAGER

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x00000034 (0x0000000000050eec, 0xfffff880057d43c8, 0xfffff880057d3c00, 
0xfffff80189f2d34b)

*** ntoskrnl.exe - Address 0xfffff80189ed8440 base at 0xfffff80189e7e000 DateStamp 
0x5165e551

Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: Ntfs.sys

NTFS_FILE_SYSTEM

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x00000024 (0x000000b50019060b, 0xfffff88002f08c18, 0xfffff88002f08450, 
0xfffff801f152dd09)

*** Ntfs.sys - Address 0xfffff88001659c90 base at 0xfffff88001619000 DateStamp 
0x510cbf55


Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ucx01000.sys

KMODE_EXCEPTION_NOT_HANDLED

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8038152d6a7, 0x0000000000000001, 
0x0000000000000815)

*** ucx01000.sys - Address 0xfffff88007dce001 base at 0xfffff88007dbf000 DateStamp 
0x505ab2ba
Kod:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8032cecfde2, 0x0000000000000001, 
0x00000000000002a0)

*** ntoskrnl.exe - Address 0xfffff8032ced5440 base at 0xfffff8032ce7b000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x0000001e (0xffffffffc000001d, 0xfffff88005e1ffc8, 0xfffff800d39cd800, 
0x0000000000000002)

*** dxgmms1.sys - Address 0xfffff88005e1ffc8 base at 0xfffff88005e18000 DateStamp 
0x50eceb02


Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: tcpip.sys

MEMORY_MANAGEMENT

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000001a (0x0000000000041284, 0x0000000016b5a001, 0x0000000000028567, 
0xfffff70001080000)

*** tcpip.sys - Address 0xfffff88001a9bfe4 base at 0xfffff88001a49000 DateStamp 
0x51303549
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: nvlddmkm.sys

MEMORY_MANAGEMENT

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000001a (0x0000000000041284, 0x000000cf90765001, 0x0000000000002e77, 
0xfffff70001080000)

*** nvlddmkm.sys - Address 0xfffff880067c75c1 base at 0xfffff880066de000 DateStamp 
0x51427b3c
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: dxgmms1.sys

BAD_POOL_HEADER

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x00000019 (0x0000000000000003, 0xfffff8a0034a0e20, 0x0000000000000000, 
0xfffff8a0034a0e20)

*** dxgmms1.sys - Address 0xfffff8800582f008 base at 0xfffff88005811000 DateStamp 
0x50eceb02
Kod:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0xfffff3000afc8bf8, 0x0000000000000002, 0x0000000000000001, 
0xfffff801000ba410)

*** ntoskrnl.exe - Address 0xfffff8010008b040 base at 0xfffff80100010000 DateStamp 
0x5010ac4b
Kod:
*** STOP: 0x0000000a (0x00000000009f15a8, 0x0000000000000002, 0x0000000000000000, 
0xfffff8021c63eacb)

*** ntoskrnl.exe - Address 0xfffff8021c661240 base at 0xfffff8021c607000 DateStamp 
0x513814ba
Kod:
*** STOP: 0x0000000a (0x00000000009f15a8, 0x0000000000000002, 0x0000000000000000, 
0xfffff80094a42acb)

*** ntoskrnl.exe - Address 0xfffff80094a65240 base at 0xfffff80094a0b000 DateStamp 
0x513814ba
Kod:
*** STOP: 0x0000000a (0xffffffffffffff8d, 0x0000000000000002, 0x0000000000000001, 
0xfffff802937cf5b4)

*** ntoskrnl.exe - Address 0xfffff8029366c440 base at 0xfffff80293612000 DateStamp 
0x5165e551
Kod:
*** STOP: 0x00000001 (0x000007ff45702e1a, 0x0000000000000000, 0x0000000000010000, 
0xfffff8800c3ffb00)

*** ntoskrnl.exe - Address 0xfffff80092c66240 base at 0xfffff80092c0c000 DateStamp 
0x513814ba
 
Komutları calıstırdım. Nortonu kaldırdım. Ekran kartını dun guncellemıstım. HDtune ile error scan yaptım 0 damage. Sorum su format atsam veya win 7 ye donsem duzelme ıhtımalı var mı?

- - - Güncellendi - - -

Laptop deil masaisti bilgisayar. Sorunda memtestte hata cıkmasına ragmen yetkili servisin urun hakkında sorunsuz demesi.
 
Dediklerimi yaptıkdan sonra mavi ekranlar azalacaktır. Ramlerden birini çıkartın 4 ram varsa 2 sini çıkartın öyle deneyin.
Format atıp sadece windows güncellemelerini yapıp kullansan Mavi ekranlar daha azalacaktır. Ancak ramde sorun var gözüktüğü için hala mavi ekran almaya devam edeceksin ram ile ilgili. Win8 yerine Win7 kullan.
 
Dediklerimi yaptıkdan sonra mavi ekranlar azalacaktır. Ramlerden birini çıkartın 4 ram varsa 2 sini çıkartın öyle deneyin.
Format atıp sadece windows güncellemelerini yapıp kullansan Mavi ekranlar daha azalacaktır. Ancak ramde sorun var gözüktüğü için hala mavi ekran almaya devam edeceksin ram ile ilgili. Win8 yerine Win7 kullan.

Windows 8 yerine Windows 7 kullanması bu sorunu nasıl çözecek?

Mavi ekranlar bitmez. Cihazı iade edin. Firmayı söyleyin bir de. Casper mı, nedir bu PC?
 
Uyarı! Bu konu 11 yıl önce açıldı.
Muhtemelen daha fazla tartışma gerekli değildir ki bu durumda yeni bir konu başlatmayı öneririz. Eğer yine de cevabınızın gerekli olduğunu düşünüyorsanız buna rağmen cevap verebilirsiniz.

Yeni konular

Geri
Yukarı