- Katılım
- 8 Aralık 2013
- Mesajlar
- 31.907
- Makaleler
- 25
- Çözümler
- 633
Evet, internet hızını sınırlamak istiyorum ama modem arayüzünü fazla bilmediğim için soruyorum, buradan limiti nasıl koyabiliriz acaba?
LABEL | DESCRIPTION |
Quality of Service | |
QoS | Use this field to turn on QoS to improve your network performance. You can give priority to traffic that the ZyXEL Device forwards out through the WAN interface. Give high priority to voice and video to make them run more smoothly. Similarly, give low priority to many large file downloads so that they do not reduce the quality of other applications. |
Summary | Click this to open a summary table showing the QoS settings. See Section 14.2.1 on page 171 for more details. |
Rule | |
Rule Index | Select the rule’s index number from the drop-down list box. |
Active | Use this field to enable or disable the rule. |
Application | Select an application from the drop-down list box. The Destination Port Range and Protocol ID fields may change depending on the type of applications you choose. |
Physical Ports | Select Enet1 to apply the rule to the Ethernet port or WLAN to apply the rule to wireless traffic. |
Destination MAC | Type a destination MAC address here. QoS is then applied to traffic containing this destination MAC address. Leave it blank to apply the rule to all MAC addresses. |
IP | Enter a destination IP address in dotted decimal notation. QoS is then applied to traffic containing this destination IP address. A blank destination IP address means any destination IP address. |
Mask | Enter a destination subnet mask here. |
Port Range | Either use the default value set by the application you choose, or enter the port number to which the rule should be applied. |
Source MAC | Type a source MAC address here. QoS is then applied to traffic containing this source MAC address. Leave it blank to apply the rule to all MAC addresses. |
IP | Enter a source IP address in dotted decimal notation. QoS is then applied to traffic containing this source IP address. A blank source IP address means any source IP address. |
Mask | Enter a source subnet mask here. |
Port Range | Enter the port number to which the rule should be applied. 0 means any source port number. See Appendix E on page 305 for some common services and port numbers. |
Protocol ID | Select an IP protocol type from the drop-down list box. |
Vlan ID Range | Enter the source VLAN ID in this field. |
IPP/DS Field | Select IPP/TOS to specify an IP precedence range and type of services. Select DSCP to specify a DiffServ Code Point (DSCP) range. |
IP Precedence Range | Enter a range from 0 to 7 for IP precedence. Zero is the lowest priority and seven is the highest. |
LABEL | DESCRIPTION |
Type of Service | Select a type of service from the drop-down list box. Available options are: Normal service, Minimize delay, Maximize throughput, Maximize reliability and Minimize monetary cost. |
DSCP Range | Specify a DSCP number between 0 and 63 in this field. |
802.1p | Select a priority level (0 to 7) from the drop-down list box. |
Action | |
IPP/DS Field | Select IPP/TOS to specify an IP precedence range and type of services. Select DSCP to specify a DiffServ Code Point (DSCP) range. |
IP Precedence Remarking | Enter a range from 0 to 7 to re-assign IP precedence to matched traffic. Zero is the lowest priority and seven is the highest. |
Type of Service Remarking | Select a type of service to re-assign the priority level to matched traffic. Available options are: Normal service, Minimize delay, Maximize throughput, Maximize reliability and Minimize monetary cost. |
DSCP Remarking | Specify a DSCP number between 0 and 63 to re-assign the priority level to matched traffic. |
802.1p Remarking | Select a priority level (0 to 7) to re-assign the priority level to matched traffic. |
Queue # | Specify a Low, Medium, High or Highest queue tag to matched traffic. Traffic assigned to a higher queue gets through faster while traffic in lower queues is dropped when there is network congestion. |
ADD | Click this to add the rule. |
DELETE | Click this to remove the rule. |
CANCEL | Click this to restore previously saved settings. |
Bu sitenin çalışmasını sağlamak için gerekli çerezleri ve deneyiminizi iyileştirmek için isteğe bağlı çerezleri kullanıyoruz.